The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Buildup of ultrathin multilayer films by a self‐assembly process, 1 consecutive adsorption of anionic and cationic bipolar amphiphiles on charged surfaces
Abstract
An anionic and a cationic bipolar amphiphile containing rigid biphenyl cores were synthesized. The compounds were dissolved in a mixture of dimethylsulfoxide (DMSO) and water and pure water, respectively. When a solid substrate with a positively charged planar surface is immersed in the solution containing the negatively charged bipolar amphiphile, a monolayer of the amphiphile is adsorbed and due to its bipolar structure the surface charge is reversed. After rinsing in pure water the substrate is immersed in the solution containing the positively charged bipolar amphiphile. Again a monolayer is adsorbed but now the original surface charge is restored. By repeating both steps in a cyclic fashion alternating multilayer assemblies of both compounds are obtained. It is demonstrated that multilayer films, composed of at least 35 consecutively alternating layers, which corresponds to a total film thickness of 170 nm can be assembled.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Insoluble monolayers at liquid-gas interfaces
Daen, J. (1966) · Journal of Colloid and Interface Science · doi:10.1016/0021-9797(66)90041-5 · Cited by 2,646
Swalen, J. D., Allara, D. L., Andrade, J. D., Chandross, E. A., Garoff, S., Israelachvili, J., McCarthy, T. J., Murray, R., & Pease, R. F. (1987) · Langmuir · doi:10.1021/la00078a011 · Cited by 792
Adsorption and the Gibbs Surface Excess
Chattoraj, D. K., & Birdi, K. S. (1984) · Springer eBooks · doi:10.1007/978-1-4615-8333-2 · Cited by 582
Coulon, G., Russell, T. P., Deline, V. R., & Green, P. F. (1989) · Macromolecules · doi:10.1021/ma00196a006 · Cited by 360
Covalently attached organic monolayers on semiconductor surfaces
Haller, I. (1978) · Journal of the American Chemical Society · doi:10.1021/ja00494a003 · Cited by 329
Cited by
Fuzzy Nanoassemblies: Toward Layered Polymeric Multicomposites
Decher, G. (1997) · Science · doi:10.1126/science.277.5330.1232 · Cited by 10,054
Self-citationNanoengineering of Inorganic and Hybrid Hollow Spheres by Colloidal Templating
Caruso, F., Caruso, R. A., & Möhwald, H. (1998) · Science · doi:10.1126/science.282.5391.1111 · Cited by 4,135
Polymer/Silica Nanocomposites: Preparation, Characterization, Properties, and Applications
Zou, H., Wu, S., & Shen, J. (2008) · Chemical Reviews · doi:10.1021/cr068035q · Cited by 2,121
Ariga, K., Hill, J. P., & Ji, Q. (2007) · Physical Chemistry Chemical Physics · doi:10.1039/b700410a · Cited by 1,256
Form and Function in Multilayer Assembly: New Applications at the Nanoscale
Hammond, P. T. (2004) · Advanced Materials · doi:10.1002/adma.200400760 · Cited by 1,251
Immobilization strategies to develop enzymatic biosensors
Sassolas, A., Blum, L. J., & Leca-Bouvier, B. D. (2012) · Biotechnology Advances · doi:10.1016/j.biotechadv.2011.09.003 · Cited by 1,130
Innovation in Layer-by-Layer Assembly
Richardson, J. J., Cui, J., Björnmalm, M., Braunger, J. A., Ejima, H., & Caruso, F. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00627 · Cited by 922
Formation, stability and properties of multilayer emulsions for application in the food industry
Guzey, D., & McClements, D. J. (2006) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2006.11.021 · Cited by 903
Molecular Interactions Driving the Layer-by-Layer Assembly of Multilayers
Borges, J., & Mano, J. F. (2014) · Chemical Reviews · doi:10.1021/cr400531v · Cited by 882
Layer-by-layer Nanoarchitectonics: Invention, Innovation, and Evolution
Ariga, K., Yamauchi, Y., Rydzek, G., Ji, Q., Yonamine, Y., Wu, K. C.-W., & Hill, J. P. (2014) · Chemistry Letters · doi:10.1246/cl.130987 · Cited by 850
Decher, G., & Hong, J. D. (1991) · Berichte der Bunsengesellschaft für physikalische Chemie · doi:10.1002/bbpc.19910951122 · Cited by 838
Self-citationThe Chemistry of Organic Nanomaterials
Grimsdale, A. C., & Müllen, K. (2005) · Angewandte Chemie International Edition · doi:10.1002/anie.200500805 · Cited by 705
Recent progress in the science of complex coacervation
Sing, C. E., & Perry, S. L. (2020) · Soft Matter · doi:10.1039/d0sm00001a · Cited by 676
Titanium Oxide Nanosheets: Graphene Analogues with Versatile Functionalities
Wang, L., & Sasaki, T. (2014) · Chemical Reviews · doi:10.1021/cr400627u · Cited by 646
Ariga, K., Li, J., Fei, J., Ji, Q., & Hill, J. P. (2016) · Advanced Materials · doi:10.1002/adma.201502545 · Cited by 541
Molecular Assembly of Schiff Base Interactions: Construction and Application
Jia, Y., & Li, J. (2015) · Chemical Reviews · doi:10.1021/cr400559g · Cited by 524
Ariga, K., Yamauchi, Y., Mori, T., & Hill, J. P. (2013) · Advanced Materials · doi:10.1002/adma.201302283 · Cited by 493
Next generation, sequentially assembled ultrathin films: beyond electrostatics
Quinn, J. F., Johnston, A. P. R., Such, G. K., Zelikin, A. N., & Caruso, F. (2007) · Chemical Society Reviews · doi:10.1039/b610778h · Cited by 451
Nano/Micro‐Manufacturing of Bioinspired Materials: a Review of Methods to Mimic Natural Structures
Zhang, C., Mcadams, D. A., & Grunlan, J. C. (2016) · Advanced Materials · doi:10.1002/adma.201505555 · Cited by 443
Layer-by-layer self-assembled shells for drug delivery
Ariga, K., Lvov, Y. M., Kawakami, K., Ji, Q., & Hill, J. P. (2011) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2011.03.016 · Cited by 439
Substrate‐Independent Layer‐by‐Layer Assembly by Using Mussel‐Adhesive‐Inspired Polymers
Lee, H., Lee, Y., Statz, A. R., Rho, J., Park, T. G., & Messersmith, P. B. (2008) · Advanced Materials · doi:10.1002/adma.200702378 · Cited by 439
Yao, L., & He, J. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2013.12.003 · Cited by 435
Layer-by-layer assembly of microcapsules and their biomedical applications
Tong, W., Song, X., & Gao, C. (2012) · Chemical Society Reviews · doi:10.1039/c2cs35088b · Cited by 427
Porous calcium carbonate microparticles as templates for encapsulation of bioactive compounds
Sukhorukov, G. B., Volodkin, D. V., Günther, A. M., Petrov, A. I., Shenoy, D. B., & Möhwald, H. (2004) · J. Mater. Chem. · doi:10.1039/b402617a · Cited by 421
Layer-by-layer assembled multicomposite films
Decher, G., Eckle, M., Schmitt, J., & Struth, B. (1998) · Current Opinion in Colloid & Interface Science · doi:10.1016/s1359-0294(98)80039-3 · Cited by 419
Self-citationPolyelectrolyte multilayer capsules as vehicles with tunable permeability
Antipov, A. A., & Sukhorukov, G. B. (2004) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2004.07.006 · Cited by 410
Optically Addressable Nanostructured Capsules
Radt, B., Smith, T. A., & Caruso, F. (2004) · Advanced Materials · doi:10.1002/adma.200400920 · Cited by 404
Self‐Repairing Coatings Containing Active Nanoreservoirs
Shchukin, D. G., & Möhwald, H. (2007) · Small · doi:10.1002/smll.200700064 · Cited by 373
Layer-by-layer assembly for rapid fabrication of thick polymeric films
Li, Y., Wang, X., & Sun, J. (2012) · Chemical Society Reviews · doi:10.1039/c2cs35107b · Cited by 369
Xiao, F.-X., Pagliaro, M., Xu, Y.-J., & Liu, B. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00781j · Cited by 368
Rühe, J., Ballauff, M., Biesalski, M., Dziezok, P., Gröhn, F., Johannsmann, D., Houbenov, N., Hugenberg, N., Konradi, R., Minko, S., et al. (2012) · Advances in Polymer Science · doi:10.1007/b11268 · Cited by 363
Engineered hydrogen-bonded polymer multilayers: from assembly to biomedical applications
Such, G. K., Johnston, A. P. R., & Caruso, F. (2011) · Chemical Society Reviews · doi:10.1039/c0cs00001a · Cited by 350
Core–shell structured titanium dioxide nanomaterials for solar energy utilization
Li, W., Elzatahry, A., Aldhayan, D., & Zhao, D. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00443a · Cited by 347
Shi, F., Wang, Z., & Zhang, X. (2005) · Advanced Materials · doi:10.1002/adma.200402090 · Cited by 344
Layer‐By‐Layer‐Assembled Capsules and Films for Therapeutic Delivery
Becker, A. L., Johnston, A. P. R., & Caruso, F. (2010) · Small · doi:10.1002/smll.201000379 · Cited by 336
Designer polymer–quantum dot architectures
Tomczak, N., Jańczewski, D., Han, M., & Vancso, G. J. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.11.004 · Cited by 332
Zhang, X., Xu, Y., Zhang, X., Wu, H., Shen, J., Chen, R., Xiong, Y., Li, J., & Guo, S. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.10.002 · Cited by 325
Multilayer packaging: Advances in preparation techniques and emerging food applications
Anukiruthika, T., Sethupathy, P., Wilson, A., Kashampur, K., Moses, J. A., & Anandharamakrishnan, C. (2020) · Comprehensive Reviews in Food Science and Food Safety · doi:10.1111/1541-4337.12556 · Cited by 320
Polyferrocenylsilanes: synthesis, properties, and applications
Hailes, R. L. N., Oliver, A. M., Gwyther, J., Whittell, G. R., & Manners, I. (2016) · Chemical Society Reviews · doi:10.1039/c6cs00155f · Cited by 317
Fluorescent Supramolecular Polymeric Materials
Wang, H., Ji, X., Li, Z., & Huang, F. (2017) · Advanced Materials · doi:10.1002/adma.201606117 · Cited by 302
Forrest, E., Williamson, E., Buongiorno, J., Hu, L.-W., Rubner, M., & Cohen, R. (2010) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2009.10.008 · Cited by 301
Superhydrophilic (superwetting) surfaces: A review on fabrication and application
Otitoju, T. A., Ahmad, A. L., & Ooi, B. S. (2017) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2016.12.016 · Cited by 298
Polyelectrolyte multilayered assemblies in biomedical technologies
Costa, R. R., & Mano, J. F. (2014) · Chemical Society Reviews · doi:10.1039/c3cs60393h · Cited by 296
Building biomedical materials layer-by-layer
Hammond, P. T. (2012) · Materials Today · doi:10.1016/s1369-7021(12)70090-1 · Cited by 290
Intelligent micro- and nanocapsules
Sukhorukov, G., Fery, A., & Möhwald, H. (2005) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2005.06.008 · Cited by 288
Nishiguchi, A., Yoshida, H., Matsusaki, M., & Akashi, M. (2011) · Advanced Materials · doi:10.1002/adma.201101787 · Cited by 285
Layer-by-Layer Assembly of Thin Film Zener Diodes from Conducting Polymers and CdSe Nanoparticles
Cassagneau, T., Mallouk, T. E., & Fendler, J. H. (1998) · Journal of the American Chemical Society · doi:10.1021/ja9806027 · Cited by 274
Bae, W., Kim, H. N., Kim, D., Park, S., Jeong, H. E., & Suh, K. (2014) · Advanced Materials · doi:10.1002/adma.201303412 · Cited by 265
Layer-by-layer assembly of silica-based flame retardant thin film on PET fabric
Carosio, F., Laufer, G., Alongi, J., Camino, G., & Grunlan, J. C. (2011) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2011.02.019 · Cited by 257
Schoeler, B., Kumaraswamy, G., & Caruso, F. (2002) · Macromolecules · doi:10.1021/ma011349p · Cited by 256
Self‐Assembled Wound Dressings Silence MMP‐9 and Improve Diabetic Wound Healing In Vivo
Castleberry, S. A., Almquist, B. D., Li, W., Reis, T., Chow, J., Mayner, S., & Hammond, P. T. (2016) · Advanced Materials · doi:10.1002/adma.201503565 · Cited by 254
Nanoscale neuro-integrative coatings for neural implants
He, W., & Bellamkonda, R. V. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.08.021 · Cited by 156
Carosio, F., Colonna, S., Fina, A., Rydzek, G., Hemmerlé, J., Jierry, L., Schaaf, P., & Boulmedais, F. (2014) · Chemistry of Materials · doi:10.1021/cm501359e · Cited by 111
Chen, W. D., Kohll, A. X., Nguyen, B. H., Koch, J., Heckel, R., Stark, W. J., Ceze, L., Strauss, K., & Grass, R. N. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201901672 · Cited by 104
A 3D toolbox to enhance physiological relevance of human tissue models
Picollet-D’hahan, N., Dolega, M. E., Liguori, L., Marquette, C., Le Gac, S., Gidrol, X., & Martin, D. K. (2016) · Trends in Biotechnology · doi:10.1016/j.tibtech.2016.06.012 · Cited by 65
Metadata
- Authors
- Decher, G., & Hong, J.
- Venue
- Makromolekulare Chemie. Macromolecular Symposia
- Publisher
- Wiley
- Published
- 1991-06
- Volume
- 46
- Issue
- 1
- Pages
- 321-327
- ISSN
- 0258-0322 (ISSN-L)
- OpenAlex
- W2005062196
- Cited by
- 1,447
- References
- 5
- FWCI
- 2.61
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.