The DOI matches its Crossref record; 48 of the 48 references it cites were found in a registry or an index.
Poly(ε‐caprolactone) Biomaterial Sterilized by E‐Beam Irradiation
Abstract
Summary: The effects of ionizing radiation (electron beam) on poly(ε‐caprolactone) (PCL) were studied by analyzing changes in viscosity‐average and weight‐average molecular weight and radius of gyration, and by performing sol‐gel analysis and swelling tests. Samples were irradiated under various conditions: solid and molten PCL in the presence or absence of air. The overall efficiency of crosslinking is higher for samples irradiated in the molten state than in the solid state, and is reduced in the presence of oxygen. Based on three kinds of experiments (molecular weight dependence on the dose in the pre‐gelation region, sol‐gel analysis, and swelling study), radiation‐chemical yields of intermolecular crosslinking and scission were determined and are discussed in terms of the mechanism of radiation‐induced reactions in PCL. Properties of the gels formed by high‐dose irradiation and mechanical properties of irradiated PCL were analyzed. Irradiation causes an increase in the compression modulus of PCL. This process occurs at the pre‐gelation stage and continues in the gel‐containing system. We have demonstrated, for the first time, that irradiation of solid PCL is accompanied by a pronounced post‐effect, which manifests itself by changes in the average molecular weight. EPR data indicate that this effect, at least in part, is caused by the presence of long‐lived radicals trapped in the crystalline regions. Irradiation with the sterilizing dose does not cause a statistically significant change in the biocompatibility of PCL after subsequent storage for 79 d, as determined by preliminary osteoblast vitality tests. Changes in the molecular weight upon irradiation and subsequent storage of poly(ε‐caprolactone). imageChanges in the molecular weight upon irradiation and subsequent storage of poly(ε‐caprolactone).
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“For PCL, Filipczak et al. demonstrated by e-beam irradiation (9.0 kGy/min) that the molecular weight distribution becomes broadened through combined chain scission and cross-linking [56].”
From Shape-memory polymers as a technology platform for biomedical applications (2010) · cites this paper as [56]
Citations
Cites
Principles of Polymer Chemistry.
Huggins, M. L. (1954) · Journal of the American Chemical Society · doi:10.1021/ja01639a090 · Cited by 16,550
Principles of polymer chemistry
(1995) · Choice Reviews Online · doi:10.5860/choice.33-2140 · Cited by 15,218
Scaffolds in tissue engineering bone and cartilage
Hutmacher, D. W. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00121-6 · Cited by 4,994
Statistical Mechanics of Cross-Linked Polymer Networks II. Swelling
Flory, P. J., & Rehner, J. (1943) · The Journal of Chemical Physics · doi:10.1063/1.1723792 · Cited by 3,865
Scudiero, D. A., Shoemaker, R. H., Paull, K. D., Monks, A. P., Tierney, S., Nofziger, T. H., Currens, M. J., Seniff, D. A., & Boyd, M. R. (1988) · PubMed · Cited by 2,342
Theory of Molecular Size Distribution and Gel Formation in Branched-Chain Polymers
Stockmayer, W. H. (1943) · The Journal of Chemical Physics · doi:10.1063/1.1723803 · Cited by 1,895
Fused deposition modeling of novel scaffold architectures for tissue engineering applications
Zein, I., Hutmacher, D. W., Tan, K. C., & Teoh, S. H. (2002) · Biomaterials · doi:10.1016/s0142-9612(01)00232-0 · Cited by 1,874
Molecular Size Distribution in Three Dimensional Polymers. I. Gelation 1
Flory, P. J. (1941) · Journal of the American Chemical Society · doi:10.1021/ja01856a061 · Cited by 1,873
FTIR study of polycaprolactone chain organization at interfaces
Elzein, T., Nasser-Eddine, M., Delaite, C., Bistac, S., & Dumas, P. (2004) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2004.02.001 · Cited by 814
Hyperbranched polymers 10 years after
Kim, Y. H. (1998) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/(sici)1099-0518(199808)36:11<1685::aid-pola1>3.0.co;2-r · Cited by 737
Polymer Degradation: Principles and Practical Applications
Schnabel, W. (1981) · De Gruyter eBooks · doi:10.1515/9783112784037 · Cited by 601
Polymers and polyfunctionality
Carothers, W. H. (1936) · Transactions of the Faraday Society · doi:10.1039/tf9363200039 · Cited by 533
Polymer degradation : principles and practical applications
Schnabel, W. (1981) · Medical Entomology and Zoology · Cited by 458
Khang, G., Bang Lee, H., & Ho Lee, J. (2002) · Biomaterials · doi:10.1201/9781420040036.ch3 · Cited by 407
Precipitation casting of polycaprolactone for applications in tissue engineering and drug delivery
Coombes, A. G. A., Rizzi, S. C., Williamson, M., Barralet, J. E., Downes, S., & Wallace, W. A. (2004) · Biomaterials · doi:10.1016/s0142-9612(03)00535-0 · Cited by 343
Ciapetti, G., Ambrosio, L., Savarino, L., Granchi, D., Cenni, E., Baldini, N., Pagani, S., Guizzardi, S., Causa, F., & Giunti, A. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00263-1 · Cited by 230
CHARLESBY, A. (1960) · Atomic Radiation and Polymers · doi:10.1016/b978-1-4831-9776-0.50014-0 · Cited by 221
Introduction to physical polymer science
Brooks, B. W. (1988) · The Chemical Engineering Journal · doi:10.1016/0300-9467(88)80057-1 · Cited by 216
Shape‐memory effects of radiation crosslinked poly(ϵ‐caprolactone)
Zhu, G., Liang, G., Xu, Q., & Yu, Q. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.12736 · Cited by 128
Gravity spinning of polycaprolactone fibres for applications in tissue engineering
Williamson, M. R., & Coombes, A. G. A. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00536-2 · Cited by 113
Classical light scattering from polymer solutions
Kunjappu, J. (1988) · Colloids and Surfaces · doi:10.1016/0166-6622(88)80098-2 · Cited by 99
Hutmacher, D. W., Ng, K. W., Kaps, C., Sittinger, M., & Kläring, S. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00350-8 · Cited by 89
Dias, A. M. A., Bonifácio, R. P., Marrucho, I. M., Pádua, A. A. H., & Gomes, M. C. (2002) · Physical Chemistry Chemical Physics · doi:10.1039/b207512c · Cited by 88
Corden, T. J., Jones, I. A., Rudd, C. D., Christian, P. W. N., Downes, S., & McDougall, K. E. (2000) · Biomaterials · doi:10.1016/s0142-9612(99)00236-7 · Cited by 86
Irradiation effects on polycaprolactone
Narkis, M., Sibony-Chaouat, S., Siegmann, A., Shkolnik, S., & Bell, J. P. (1985) · Polymer · doi:10.1016/0032-3861(85)90056-4 · Cited by 86
Marletta, G., Ciapetti, G., Satriano, C., Pagani, S., & Baldini, N. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.11.047 · Cited by 73
Chen, B., & Sun, K. (2004) · Polymer Testing · doi:10.1016/j.polymertesting.2004.07.010 · Cited by 68
Enzymatic degradation of radiation crosslinked poly(ε–caprolactone)
Darwis, D., Mitomo, H., Enjoji, T., Yoshii, F., & Makuuchi, K. (1998) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(98)00005-6 · Cited by 68
Crosslinking of poly(ε-caprolactone) by radiation technique and its biodegradability
Yoshii, F., Darwis, D., Mitomo, H., & Makuuchi, K. (2000) · Radiation Physics and Chemistry · doi:10.1016/s0969-806x(99)00449-1 · Cited by 67
Influence of physicochemical and structural characteristics of chitosan flakes on molybdate sorption
Milot, C., McBrien, J., Allen, S. J., & Guibal, E. (1998) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19980425)68:4<581::aid-app9>3.0.co;2-i · Cited by 67
Gel/sol analysis of irradiated polymers
Rosiak, J. M. (1998) · Radiation Physics and Chemistry · doi:10.1016/s0969-806x(97)00254-5 · Cited by 66
Self-citationInfluence of sterilization processes on poly(ε-caprolactone) nanospheres
Masson, V., Maurin, F., Fessi, H., & Devissaguet, J. P. (1997) · Biomaterials · doi:10.1016/s0142-9612(96)00144-5 · Cited by 65
Chemistry of Radiation Degradation of Polymers
O’Donnell, J. H. (1991) · ACS symposium series · doi:10.1021/bk-1991-0475.ch024 · Cited by 61
Degradability of radiation crosslinked PCL in the supercooled state under various environments
Darwis, D., Mitomo, H., & Yoshii, F. (1999) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(99)00017-8 · Cited by 44
Cavh: Principles and Practical Applications
McAlpine, L. (1998) · Critical Care Nursing Clinics of North America · doi:10.1016/s0899-5885(18)30212-0 · Cited by 43
Radiation crosslinking and scission parameters for poly(vinyl methyl ether) in aqueous solution
Janik, I., Kasprzak, E., AL-Zier, A., & Rosiak, J. M. (2003) · Nuclear Instruments and Methods in Physics Research Section B Beam Interactions with Materials and Atoms · doi:10.1016/s0168-583x(03)00897-8 · Cited by 41
Self-citationArchitectural Effects of Poly(ε-caprolactone)s on the Crystallization Kinetics
Choi, J., & Kwak, S. (2004) · Macromolecules · doi:10.1021/ma035387f · Cited by 35
Effect of Ionizing Radiation on a Series of Saturated Polyesters
D'ALELIO, G. F., Häberli, R., & Pezdirtz, G. F. (1968) · Journal of Macromolecular Science Part A - Chemistry · doi:10.1080/10601326808051427 · Cited by 31
Ohrlander, M. (2000) · Polymer · doi:10.1016/s0032-3861(99)00299-2 · Cited by 26
Zur Flexibilität aliphatischer Polyester
Knecht, M. R., & Elias, H. (1972) · Die Makromolekulare Chemie · doi:10.1002/macp.1972.021570101 · Cited by 23
Yang, A., & Wu, R. (2002) · Journal of Applied Polymer Science · doi:10.1002/app.10149 · Cited by 20
Lindberg, T. (2000) · Polymer · doi:10.1016/s0032-3861(99)00559-5 · Cited by 17
Improvement of processability of poly(?-caprolactone) by radiation techniques
Darwis, D., Nishimura, K. J., Mitomo, H., & Yoshii, F. (1999) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19991114)74:7<1868::aid-app32>3.0.co;2-n · Cited by 16
Kuhn, L. T. (2005) · Elsevier eBooks · doi:10.1016/b978-0-12-238662-6.50008-2 · Cited by 15
Radiation Effects on Blends of Poly(ε-Caprolactone) and Diatomites
Mitomo, H., Sasada, K., Nishimura, K. J., Yoshii, F., & Nagasawa, N. (2003) · Journal of Polymers and the Environment · doi:10.1023/b:jooe.0000010055.87964.c9 · Cited by 13
Syntheses and antitumor activities of polymers containing amino acid and 5-fluorouracil moieties
Park, J., Ha, C., & Cho, W. (1999) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/(sici)1099-0518(19990601)37:11<1643::aid-pola9>3.0.co;2-2 · Cited by 10
McClelland, R., Dennis, R. G., Reid, L. M., Palsson, B., & Macdonald, J. M. (2005) · Elsevier eBooks · doi:10.1016/b978-0-12-238662-6.50009-4 · Cited by 7
Rouxhet, L., Mestdagh, M. M., & Legras, R. (2000) · Nuclear Instruments and Methods in Physics Research Section B Beam Interactions with Materials and Atoms · doi:10.1016/s0168-583x(00)00314-1 · Cited by 4
Research works printed but not linked: 11
- Matthew H. W. T., 2002, Polymeric Biomaterials, 167
- Hoerstrup S. P., 2004, Biomaterials Science, 709 ff
- 10.1002/(sici)1099-0518(199808)36:11<1805::aid-pola14>3.0.co;2-i · doi:10.1002/(sici)1099-0518(199808)36:11<1805::aid-pola14>3.0.co;2-i
- 10.1002/(sici)1097-4628(19991114)74:7<1815::aid-app25>3.0.co;2-x · doi:10.1002/(sici)1097-4628(19991114)74:7<1815::aid-app25>3.0.co;2-x
- 10.1002/(sici)1099-0518(19990601)37:11<1651::aid-pola10>3.0.co;2-m · doi:10.1002/(sici)1099-0518(19990601)37:11<1651::aid-pola10>3.0.co;2-m
- Michielsen S., 1999, Polymer Handbook, 2/VII/547 ff
- Scudiero D. A., 1988, Cancer Res., 48, 4827
- Olejniczak J., 1991, Radiat. Phys. Chem., 37, 499
- Rosiak J., 1988, Radiat. Phys. Chem., 32, 691
- Schuld N., 1999, Polymer Handbook, 2/VII/247 ff
- Pauly S., 1999, Polymer Handbook, 2/VI/543
Cited by
Shape-memory polymers as a technology platform for biomedical applications
Lendlein, A., Behl, M., Hiebl, B., & Wischke, C. (2010) · Expert Review of Medical Devices · doi:10.1586/erd.10.8 · Cited by 469
Shape-Memory Polymers for Biomedical Applications
Yakacki, C. M., & Gall, K. (2009) · Advances in polymer science · doi:10.1007/12_2009_23 · Cited by 167
Biodegradable Elastomers for Biomedical Applications and Regenerative Medicine
Bat, E., Zhang, Z., Feijén, J., Grijpma, D. W., & Poot, A. A. (2014) · Regenerative Medicine · doi:10.2217/rme.14.4 · Cited by 84
Electro-spun Membranes as Scaffolds for Human Corneal Endothelial Cells
Kruse, M., Walter, P., Bauer, B., Rütten, S., Schaefer, K., Plange, N., Gries, T., Jockenhoevel, S., & Fuest, M. (2017) · Current Eye Research · doi:10.1080/02713683.2017.1377258 · Cited by 79
Design principles for polymers as substratum for adherent cells
Scharnagl, N., Lee, S., Hiebl, B., Sisson, A. L., & Lendlein, A. (2010) · Journal of Materials Chemistry · doi:10.1039/c0jm00997k · Cited by 61
Metadata
- Authors
- Filipczak, K., Wozniak, M., Ulanski, P., Olah, L., Przybytniak, G., Olkowski, R. M., Lewandowska‐Szumiel, M., & Rosiak, J. M.
- Affiliations
- Lodz University of Technology (PL)
- Corresponding author
- Rosiak, Janusz M.
- Venue
- Macromolecular Bioscience
- Publisher
- Wiley
- Published
- 2006-04-03
- Volume
- 6
- Issue
- 4
- Pages
- 261-273
- ISSN
- 1616-5187 (ISSN-L)
- 1616-5195
- OpenAlex
- W1968996065
- Cited by
- 54
- References
- 48
- Citations by year
- 2026: 3 · 2025: 2 · 2023: 1 · 2022: 3 · 2021: 2 · 2020: 5 · 2019: 3 · 2018: 7 · 2017: 3 · 2016: 2 · 2015: 3 · 2014: 3 · 2013: 1 · 2012: 1
- FWCI
- 1.84
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Macromolecular Bioscience (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer Nanocomposite Synthesis and Irradiation
- Physical Sciences › Engineering › Biomedical Engineering › Bone Tissue Engineering Materials
- Keywords
- polycaprolactone, electron irradiation, radiation sterilization, crosslinking, sol-gel transition, polymer swelling, molecular weight changes, long-lived radicals, crystalline regions, compressive modulus, biocompatibility, biomaterials
- MeSH terms
- Biocompatible Materials, Electrons, Materials Testing, Polyesters
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.