The DOI matches its Crossref record; 42 of the 42 references it cites were found in a registry or an index.
A review on interface modification and characterization of natural fiber reinforced plastic composites
Abstract
An Important aspect with respect to optimal mechanical performance of fiber reinforced composites in general and durability in particular is the optimization of the interfacial bond between fiber and polymer matrix. The quality of the fiber‐matrix interface is significant for the application of natural fibers as reinforcement for plastics. Since the fibers and matrices are chemically different, strong adhesion at their interfaces is needed for an effective transfer of stress and bond distribution throughout an Interface. A good compatibilization between cellulose fibers and non‐polar matrices is achieved from polymeric chains that will favor entanglements and interdiffiusion with the matrix. This article gives a critical review on the physical and chemical treatment methods that improve the fiber‐matrix adhesion and their characterization methods.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Composites reinforced with cellulose based fibres
Bledzki, A. (1999) · Progress in Polymer Science · doi:10.1016/s0079-6700(98)00018-5 · Cited by 4,696
Milner, S. T. (1991) · Science · doi:10.1126/science.251.4996.905 · Cited by 1,821
The nature of adhesion in composites of modified cellulose fibers and polypropylene
Felix, J. M., & Gatenholm, P. (1991) · Journal of Applied Polymer Science · doi:10.1002/app.1991.070420307 · Cited by 773
Joseph, K., Thomas, S., & Pavithran, C. (1996) · Polymer · doi:10.1016/0032-3861(96)00144-9 · Cited by 742
Self-citationOil palm fibers: Morphology, chemical composition, surface modification, and mechanical properties
Sreekala, M. S., Kumaran, M. G., & Thomas, S. (1997) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19971031)66:5<821::aid-app2>3.0.co;2-x · Cited by 492
Self-citationGassan, J., & Bledzki, A. K. (1997) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/s1359-835x(97)00042-0 · Cited by 444
The effect of silane treatment on the mechanical and physical properties of sisal-epoxy composites
Bisanda, E. T. N., & Ansell, M. P. (1991) · Composites Science and Technology · doi:10.1016/0266-3538(91)90026-l · Cited by 438
Mechanical properties of pineapple leaf fiber-reinforced polyester composites
Devi, L. U., Bhagawan, S. S., & Thomas, S. (1997) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19970531)64:9<1739::aid-app10>3.0.co;2-t · Cited by 426
Self-citationAlkali treatment of coir fibres for coir-polyester composites
Prasad, S. V., Pavithran, C., & Rohatgi, P. K. (1983) · Journal of Materials Science · doi:10.1007/bf01111964 · Cited by 352
Mohanty, A. K., Khan, M. A., & Hinrichsen, G. (2000) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/s1359-835x(99)00057-3 · Cited by 319
Tensile properties of short sisal fiber reinforced polystyrene composites
Nair, K. C. M., Diwan, S. M., & Thomas, S. (1996) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19960531)60:9<1483::aid-app23>3.0.co;2-1 · Cited by 310
Self-citationMaldas, D., Kokta, B. V., & Daneault, C. (1989) · Journal of Applied Polymer Science · doi:10.1002/app.1989.070370313 · Cited by 286
George, J., Bhagawan, S. S., & Thomas, S. (1998) · Composites Science and Technology · doi:10.1016/s0266-3538(97)00161-9 · Cited by 276
Self-citationStudies on Jute Composites—A Literature Review
Mohanty, A. K., & Misra, M. (1995) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559508009599 · Cited by 264
Construction materials based upon biologically renewable resources—from components to finished parts
Herrmann, A. S., Nickel, J., & Riedel, U. (1998) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(97)00169-9 · Cited by 251
Effect of corona modification on the mechanical properties of polypropylene/cellulose composites
Belgacem, M. N., Bataille, P. F., & Sapieha, S. (1994) · Journal of Applied Polymer Science · doi:10.1002/app.1994.070530401 · Cited by 227
Joseph, K., Varghese, S., Kalaprasad, G., et al. (1996) · European Polymer Journal · doi:10.1016/s0014-3057(96)00051-1 · Cited by 224
Zaini, M. J., Fuad, M. Y. A., Ismail, Z., Mansor, M. S., & Mustafah, J. (1996) · Polymer International · doi:10.1002/(sici)1097-0126(199605)40:1<51::aid-pi514>3.0.co;2-i · Cited by 214
Mechanical properties of jute-reinforced plastics
Shah, A., & Lakkad, S. C. (1981) · Fibre Science and Technology · doi:10.1016/0015-0568(81)90030-0 · Cited by 205
The three stages in degradation of polymers—polyethylene as a model substance
Albertsson, A., & Karlsson, S. (1988) · Journal of Applied Polymer Science · doi:10.1002/app.1988.070350515 · Cited by 194
Influence of fiber surface treatment on the properties of sisal‐polyester composites
Singh, B., Gupta, M., & Verma, A. (1996) · Polymer Composites · doi:10.1002/pc.10684 · Cited by 190
Albertsson, A.-C. (1980) · European Polymer Journal · doi:10.1016/0014-3057(80)90100-7 · Cited by 186
George, J., Bhagawan, S. S., & Thomas, S. (1996) · Journal of Thermal Analysis · doi:10.1007/bf01979452 · Cited by 179
Self-citationAlbertsson, A.-C. (1978) · Journal of Applied Polymer Science · doi:10.1002/app.1978.070221207 · Cited by 158
Effect of moisture content on the properties of silanized jute‐epoxy composites
Gassan, J., & Bledzki, A. K. (1997) · Polymer Composites · doi:10.1002/pc.10272 · Cited by 149
Natural fibre-reinforced biopolymers as construction materials - new discoveries
Riedel, U., & Nickel, J. (1999) · Die Angewandte Makromolekulare Chemie · doi:10.1002/(sici)1522-9505(19991201)272:1<34::aid-apmc34>3.0.co;2-h · Cited by 149
Development and Testing of Bamboo-Fibres Reinforced Plastic Composites
Jindal, U. C. (1986) · Journal of Composite Materials · doi:10.1177/002199838602000102 · Cited by 138
Straw-reinforced polyester composites
White, N. M., & Ansell, M. P. (1983) · Journal of Materials Science · doi:10.1007/bf01111977 · Cited by 131
Mechanical properties of flax fibre reinforced epoxy composites
George, J., & Ivens, I. V. J. (1999) · Die Angewandte Makromolekulare Chemie · Cited by 127
Self-citationMicrobial and oxidative effects in degradation of polyethene
Albertsson, A. ‐., & Bánhidi, Z. G. (1980) · Journal of Applied Polymer Science · doi:10.1002/app.1980.070250813 · Cited by 120
Sunhemp fibre-reinforced polyester: Part 1 Analysis of tensile and impact properties
Sanadi, A. R., Prasad, S. V., & Rohatgi, P. K. (1986) · Journal of Materials Science · doi:10.1007/bf01106545 · Cited by 120
Improved interactions in chemically modified pineapple leaf fiber reinforced polyethylene composites
George, J., Bhagawan, S. S., & Thomas, S. (1997) · Composite Interfaces · doi:10.1163/156855498x00153 · Cited by 108
Self-citationCoconut-fiber-reinforced thermosetting plastics
Owolabi, O., Czvikovszky, T., & Kovács, I. A. (1985) · Journal of Applied Polymer Science · doi:10.1002/app.1985.070300504 · Cited by 103
Development and characterization of a HDPE-sand-natural fiber composite
Herrera-Franco, P. J., Valadez-González, A., & Cervantes‐Uc, J. M. (1997) · Composites Part B Engineering · doi:10.1016/s1359-8368(96)00024-8 · Cited by 100
Synthetic polymers and the living environment
Griffin, G. J. L. (1980) · Pure and Applied Chemistry · doi:10.1351/pac198052020399 · Cited by 88
Acetylation of jute: Effects on strength, rot resistance, and hydrophobicity
Andersson, M., & Tillman, A. (1989) · Journal of Applied Polymer Science · doi:10.1002/app.1989.070371214 · Cited by 65
Albertsson, A., Báanhidi, Z. G., & Beyer-Ericsson, L.-L. (1978) · Journal of Applied Polymer Science · doi:10.1002/app.1978.070221208 · Cited by 60
Banana fibre strands reinforced polyester composites
Zhu, W. H., Tobias, B. C., & Coutts, R. S. P. (1995) · Journal of Materials Science Letters · doi:10.1007/bf00665917 · Cited by 53
An ESCA study of chemical reactions on the surfaces of cellulose fibers
Zadorecki, P., & Rönnhult, T. (1986) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.1986.080240417 · Cited by 37
Effect of Chemical Treatment on Mechanical Properties and Moisture Regain of Jute Fibers
Varma, I. K., Krishnan, S. R. A., & Krishnamoorthy, S. (1988) · Textile Research Journal · doi:10.1177/004051758805800908 · Cited by 26
Effect of fiber treatment on mechanical properties of polypropylene‐wood fiber composites
Raj, R., Kokta, B. V., & Daneault, C. (1989) · Makromolekulare Chemie Macromolecular Symposia · doi:10.1002/masy.19890280113 · Cited by 24
Nakashima, T., & Matsuo, M. (1996) · Journal of Macromolecular Science Part B · doi:10.1080/00222349608220401 · Cited by 10
Cited by
Silane coupling agents used for natural fiber/polymer composites: A review
Xie, Y., Hill, C. A. S., Xiao, Z., Militz, H., & Mai, C. (2010) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.03.005 · Cited by 2,244
Chemical treatments on plant-based natural fibre reinforced polymer composites: An overview
Kabir, M. M., Wang, H., Lau, K. T., & Cardona, F. (2012) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2012.04.053 · Cited by 1,851
Characterization and properties of natural fiber polymer composites: A comprehensive review
Sanjay, M. R., Madhu, P., Jawaid, M., Senthamaraikannan, P., Senthil, S., & Pradeep, S. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.10.101 · Cited by 1,652
Natural-fiber-reinforced polymer composites in automotive applications
Holbery, J., & Houston, D. (2006) · JOM · doi:10.1007/s11837-006-0234-2 · Cited by 1,565
Kalia, S., Kaith, B. S., & Kaur, I. (2009) · Polymer Engineering & Science · doi:10.1002/pen.21328 · Cited by 1,447
Metadata
- Authors
- George, J., Sreekala, M. S., & Thomas, S.
- Venue
- Polymer Engineering & Science
- Publisher
- Wiley
- Published
- 2001-09
- Volume
- 41
- Issue
- 9
- Pages
- 1471-1485
- ISSN
- 0032-3888 (ISSN-L)
- 1548-2634
- OpenAlex
- W2022619123
- Cited by
- 1,247
- References
- 42
- FWCI
- 9.56
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.