A New Strategy to Prepare Polymer‐based Shape Memory Elastomers
The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
Abstract
A new strategy that utilizes the microphase separation of block copolymer and phase transition of small molecules for preparing polymer‐based shape memory elastomer has been proposed. According to this strategy, a novel kind of shape memory elastomer comprising styrene‐b‐(ethylene‐co‐butylene)‐b‐styrene (SEBS) and paraffin has been prepared. Because paraffins are midblock‐selective molecules for SEBS, they will preferentially enter and swell EB blocks supporting paraffins as an excellent switch phase for shape memory effect. Microstructures of SEBS/paraffin composites have been characterized by transmission electron microscopy, polarized light microscopy, and differential scanning calorimetry. The composites demonstrate various phase morphologies with regard to different paraffin loading. It has been found that under low paraffin loading, all the paraffins precisely embed in and swell EB‐rich domains. While under higher loading, part of the paraffins become free and a larger‐scaled phase separation has been observed. However, within wide paraffin loadings, all composites show good shape fixing, shape recovery performances, and improved tensile properties. Compared to the reported methods for shape memory elastomers preparation, this method not only simplifies the fabrication procedure from raw materials to processing but also offers a controllable approach for the optimization of shape memory properties as well as balancing the rigidity and softness of the material. magnified image
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Review of progress in shape-memory polymers
Liu, C., Qin, H., & Mather, P. T. (2007) · Journal of Materials Chemistry · doi:10.1039/b615954k · Cited by 1,942
Multifunctional Shape‐Memory Polymers
Behl, M., Razzaq, M. Y., & Lendlein, A. (2010) · Advanced Materials · doi:10.1002/adma.200904447 · Cited by 971
Yakacki, C. M., Shandas, R., Lanning, C., Rech, B., Eckstein, A., & Gall, K. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.01.030 · Cited by 618
Triple‐Shape Polymeric Composites (TSPCs)
Luo, X., & Mather, P. T. (2010) · Advanced Functional Materials · doi:10.1002/adfm.201000052 · Cited by 276
A novel type of shape memory polymer blend and the shape memory mechanism
Zhang, H., Wang, H., Zhong, W., & Du, Q. (2009) · Polymer · doi:10.1016/j.polymer.2009.01.011 · Cited by 270
Shape memory polymers with built-in threshold temperature sensors
Kunzelman, J., Chung, T., Mather, P. T., & Weder, C. (2008) · Journal of Materials Chemistry · doi:10.1039/b718445j · Cited by 241
Conductive shape memory nanocomposites for high speed electrical actuation
Luo, X., & Mather, P. T. (2010) · Soft Matter · doi:10.1039/c001295e · Cited by 229
Small, W., Buckley, P. R., Wilson, T. S., Benett, W. J., Hartman, J., Saloner, D., & Maitland, D. J. (2007) · IEEE Transactions on Biomedical Engineering · doi:10.1109/tbme.2006.889771 · Cited by 124
Small, W., Wilson, T. S., Buckley, P. R., Benett, W. J., Loge, J. M., Hartman, J., & Maitland, D. J. (2007) · IEEE Transactions on Biomedical Engineering · doi:10.1109/tbme.2007.892921 · Cited by 61
Cited by
Umair, M. M., Zhang, Y., Iqbal, K., Zhang, S., & Tang, B. (2019) · Applied Energy · doi:10.1016/j.apenergy.2018.11.017 · Cited by 852
A general approach towards thermoplastic multishape-memory polymers via sequence structure design
Luo, Y., Guo, Y., Gao, X., Li, B., & Xie, T. (2013) · Advanced Materials · doi:10.1002/adma.201202884 · Cited by 188
Xia, S., Li, X., Wang, Y., Pan, Y., Zheng, Z., Ding, X., & Peng, Y. (2014) · Smart Materials and Structures · doi:10.1088/0964-1726/23/8/085005 · Cited by 25
Metadata
- Authors
- Song, S., Feng, J., & Wu, P.
- Venue
- Macromolecular Rapid Communications
- Publisher
- Wiley
- Published
- 2011-07-26
- Volume
- 32
- Issue
- 19
- Pages
- 1569-1575
- ISSN
- 1022-1336 (ISSN-L)
- 1521-3927
- OpenAlex
- W2004275847
- Cited by
- 73
- References
- 9
- FWCI
- 3.00
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.