Biocomposites of Plasticized Starch Reinforced with Cellulose Crystallites from Cottonseed Linter
The DOI matches its Crossref record; 35 of the 36 references it cites were found in a registry or an index.
Abstract
Environmentally friendly starch biocomposites were successfully developed using a colloidal suspension of cottonseed linter cellulose crystallite as a filler to reinforce glycerol plasticized starch (PS). The cellulose crystallites, having lengths of 350 +/- 70 nm and diameters of 40 +/- 8 nm on average, were prepared from cottonseed linters by acid hydrolysis. The dependence of morphology and properties of the PS-based biocomposites on cellulose crystallites content in the range from 0 to 30 wt.-% was investigated by scanning electron microscopy, differential scanning thermal analysis, dynamic mechanical thermal analysis, and measurements of mechanical properties and water absorption. The results indicate that the strong interactions between fillers and between the filler and PS matrix play a key role in reinforcing the resulting composites. The PS/cellulose crystallite composites, conditioned at 50% relative humidity, undergo an increase in both tensile strength and Young's modulus from 2.5 MPa for PS film to 7.8 MPa and from 36 MPa for PS film to 301 MPa. Further, incorporating cottonseed linter cellulose crystallites into PS matrix leads to an improvement in water resistance for the resulting biocomposites. The mechanical behaviors of the starch-based biocomposites as a function of cellulose crystallites content.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“For glycerol plasticized starch nanocomposite reinforced with cellulose crystallites prepared from cottonseed linter [141], an increase of Tg with filler content was reported and attributed to cellulose/starch interactions.”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [141]
Citations
Cites
Composites reinforced with cellulose based fibres
Bledzki, A. (1999) · Progress in Polymer Science · doi:10.1016/s0079-6700(98)00018-5 · Cited by 4,696
Mohanty, A. K., Misra, M., & Drzal, L. T. (2002) · Journal of Polymers and the Environment · doi:10.1023/a:1021013921916 · Cited by 2,151
Polymer nanocomposites reinforced by cellulose whiskers
Favier, V., Chanzy, H., & Cavaille, J. Y. (1995) · Macromolecules · doi:10.1021/ma00122a053 · Cited by 1,149
Review: Current international research into cellulosic fibres and composites
Eichhorn, S. J., Baillie, C. A., Zafeiropoulos, N., Mwaikambo, L. Y., Ansell, M. P., Dufresne, A., Entwistle, K. M., Herrera-Franco, P. J., Escamilla, G. C., Groom, L., et al. (2001) · Journal of Materials Science · doi:10.1023/a:1017512029696 · Cited by 943
Dong, X. M., Kimura, T., Revol, J.-F., & Gray, D. G. (1996) · Langmuir · doi:10.1021/la950133b · Cited by 766
Plasticized starch/tunicin whiskers nanocomposites. 1. Structural analysis
Anglès, M. N., & Dufresne, A. (2000) · Macromolecules · doi:10.1021/ma0008701 · Cited by 667
Biocomposites based on plasticized starch: thermal and mechanical behaviours
Averous, L., & Boquillon, N. (2004) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2003.11.015 · Cited by 629
Dufresne, A., Dupeyre, D., & Vignon, M. R. (2000) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(20000628)76:14<2080::aid-app12>3.0.co;2-u · Cited by 523
Thermoplastic starch–cellulosic fibers composites: preliminary results
Curvelo, A. (2001) · Carbohydrate Polymers · doi:10.1016/s0144-8617(00)00314-3 · Cited by 470
Plasticized Starch/Tunicin Whiskers Nanocomposite Materials. 2. Mechanical Behavior
Anglès, M. N., & Dufresne, A. (2001) · Macromolecules · doi:10.1021/ma001555h · Cited by 431
Research works printed but not linked: 5
- Lu Y. S., 2005, Carbohydr. Polym.
- Battista O. A., 1975, Microcrystal Polymer Science
- 10.1021/la990046 · doi:10.1021/la990046
- Ljungberg N., 2005, Biomacromolecules
- Vergnaud J. M., 1991, Liquid Transport Process in Polymeric Materials: Modeling and Industrial Applications
Cited by
Cellulose nanocrystals: chemistry, self-assembly, and applications
Habibi, Y., Lucia, L. A., & Rojas, O. J. (2010) · Chemical Reviews · doi:10.1021/cr900339w · Cited by 5,980
Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications
Siqueira, G., Bras, J., & Dufresne, A. (2010) · Polymers · doi:10.3390/polym2040728 · Cited by 1,328
“For glycerol plasticized starch nanocomposite reinforced with cellulose crystallites prepared from cottonseed linter [141], an increase of Tg with filler content was reported and attributed to cellulose/starch interactions.”
MethodNanocomposites for food packaging applications
Azeredo, H. M. C. D. (2009) · Food Research International · doi:10.1016/j.foodres.2009.03.019 · Cited by 1,259
“The water uptake by starch films decreases linearly (Dufresne & Vignon, 1998; Dufresne et al., 2000) or almost linearly (Lu et al., 2005) with increasing cellulose whisker content.”
BackgroundProduction of nanocrystalline cellulose from lignocellulosic biomass: Technology and applications
Brinchi, L., Cotana, F., Fortunati, E., & Kenny, J. M. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.01.033 · Cited by 1,121
“Starch-based olymers can be reinforced by the addition of a percentage of NCC s filler, as observed for instance by Anglès and Dufresne (2000, 001), Cao, Chen, Chang, Stumborg, and Huneault (2008), Cao, Chen, hang, Muir, and Falk (2008) and other scientists (Kvien et al., 007; Lu et al., 2005).”
BackgroundCellulose nanocrystals and related nanocomposites: Review of some properties and challenges
Mariano, M., El Kissi, N., & Dufresne, A. (2014) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.23490 · Cited by 933
Cellulose-Based Bio- and Nanocomposites: A Review
Kalia, S., Dufresne, A., Cherian, B. M., Kaith, B. S., Avérous, L., Njuguna, J., & Nassiopoulos, E. (2011) · International Journal of Polymer Science · doi:10.1155/2011/837875 · Cited by 896
“Strong interactions between cellulose nanofibers prepared from cottonseed linters and between the filler and the glycerol-plasticized starch matrix were reported to play a key role in reinforcing properties [120].”
BackgroundCellulose nanowhiskers: promising materials for advanced applications
Eichhorn, S. J. (2011) · Soft Matter · doi:10.1039/c0sm00142b · Cited by 782
Siqueira, G., Bras, J., & Dufresne, A. (2009) · Biomacromolecules · doi:10.1021/bm801193d · Cited by 791
Kargarzadeh, H., Huang, J., Lin, N., Ahmad, I., Mariano, M., Dufresne, A., Thomas, S., & Gałęski, A. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.07.008 · Cited by 496
Ghanbarzadeh, B., Almasi, H., & Entezami, A. A. (2011) · Industrial Crops and Products · doi:10.1016/j.indcrop.2010.10.016 · Cited by 483
Ilyas, R. A., Sapuan, S. M., Ishak, M. R., & Zainudin, E. S. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.09.002 · Cited by 448
Plant-derived nanostructures: types and applications
Mohammadinejad, R., Karimi, S., Iravani, S., & Varma, R. S. (2016) · Green Chemistry · doi:10.1039/c5gc01403d · Cited by 437
Zeng, J.-B., He, Y.-S., Li, S.-L., & Wang, Y.-Z. (2012) · Biomacromolecules · doi:10.1021/bm201564a · Cited by 423
Nanocomposite Edible Films from Mango Puree Reinforced with Cellulose Nanofibers
Azeredo, H. M. C., Mattoso, L. H. C., Wood, D., Williams, T. G., Avena‐Bustillos, R. J., & McHugh, T. H. (2009) · Journal of Food Science · doi:10.1111/j.1750-3841.2009.01186.x · Cited by 405
Ma, X., Jian, R., Chang, P. R., & Yu, J. (2008) · Biomacromolecules · doi:10.1021/bm800987c · Cited by 364
Thermoplastic Starch Processing and Characteristics—A Review
Zhang, Y., Rempel, C., & Liu, Q. (2014) · Critical Reviews in Food Science and Nutrition · doi:10.1080/10408398.2011.636156 · Cited by 348
“TPS/fiber composite has shown a great improvement in mechanical properties, gas barrier, water resistance, and thermal stability (Lu et al., 2005; Ma et al., 2005a; Panthapulakkal et al., 2006).”
BackgroundImproving the performance of edible food packaging films by using nanocellulose as an additive
Zhang, W., Zhang, Y., Cao, J., & Jiang, W. (2021) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.10.185 · Cited by 330
Wan, Y. Z., Luo, H., He, F., Liang, H., Huang, Y., & Li, X. L. (2009) · Composites Science and Technology · doi:10.1016/j.compscitech.2009.02.024 · Cited by 329
Polysaccharide nano crystal reinforced nanocomposites
Dufresne, A. (2008) · Canadian Journal of Chemistry · doi:10.1139/v07-152 · Cited by 308
Lu, Y., Weng, L., & Cao, X. (2006) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2005.08.027 · Cited by 312
Self-citationStructure and properties of the nanocomposite films of chitosan reinforced with cellulose whiskers
Li, Q., Zhou, J., & Zhang, L. (2009) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.21711 · Cited by 311
Ma, X., Chang, P. R., & Yu, J. (2008) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2007.09.002 · Cited by 305
Oun, A. A., & Rhim, J.-W. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.03.073 · Cited by 294
Development, processing and applications of bio-sourced cellulose nanocrystal composites
Calvino, C., Macke, N., Kato, R., & Rowan, S. J. (2020) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2020.101221 · Cited by 245
Polyelectrolyte films based on chitosan/olive oil and reinforced with cellulose nanocrystals
Pereda, M., Dufresne, A., Aranguren, M. I., & Marcovich, N. E. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.10.046 · Cited by 226
Effects of Cellulose Whiskers on Properties of Soy Protein Thermoplastics
Wang, Y., Cao, X., & Zhang, L. (2006) · Macromolecular Bioscience · doi:10.1002/mabi.200600034 · Cited by 229
Self-citationPelissari, F. M., Andrade-Mahecha, M. M., Sobral, P. J. D. A., & Menegalli, F. C. (2017) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2017.05.106 · Cited by 218
Structure and properties of nanocomposite films based on sodium caseinate and nanocellulose fibers
Pereda, M., Amica, G., Rácz, I., & Marcovich, N. E. (2011) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2010.10.001 · Cited by 199
New biocomposites based on thermoplastic starch and bacterial cellulose
Martins, I. M. G., Magina, S. P., Oliveira, L., Freire, C. S. R., Silvestre, A. J. D., Neto, C. P., & Gandini, A. (2009) · Composites Science and Technology · doi:10.1016/j.compscitech.2009.05.012 · Cited by 192
Development and characterization of agar-based edible films reinforced with nano-bacterial cellulose
Wang, X., Guo, C., Hao, W., Ullah, N., Chen, L., Li, Z., & Feng, X. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.06.089 · Cited by 180
Ilyas, R. A., Sapuan, S. M., Atiqah, A., Ibrahim, R., Abral, H., Ishak, M. R., Zainudin, E. S., Nurazzi, N. M., Atikah, M. S. N., Ansari, M. N. M., et al. (2020) · Polymer Composites · doi:10.1002/pc.25379 · Cited by 172
Polylactide cellulose-based nanocomposites
Vatansever, E., Arslan, D., & Nofar, M. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.06.205 · Cited by 173
Bhat, A. H., Khan, I., Usmani, M. A., Umapathi, R., & Al-Kindy, S. M. Z. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.12.190 · Cited by 169
Nasri-Nasrabadi, B., Mehrasa, M., Rafienia, M., Bonakdar, S., Behzad, T., & Gavanji, S. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.02.075 · Cited by 168
Peresin, M. S., Habibi, Y., Vesterinen, A.-H., Rojas, O. J., Pawlak, J. J., & Seppälä, J. V. (2010) · Biomacromolecules · doi:10.1021/bm1006689 · Cited by 160
Study of cellulose nanocrystal doped starch-polyvinyl alcohol bionanocomposite films
Noshirvani, N., Hong, W., Ghanbarzadeh, B., Fasihi, H., & Montazami, R. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.10.083 · Cited by 161
“As reported by Cao et al., [24], the water absorption of the films is inhibited in the presence of CNC and PVA within the PS matrix.”
ResultInfluentialPreparation and characterization of nanocomposite films containing starch and cellulose nanofibers
Li, M., Tian, X. N., Jin, R., & Li, D. (2018) · Industrial Crops and Products · doi:10.1016/j.indcrop.2018.07.043 · Cited by 163
Tibolla, H., Pelissari, F. M., Martins, J. T., Lanzoni, E. M., Vicente, A. A., Menegalli, F. C., & Cunha, R. L. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.11.079 · Cited by 141
Syafiq, R. M. O., Sapuan, S. M., & Zuhri, M. R. M. (2020) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2020.12.091 · Cited by 140
Characterization of starch based nanocomposites
Kvien, I., Sugiyama, J., Votrubec, M., & Oksman, K. (2007) · Journal of Materials Science · doi:10.1007/s10853-007-1699-2 · Cited by 139
Dispersion of cellulose crystallites by nonionic surfactants in a hydrophobic polymer matrix
Kim, J., Montero, G. A., Habibi, Y., Hinestroza, J. P., Genzer, J., Argyropoulos, D. S., & Rojas, O. J. (2009) · Polymer Engineering and Science · doi:10.1002/pen.21417 · Cited by 141
Azammi, A. M. N., Ilyas, R. A., Sapuan, S. M., Ibrahim, R., Atikah, M. S. N., Asrofi, M., & Atiqah, A. (2020) · Elsevier eBooks · doi:10.1016/b978-0-08-102665-6.00003-0 · Cited by 147
Preparation and characterization of cellulose/curcumin composite films
Luo, N., Varaprasad, K., Gangireddygari, V. S. R., Rajulu, A. V., & Zhang, J. P. (2012) · RSC Advances · doi:10.1039/c2ra21465b · Cited by 122
Polysaccharide nanomaterial reinforced starch nanocomposites: A review
Dufresne, A., & Castaño, J. (2016) · Starch - Stärke · doi:10.1002/star.201500307 · Cited by 127
Syafri, E., Jamaluddin, J., Sari, N. H., Mahardika, M., Amanda, P., & Ilyas, R. A. (2021) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2021.12.111 · Cited by 119
Oun, A. A., & Rhim, J. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.07.053 · Cited by 120
Films based on oxidized starch and cellulose from barley
Halal, S. L. M. E., Colussi, R., Deon, V. G., Pinto, V. Z., Villanova, F. A., Carreño, N. L. V., Dias, Á. R. G., & Zavareze, E. D. R. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.07.024 · Cited by 118
Meneguin, A. B., Cury, B. S. F., dos Santos, A. M., Franco, D. F., Barud, H. D. S., & Silva-Filho, E. C. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.10.062 · Cited by 120
Sucaldito, M. R., & Camacho, D. H. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.04.031 · Cited by 116
Cellulosic materials as natural fillers in starch-containing matrix-based films: a review
Gutiérrez, T. J., & Álvarez, V. A. (2016) · Polymer Bulletin · doi:10.1007/s00289-016-1814-0 · Cited by 114
“Likewise, strong interactions between cellulose nanofibers (CNFs) prepared from cottonseed linters and between the filler and the glycerol-plasticized starch matrix were reported to play a key role in reinforcing properties [89].”
BackgroundKhan, M., Srivastava, S. K., & Gupta, M. K. (2020) · Polymer Testing · doi:10.1016/j.polymertesting.2020.106721 · Cited by 122
Arruda, T. R., Machado, G. D. O., Marques, C. S., de Souza, A. L., Pelissari, F. M., de Oliveira, T. V., & Silva, R. R. A. (2025) · Macromol—A Journal of Macromolecular Research · doi:10.3390/macromol5020019 · Cited by 122
Das, K., Ray, D., Bandyopadhyay, N. R., Ghosh, T., Mohanty, A. K., & Misra, M. (2009) · Cellulose · doi:10.1007/s10570-009-9280-6 · Cited by 105
“Although acid hydrolysis has been practiced for many years by many researchers, but in most of the works, the concentration of sulfuric acid is kept in the range 63‐ 72 wt% (Chakraborty et al. 2005; Choi and Simonsen 2006; Lu et al. 2005; Habibi and Dufresne 2008; Cao et al. 2008).”
BackgroundMethodOthman, S. H., MAJID, N. A., Tawakkal, I. S. M. A., Basha, R. K., Nordin, N., & Shapi’i, R. A. (2019) · Food Science and Technology · doi:10.1590/fst.36017 · Cited by 102
“Microcrystalline cellulose (MCC) has been used as ecofriendly filler and reinforcement for biopolymers (Lu et al., 2005).”
MethodPonnusamy, P. G., & Mani, S. (2022) · Polymers · doi:10.3390/polym14194033 · Cited by 107
Mechanochemical Transformations of Biomass into Functional Materials
Hajiali, F., Jin, T., Yang, G., Santos, M., Lam, E., & Moores, A. (2022) · ChemSusChem · doi:10.1002/cssc.202102535 · Cited by 99
Dutta, D., & Sit, N. (2024) · Sustainable Chemistry and Pharmacy · doi:10.1016/j.scp.2024.101534 · Cited by 95
Ma, X., Cheng, Y., Qin, X., Guo, T., Deng, J., & Liu, X. (2017) · LWT · doi:10.1016/j.lwt.2017.08.012 · Cited by 94
Das, K., Ray, D., Bandyopadhyay, N. R., Sahoo, S., Mohanty, A. K., & Misra, M. (2010) · Composites Part B Engineering · doi:10.1016/j.compositesb.2010.12.017 · Cited by 96
A review of cellulose nanocrystals and nanocomposites
Ramires, E. C., & Dufresne, A. (2011) · TAPPI Journal · doi:10.32964/tj10.4.9 · Cited by 96
Bangar, S. P., Whiteside, W. S., Özoğul, F., Dunno, K. D., Cavender, G. A., & Dawson, P. (2022) · Food Bioscience · doi:10.1016/j.fbio.2022.101621 · Cited by 91
Zhao, Y., Cheung, H., Lau, K.-T., Xu, C.-L., Zhao, D., & Li, H. (2010) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2010.07.015 · Cited by 92
Preparation and properties of plasticized starch/multiwalled carbon nanotubes composites
Cao, X., Chen, Y., Chang, P. R., & Huneault, M. A. (2007) · Journal of Applied Polymer Science · doi:10.1002/app.26799 · Cited by 86
Self-citationPreparation and characterization of cellulose nanofiber reinforced thermoplastic starch composites
Nasri‐Nasrabadi, B., Behzad, T., & Bagheri, R. (2014) · Fibers and Polymers · doi:10.1007/s12221-014-0347-0 · Cited by 84
dos Santos, F. A., Iulianelli, G. C. V., & Tavares, M. I. B. (2016) · Materials Sciences and Applications · doi:10.4236/msa.2016.75026 · Cited by 113
“Lu, Weng, and Cao [272] found near linear results for the decrease in water absorption with increasing concentration of cellulose whiskers in polymer nanocomposites.”
BackgroundVaezi, K., Asadpour, G., & Sharifi, S. H. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.01.007 · Cited by 80
Nanocellulose-Based Composites
Spence, K. L., Habibi, Y., & Dufresne, A. (2011) · Springer eBooks · doi:10.1007/978-3-642-17370-7_7 · Cited by 86
Fabrication of starch - Nanocellulose composite fibers by electrospinning
Wang, H., Kong, L., & Ziegler, G. R. (2018) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2018.11.047 · Cited by 76
Vallejos, M. E., Curvelo, A. A. S., Teixeira, E. M., Mendes, F. M., Carvalho, A. J. F., Felissia, F. E., & Área, M. C. (2011) · Industrial Crops and Products · doi:10.1016/j.indcrop.2011.01.014 · Cited by 79
Wu, Y., Qi, Q., Liang, G., & Zhang, L. (2006) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2005.12.031 · Cited by 72
Zhang, L., Zhao, J., Zhang, Y., Li, F., Jiao, X., & Li, Q. (2021) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2021.09.187 · Cited by 70
Coelho, C. C. D. S., Cerqueira, M. Â., Pereira, R. N., Pastrana, L. M., Freitas‐Silva, O., Vicente, A. A., Cabral, L. M. C., & Teixeira, J. A. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.07.007 · Cited by 70
Creep behavior of starch-based nanocomposite films with cellulose nanofibrils
Li, M., Li, D., Wang, L.-J., & Adhikari, B. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.10.023 · Cited by 69
da Silveira, P. H. P. M., dos Santos, M. C. C., Chaves, Y. S., Ribeiro, M. P., Marchi, B. Z., Monteiro, S. N., Gomes, A. V., Tapanes, N. D. L. C. O., Pereira, P. S. D. C., & Bastos, D. C. (2023) · Polymers · doi:10.3390/polym15153271 · Cited by 71
“The second factor is the orientation of the fibers [70].”
BackgroundNanocellulose/Starch Biopolymer Nanocomposites: Processing, Manufacturing, and Applications
Ilyas, R. A., Sapuan, S. M., Norrrahim, M. N. F., Yasim‐Anuar, T. A. T., Kadier, A., Kalil, M. S., Atikah, M. S. N., Ibrahim, R., Asrofi, M., Abral, H., et al. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-819661-8.00006-8 · Cited by 73
Ahmad, K., Din, Z., Ullah, H., Ouyang, Q., Rani, S., Jan, I., Alam, M., Rahman, Z., Kamal, T., Ali, S., et al. (2022) · Starch - Stärke · doi:10.1002/star.202100283 · Cited by 70
Conversion of low-quality cotton to bioplastics
Rumi, S. S., Liyanage, S., & Abidi, N. (2021) · Cellulose · doi:10.1007/s10570-020-03661-1 · Cited by 65
“Several studies have reported on the effective conversion of low molecular weight cellulose, such as cotton linter pulp (Zhang et al. 2005; Lu et al. 2005; Wang et al. 2013), microcrystalline cellulose (MCC) (Acharya et al. 2017), wood pulp (Wang et al. 2013), and cellulose nanocrystals (CNCs) (Ma…”
BackgroundProperties and Characterization of PLA, PHA, and Other Types of Biopolymer Composites
Ilyas, R. A., Sapuan, S. M., Kadier, A., Kalil, M. S., Ibrahim, R., Atikah, M. S. N., Nurazzi, N. M., Nazrin, A., Lee, C. H., Norrrahim, M. N. F., et al. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-819661-8.00008-1 · Cited by 82
Cao, X., Chang, P. R., & Huneault, M. A. (2007) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2007.05.023 · Cited by 67
“The WPU dispersion was prepared using PCL diol with some modifications from previous method (Lu et al., 2005a, Lu, Tighzert, Dole, & Erre, 2005b) as following.”
MethodSelf-citationProduction, Processes and Modification of Nanocrystalline Cellulose from Agro-Waste: A Review
Ilyas, R. A., Sapuan, S. M., Ibrahim, R., Atikah, M. S. N., Atiqah, A., Ansari, M. N. M., & Norrrahim, M. N. F. (2020) · IntechOpen eBooks · doi:10.5772/intechopen.87001 · Cited by 66
The use of biobased nanofibres in composites
Bandyopadhyay‐Ghosh, S., Ghosh, S. B., & Sain, M. M. (2014) · Elsevier eBooks · doi:10.1533/9781782421276.5.571 · Cited by 76
Development of bioactive edible film from turmeric dye solvent extraction residue
Maniglia, B. C., Domingos, J. R., de Paula, R. L., & Tapia‐Blácido, D. R. (2013) · LWT · doi:10.1016/j.lwt.2013.12.011 · Cited by 66
Karimi, S., Dufresne, A., Tahir, P. M., Karimi, A., & Abdulkhani, A. (2014) · Journal of Materials Science · doi:10.1007/s10853-014-8151-1 · Cited by 59
“For instance, nanocellulose isolated from bagasse [5], Cottonseed Linter [6], flax [7], hemp [8], wheat straw [9], and ramie [10] have been used to reinforce TPS matrix and great improvements in mechanical performance and water sensitivity have been reported.”
MethodThe role of nanocellulose fibers, starch and chitosan on multipolysaccharide based films
Tomé, L. C., Fernandes, S. C. M., Perez, D. D. S., Sadocco, P., Silvestre, A. J. D., Neto, C. P., Marrucho, I. M., & Freire, C. S. R. (2013) · Cellulose · doi:10.1007/s10570-013-9959-6 · Cited by 59
“…biocomposites, namely vegetable fibers (Curvelo et al. 2001; Alvarez et al. 2005; Ma et al. 2005), microfibrillated cellulose (Dufresne et al. 2000; Lu et al. 2005), cellulose nanocrystallites (Lu et al. 2006), microcrystalline cellulose (Ma et al. 2008), hemp nanocrystals (Cao et al. 2008),…”
BackgroundWilpiszewska, K., & Czech, Z. (2014) · Starch - Stärke · doi:10.1002/star.201300093 · Cited by 56
Heidarian, P., Behzad, T., & Sadeghi, M. (2017) · Cellulose · doi:10.1007/s10570-017-1336-4 · Cited by 56
“In this regard, starch, a low-cost biopolymer, has recently been considered as a suitable substitute for most petroleum-based polymers in film packaging applications (Lu et al. 2005).”
BackgroundLiu, J., Chen, P., Qin, D., Jia, S., Jia, C., Li, L., Bian, H., Wei, J., & Shao, Z. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.115818 · Cited by 55
Zhao, Y., Huerta, R. R., & Saldaña, M. D. A. (2019) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2019.02.022 · Cited by 54
Effect of Filler Properties on the Antioxidant Response of Thermoplastic Starch Composites
Gutiérrez, T. J., Seligra, P. G., Medina‐Jaramillo, C., Famá, L., & Goyanes, S. (2017) · Wiley eBooks · doi:10.1002/9781119441632.ch14 · Cited by 53
Freitas, P. A. V., Arias, C. I. L. F., Torres‐Giner, S., González‐Martínez, C., & Chiralt, A. (2021) · Applied Sciences · doi:10.3390/app11188433 · Cited by 53
“As shown in FESEM micrographs, CMFs were strongly bonded to the polymer matrix, which restricted the movement of starch chains, decreasing their stretchability but also reinforcing the TPS matrix [70].”
BackgroundPérez‐Pacheco, E., Canto-Pinto, J. C., Moo‐Huchin, V. M., Estrada-Mota, I. A., Estrada‐León, R. J., & Chel‐Guerrero, L. (2016) · InTech eBooks · doi:10.5772/65397 · Cited by 52
“Table 3 shows research works on the use of starch from different botanical sources, such as cassava [4, 49], barley grain [72], potato [73, 74], corn [75, 76], chayote [48], tamarind seeds [77], and wheat [78], to obtain TPS films reinforced with CNF.”
Cellulosic Nanocomposites from Natural Fibers for Medical Applications: A Review
Khalil, H. P. S. A., Bhat, A. H., Bakar, A. A., Tahir, P. M., Zaidul, I. S. M., & Jawaid, M. (2014) · Springer eBooks · doi:10.1007/978-3-642-45232-1_72 · Cited by 53
“and between the filler and the glycerol-plasticized starch matrix were reported to play a key role in reinforcing properties [116].”
BackgroundRaabe, J., Fonseca, A. D. S., Bufalino, L., Ribeiro, C., Martins, M. A., Marconcini, J. M., Mendes, L. M., & Tonoli, G. H. D. (2015) · Journal of Nanomaterials · doi:10.1155/2015/493439 · Cited by 52
Thermoplastic starch/talc bionanocomposites. Influence of particle morphology on final properties
Castillo, L. A., López, O. V., Ghilardi, J., Villar, M. A., Barbosa, S. E., & García, M. A. (2015) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2015.05.030 · Cited by 44
Halal, S. L. M. E., Colussi, R., Biduski, B., do Evangelho, J. A., Bruni, G. P., Antunes, M. D., Dias, Á. R. G., & Zavareze, E. D. R. (2016) · Journal of the Science of Food and Agriculture · doi:10.1002/jsfa.7773 · Cited by 39
López, O. V., Versino, F., Villar, M. A., & García, M. Á. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.07.081 · Cited by 43
Machado, B. A. S., Nunes, I. L., Pereira, F. V., & Druzian, J. I. (2012) · Ciência Rural · doi:10.1590/s0103-84782012001100028 · Cited by 51
Ghanbarzadeh, B., Almasi, H., & Oleyaei, S. A. (2013) · International Journal of Food Engineering · doi:10.1515/ijfe-2012-0197 · Cited by 36
“When another biopolymer is mixed with starch, the mechanical properties of the resulted polymer blend are obviously improved, because the chemical similarities of starch and other biopolymers provide a good interaction [11, 12].”
BackgroundProcessing of Polymer Nanocomposites Reinforced with Cellulose Nanocrystals: A Challenge
Dufresne, A. (2012) · International Polymer Processing · doi:10.3139/217.2603 · Cited by 36
Wittaya, T. (2009) · Cited by 52
Metadata
- Authors
- Lu, Y., Weng, L., & Cao, X.
- Affiliations
- Iowa State University (US)
- State University of New York (US)
- Wuhan University (CN)
- Corresponding author
- Lu, Yongshang
- ORCID
- Cao, Xiaodong
- Venue
- Macromolecular Bioscience
- Publisher
- Wiley
- Published
- 2005-10-21
- Volume
- 5
- Issue
- 11
- Pages
- 1101-1107
- ISSN
- 1616-5187 (ISSN-L)
- 1616-5195
- OpenAlex
- W2157069443
- Cited by
- 200
- References
- 36
- Citations by year
- 2026: 2 · 2025: 5 · 2024: 5 · 2023: 5 · 2022: 10 · 2021: 10 · 2020: 14 · 2019: 15 · 2018: 12 · 2017: 19 · 2016: 13 · 2015: 11 · 2014: 13 · 2013: 9 · 2012: 11
- FWCI
- 2.38
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Macromolecular Bioscience (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Advanced Cellulose Research Studies
- Physical Sciences › Materials Science › Polymers and Plastics › Natural Fiber Reinforced Composites
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Keywords
- plasticized starch, glycerol plasticizer, cellulose crystallites, acid hydrolysis, filler-matrix interaction, tensile strength, Young's modulus, water absorption, water resistance, starch films, agricultural waste valorization
- MeSH terms
- Biodegradation, Environmental, Cellulose, Composite Resins, Cottonseed Oil, Crystallization, Plasticizers, Starch, Tensile Strength
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.