The DOI matches its Crossref record; 42 of the 42 references it cites were found in a registry or an index.
A review on interface modification and characterization of natural fiber reinforced plastic composites
Abstract
An Important aspect with respect to optimal mechanical performance of fiber reinforced composites in general and durability in particular is the optimization of the interfacial bond between fiber and polymer matrix. The quality of the fiber‐matrix interface is significant for the application of natural fibers as reinforcement for plastics. Since the fibers and matrices are chemically different, strong adhesion at their interfaces is needed for an effective transfer of stress and bond distribution throughout an Interface. A good compatibilization between cellulose fibers and non‐polar matrices is achieved from polymeric chains that will favor entanglements and interdiffiusion with the matrix. This article gives a critical review on the physical and chemical treatment methods that improve the fiber‐matrix adhesion and their characterization methods.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Composites reinforced with cellulose based fibres
Bledzki, A. (1999) · Progress in Polymer Science · doi:10.1016/s0079-6700(98)00018-5 · Cited by 4,696
Milner, S. T. (1991) · Science · doi:10.1126/science.251.4996.905 · Cited by 1,821
The nature of adhesion in composites of modified cellulose fibers and polypropylene
Felix, J. M., & Gatenholm, P. (1991) · Journal of Applied Polymer Science · doi:10.1002/app.1991.070420307 · Cited by 773
Joseph, K., Thomas, S., & Pavithran, C. (1996) · Polymer · doi:10.1016/0032-3861(96)00144-9 · Cited by 742
Self-citationOil palm fibers: Morphology, chemical composition, surface modification, and mechanical properties
Sreekala, M. S., Kumaran, M. G., & Thomas, S. (1997) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19971031)66:5<821::aid-app2>3.0.co;2-x · Cited by 492
Self-citationGassan, J., & Bledzki, A. K. (1997) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/s1359-835x(97)00042-0 · Cited by 444
The effect of silane treatment on the mechanical and physical properties of sisal-epoxy composites
Bisanda, E. T. N., & Ansell, M. P. (1991) · Composites Science and Technology · doi:10.1016/0266-3538(91)90026-l · Cited by 438
Mechanical properties of pineapple leaf fiber-reinforced polyester composites
Devi, L. U., Bhagawan, S. S., & Thomas, S. (1997) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19970531)64:9<1739::aid-app10>3.0.co;2-t · Cited by 426
Self-citationAlkali treatment of coir fibres for coir-polyester composites
Prasad, S. V., Pavithran, C., & Rohatgi, P. K. (1983) · Journal of Materials Science · doi:10.1007/bf01111964 · Cited by 352
Mohanty, A. K., Khan, M. A., & Hinrichsen, G. (2000) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/s1359-835x(99)00057-3 · Cited by 319
Cited by
Silane coupling agents used for natural fiber/polymer composites: A review
Xie, Y., Hill, C. A. S., Xiao, Z., Militz, H., & Mai, C. (2010) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.03.005 · Cited by 2,244
Chemical treatments on plant-based natural fibre reinforced polymer composites: An overview
Kabir, M. M., Wang, H., Lau, K. T., & Cardona, F. (2012) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2012.04.053 · Cited by 1,851
Characterization and properties of natural fiber polymer composites: A comprehensive review
Sanjay, M. R., Madhu, P., Jawaid, M., Senthamaraikannan, P., Senthil, S., & Pradeep, S. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.10.101 · Cited by 1,652
Natural-fiber-reinforced polymer composites in automotive applications
Holbery, J., & Houston, D. (2006) · JOM · doi:10.1007/s11837-006-0234-2 · Cited by 1,565
Kalia, S., Kaith, B. S., & Kaur, I. (2009) · Polymer Engineering & Science · doi:10.1002/pen.21328 · Cited by 1,447
Abdul Khalil, H. P. S., Davoudpour, Y., Islam, M. N., Mustapha, A., Sudesh, K., Dungani, R., & Jawaid, M. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.08.069 · Cited by 1,333
Kenaf fiber reinforced composites: A review
Akil, H. M., Omar, M. F., Mazuki, A. A. M., Safiee, S., Ishak, Z. A. M., & Abu Bakar, A. (2011) · Materials & Design · doi:10.1016/j.matdes.2011.04.008 · Cited by 1,274
Green composites: A review of adequate materials for automotive applications
Koronis, G., Silva, A., & Fontul, M. (2013) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2012.07.004 · Cited by 1,198
Gholampour, A., & Ozbakkaloglu, T. (2020) · Journal of Materials Science · doi:10.1007/s10853-019-03990-y · Cited by 1,058
Thyavihalli Girijappa, Y. G., Mavinkere Rangappa, S., Parameswaranpillai, J., & Siengchin, S. (2019) · Frontiers in Materials · doi:10.3389/fmats.2019.00226 · Cited by 1,011
M.R., S., Siengchin, S., Parameswaranpillai, J., Jawaid, M., Pruncu, C. I., & Khan, A. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.11.083 · Cited by 999
Processing and characterization of natural cellulose fibers/thermoset polymer composites
Thakur, V. K., & Thakur, M. K. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.03.039 · Cited by 990
Characterization of natural fiber surfaces and natural fiber composites
Sgriccia, N., Hawley, M. C., & Misra, M. (2008) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2008.07.007 · Cited by 954
A study of the mechanical properties of short natural-fiber reinforced composites
Herrera-Franco, P. J., & Valadez-González, A. (2005) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2005.04.001 · Cited by 905
Cellulosic nanocomposites: a review
(2008) · BioResources · doi:10.15376/biores.3.3.929-980 · Cited by 901
Cellulose-Based Bio- and Nanocomposites: A Review
Kalia, S., Dufresne, A., Cherian, B. M., Kaith, B. S., Avérous, L., Njuguna, J., & Nassiopoulos, E. (2011) · International Journal of Polymer Science · doi:10.1155/2011/837875 · Cited by 896
Espert, A., Vilaplana, F., & Karlsson, S. (2004) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2004.04.004 · Cited by 876
A review of natural fibers used in biocomposites: plant, animal and regenerated cellulose fibers
Ramamoorthy, S. K., Skrifvars, M., & Persson, A. (2015) · Polymer Reviews · doi:10.1080/15583724.2014.971124 · Cited by 801
Materials for Wind Turbine Blades: An Overview
Mishnaevsky, L., Branner, K., Petersen, H., Beauson, J., McGugan, M., & Sørensen, B. (2017) · Materials · doi:10.3390/ma10111285 · Cited by 776
Alternative Monomers Based on Lignocellulose and Their Use for Polymer Production
Delidovich, I., Hausoul, P. J. C., Deng, L., Pfützenreuter, R., Rose, M., & Palkovits, R. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00354 · Cited by 773
ABDELMOULEH, M., BOUFI, S., BELGACEM, M., & DUFRESNE, A. (2007) · Composites Science and Technology · doi:10.1016/j.compscitech.2006.07.003 · Cited by 691
Hemp fiber and its composites – a review
Shahzad, A. (2012) · Journal of Composite Materials · doi:10.1177/0021998311413623 · Cited by 687
A review of bast fibres and their composites. Part 1 – Fibres as reinforcements
Summerscales, J., Dissanayake, N. P. J., Virk, A. S., & Hall, W. (2010) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.06.001 · Cited by 683
A Review on Pineapple Leaves Fibre and Its Composites
Asim, M., Abdan, K., Jawaid, M., Nasir, M., Dashtizadeh, Z., Ishak, M. R., & Hoque, M. E. (2015) · International Journal of Polymer Science · doi:10.1155/2015/950567 · Cited by 634
Krishnamoorthy, M., Hakobyan, S., Ramstedt, M., & Gautrot, J. E. (2014) · Chemical Reviews · doi:10.1021/cr500252u · Cited by 604
Additive manufacturing of natural fiber reinforced polymer composites: Processing and prospects
Balla, V. K., Kate, K. H., Satyavolu, J., Singh, P., & Tadimeti, J. G. D. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.106956 · Cited by 580
A review on new bio-based constituents for natural fiber-polymer composites
Väisänen, T., Das, O., & Tomppo, L. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.02.132 · Cited by 560
Zini, E., & Scandola, M. (2011) · Polymer Composites · doi:10.1002/pc.21224 · Cited by 534
Ng, H.-M., Sin, L. T., Tee, T.-T., Bee, S.-T., Hui, D., Low, C.-Y., & Rahmat, A. R. (2015) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2015.01.008 · Cited by 513
Mechanical properties of polypropylene composites: A review
Shubhra, Q. T., Alam, A., & Quaiyyum, M. (2013) · Journal of Thermoplastic Composite Materials · doi:10.1177/0892705711428659 · Cited by 508
Sustainable Fiber‐Reinforced Composites: A Review
Maiti, S., Islam, M. R., Uddin, M. A., Afroj, S., Eichhorn, S. J., & Karim, N. (2022) · Advanced Sustainable Systems · doi:10.1002/adsu.202200258 · Cited by 493
Väisänen, T., Haapala, A., Lappalainen, R., & Tomppo, L. (2016) · Waste Management · doi:10.1016/j.wasman.2016.04.037 · Cited by 490
Natural Fiber Reinforced Composites
Fuqua, M. A., Huo, S., & Ulven, C. A. (2012) · Polymer Reviews · doi:10.1080/15583724.2012.705409 · Cited by 488
Recent advancement in the natural fiber polymer composites: A comprehensive review
Vigneshwaran, S., Sundarakannan, R., John, K. M., Joel Johnson, R. D., Prasath, K. A., Ajith, S., Arumugaprabu, V., & Uthayakumar, M. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.124109 · Cited by 465
Bismarck, A., Aranberri‐Askargorta, I., Springer, J., Lampke, T., Wielage, B., Stamboulis, A., Shenderovich, I., & Limbach, H. (2002) · Polymer Composites · doi:10.1002/pc.10485 · Cited by 453
A critical review of all-cellulose composites
Huber, T., Müssig, J., Curnow, O., Pang, S., Bickerton, S., & Staiger, M. P. (2012) · Journal of Materials Science · doi:10.1007/s10853-011-5774-3 · Cited by 451
Recent Advances in the Application of Natural Fiber Based Composites
Pandey, J. K., Ahn, S. H., Lee, C. S., Mohanty, A. K., & Misra, M. (2010) · Macromolecular Materials and Engineering · doi:10.1002/mame.201000095 · Cited by 436
Challenges and advancement in water absorption of natural fiber-reinforced polymer composites
Mohammed, M., Jawad, A. J. M., Mohammed, A. M., Oleiwi, J. K., Adam, T., Osman, A. F., Dahham, O. S., Betar, B. O., Gopinath, S. C. B., & Jaafar, M. (2023) · Polymer Testing · doi:10.1016/j.polymertesting.2023.108083 · Cited by 418
Fiore, V., Scalici, T., & Valenza, A. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.02.016 · Cited by 417
Biagiotti, J., Puglia, D., & Kenny, J. M. (2004) · Journal of Natural Fibers · doi:10.1300/j395v01n02_04 · Cited by 412
A Review on Natural Fiber Reinforced Polymer Composite for Bullet Proof and Ballistic Applications
Nurazzi, N. M., Asyraf, M. R. M., Khalina, A., Abdullah, N., Aisyah, H. A., Rafiqah, S. A., Sabaruddin, F. A., Kamarudin, S. H., Norrrahim, M. N. F., Ilyas, R. A., et al. (2021) · Polymers · doi:10.3390/polym13040646 · Cited by 398
Comparison of injection moulded, natural fibre-reinforced composites with PP and PLA as matrices
Mofokeng, J. P., Luyt, A. S., Tábi, T., & Kovács, J. (2012) · Journal of Thermoplastic Composite Materials · doi:10.1177/0892705711423291 · Cited by 391
Kumar, R., Ul Haq, M. I., Raina, A., & Anand, A. (2019) · International Journal of Sustainable Engineering · doi:10.1080/19397038.2018.1538267 · Cited by 354
Arbelaiz, A., Fernández, B., Cantero, G., Llano-Ponte, R., Valea, A., & Mondragon, I. (2005) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2005.03.021 · Cited by 352
Preparation and properties of recycled HDPE/natural fiber composites
Lei, Y., Wu, Q., Yao, F., & Xu, Y. (2007) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2007.02.001 · Cited by 337
Biodegradable plastics from renewable sources
Flieger, M., Kantorová, M., Prell, A., Řezanka, T., & Votruba, J. (2003) · Folia Microbiologica · doi:10.1007/bf02931273 · Cited by 327
Kenaf (Hibiscus cannabinus L.) fibre based bio-materials: A review on processing and properties
Ramesh, M. (2016) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.11.001 · Cited by 321
Chen, J., Wang, K., & Zhao, Y. (2018) · Composites Science and Technology · doi:10.1016/j.compscitech.2017.11.005 · Cited by 296
Hemp as a potential raw material toward a sustainable world: A review
Ahmed, A. T. M. F., Islam, M. Z., Mahmud, M. S., Sarker, M. E., & Islam, M. R. (2022) · Heliyon · doi:10.1016/j.heliyon.2022.e08753 · Cited by 284
Grafting of cellulose by ring-opening polymerisation – A review
Carlmark, A., Larsson, E., & Malmström, E. (2012) · European Polymer Journal · doi:10.1016/j.eurpolymj.2012.06.013 · Cited by 278
Study of the interfacial properties of natural fibre reinforced polyethylene
Torres, F. G., & Cubillas, M. L. (2005) · Polymer Testing · doi:10.1016/j.polymertesting.2005.05.004 · Cited by 275
Studies on durability of sustainable biobased composites: a review
Chang, B. P., Mohanty, A. K., & Misra, M. (2020) · RSC Advances · doi:10.1039/c9ra09554c · Cited by 270
Ilyas, R., Zuhri, M., Norrrahim, M., Misenan, M., Jenol, M., Samsudin, S., Nurazzi, N., Asyraf, M., Supian, A., Bangar, S., et al. (2022) · Polymers · doi:10.3390/polym14010182 · Cited by 268
A review on mechanical behavior of natural fiber reinforced polymer composites and its applications
Jariwala, H., & Jain, P. (2019) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684419828524 · Cited by 258
Processing and Properties of Natural Fiber-Reinforced Polymer Composite
Dhal, J. P., & Mishra, S. C. (2013) · Journal of Materials · doi:10.1155/2013/297213 · Cited by 73
Evaluation and testing of mechanical properties of wood plastic composite
Bhaskar, J., Haq, S., & Yadaw, S. (2012) · Journal of Thermoplastic Composite Materials · doi:10.1177/0892705711406158 · Cited by 39
Metadata
- Authors
- George, J., Sreekala, M. S., & Thomas, S.
- Venue
- Polymer Engineering & Science
- Publisher
- Wiley
- Published
- 2001-09
- Volume
- 41
- Issue
- 9
- Pages
- 1471-1485
- ISSN
- 0032-3888 (ISSN-L)
- 1548-2634
- OpenAlex
- W2022619123
- Cited by
- 1,247
- References
- 42
- FWCI
- 9.56
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.