The DOI matches its Crossref record; 88 of the 88 references it cites were found in a registry or an index.
Pretreatments of natural fibers and their application as reinforcing material in polymer composites—A review
Abstract
In recent years, natural fibers reinforced composites have received much attention because of their lightweight, nonabrasive, combustible, nontoxic, low cost and biodegradable properties. Among the various natural fibers; flax, bamboo, sisal, hemp, ramie, jute, and wood fibers are of particular interest. A lot of research work has been performed all over the world on the use of natural fibers as a reinforcing material for the preparation of various types of composites. However, lack of good interfacial adhesion, low melting point, and poor resistance towards moisture make the use of natural fiber reinforced composites less attractive. Pretreatments of the natural fiber can clean the fiber surface, chemically modify the surface, stop the moisture absorption process, and increase the surface roughness. Among the various pretreatment techniques, graft copolymerization and plasma treatment are the best methods for surface modification of natural fibers. Graft copolymers of natural fibers with vinyl monomers provide better adhesion between matrix and fiber. In the present article, the use of pretreated natural fibers in polymer matrix‐based composites has been reviewed. Effect of surface modification of natural fibers on the properties of fibers and fiber reinforced polymer composites has also been discussed. POLYM. ENG. SCI., 2009. © 2009 Society of Plastics Engineers
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Composites reinforced with cellulose based fibres
Bledzki, A. (1999) · Progress in Polymer Science · doi:10.1016/s0079-6700(98)00018-5 · Cited by 4,696
Mechanical Properties of Polymers and Composites
Landel, R. F., & Nielsen, L. E. (1993) · CRC Press eBooks · doi:10.1201/b16929 · Cited by 3,666
Chemical Treatments of Natural Fiber for Use in Natural Fiber-Reinforced Composites: A Review
Li, X., Tabil, L. G., & Panigrahi, S. (2007) · Journal of Polymers and the Environment · doi:10.1007/s10924-006-0042-3 · Cited by 2,921
Natural fibres: Can they replace glass in fibre reinforced plastics?
Wambua, P., Ivens, J., & Verpoest, I. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00096-4 · Cited by 2,676
Natural fiber polymer composites: A review
Saheb, D. N., & Jog, J. P. (1999) · Advances in Polymer Technology · doi:10.1002/(sici)1098-2329(199924)18:4<351::aid-adv6>3.0.co;2-x · Cited by 2,429
Are natural fiber composites environmentally superior to glass fiber reinforced composites?
Joshi, S. V., Drzal, L. T., Mohanty, A. K., & Arora, S. (2004) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2003.09.016 · Cited by 2,335
John, M. J., & Anandjiwala, R. D. (2008) · Polymer Composites · doi:10.1002/pc.20461 · Cited by 1,291
George, J., Sreekala, M. S., & Thomas, S. (2001) · Polymer Engineering & Science · doi:10.1002/pen.10846 · Cited by 1,247
Surface modifications of natural fibers and performance of the resulting biocomposites: An overview
Mohanty, A. K., Misra, M., & Drzal, L. T. (2001) · Composite Interfaces · doi:10.1163/156855401753255422 · Cited by 1,072
Analysis of the flax fibres tensile behaviour and analysis of the tensile stiffness increase
Baley, C. (2002) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/s1359-835x(02)00040-4 · Cited by 1,066
Cited by
Chemical treatments on plant-based natural fibre reinforced polymer composites: An overview
Kabir, M. M., Wang, H., Lau, K. T., & Cardona, F. (2012) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2012.04.053 · Cited by 1,851
Cellulosic/synthetic fibre reinforced polymer hybrid composites: A review
Jawaid, M., & Abdul Khalil, H. P. S. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.04.043 · Cited by 1,567
Gurunathan, T., Mohanty, S., & Nayak, S. K. (2015) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.06.007 · Cited by 1,362
Abdul Khalil, H. P. S., Davoudpour, Y., Islam, M. N., Mustapha, A., Sudesh, K., Dungani, R., & Jawaid, M. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.08.069 · Cited by 1,333
Green composites: A brief review
La Mantia, F. P., & Morreale, M. (2011) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2011.01.017 · Cited by 1,125
Elfaleh, I., Abbassi, F., Habibi, M., Ahmad, F., Guedri, M., Nasri, M., & Garnier, C. (2023) · Results in Engineering · doi:10.1016/j.rineng.2023.101271 · Cited by 1,034
Cellulose-Based Bio- and Nanocomposites: A Review
Kalia, S., Dufresne, A., Cherian, B. M., Kaith, B. S., Avérous, L., Njuguna, J., & Nassiopoulos, E. (2011) · International Journal of Polymer Science · doi:10.1155/2011/837875 · Cited by 896
Self-citationA Review on Potentiality of Nano Filler/Natural Fiber Filled Polymer Hybrid Composites
Saba, N., Tahir, P., & Jawaid, M. (2014) · Polymers · doi:10.3390/polym6082247 · Cited by 739
A review of bast fibres and their composites. Part 1 – Fibres as reinforcements
Summerscales, J., Dissanayake, N. P. J., Virk, A. S., & Hall, W. (2010) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.06.001 · Cited by 683
Ahmad, F., Choi, H. S., & Park, M. K. (2015) · Macromolecular Materials and Engineering · doi:10.1002/mame.201400089 · Cited by 672
Green composites: a review of material attributes and complementary applications
Dicker, M. P. M., Duckworth, P. F., Baker, A. B., Francois, G., Hazzard, M. K., & Weaver, P. M. (2014) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2013.10.014 · Cited by 650
Yan, L., Kasal, B., & Huang, L. (2016) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2016.02.002 · Cited by 635
A Review on Pineapple Leaves Fibre and Its Composites
Asim, M., Abdan, K., Jawaid, M., Nasir, M., Dashtizadeh, Z., Ishak, M. R., & Hoque, M. E. (2015) · International Journal of Polymer Science · doi:10.1155/2015/950567 · Cited by 634
Review on the physicochemical treatments of rice husk for production of advanced materials
Soltani, N., Bahrami, A., Pech-Canul, M. I., & González, L. A. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.11.056 · Cited by 629
Potential materials for food packaging from nanoclay/natural fibres filled hybrid composites
Majeed, K., Jawaid, M., Hassan, A., Abu Bakar, A., Abdul Khalil, H. P. S., Salema, A. A., & Inuwa, I. (2013) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2012.10.044 · Cited by 617
Zini, E., & Scandola, M. (2011) · Polymer Composites · doi:10.1002/pc.21224 · Cited by 534
Shah, D. U. (2013) · Journal of Materials Science · doi:10.1007/s10853-013-7458-7 · Cited by 532
“Smart” Materials Based on Cellulose: A Review of the Preparations, Properties, and Applications
Qiu, X., & Hu, S. (2013) · Materials · doi:10.3390/ma6030738 · Cited by 509
Rajinipriya, M., Nagalakshmaiah, M., Robert, M., & Elkoun, S. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b03437 · Cited by 505
Natural Fiber Reinforced Composites
Fuqua, M. A., Huo, S., & Ulven, C. A. (2012) · Polymer Reviews · doi:10.1080/15583724.2012.705409 · Cited by 488
Recent advancement in the natural fiber polymer composites: A comprehensive review
Vigneshwaran, S., Sundarakannan, R., John, K. M., Joel Johnson, R. D., Prasath, K. A., Ajith, S., Arumugaprabu, V., & Uthayakumar, M. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.124109 · Cited by 465
Polymer matrix-natural fiber composites: An overview
Yashas Gowda, T. G., Sanjay, M. R., Subrahmanya Bhat, K., Madhu, P., Senthamaraikannan, P., & Yogesha, B. (2018) · Cogent Engineering · doi:10.1080/23311916.2018.1446667 · Cited by 429
Challenges and advancement in water absorption of natural fiber-reinforced polymer composites
Mohammed, M., Jawad, A. J. M., Mohammed, A. M., Oleiwi, J. K., Adam, T., Osman, A. F., Dahham, O. S., Betar, B. O., Gopinath, S. C. B., & Jaafar, M. (2023) · Polymer Testing · doi:10.1016/j.polymertesting.2023.108083 · Cited by 418
Fiore, V., Scalici, T., & Valenza, A. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.02.016 · Cited by 417
Choo, K., Ching, Y., Chuah, C., Julai, S., & Liou, N.-S. (2016) · Materials · doi:10.3390/ma9080644 · Cited by 404
A Review on Natural Fiber Reinforced Polymer Composite for Bullet Proof and Ballistic Applications
Nurazzi, N. M., Asyraf, M. R. M., Khalina, A., Abdullah, N., Aisyah, H. A., Rafiqah, S. A., Sabaruddin, F. A., Kamarudin, S. H., Norrrahim, M. N. F., Ilyas, R. A., et al. (2021) · Polymers · doi:10.3390/polym13040646 · Cited by 398
Fiore, V., Scalici, T., Nicoletti, F., Vitale, G., Prestipino, M., & Valenza, A. (2016) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2015.09.028 · Cited by 385
Eco-friendly polymer composites for green packaging: Future vision and challenges
Moustafa, H., Youssef, A. M., Darwish, N. A., & Abou-Kandil, A. I. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.05.048 · Cited by 381
Isolation and characterization of cellulose nanofibrils from Helicteres isora plant
Chirayil, C. J., Joy, J., Mathew, L., Mozetic, M., Koetz, J., & Thomas, S. (2014) · Industrial Crops and Products · doi:10.1016/j.indcrop.2014.04.020 · Cited by 373
Mohammed, M., Rahman, R., Mohammed, A. M., Adam, T., Betar, B. O., Osman, A. F., & Dahham, O. S. (2022) · Polymer Testing · doi:10.1016/j.polymertesting.2022.107707 · Cited by 351
A Review on Natural Fiber Bio-Composites, Surface Modifications and Applications
Zwawi, M. (2021) · Molecules · doi:10.3390/molecules26020404 · Cited by 349
Shanmugam, D., & Thiruchitrambalam, M. (2013) · Materials & Design · doi:10.1016/j.matdes.2013.03.048 · Cited by 339
Kenaf (Hibiscus cannabinus L.) fibre based bio-materials: A review on processing and properties
Ramesh, M. (2016) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.11.001 · Cited by 321
Hemp fiber reinforced polypropylene composites: The effects of material treatments
Sullins, T., Pillay, S., Komus, A., & Ning, H. (2017) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2017.02.001 · Cited by 291
Can flax replace E-glass in structural composites? A small wind turbine blade case study
Shah, D. U., Schubel, P. J., & Clifford, M. J. (2013) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2013.04.027 · Cited by 290
Kalia, S., Thakur, K., Celli, A., Kiechel, M. A., & Schauer, C. L. (2013) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2013.04.009 · Cited by 289
Self-citationLatif, R., Wakeel, S., Zaman Khan, N., Noor Siddiquee, A., Lal Verma, S., & Akhtar Khan, Z. (2019) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684418802022 · Cited by 282
Jagadeesh, P., Puttegowda, M., Mavinkere Rangappa, S., & Siengchin, S. (2021) · Polymer Composites · doi:10.1002/pc.26312 · Cited by 281
Lefatshe, K., Muiva, C. M., & Kebaabetswe, L. P. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.02.020 · Cited by 280
Palaganas, N. B., Mangadlao, J. D., de Leon, A. C. C., Palaganas, J. O., Pangilinan, K. D., Lee, Y. J., & Advincula, R. C. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b09223 · Cited by 279
Studies on durability of sustainable biobased composites: a review
Chang, B. P., Mohanty, A. K., & Misra, M. (2020) · RSC Advances · doi:10.1039/c9ra09554c · Cited by 270
Antibacterial properties of hemp and other natural fibre plants: a review.
Khan, B. A., Warner, P., & Wang, H. (2014) · BioResources · doi:10.15376/biores.9.2.3642-3659 · Cited by 118
Sair, S., Oushabi, A., Kammouni, A., Tanane, O., Abboud, Y., Oudrhiri Hassani, F., Laachachi, A., & El Bouari, A. (2017) · Case Studies in Thermal Engineering · doi:10.1016/j.csite.2017.10.012 · Cited by 97
Algae as a Source of Microcrystalline Cellulose
Samiee, S., Ahmadzadeh, H., Hosseini, M., & Lyon, S. (2019) · Advanced Bioprocessing for Alternative Fuels, Biobased Chemicals, and Bioproducts · doi:10.1016/b978-0-12-817941-3.00017-6 · Cited by 29
Hemp Fibers in Serbia: Cultivation, Processing and Applications
Pejić, B., Vukčević, M., & Kostić, M. (2020) · Sustainable Agriculture Reviews · doi:10.1007/978-3-030-41384-2_4 · Cited by 6
Metadata
- Authors
- Kalia, S., Kaith, B. S., & Kaur, I.
- Venue
- Polymer Engineering & Science
- Publisher
- Wiley
- Published
- 2009-03-12
- Volume
- 49
- Issue
- 7
- Pages
- 1253-1272
- ISSN
- 0032-3888 (ISSN-L)
- 1548-2634
- OpenAlex
- W2009388318
- Cited by
- 1,447
- References
- 88
- FWCI
- 35.96
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.