Biocomposites Made from Short Abaca Fiber and Biodegradable Polyesters
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
Natural fiber‐reinforced biodegradable polyester composites were prepared from biodegradable polyesters and surface‐untreated or ‐treated abaca fibers (length ca. 5 mm) by melt mixing and subsequent injection molding. Poly(butylene succinate)(PBS), polyestercarbonate (PEC)/poly(lactic acid)(PLA) blend, and PLA were used as biodegradable polyesters. Esterifications using acetic anhydride and butyric anhydride, alkali treatment, and cyanoethylation were performed as surface treatments on the fiber. The flexural moduli of all the fiber‐reinforced composites increased with fiber content. The effect of the surface treatment on the flexural modulus of the fiber‐reinforced composites was not so pronounced. The flexural strength of PBS composites increased with fiber content, and esterification of the fiber by butyric anhydride gave the best result. For the PEC/PLA composites, flexural strength increased slightly with increased fiber content (0–20 wt.‐%) in the case of using untreated fiber, while it increased considerably in the case of using the fiber esterified by butyric anhydride. For the PLA composite, flexural strength did not increase with the fiber reinforcement. The result of soil‐burial tests showed that the composites using untreated fiber have a higher weight loss than both the neat resin and the composites made using acetylated fiber. Flexural modulus of PBS composites as a function of fiber content. magnified imageFlexural modulus of PBS composites as a function of fiber content.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Composites reinforced with cellulose based fibres
Bledzki, A. (1999) · Progress in Polymer Science · doi:10.1016/s0079-6700(98)00018-5 · Cited by 4,696
Aerobic biodegradation of cellulose acetate
Buchanan, C. M., Gardner, R. M., & Komarek, R. J. (1993) · Journal of Applied Polymer Science · doi:10.1002/app.1993.070471001 · Cited by 254
Synthesis and crystallization behavior of poly( l -lactide)- block -poly(ϵ-caprolactone) copolymer
Kim, J. K., Park, D.-J., Lee, M.-S., & Ihn, K. J. (2001) · Polymer · doi:10.1016/s0032-3861(01)00217-8 · Cited by 147
Cited by
An Overview of Polylactides as Packaging Materials
Auras, R., Harte, B., & Selke, S. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200400043 · Cited by 3,454
Processing technologies for poly(lactic acid)
Lim, L.-T., Auras, R., & Rubino, M. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.05.004 · Cited by 2,766
John, M. J., & Anandjiwala, R. D. (2008) · Polymer Composites · doi:10.1002/pc.20461 · Cited by 1,291
Biodegradable polymers/bamboo fiber biocomposite with bio-based coupling agent
Lee, S.-H., & Wang, S. (2006) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2005.04.015 · Cited by 822
A review of natural fibers used in biocomposites: plant, animal and regenerated cellulose fibers
Ramamoorthy, S. K., Skrifvars, M., & Persson, A. (2015) · Polymer Reviews · doi:10.1080/15583724.2014.971124 · Cited by 801
Huda, M. S., Drzal, L. T., Mohanty, A. K., & Misra, M. (2008) · Composites Science and Technology · doi:10.1016/j.compscitech.2007.06.022 · Cited by 699
Impact and tensile properties of PLA/Cordenka and PLA/flax composites
Bax, B., & Müssig, J. (2008) · Composites Science and Technology · doi:10.1016/j.compscitech.2008.01.004 · Cited by 637
“A dwell pressure of 10 MPa was used for 5 all composites except for the composite with a fibre proportion of 40% for which a 6 pressure of 12 MPa was used.”
BackgroundInfluentialNatural Fiber Reinforced Composites
Fuqua, M. A., Huo, S., & Ulven, C. A. (2012) · Polymer Reviews · doi:10.1080/15583724.2012.705409 · Cited by 488
Rangappa, S. M., Siengchin, S., Parameswaranpillai, J., Jawaid, M., & Ozbakkaloglu, T. (2022) · Polymer Composites · doi:10.1002/pc.26413 · Cited by 469
Recycling of bioplastics, their blends and biocomposites: A review
Soroudi, A., & Jakubowicz, I. (2013) · European Polymer Journal · doi:10.1016/j.eurpolymj.2013.07.025 · Cited by 432
Bledzki, A. K., & Jaszkiewicz, A. (2010) · Composites Science and Technology · doi:10.1016/j.compscitech.2010.06.005 · Cited by 415
Mechanical properties of PLA composites with man-made cellulose and abaca fibres
Bledzki, A. K., Jaszkiewicz, A., & Scherzer, D. (2009) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2009.01.002 · Cited by 400
Comparison of injection moulded, natural fibre-reinforced composites with PP and PLA as matrices
Mofokeng, J. P., Luyt, A. S., Tábi, T., & Kovács, J. (2012) · Journal of Thermoplastic Composite Materials · doi:10.1177/0892705711423291 · Cited by 391
PLA Based Biopolymer Reinforced with Natural Fibre: A Review
Mukherjee, T., & Kao, N. (2011) · Journal of Polymers and the Environment · doi:10.1007/s10924-011-0320-6 · Cited by 348
Huda, M. S., Drzal, L. T., Misra, M., & Mohanty, A. K. (2006) · Journal of Applied Polymer Science · doi:10.1002/app.24829 · Cited by 346
Preparation and properties of recycled HDPE/natural fiber composites
Lei, Y., Wu, Q., Yao, F., & Xu, Y. (2007) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2007.02.001 · Cited by 337
Effect of thermo-mechanical cycles on the physico-chemical properties of poly(lactic acid)
Pillin, I., Montrelay, N., Bourmaud, A., & Grohens, Y. (2008) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2007.12.005 · Cited by 289
Abaca fibre reinforced PP composites and comparison with jute and flax fibre PP composites
Bledzki, A. K., Mamun, A. A., & Faruk, O. (2007) · Express Polymer Letters · doi:10.3144/expresspolymlett.2007.104 · Cited by 254
Metadata
- Authors
- Shibata, M., Ozawa, K., Teramoto, N., Yosomiya, R., & Takeishi, H.
- Venue
- Macromolecular Materials and Engineering
- Publisher
- Wiley
- Published
- 2003-01
- Volume
- 288
- Issue
- 1
- Pages
- 35-43
- ISSN
- 1438-7492 (ISSN-L)
- 1439-2054
- OpenAlex
- W1974750222
- Cited by
- 235
- References
- 3
- FWCI
- 5.22
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.