Biocomposites of Plasticized Starch Reinforced with Cellulose Crystallites from Cottonseed Linter
The DOI matches its Crossref record; 35 of the 36 references it cites were found in a registry or an index.
Abstract
Environmentally friendly starch biocomposites were successfully developed using a colloidal suspension of cottonseed linter cellulose crystallite as a filler to reinforce glycerol plasticized starch (PS). The cellulose crystallites, having lengths of 350 +/- 70 nm and diameters of 40 +/- 8 nm on average, were prepared from cottonseed linters by acid hydrolysis. The dependence of morphology and properties of the PS-based biocomposites on cellulose crystallites content in the range from 0 to 30 wt.-% was investigated by scanning electron microscopy, differential scanning thermal analysis, dynamic mechanical thermal analysis, and measurements of mechanical properties and water absorption. The results indicate that the strong interactions between fillers and between the filler and PS matrix play a key role in reinforcing the resulting composites. The PS/cellulose crystallite composites, conditioned at 50% relative humidity, undergo an increase in both tensile strength and Young's modulus from 2.5 MPa for PS film to 7.8 MPa and from 36 MPa for PS film to 301 MPa. Further, incorporating cottonseed linter cellulose crystallites into PS matrix leads to an improvement in water resistance for the resulting biocomposites. The mechanical behaviors of the starch-based biocomposites as a function of cellulose crystallites content.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“For glycerol plasticized starch nanocomposite reinforced with cellulose crystallites prepared from cottonseed linter [141], an increase of Tg with filler content was reported and attributed to cellulose/starch interactions.”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [141]
Citations
Cites
Composites reinforced with cellulose based fibres
Bledzki, A. (1999) · Progress in Polymer Science · doi:10.1016/s0079-6700(98)00018-5 · Cited by 4,696
Mohanty, A. K., Misra, M., & Drzal, L. T. (2002) · Journal of Polymers and the Environment · doi:10.1023/a:1021013921916 · Cited by 2,151
Polymer nanocomposites reinforced by cellulose whiskers
Favier, V., Chanzy, H., & Cavaille, J. Y. (1995) · Macromolecules · doi:10.1021/ma00122a053 · Cited by 1,149
Review: Current international research into cellulosic fibres and composites
Eichhorn, S. J., Baillie, C. A., Zafeiropoulos, N., Mwaikambo, L. Y., Ansell, M. P., Dufresne, A., Entwistle, K. M., Herrera-Franco, P. J., Escamilla, G. C., Groom, L., et al. (2001) · Journal of Materials Science · doi:10.1023/a:1017512029696 · Cited by 943
Dong, X. M., Kimura, T., Revol, J.-F., & Gray, D. G. (1996) · Langmuir · doi:10.1021/la950133b · Cited by 766
Plasticized starch/tunicin whiskers nanocomposites. 1. Structural analysis
Anglès, M. N., & Dufresne, A. (2000) · Macromolecules · doi:10.1021/ma0008701 · Cited by 667
Biocomposites based on plasticized starch: thermal and mechanical behaviours
Averous, L., & Boquillon, N. (2004) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2003.11.015 · Cited by 629
Dufresne, A., Dupeyre, D., & Vignon, M. R. (2000) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(20000628)76:14<2080::aid-app12>3.0.co;2-u · Cited by 523
Thermoplastic starch–cellulosic fibers composites: preliminary results
Curvelo, A. (2001) · Carbohydrate Polymers · doi:10.1016/s0144-8617(00)00314-3 · Cited by 470
Plasticized Starch/Tunicin Whiskers Nanocomposite Materials. 2. Mechanical Behavior
Anglès, M. N., & Dufresne, A. (2001) · Macromolecules · doi:10.1021/ma001555h · Cited by 431
Influence of natural fibres on the mechanical properties of biodegradable polymers
Wollerdorfer, M., & Bader, H. (1998) · Industrial Crops and Products · doi:10.1016/s0926-6690(97)10015-2 · Cited by 429
Improvement of starch film performances using cellulose microfibrils
Dufresne, A., & Vignon, M. R. (1998) · Macromolecules · doi:10.1021/ma971532b · Cited by 409
Morphological investigation of nanocomposites from sorbitol plasticized starch and tunicin whiskers
Mathew, A. P., & Dufresne, A. (2002) · Biomacromolecules · doi:10.1021/bm0101769 · Cited by 384
Morphology and Properties of Soy Protein Isolate Thermoplastics Reinforced with Chitin Whiskers
Lu, Y., Weng, L., & Zhang, L. (2004) · Biomacromolecules · doi:10.1021/bm034516x · Cited by 356
Self-citationA first insight on composites of thermoplastic starch and kaolin
de Carvalho, A. J. F., Curvelo, A. A. S., & Agnelli, J. A. M. (2001) · Carbohydrate Polymers · doi:10.1016/s0144-8617(00)00315-5 · Cited by 265
Transcrystallization in Mcl-PHAs/Cellulose Whiskers Composites
Dufresne, A., Kellerhals, M. B., & Witholt, B. (1999) · Macromolecules · doi:10.1021/ma990564r · Cited by 236
The influence of starch molecular mass on the properties of extruded thermoplastic starch
van Soest, J. J. G., Benes, K., de Wit, D., & Vliegenthart, J. F. G. (1996) · Polymer · doi:10.1016/0032-3861(96)00165-6 · Cited by 217
Preparation and characterization of jute- and flax-reinforced starch-based composite foams
Soykeabkaew, N., Supaphol, P., & Rujiravanit, R. (2004) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2004.06.037 · Cited by 211
Ishikawa, A., Okano, T., & Sugiyama, J. (1997) · Polymer · doi:10.1016/s0032-3861(96)00516-2 · Cited by 197
Thermoplastic starch/natural rubber blends
Carvalho, A. J. F., Job, A. E., Alves, N., Curvelo, A. A. S., & Gandini, A. (2003) · Carbohydrate Polymers · doi:10.1016/s0144-8617(03)00005-5 · Cited by 179
Antiplasticisation and oxygen permeability of starch–sorbitol films
Gaudin, S., Lourdin, D., Forssell, P. M., & Colonna, P. (2000) · Carbohydrate Polymers · doi:10.1016/s0144-8617(99)00206-4 · Cited by 174
Processing and characterization of biodegradable products based on starch
Funke, U., Bergthaller, W., & Lindhauer, M. G. (1998) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(97)00163-8 · Cited by 174
Mechanical properties of silk fibroin–microcrystalline cellulose composite films
Noishiki, Y., Nishiyama, Y., Wada, M., Kuga, S., & Magoshi, J. (2002) · Journal of Applied Polymer Science · doi:10.1002/app.11370 · Cited by 173
Ebeling, T., Paillet, M., Borsali, R., Diat, O., Dufresne, A., Cavaillé, J.-Y., & Chanzy, H. (1999) · Langmuir · doi:10.1021/la990046+ · Cited by 164
Santayanon, R., & Wootthikanokkhan, J. (2002) · Carbohydrate Polymers · doi:10.1016/s0144-8617(02)00109-1 · Cited by 124
Synthesis and properties of composites of starch and chemically modified natural rubber
Rouilly, A., Rigal, L., & Gilbert, R. G. (2004) · Polymer · doi:10.1016/j.polymer.2004.09.043 · Cited by 97
Stein, R. S. (1976) · Journal of Colloid and Interface Science · doi:10.1016/0021-9797(76)90296-4 · Cited by 87
Blends of polymers with similar glass transition temperatures: A DMTA and DSC study
Bikiaris, D. Ν., Prinos, J., Botev, M., Betchev, C., & Panayiotou, C. G. (2004) · Journal of Applied Polymer Science · doi:10.1002/app.20531 · Cited by 84
Wood pulp reinforced thermoplastic starch composites
Carvalho, A. J. F., Curvelo, A. A. S., & Agnelli, J. A. M. (2002) · International Journal of Polymeric Materials · doi:10.1080/714975803 · Cited by 81
Chazeau, L., Paillet, M., & Cavaill�, J. Y. (1999) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/(sici)1099-0488(19990815)37:16<2151::aid-polb17>3.0.co;2-v · Cited by 79
Extrusion of pectin and glycerol with various combinations of orange albedo and starch
Fishman, M. L., Coffin, D. R., Onwulata, C. I., & Konstance, R. P. (2004) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2004.05.014 · Cited by 77
Synthesis and Characterization of Polymeric Linseed Oil Grafted Methyl Methacrylate or Styrene
Çakmaklı, B., Hazer, B., Tekin, İ. Ö., Kızgut, S., Koksal, M., & Menceloǵlu, Y. Z. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200300117 · Cited by 71
Schierholz, K., Lappan, U., Petr, A., Dunsch, L., & Lunkwitz, K. (1999) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/(sici)1099-0488(19990901)37:17<2430::aid-polb14>3.0.co;2-4 · Cited by 20
Mechanical behavior of sheets prepared from sugar beet cellulose microfibrils
Dufresne, A., Cavaill�, J.-Y., & Vignon, M. R. (1997) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19970509)64:6
Mohanty (2000) · doi:10.1002/(sici)1439-2054(20000301)276:1
Research works printed but not linked: 5
- Lu Y. S., 2005, Carbohydr. Polym.
- Battista O. A., 1975, Microcrystal Polymer Science
- 10.1021/la990046 · doi:10.1021/la990046
- Ljungberg N., 2005, Biomacromolecules
- Vergnaud J. M., 1991, Liquid Transport Process in Polymeric Materials: Modeling and Industrial Applications
Cited by
Cellulose nanocrystals: chemistry, self-assembly, and applications
Habibi, Y., Lucia, L. A., & Rojas, O. J. (2010) · Chemical Reviews · doi:10.1021/cr900339w · Cited by 5,980
Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications
Siqueira, G., Bras, J., & Dufresne, A. (2010) · Polymers · doi:10.3390/polym2040728 · Cited by 1,328
“For glycerol plasticized starch nanocomposite reinforced with cellulose crystallites prepared from cottonseed linter [141], an increase of Tg with filler content was reported and attributed to cellulose/starch interactions.”
MethodNanocomposites for food packaging applications
Azeredo, H. M. C. D. (2009) · Food Research International · doi:10.1016/j.foodres.2009.03.019 · Cited by 1,259
“The water uptake by starch films decreases linearly (Dufresne & Vignon, 1998; Dufresne et al., 2000) or almost linearly (Lu et al., 2005) with increasing cellulose whisker content.”
BackgroundProduction of nanocrystalline cellulose from lignocellulosic biomass: Technology and applications
Brinchi, L., Cotana, F., Fortunati, E., & Kenny, J. M. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.01.033 · Cited by 1,121
“Starch-based olymers can be reinforced by the addition of a percentage of NCC s filler, as observed for instance by Anglès and Dufresne (2000, 001), Cao, Chen, Chang, Stumborg, and Huneault (2008), Cao, Chen, hang, Muir, and Falk (2008) and other scientists (Kvien et al., 007; Lu et al., 2005).”
BackgroundCellulose nanocrystals and related nanocomposites: Review of some properties and challenges
Mariano, M., El Kissi, N., & Dufresne, A. (2014) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.23490 · Cited by 933
Metadata
- Authors
- Lu, Y., Weng, L., & Cao, X.
- Affiliations
- Iowa State University (US)
- State University of New York (US)
- Wuhan University (CN)
- Corresponding author
- Lu, Yongshang
- ORCID
- Cao, Xiaodong
- Venue
- Macromolecular Bioscience
- Publisher
- Wiley
- Published
- 2005-10-21
- Volume
- 5
- Issue
- 11
- Pages
- 1101-1107
- ISSN
- 1616-5187 (ISSN-L)
- 1616-5195
- OpenAlex
- W2157069443
- Cited by
- 200
- References
- 36
- Citations by year
- 2026: 2 · 2025: 5 · 2024: 5 · 2023: 5 · 2022: 10 · 2021: 10 · 2020: 14 · 2019: 15 · 2018: 12 · 2017: 19 · 2016: 13 · 2015: 11 · 2014: 13 · 2013: 9 · 2012: 11
- FWCI
- 2.38
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Macromolecular Bioscience (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Advanced Cellulose Research Studies
- Physical Sciences › Materials Science › Polymers and Plastics › Natural Fiber Reinforced Composites
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Keywords
- plasticized starch, glycerol plasticizer, cellulose crystallites, acid hydrolysis, filler-matrix interaction, tensile strength, Young's modulus, water absorption, water resistance, starch films, agricultural waste valorization
- MeSH terms
- Biodegradation, Environmental, Cellulose, Composite Resins, Cottonseed Oil, Crystallization, Plasticizers, Starch, Tensile Strength
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.