The DOI matches its Crossref record.
The effects of impingement and dysplasia on stress distributions in the hip joint during sitting and walking: A finite element analysis
Open accessAbstract
Soft tissue damage has been observed in hip joints with pathological geometries. Our primary goal was to study the relationship between morphological variations of the bony components of the hip and resultant stresses within the soft tissues of the joint during routine daily activities. The secondary goal was to find the range of morphological parameters in which stresses are minimized. Computational models of normal and pathological joints were developed based on variations of morphological parameters of the femoral head (Alpha angle) and acetabulum (CE angle). The Alpha angle was varied between 40° (normal joint) and 80° (cam joint). The CE angle was varied between 0° (dysplastic joint) and 40° (pincer joint). Dynamic loads and motions for walking and standing to sitting were applied to all joint configurations. Contact pressures and stresses were calculated and crosscompared to evaluate the influence of morphology. The stresses in the soft tissues depended strongly on the head and acetabular geometry. For the dysplastic joint, walking produced high acetabular rim stresses. Conversely, for impinging joints, standing‐to‐sitting activities that involved extensive motion were critical, inducing excessive distortion and shearing of the tissue–bone interface. Zones with high von Mises stresses corresponded with clinically observed damage zones in the acetabular cartilage and labrum. Hip joint morphological parameters that minimized were 20° ≤ CE ≤ 30° and alpha ≤ 50°. © 2008 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 27:195–201, 2009
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
What Are the Radiographic Reference Values for Acetabular Under- and Overcoverage?
Tannast, M., Hanke, M. S., Zheng, G., Steppacher, S. D., & Siebenrock, K. A. (2015) · Clinical Orthopaedics & Related Research · doi:10.1007/s11999-014-4038-3 · Cited by 350
Wyles, C. C., Heidenreich, M. J., Jeng, J., Larson, D. R., Trousdale, R. T., & Sierra, R. J. (2017) · Clinical Orthopaedics & Related Research · doi:10.1007/s11999-016-4815-2 · Cited by 282
Patient-specific analysis of cartilage and labrum mechanics in human hips with acetabular dysplasia
Henak, C. R., Abraham, C. L., Anderson, A. E., Maas, S. A., Ellis, B. J., Peters, C. L., & Weiss, J. A. (2014) · Osteoarthritis and Cartilage · doi:10.1016/j.joca.2013.11.003 · Cited by 172
Bagwell, J. J., Snibbe, J., Gerhardt, M., & Powers, C. M. (2016) · Clinical Biomechanics · doi:10.1016/j.clinbiomech.2015.09.016 · Cited by 115
Ng, K. C. G., Lamontagne, M., Labrosse, M. R., & Beaulé, P. E. (2016) · PLoS ONE · doi:10.1371/journal.pone.0147813 · Cited by 54
“Their mixed impingement cases demonstrated slightly higher peak contact pressures from 10.52 to 16.51 MPa (alpha angle = 60 to 80°, CE angle = 40°); and much higher von Mises stresses from 30 to 37 MPa (alpha angle = 60 to 80°, CE angle = 40°), situated at the anterosuperior cartilage and labrum.”
InfluentialAkiyama, K., Sakai, T., Koyanagi, J., Yoshikawa, H., & Sugamoto, K. (2011) · Osteoarthritis and Cartilage · doi:10.1016/j.joca.2011.01.017 · Cited by 48
The influence of squat kinematics and cam morphology on acetabular stress
Bagwell, J. J., & Powers, C. M. (2017) · Arthroscopy · doi:10.1016/j.arthro.2017.03.018 · Cited by 22
Ferraz, M. V. S., Bastos, F. S., Souza, B. G. S., & Vecchio, S. D. (2022) · Journal of the Brazilian Society of Mechanical Sciences and Engineering · doi:10.1007/s40430-022-03566-z · Cited by 2
“[7] presented a methodology for the analysis of the stress distribution on the hip structure during sitting and walking.”
BackgroundMethodInfluential
Metadata
- Authors
- Chegini, S., Beck, M., & Ferguson, S. J.
- Venue
- Journal of Orthopaedic Research
- Publisher
- Wiley
- Published
- 2008-08-27
- Volume
- 27
- Issue
- 2
- Pages
- 195-201
- ISSN
- 0736-0266 (ISSN-L)
- 1554-527X
- OpenAlex
- W2034063939
- Cited by
- 193
- References
- 0
- FWCI
- 6.14
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.