The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
Mechanical and thermal properties of dragline silk from the spider Nephila clavipes
Abstract
Dragline silk from the spider, Nephila clavipes, was characterized by thermal analysis (TGA, DSC, DMA), computational modeling, scanning electron microscopy and by quasi‐static as well as high rates of strain. Thermal stability to about 230°C was observed by TGA, two transitions by DMA, −75°C, representative of localized motion in the amorphous domain, and a main chain motion associated with partial melt at 210°C. Tensile tests indicated average initial modulus, ultimate tensile strength and ultimate tensile strain of 22 GPa, 1.1 GPa and 9%, respectively. The corresponding properties of the best fibers tested were 60 GPa, 2.9 GPa and 11%, respectively. High strain rates (>50,000%/sec) indicated similar mechanical properties to the average values indicated above. Microscopy showed compressive and tensile strains to failure of 34%. Computational modeling yielded a crystal modulus of 200 GPa.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A new force field for molecular mechanical simulation of nucleic acids and proteins
Weiner, S. J., Kollman, P. A., Case, D. A., Singh, U. C., Ghio, C., Alagona, G., Profeta, S., & Weiner, P. (1984) · Journal of the American Chemical Society · doi:10.1021/ja00315a051 · Cited by 4,639
The structure and properties of spider silk
Gosline, J. M., DeMont, M. E., & Denny, M. W. (1986) · Endeavour · doi:10.1016/0160-9327(86)90049-9 · Cited by 611
Gosline, J. M., Denny, M. W., & DeMont, M. E. (1984) · Nature · doi:10.1038/309551a0 · Cited by 392
The Physical Properties of Spider’s Silk and Their Role in the Design of Orb-Webs
Denny, M. (1976) · Journal of Experimental Biology · doi:10.1242/jeb.65.2.483 · Cited by 345
Comparative studies of fibroins
Warwicker, J. O. (1960) · Journal of Molecular Biology · doi:10.1016/s0022-2836(60)80046-0 · Cited by 272
Fossey, S. A., Némethy, G., Gibson, K. D., & Scheraga, H. A. (1991) · Biopolymers · doi:10.1002/bip.360311309 · Cited by 205
Self-citationBeckwitt, R., & Arcidiacono, S. M. (1994) · Journal of Biological Chemistry · doi:10.1016/s0021-9258(17)37425-2 · Cited by 105
Magoshi, J., & Nakamura, S. (1975) · Journal of Applied Polymer Science · doi:10.1002/app.1975.070190410 · Cited by 104
Formation and characterization of Langmuir silk films
Muller, W. S., Samuelson, L. A., Fossey, S. A., & Kaplan, D. L. (1993) · Langmuir · doi:10.1021/la00031a038 · Cited by 59
Self-citation
Cited by
Altman, G. H., Diaz, F., Jakuba, C., Calabro, T., Horan, R. L., Chen, J., Lu, H., Richmond, J., & Kaplan, D. L. (2003) · Biomaterials · doi:10.1016/s0142-9612(02)00353-8 · Cited by 3,458
Self-citationBiological materials: Structure and mechanical properties
Meyers, M. A., Chen, P.-Y., Lin, A. Y.-M., & Seki, Y. (2008) · Progress in Materials Science · doi:10.1016/j.pmatsci.2007.05.002 · Cited by 2,573
Vepari, C., & Kaplan, D. L. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.05.013 · Cited by 2,561
Self-citationNanoconfinement controls stiffness, strength and mechanical toughness of β-sheet crystals in silk
Keten, S., Xu, Z., Ihle, B., & Buehler, M. J. (2010) · Nature Materials · doi:10.1038/nmat2704 · Cited by 1,391
Structures, mechanical properties and applications of silk fibroin materials
Koh, L.-D., Cheng, Y., Teng, C.-P., Khin, Y.-W., Loh, X.-J., Tee, S.-Y., Low, M., Ye, E., Yu, H.-D., Zhang, Y.-W., et al. (2015) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2015.02.001 · Cited by 1,241
Metadata
- Authors
- Cunniff, P. M., Fossey, S. A., Auerbach, M. A., Song, J. W., Kaplan, D. L., Adams, W. W., Eby, R. K., Mahoney, D., & Vezie, D. L.
- Venue
- Polymers for Advanced Technologies
- Publisher
- Wiley
- Published
- 1994-08
- Volume
- 5
- Issue
- 8
- Pages
- 401-410
- ISSN
- 1042-7147 (ISSN-L)
- 1099-1581
- OpenAlex
- W2087347368
- Cited by
- 297
- References
- 9
- FWCI
- 2.01
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.