The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Toughening modification of PLLA/PBS blends via in situ compatibilization
Abstract
Biodegradable polymer blends consisting of poly(L‐lactic acid) (PLLA) and poly(butylene succinate) (PBS) were prepared in the presence of dicumyl peroxide (DCP). The effects of DCP content on the mechanical properties, thermal and rheological behavior, phase morphology as well as the toughening mechanism of the blends were investigated. The notched Izod impact strength of PLLA/PBS (80/20) blend significantly increased after the addition of 0.05–0.2 phr DCP, but the strength and modulus monotonically decreased with increasing DCP content. PBS acted as a nucleating agent at the environmental temperature below its melting temperature and accelerated the crystallization rate of PLLA but had little effect on its final degree of crystallinity. The degree of crystallinity of PBS and the cold crystallization ability of PLLA gradually reduced with increasing DCP content. The addition of DCP induced an increase in viscosity of the blends at low frequencies as well as finer dispersion of PBS particles and better interfacial adhesion between PLLA and PBS, indicating the in situ compatibilization occurred between the two components. The optical clarity of PLLA/PBS blends was significantly improved after the addition of DCP, which was in accordance with the crystallization behavior and phase structure of the blends. POLYM. ENG. SCI., 2009. © 2008 Society of Plastics Engineers
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
An Overview of Polylactides as Packaging Materials
Auras, R., Harte, B., & Selke, S. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200400043 · Cited by 3,454
Poly(lactic acid): plasticization and properties of biodegradable multiphase systems
Martin, O., & Avérous, L. (2001) · Polymer · doi:10.1016/s0032-3861(01)00086-6 · Cited by 1,562
Large-scale production, properties and commercial applications of polylactic acid polymers
Lunt, J. (1998) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(97)00148-1 · Cited by 1,366
Study of Biodegradable Polylactide/Poly(butylene adipate-co-terephthalate) Blends
Jiang, L., Wolcott, M. P., & Zhang, J. (2006) · Biomacromolecules · doi:10.1021/bm050581q · Cited by 954
Strategies for compatibilization of polymer blends
Koning, C. (1998) · Progress in Polymer Science · doi:10.1016/s0079-6700(97)00054-3 · Cited by 881
Fujimaki, T. (1998) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(97)00220-6 · Cited by 664
Biodegradable materials of poly(l-lactic acid): 1. Melt-spun and solution-spun fibres
Eling, B., Gogolewski, S., & Pennings, A. J. (1982) · Polymer · doi:10.1016/0032-3861(82)90176-8 · Cited by 607
Plasticizing polylactide—the effect of different plasticizers on the mechanical properties
Jacobsen, S., & Fritz, H. G. (1999) · Polymer Engineering & Science · doi:10.1002/pen.11517 · Cited by 540
Citrate esters as plasticizers for poly(lactic acid)
Labrecque, L. V., Kumar, R. A., Dav�, V., Gross, R. A., & McCarthy, S. P. (1997) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19971121)66:8<1507::aid-app11>3.0.co;2-0 · Cited by 466
Structure and mechanical properties of poly(?,?-lactic acid)/poly(ɛ-caprolactone) blends
Broz, M. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00314-4 · Cited by 388
Shibata, M., Inoue, Y., & Miyoshi, M. (2006) · Polymer · doi:10.1016/j.polymer.2006.03.065 · Cited by 375
Toughening of Polylactide by Melt Blending with a Biodegradable Poly(ether)urethane Elastomer
Li, Y., & Shimizu, H. (2007) · Macromolecular Bioscience · doi:10.1002/mabi.200700027 · Cited by 371
Reactive compatibilization of biodegradable blends of poly(lactic acid) and poly(ε-caprolactone)
Wang, L., Ma, W., Gross, R. A., & McCarthy, S. P. (1998) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(97)00196-1 · Cited by 339
Dell'Erba, R., Groeninckx, G., Maglio, G., Malinconico, M., & Migliozzi, A. (2001) · Polymer · doi:10.1016/s0032-3861(01)00269-5 · Cited by 318
The effect of crosslinking on the mechanical properties of polylactic acid/polycaprolactone blends
Semba, T., Kitagawa, K., Ishiaku, U. S., & Hamada, H. (2006) · Journal of Applied Polymer Science · doi:10.1002/app.23589 · Cited by 315
Crystallization, morphology, and mechanical behavior of polylactide/poly(ε‐caprolactone) blends
López‐Rodríguez, N., López‐Arraiza, A., Meaurio, E., & Sarasua, J. R. (2006) · Polymer Engineering & Science · doi:10.1002/pen.20609 · Cited by 289
Harada, M., Ohya, T., Iida, K., Hayashi, H., Hirano, K., & Fukuda, H. (2007) · Journal of Applied Polymer Science · doi:10.1002/app.26717 · Cited by 254
Phase behavior and morphology in blends of poly(L‐lactic acid) and poly(butylene succinate)
Park, J. W., & Im, S. S. (2002) · Journal of Applied Polymer Science · doi:10.1002/app.10923 · Cited by 240
Chen, G.-X., Kim, H.-S., Kim, E.-S., & Yoon, J.-S. (2005) · Polymer · doi:10.1016/j.polymer.2005.10.056 · Cited by 221
Na, Y.-H., He, Y., Shuai, X., Kikkawa, Y., Doi, Y., & Inoue, Y. (2002) · Biomacromolecules · doi:10.1021/bm020050r · Cited by 219
Study of Hydrogen-Bonded Blend of Polylactide with Biodegradable Hyperbranched Poly(ester amide)
Lin, Y., Zhang, K.-Y., Dong, Z.-M., Dong, L.-S., & Li, Y.-S. (2007) · Macromolecules · doi:10.1021/ma070989a · Cited by 218
Ahn, B. D., Kim, S. H., Kim, Y. H., & Yang, J. S. (2001) · Journal of Applied Polymer Science · doi:10.1002/app.2135 · Cited by 216
Compatibilized poly(-caprolactone)/poly(L-lactide) blends for biomedical uses
Maglio, G., Migliozzi, A., Palumbo, R., Immirzi, B., & Volpe, M. G. (1999) · Macromolecular Rapid Communications · doi:10.1002/(sici)1521-3927(19990401)20:4<236::aid-marc236>3.0.co;2-v · Cited by 112
Chen, G., Kim, H., Shim, J.-H., & Yoon, J. (2005) · Macromolecules · doi:10.1021/ma0488515 · Cited by 108
Gao, Y., Kong, L., Zhang, L., Gong, Y., Chen, G., Zhao, N., & Zhang, X. (2005) · European Polymer Journal · doi:10.1016/j.eurpolymj.2005.09.028 · Cited by 101
Shibata, M., Teramoto, N., & Inoue, Y. (2007) · Polymer · doi:10.1016/j.polymer.2007.02.065 · Cited by 100
Maglio, G., Malinconico, M., Migliozzi, A., & Groeninckx, G. (2004) · Macromolecular Chemistry and Physics · doi:10.1002/macp.200300150 · Cited by 91
Kim, D. W., Kim, W. S., Lee, D. H., Min, K. E., Park, L. S., Kang, I., Jeon, I., & Seo, K. H. (2001) · Journal of Applied Polymer Science · doi:10.1002/app.1534 · Cited by 78
Hasook, A., Tanoue, S., Iemoto, Y., & Unryu, T. (2006) · Polymer Engineering and Science · doi:10.1002/pen.20579 · Cited by 72
Broström, J., Boss, A., & Chronakis, I. S. (2004) · Biomacromolecules · doi:10.1021/bm049920q · Cited by 68
Morphology and properties of blends with different thermoplastic polyurethanes and polyolefines
P�tschke, P., Wallheinke, K., Fritsche, H., & Stütz, H. (1997) · Journal of Applied Polymer Science · Cited by 67
Semba, T., Kitagawa, K., Ishiaku, U. S., Kotaki, M., & Hamada, H. (2006) · Journal of Applied Polymer Science · doi:10.1002/app.25311 · Cited by 59
Improvement of Processability of PCL and PBS Blend by Irradiation and its Biodegradability
Nugroho, P., Mitomo, H., Yoshii, F., Kume, T., & Nishimura, K. J. (2001) · Macromolecular Materials and Engineering · doi:10.1002/1439-2054(20010501)286:5<316::aid-mame316>3.0.co;2-n · Cited by 41
Lorenzo, M. L. D., Pietra, P. L., Errico, M. E., et al. (2007) · Polymer Engineering and Science · doi:10.1002/pen.20711 · Cited by 37
Nam, P. H., Ninomiya, N., Fujimori, A., & Masuko, T. (2005) · Polymer Engineering and Science · doi:10.1002/pen.20436 · Cited by 31
Scaffaro, R., Mistretta, M. C., Mantia, F. P. L., Gleria, M., Bertani, R., Samperi, F., & Puglisi, C. (2006) · Macromolecular Chemistry and Physics · doi:10.1002/macp.200600332 · Cited by 29
Cited by
Poly(lactic acid)—Mass production, processing, industrial applications, and end of life
Castro-Aguirre, E., Iñiguez-Franco, F., Samsudin, H., Fang, X., & Auras, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.03.010 · Cited by 1,329
Poly (lactic acid) blends: Processing, properties and applications
Nofar, M., Sacligil, D., Carreau, P. J., Kamal, M. R., & Heuzey, M.-C. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.12.002 · Cited by 780
Poly(butylene succinate) and its copolymers: Research, development and industrialization
Xu, J., & Guo, B. (2010) · Biotechnology Journal · doi:10.1002/biot.201000136 · Cited by 778
Research progress in toughening modification of poly(lactic acid)
Liu, H., & Zhang, J. (2011) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.22283 · Cited by 767
Super tough poly(lactic acid) blends: a comprehensive review
Zhao, X., Hu, H., Wang, X., Yu, X., Zhou, W., & Peng, S. (2020) · RSC Advances · doi:10.1039/d0ra01801e · Cited by 465
Metadata
- Authors
- Wang, R., Wang, S., Zhang, Y., Wan, C., & Ma, P.
- Venue
- Polymer Engineering & Science
- Publisher
- Wiley
- Published
- 2008-10-22
- Volume
- 49
- Issue
- 1
- Pages
- 26-33
- ISSN
- 0032-3888 (ISSN-L)
- 1548-2634
- OpenAlex
- W1974746244
- Cited by
- 266
- References
- 36
- FWCI
- 5.18
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.