The DOI matches its Crossref record; 68 of the 68 references it cites were found in a registry or an index.
Recent developments in chemical modification and characterization of natural fiber‐reinforced composites
Abstract
A critical review of the literature on the various aspects of natural fibers and biocomposites with a particular reference to chemical modifications is presented in this paper. A notable disadvantage of natural fibers is their polarity which makes it incompatible with hydrophobic matrix. This incompatibility results in poor interfacial bonding between the fibers and the matrix. This in turn leads to impaired mechanical properties of the composites. This defect can be remedied by chemical modification of fibers so as to make it less hydrophilic. This paper reviews the latest trends in chemical modifications and characterizations of natural fibers. The structure and properties of natural fibers have been discussed. Common chemical modifications and their mechanisms have also been elaborated. The importance of chemical modifications and the resultant enhancement in the properties of the composites have also been reviewed. Recent investigations dealing with chemical modifications of natural fiber‐reinforced composites have also been cited. POLYM. COMPOS., 2008. © 2007 Society of Plastics Engineers
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Composites reinforced with cellulose based fibres
Bledzki, A. (1999) · Progress in Polymer Science · doi:10.1016/s0079-6700(98)00018-5 · Cited by 4,696
Wood: Chemistry, ultrastructure, reactions
(1983) · doi:10.1515/9783110839654 · Cited by 2,846
Surface modifications of natural fibers and performance of the resulting biocomposites: An overview
Mohanty, A. K., Misra, M., & Drzal, L. T. (2001) · Composite Interfaces · doi:10.1163/156855401753255422 · Cited by 1,072
Rong, M. Z., Zhang, M. Q., Liu, Y., Yang, G. C., & Zeng, H. M. (2001) · Composites Science and Technology · doi:10.1016/s0266-3538(01)00046-x · Cited by 1,047
Review: Current international research into cellulosic fibres and composites
Eichhorn, S. J., Baillie, C. A., Zafeiropoulos, N., Mwaikambo, L. Y., Ansell, M. P., Dufresne, A., Entwistle, K. M., Herrera-Franco, P. J., Escamilla, G. C., Groom, L., et al. (2001) · Journal of Materials Science · doi:10.1023/a:1017512029696 · Cited by 943
Properties and modification methods for vegetable fibers for natural fiber composites
Bledzki, A. K., Reihmane, S., & Gassan, J. (1996) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19960222)59:8<1329::aid-app17>3.0.co;2-0 · Cited by 906
A study of the mechanical properties of short natural-fiber reinforced composites
Herrera-Franco, P. J., & Valadez-González, A. (2005) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2005.04.001 · Cited by 905
Biodegradable polymers/bamboo fiber biocomposite with bio-based coupling agent
Lee, S.-H., & Wang, S. (2006) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2005.04.015 · Cited by 822
Mechanical properties of sisal/oil palm hybrid fiber reinforced natural rubber composites
Jacob, M., Thomas, S., & Varughese, K. T. (2004) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00261-6 · Cited by 708
Thwe, M. M., & Liao, K. (2002) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/s1359-835x(01)00071-9 · Cited by 619
Cited by
Microfibrillated cellulose and new nanocomposite materials: a review
Siró, I., & Plackett, D. (2010) · Cellulose · doi:10.1007/s10570-010-9405-y · Cited by 2,883
Chemical treatments on plant-based natural fibre reinforced polymer composites: An overview
Kabir, M. M., Wang, H., Lau, K. T., & Cardona, F. (2012) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2012.04.053 · Cited by 1,851
Green composites from sustainable cellulose nanofibrils: A review
Abdul Khalil, H. P. S., Bhat, A. H., & Ireana Yusra, A. F. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.08.078 · Cited by 1,573
Cellulosic/synthetic fibre reinforced polymer hybrid composites: A review
Jawaid, M., & Abdul Khalil, H. P. S. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.04.043 · Cited by 1,567
Critical review of recent publications on use of natural composites in infrastructure
Dittenber, D. B., & GangaRao, H. V. S. (2012) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2011.11.019 · Cited by 1,515
Kalia, S., Kaith, B. S., & Kaur, I. (2009) · Polymer Engineering & Science · doi:10.1002/pen.21328 · Cited by 1,447
Gholampour, A., & Ozbakkaloglu, T. (2020) · Journal of Materials Science · doi:10.1007/s10853-019-03990-y · Cited by 1,058
Elfaleh, I., Abbassi, F., Habibi, M., Ahmad, F., Guedri, M., Nasri, M., & Garnier, C. (2023) · Results in Engineering · doi:10.1016/j.rineng.2023.101271 · Cited by 1,034
AL-Oqla, F. M., & Sapuan, S. M. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2013.10.050 · Cited by 782
Recent advancements of plant-based natural fiber–reinforced composites and their applications
Li, M., Pu, Y., Thomas, V. M., Yoo, C. G., Ozcan, S., Deng, Y., Nelson, K., & Ragauskas, A. J. (2020) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2020.108254 · Cited by 755
Gandini, A. (2011) · Green Chemistry · doi:10.1039/c0gc00789g · Cited by 695
Ahmad, F., Choi, H. S., & Park, M. K. (2015) · Macromolecular Materials and Engineering · doi:10.1002/mame.201400089 · Cited by 672
Green composites: a review of material attributes and complementary applications
Dicker, M. P. M., Duckworth, P. F., Baker, A. B., Francois, G., Hazzard, M. K., & Weaver, P. M. (2014) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2013.10.014 · Cited by 650
Potential materials for food packaging from nanoclay/natural fibres filled hybrid composites
Majeed, K., Jawaid, M., Hassan, A., Abu Bakar, A., Abdul Khalil, H. P. S., Salema, A. A., & Inuwa, I. (2013) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2012.10.044 · Cited by 617
Graupner, N., Herrmann, A. S., & Müssig, J. (2009) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2009.04.003 · Cited by 608
Additive manufacturing of natural fiber reinforced polymer composites: Processing and prospects
Balla, V. K., Kate, K. H., Satyavolu, J., Singh, P., & Tadimeti, J. G. D. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.106956 · Cited by 580
De Rosa, I. M., Kenny, J. M., Puglia, D., Santulli, C., & Sarasini, F. (2010) · Composites Science and Technology · doi:10.1016/j.compscitech.2009.09.013 · Cited by 576
Shah, D. U. (2013) · Journal of Materials Science · doi:10.1007/s10853-013-7458-7 · Cited by 532
Influence of chemical treatments on mechanical properties of hemp fiber reinforced composites
Sepe, R., Bollino, F., Boccarusso, L., & Caputo, F. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2017.09.030 · Cited by 508
Natural Fiber Reinforced Composites
Fuqua, M. A., Huo, S., & Ulven, C. A. (2012) · Polymer Reviews · doi:10.1080/15583724.2012.705409 · Cited by 488
Nam, T. H., Ogihara, S., Tung, N. H., & Kobayashi, S. (2011) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2011.04.001 · Cited by 462
Effect of cellulose, hemicellulose and lignin contents on pyrolysis and combustion of natural fibers
Dorez, G., Ferry, L., Sonnier, R., Taguet, A., & Lopez-Cuesta, J.-M. (2014) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2014.03.017 · Cited by 442
Challenges and advancement in water absorption of natural fiber-reinforced polymer composites
Mohammed, M., Jawad, A. J. M., Mohammed, A. M., Oleiwi, J. K., Adam, T., Osman, A. F., Dahham, O. S., Betar, B. O., Gopinath, S. C. B., & Jaafar, M. (2023) · Polymer Testing · doi:10.1016/j.polymertesting.2023.108083 · Cited by 418
Fiore, V., Scalici, T., & Valenza, A. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.02.016 · Cited by 417
Effects of chemical treatments on hemp fibre structure
Kabir, M. M., Wang, H., Lau, K. T., & Cardona, F. (2013) · Applied Surface Science · doi:10.1016/j.apsusc.2013.02.086 · Cited by 399
Chemical Composition of Natural Fibers and its Influence on their Mechanical Properties
Komuraiah, A., Kumar, N. S., & Prasad, B. D. (2014) · Mechanics of Composite Materials · doi:10.1007/s11029-014-9422-2 · Cited by 399
Fiore, V., Scalici, T., Nicoletti, F., Vitale, G., Prestipino, M., & Valenza, A. (2016) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2015.09.028 · Cited by 385
Isolation and characterisation of cellulose nanocrystals from sago seed shells
Naduparambath, S., T.V., J., V., S., M.P., S., Balan, A. K., & E., P. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.09.088 · Cited by 373
Characterization of natural fiber and composites – A review
Sathishkumar, T., Navaneethakrishnan, P., Shankar, S., Rajasekar, R., & Rajini, N. (2013) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684413495322 · Cited by 372
Kumar, R., Ul Haq, M. I., Raina, A., & Anand, A. (2019) · International Journal of Sustainable Engineering · doi:10.1080/19397038.2018.1538267 · Cited by 354
Omrani, E., Menezes, P. L., & Rohatgi, P. K. (2016) · Engineering Science and Technology, an International Journal · doi:10.1016/j.jestch.2015.10.007 · Cited by 353
A Review on Natural Fiber Bio-Composites, Surface Modifications and Applications
Zwawi, M. (2021) · Molecules · doi:10.3390/molecules26020404 · Cited by 349
Renewable materials to reduce building heat loss: Characterization of date palm wood
Agoudjil, B., Benchabane, A., Boudenne, A., Ibos, L., & Fois, M. (2011) · Energy and Buildings · doi:10.1016/j.enbuild.2010.10.014 · Cited by 341
Kalia, S., Thakur, K., Celli, A., Kiechel, M. A., & Schauer, C. L. (2013) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2013.04.009 · Cited by 289
N., S., I., R., & T., R. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.04.127 · Cited by 289
Jagadeesh, P., Puttegowda, M., Mavinkere Rangappa, S., & Siengchin, S. (2021) · Polymer Composites · doi:10.1002/pc.26312 · Cited by 281
Comparison of different natural fiber treatments: a literature review
Koohestani, B., Darban, A. K., Mokhtari, P., Yilmaz, E., & Darezereshki, E. (2019) · International Journal of Environmental Science and Technology · doi:10.1007/s13762-018-1890-9 · Cited by 268
Lani, N. S., Ngadi, N., Johari, A., & Jusoh, M. (2014) · Journal of Nanomaterials · doi:10.1155/2014/702538 · Cited by 261
Hemp Fibre Properties and Processing Target Textile: A Review
Zimniewska, M. (2022) · Materials · doi:10.3390/ma15051901 · Cited by 214
Composites of Wood and Biodegradable Thermoplastics: A Review
Chan, C. M., Vandi, L.-J., Pratt, S., Halley, P., Richardson, D., Werker, A., & Laycock, B. (2018) · Polymer Reviews · doi:10.1080/15583724.2017.1380039 · Cited by 207
Lee, C. H., Khalina, A., Lee, S. H., & Liu, M. (2020) · Advances in Materials Science and Engineering · doi:10.1155/2020/6074063 · Cited by 168
Polycaprolactone: Synthesis, Properties, and Applications
Guarino, V., Gentile, G., Sorrentino, L., & Ambrosio, L. (2017) · Encyclopedia of Polymer Science and Technology · doi:10.1002/0471440264.pst658 · Cited by 163
Sair, S., Oushabi, A., Kammouni, A., Tanane, O., Abboud, Y., Oudrhiri Hassani, F., Laachachi, A., & El Bouari, A. (2017) · Case Studies in Thermal Engineering · doi:10.1016/j.csite.2017.10.012 · Cited by 97
Hydration of portland cement pastes containing untreated and treated hemp powders
Guo, A., Sun, Z., Qi, C., & Sathitsuksanoh, N. (2020) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0003209 · Cited by 14
Hemp Fibers in Serbia: Cultivation, Processing and Applications
Pejić, B., Vukčević, M., & Kostić, M. (2020) · Sustainable Agriculture Reviews · doi:10.1007/978-3-030-41384-2_4 · Cited by 6
Metadata
- Authors
- John, M. J., & Anandjiwala, R. D.
- Venue
- Polymer Composites
- Publisher
- Wiley
- Published
- 2007-12-26
- Volume
- 29
- Issue
- 2
- Pages
- 187-207
- ISSN
- 0272-8397 (ISSN-L)
- 1548-0569
- OpenAlex
- W1996890681
- Cited by
- 1,291
- References
- 68
- FWCI
- 13.35
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.