The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
3D Printing of polymer composites: A short review
Open accessAbstract
Composite or reinforced materials, especially in the class of polymers, are becoming prominent materials for the diversified range of engineering and scientific utilities because of their physical, chemical, mechanical, and structural excellences. Indeed, the main credit for the widespread acknowledgment of polymer matrix composites (PMCs) goes to the various types of natural and synthetic reinforcements, which resulted in good interfacial chemistries. However, the intrinsic challenges of traditional manufacturing technologies always presented restrictions in the development of application specific PMCs. Reportedly, with an evolution of three-dimensional printing (3DP) technologies, the applications of PMCs have been transformed as these enabled the production of near-net shapes with high degree of control over the design, reinforcements, and processing parametric while maintaining the waste associated at minimal level. However, the industrial benefits of 3DP technologies for still limited owing to the lack of awareness among the young professionals and industrialists. Moreover, the literature available in this regard is either too scattered making it tedious for the professionals to go through or limited to only fundamental concepts. Therefore, the concept of this review paper is to provide brief research-based insights of different 3DP technologies (namely, fused deposition modeling, selective laser sintering, stereolithography, laminated object manufacturing, and inkjet printing), material systems, applications, and the future paradigms of research as a short and precise document.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Lam, C. X. F., Savalani, M. M., Teoh, S.-H., & Hutmacher, D. W. (2008) · Biomedical Materials · doi:10.1088/1748-6041/3/3/034108 · Cited by 444
Multi-shape active composites by 3D printing of digital shape memory polymers
Wu, J., Yuan, C., Ding, Z., Isakov, M., Mao, Y., Wang, T., Dunn, M. L., & Qi, H. J. (2016) · Scientific Reports · doi:10.1038/srep24224 · Cited by 399
Cited by
Kafle, A., Luis, E., Silwal, R., Pan, H. M., Shrestha, P. L., & Bastola, A. K. (2021) · Polymers · doi:10.3390/polym13183101 · Cited by 587
Extrusion-Based 3D Printing Applications of PLA Composites: A Review
Tümer, E. H., & Erbil, H. Y. (2021) · Coatings · doi:10.3390/coatings11040390 · Cited by 454
3D printing technology; methods, biomedical applications, future opportunities and trends
Bozkurt, Y., & Karayel, E. (2021) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2021.07.050 · Cited by 384
Extrusion-based additive manufacturing technologies: State of the art and future perspectives
Altıparmak, S. C., Yardley, V. A., Shi, Z., & Lin, J. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.09.032 · Cited by 320
Advances in selective laser sintering of polymers
Han, W., Kong, L., & Xu, M. (2022) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/ac9096 · Cited by 254
Metadata
- Authors
- Singh, S., Ramakrishna, S., & Berto, F.
- Venue
- Material Design & Processing Communications
- Publisher
- Wiley
- Published
- 2019-08-26
- Volume
- 2
- Issue
- 2
- ISSN
- 2577-6576 (ISSN-L)
- OpenAlex
- W2965197074
- Cited by
- 175
- References
- 2
- FWCI
- 6.98
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: 3D Printing of polymer composites: A short review. https://app.cochat.ai/papers/10.1002/mdp2.97
- The paper
- Singh, S., Ramakrishna, S., & Berto, F. (2020). 3D Printing of polymer composites: A short review. Material Design & Processing Communications. https://doi.org/10.1002/mdp2.97
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.