The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
A phase‐field model for chemo‐mechanical induced fracture in lithium‐ion battery electrode particles
Open accessAbstract
Summary: Capacity fade in conventional Li‐ion battery systems due to chemo‐mechanical degradation during charge–discharge cycles is the bottleneck in high‐performance battery design. Stresses generated by diffusion‐mechanical coupling in Li‐ion intercalation and deintercalation cycles, accompanied by swelling and shrinking at finite strains, cause micro‐cracks, which finally disturb the electrical conductivity and isolate the electrode particles. This leads to battery capacity fade. As a first attempt towards a reliable description of this complex phenomenon, we propose a novel finite strain theory for chemo‐elasticity coupled with phase‐field modeling of fracture, which regularizes a sharp crack topology. We apply a rigorous geometric approach to the diffusive crack modeling based on the introduction of a global evolution equation of regularized crack surface, governed by the crack phase field. The irreversible evolution of the crack phase field is modeled through a novel critical stress‐based growth function. A modular concept is outlined for linking of the diffusive crack modeling to the complex chemo‐elastic material response of the bulk material. Here, we incorporate standard as well as gradient‐extended Cahn–Hilliard‐type diffusion for the Li‐ions, where the latter accounts for a possible phase segregation. From the viewpoint of the methodology, the separation of modules for the crack evolution and the bulk response provides a highly attractive and transparent structure of the multi‐physics problem. This structure is exploited on the numerical side by constructing a robust finite element method, based on an algorithmic decoupling of updates for the crack phase field and the state variables of the chemo‐mechanical bulk response. We demonstrate the performance of the proposed coupled multi‐field formulation by an analysis of representative boundary value problems. Copyright © 2015 John Wiley & Sons, Ltd.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Modeling of Galvanostatic Charge and Discharge of the Lithium/Polymer/Insertion Cell
Doyle, M., Fuller, T. F., & Newman, J. (1993) · Journal of The Electrochemical Society · doi:10.1149/1.2221597 · Cited by 4,328 · cited 9×
“Newmann J, Thomas-Alyea KE.”
MethodInfluentialSimulation and Optimization of the Dual Lithium Ion Insertion Cell
Fuller, T. F., Doyle, M., & Newman, J. (1994) · Journal of The Electrochemical Society · doi:10.1149/1.2054684 · Cited by 2,057
Stress generation and fracture in lithium insertion materials
Christensen, J., & Newman, J. (2006) · Journal of Solid State Electrochemistry · doi:10.1007/s10008-006-0095-1 · Cited by 727
Cited by
Safety issues and mechanisms of lithium-ion battery cell upon mechanical abusive loading: A review
Liu, B., Jia, Y., Yuan, C., Wang, L., Gao, X., Yin, S., & Xu, J. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2019.06.036 · Cited by 816
A review on modeling of electro-chemo-mechanics in lithium-ion batteries
Zhao, Y., Stein, P., Bai, Y., Al-Siraj, M., Yang, Y., & Xu, B.-X. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.12.011 · Cited by 431
Phase field fracture modelling using quasi-Newton methods and a new adaptive step scheme
Kristensen, P. K., & Martínez-Pañeda, E. (2020) · Theoretical and Applied Fracture Mechanics · doi:10.1016/j.tafmec.2019.102446 · Cited by 300
Bucci, G., Swamy, T., Chiang, Y.-M., & Carter, W. C. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta03199h · Cited by 282
Metadata
- Authors
- Miehe, C., Dal, H., Schänzel, L. ‐., & Raina, A.
- Venue
- International Journal for Numerical Methods in Engineering
- Publisher
- Wiley
- Published
- 2015-10-15
- Volume
- 106
- Issue
- 9
- Pages
- 683-711
- ISSN
- 0029-5981 (ISSN-L)
- 1097-0207
- OpenAlex
- W2130091774
- Cited by
- 181
- References
- 3
- FWCI
- 7.49
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A phase‐field model for chemo‐mechanical induced fracture in lithium‐ion battery electrode particles. https://app.cochat.ai/papers/10.1002/nme.5133
- The paper
- Miehe, C., Dal, H., Schänzel, L. ‐., & Raina, A. (2016). A phase‐field model for chemo‐mechanical induced fracture in lithium‐ion battery electrode particles. International Journal for Numerical Methods in Engineering. https://doi.org/10.1002/nme.5133
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.