The DOI matches its Crossref record; 45 of the 45 references it cites were found in a registry or an index.
Polymer toughness and impact resistance
Abstract
This report is a review of the factors that influence the impact resistance of high polymers, with an emphasis on crystalline polymers. The phenomenology of polymeric fracture is examined, including brittle and ductile failure, and the ductile‐brittle transition temperature (DBTT). An in‐depth discussion of the effects of crystalline morphology follows, with special attention given to the influence of spherulite size, fillers, processing conditions, transitions/relaxations, and multilayer coextrusion. Next, rubber phase addition is considered, including mechanisms, morphology, rubber type and particle size, and test conditions. Finally, common impact test methods are surveyed, including pendulum, falling weight, tensile impact, and tensile elongation tests.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Viscoelastic Properties of Polymers
Ferry, J. D., & Myers, H. S. (1961) · Journal of The Electrochemical Society · doi:10.1149/1.2428174 · Cited by 13,487
Mechanical Properties of Solid Polymers: Third Edition
Ward, I. M., & Sweeney, J. (2012) · Wiley eBooks · doi:10.1002/9781119967125 · Cited by 2,084
Phase structure and adhesion in polymer blends: A criterion for rubber toughening
Wu, S. (1985) · Polymer · doi:10.1016/0032-3861(85)90015-1 · Cited by 1,426
KELLER, A. (1962) · Polymer · doi:10.1016/0032-3861(62)90094-0 · Cited by 1,320
Bucknall, C. B. (1977) · Springer eBooks · doi:10.1007/978-94-017-5349-4 · Cited by 1,189
Micromechanics - Overall Properties of Heterogeneous Materials
(1993) · North-Holland Series in Applied Mathematics and Mechanics · doi:10.1016/c2009-0-09128-4 · Cited by 1,002
A Phenomenological Theory of Spherulitic Crystallization
Keith, H. D., & Padden, F. J. (1963) · Journal of Applied Physics · doi:10.1063/1.1702757 · Cited by 876
Toughening mechanisms in elastomer-modified epoxies: Part 1 Mechanical studies
Yee, A. F., & Pearson, R. A. (1986) · Journal of Materials Science · doi:10.1007/bf01114293 · Cited by 857
Toughening mechanisms in elastomer-modified epoxies: Part 3 The effect of cross-link density
Pearson, R. A., & Yee, A. F. (1989) · Journal of Materials Science · doi:10.1007/bf01174528 · Cited by 724
Prediction of polymer properties
(1993) · Choice Reviews Online · doi:10.5860/choice.31-0937 · Cited by 684
Mechanical properties of solid polymers
Treloar, L. R. G. (1972) · Polymer · doi:10.1016/0032-3861(72)90129-2 · Cited by 681
Keith, H. D., & Padden, F. J. (1964) · Journal of Applied Physics · doi:10.1063/1.1713606 · Cited by 641
The interaction of a crack front with a second-phase dispersion
Lange, F. F. (1970) · Philosophical Magazine · doi:10.1080/14786437008221068 · Cited by 538
Hartwig, G. (1994) · Polymer Properties at Room and Cryogenic Temperatures · doi:10.1007/978-1-4757-6213-6_9 · Cited by 516
Microscopic and molecular fundamentals of crazing
Kramer, E. J. (2005) · Advances in Polymer Science · doi:10.1007/bfb0024055 · Cited by 422
Percolation model for brittle-tough transition in nylon/rubber blends
Margolina, A., & Wu, S. (1988) · Polymer · doi:10.1016/0032-3861(88)90108-5 · Cited by 309
(1989) · Advances in Chemistry · doi:10.1021/ba-1989-0222 · Cited by 304
Impact behaviour of nylon-rubber blends: 5. Influence of the mechanical properties of the elastomer
Borggreve, R. J. M., Gaymans, R. J., & Schuijer, J. (1989) · Polymer · doi:10.1016/0032-3861(89)90385-6 · Cited by 215
The effect of spherulite size on the fracture morphology of polypropylene
Way, J. L., Atkinson, J. R., & Nutting, J. (1974) · Journal of Materials Science · doi:10.1007/bf00550954 · Cited by 199
Borggreve, R. J. M., Gaymans, R. J., & Eichenwald, H. M. (1989) · Polymer · doi:10.1016/0032-3861(89)90386-8 · Cited by 182
Intercrystalline links in polyethylene crystallized from the melt
Keith, H. D., Padden, F. J., & Vadimsky, R. G. (1966) · Journal of Polymer Science Part A-2 Polymer Physics · doi:10.1002/pol.1966.160040208 · Cited by 178
Effect of crystallinity on the properties of nylons
Starkweather, H. W., Moore, G. E., Hansen, J. E., Roder, T. M., & Brooks, R. E. (1956) · Journal of Polymer Science · doi:10.1002/pol.1956.120219803 · Cited by 158
Fine structure of acetal resins and its effect on mechanical properties
Hammer, C. F., Koch, T. A., & Whitney, J. F. (1959) · Journal of Applied Polymer Science · doi:10.1002/app.1959.070010207 · Cited by 137
Effect of spherulites on the mechanical properties of nylon 66
Starkweather, H. W., & Brooks, R. E. (1959) · Journal of Applied Polymer Science · doi:10.1002/app.1959.070010214 · Cited by 136
The role of matrix molecular weight in rubber toughened nylon 6 blends: 1. Morphology
Oshinski, A. J., Keskkula, H., & Paul, D. R. (1996) · Polymer · doi:10.1016/0032-3861(96)00373-4 · Cited by 134
Role of slow phase separation in assessing the equilibrium phase behaviour of PC-PMMA blends
Nishimoto, M., Keskkula, H., & Paul, D. R. (1991) · Polymer · doi:10.1016/0032-3861(91)90013-9 · Cited by 122
Oshinski, A. J., Keskkula, H., & Paul, D. R. (1996) · Polymer · doi:10.1016/0032-3861(96)00374-6 · Cited by 109
Viscoelastic behavior of the polycarbonate of bisphenol A
Mercier, J. P., Aklonis, J. J., Litt, M. H., & Tobolsky, A. V. (1965) · Journal of Applied Polymer Science · doi:10.1002/app.1965.070090206 · Cited by 108
The effect of rubber particle size on the impact properties of high impact polystyrene (HIPS) blends
Hobbs, S. Y. (1986) · Polymer Engineering and Science · doi:10.1002/pen.760260112 · Cited by 106
A correlation between critical tensile strength and polymer cross-sectional area
Vincent, P. I. (1972) · Polymer · doi:10.1016/0032-3861(72)90116-4 · Cited by 102
Cho, K., Yang, J., & Park, C. E. (1998) · Polymer · doi:10.1016/s0032-3861(97)10036-2 · Cited by 82
Analysis of crack propagation in isotactic polypropylene with different morphology
FRIEDRICH, K. (2008) · Steinkopff eBooks · doi:10.1007/bfb0117509 · Cited by 77
The effect of crystallinity on the properties of injection moulded polypropylene and polyacetal
Wright, D. G. M., Dunk, R., Bouvart, D., & Autran, M. (1988) · Polymer · doi:10.1016/0032-3861(88)90134-6 · Cited by 76
The effect of strain rate on the toughening mechanisms of rubber‐modified plastics
Maxwell, M. A., & Yee, A. F. (1981) · Polymer Engineering and Science · doi:10.1002/pen.760210405 · Cited by 74
Relationship between impact strength and spherulite growth in linear polyethylene
Ohlberg, S. M., Roth, J., & Raff, R. A. V. (1959) · Journal of Applied Polymer Science · doi:10.1002/app.1959.070010118 · Cited by 60
Morphological origin of toughness in polyethylene-nylon-6 blends
Armat, R., & Moet, A. (1993) · Polymer · doi:10.1016/0032-3861(93)90217-x · Cited by 59
Effect of elastomer functionality on toughened PET
Tanrattanakul, V., Hiltner, A., Baer, E., Perkins, W. G., Massey, F. L., & Moet, A. (1997) · Polymer · doi:10.1016/s0032-3861(96)00991-3 · Cited by 56
Self-citationMolecular aspects of high polymer fracture as investigated by ESR-technique
Kausch, H. H., & DeVries, K. L. (1975) · International Journal of Fracture · doi:10.1007/bf00012894 · Cited by 53
High-impact-strength poly(ethylene terephthalate) (PET) from virgin and recycled resins
Abu‐Isa, I. A., Jaynes, C. B., & O’Gara, J. F. (1996) · Journal of Applied Polymer Science · Cited by 51
The fracture toughness and fatigue crack propagation behaviour of annealed PET
Pecorini, T. J., & Hertzberg, R. W. (1993) · Polymer · doi:10.1016/0032-3861(93)90248-9 · Cited by 42
Cho, K., Lee, M. S., & Park, C. E. (1998) · Polymer · doi:10.1016/s0032-3861(97)00410-2 · Cited by 40
Particle cavitation in rubber-toughened PMMA: experimental testing of the energy-balance criterion
Ayre, D., & Bucknall, C. B. (1998) · Polymer · doi:10.1016/s0032-3861(97)10253-1 · Cited by 37
Effect of Spherulites on Physical Properties of Fluorothene
Reding, F. P., & Brown, A. (1954) · Industrial & Engineering Chemistry · doi:10.1021/ie50537a054 · Cited by 35
Three-dimensional interaction of crazes and micro-shearbands in PC-SAN microlayer composites
Sung, K., Hiltner, A., & Baer, E. (1994) · Journal of Materials Science · doi:10.1007/bf00349947 · Cited by 26
Fracture resistance in rubber‐toughened polymers
Bucknall, C. B. (1990) · Makromolekulare Chemie Macromolecular Symposia · doi:10.1002/masy.19900380102 · Cited by 15
Cited by
Nagarajan, V., Mohanty, A. K., & Misra, M. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b00321 · Cited by 926
Improving the impact strength of Poly(lactic acid) (PLA) in fused layer modeling (FLM)
Wang, L., Gramlich, W. M., & Gardner, D. J. (2017) · Polymer · doi:10.1016/j.polymer.2017.03.011 · Cited by 310
Bai, H., Huang, C., Xiu, H., Gao, Y., Zhang, Q., & Fu, Q. (2013) · Polymer · doi:10.1016/j.polymer.2013.07.051 · Cited by 153
Super Toughened Poly(lactic acid)-Based Ternary Blends via Enhancing Interfacial Compatibility
Wu, F., Misra, M., & Mohanty, A. K. (2019) · ACS Omega · doi:10.1021/acsomega.8b02587 · Cited by 79
Horák, Z., Fortelný, I., Kolařík, J., Hlavatá, D., & Sikora, A. (2005) · Encyclopedia of Polymer Science and Technology · doi:10.1002/0471440264.pst276 · Cited by 12
Metadata
- Authors
- Perkins, W. G.
- Venue
- Polymer Engineering & Science
- Publisher
- Wiley
- Published
- 1999-12
- Volume
- 39
- Issue
- 12
- Pages
- 2445-2460
- ISSN
- 0032-3888 (ISSN-L)
- 1548-2634
- OpenAlex
- W2024086839
- Cited by
- 296
- References
- 45
- FWCI
- 2.63
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.