The DOI matches its Crossref record; 88 of the 88 references it cites were found in a registry or an index.
Pretreatments of natural fibers and their application as reinforcing material in polymer composites—A review
Abstract
In recent years, natural fibers reinforced composites have received much attention because of their lightweight, nonabrasive, combustible, nontoxic, low cost and biodegradable properties. Among the various natural fibers; flax, bamboo, sisal, hemp, ramie, jute, and wood fibers are of particular interest. A lot of research work has been performed all over the world on the use of natural fibers as a reinforcing material for the preparation of various types of composites. However, lack of good interfacial adhesion, low melting point, and poor resistance towards moisture make the use of natural fiber reinforced composites less attractive. Pretreatments of the natural fiber can clean the fiber surface, chemically modify the surface, stop the moisture absorption process, and increase the surface roughness. Among the various pretreatment techniques, graft copolymerization and plasma treatment are the best methods for surface modification of natural fibers. Graft copolymers of natural fibers with vinyl monomers provide better adhesion between matrix and fiber. In the present article, the use of pretreated natural fibers in polymer matrix‐based composites has been reviewed. Effect of surface modification of natural fibers on the properties of fibers and fiber reinforced polymer composites has also been discussed. POLYM. ENG. SCI., 2009. © 2009 Society of Plastics Engineers
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Composites reinforced with cellulose based fibres
Bledzki, A. (1999) · Progress in Polymer Science · doi:10.1016/s0079-6700(98)00018-5 · Cited by 4,696
Mechanical Properties of Polymers and Composites
Landel, R. F., & Nielsen, L. E. (1993) · CRC Press eBooks · doi:10.1201/b16929 · Cited by 3,666
Chemical Treatments of Natural Fiber for Use in Natural Fiber-Reinforced Composites: A Review
Li, X., Tabil, L. G., & Panigrahi, S. (2007) · Journal of Polymers and the Environment · doi:10.1007/s10924-006-0042-3 · Cited by 2,921
Natural fibres: Can they replace glass in fibre reinforced plastics?
Wambua, P., Ivens, J., & Verpoest, I. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00096-4 · Cited by 2,676
Natural fiber polymer composites: A review
Saheb, D. N., & Jog, J. P. (1999) · Advances in Polymer Technology · doi:10.1002/(sici)1098-2329(199924)18:4<351::aid-adv6>3.0.co;2-x · Cited by 2,429
Are natural fiber composites environmentally superior to glass fiber reinforced composites?
Joshi, S. V., Drzal, L. T., Mohanty, A. K., & Arora, S. (2004) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2003.09.016 · Cited by 2,335
John, M. J., & Anandjiwala, R. D. (2008) · Polymer Composites · doi:10.1002/pc.20461 · Cited by 1,291
George, J., Sreekala, M. S., & Thomas, S. (2001) · Polymer Engineering & Science · doi:10.1002/pen.10846 · Cited by 1,247
Surface modifications of natural fibers and performance of the resulting biocomposites: An overview
Mohanty, A. K., Misra, M., & Drzal, L. T. (2001) · Composite Interfaces · doi:10.1163/156855401753255422 · Cited by 1,072
Analysis of the flax fibres tensile behaviour and analysis of the tensile stiffness increase
Baley, C. (2002) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/s1359-835x(02)00040-4 · Cited by 1,066
Rong, M. Z., Zhang, M. Q., Liu, Y., Yang, G. C., & Zeng, H. M. (2001) · Composites Science and Technology · doi:10.1016/s0266-3538(01)00046-x · Cited by 1,047
Roy, R., Leamy, H. J., White, C. W., Kaufmann, E. N., Schwoebel, R. L., Taylor, K. C., & Northrup, C. J. (1984) · Physics Today · doi:10.1063/1.2916117 · Cited by 1,010
Properties and modification methods for vegetable fibers for natural fiber composites
Bledzki, A. K., Reihmane, S., & Gassan, J. (1996) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19960222)59:8<1329::aid-app17>3.0.co;2-0 · Cited by 906
Studies on mechanical performance of biofibre/glass reinforced polyester hybrid composites
Mishra, S., Mohanty, A. K., Drzal, L. T., Misra, M., Parija, S., Nayak, S. K., & Tripathy, S. S. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00084-8 · Cited by 873
Chitosan–starch composite film: preparation and characterization
Xu, Y. X., Kim, K. M., Hanna, M. A., & Nag, D. (2005) · Industrial Crops and Products · doi:10.1016/j.indcrop.2004.03.002 · Cited by 862
Valadez-Gonzalez, A., Cervantes-Uc, J. M., Olayo, R., & Herrera-Franco, P. J. (1999) · Composites Part B: Engineering · doi:10.1016/s1359-8368(98)00054-7 · Cited by 829
Joseph, K., Thomas, S., & Pavithran, C. (1996) · Polymer · doi:10.1016/0032-3861(96)00144-9 · Cited by 742
Influence of processing and chemical treatment of flax fibres on their composites
de Weyenberg, I. V., Ivens, J., Coster, A. D., Kino, B., Baetens, E., & Verpoest, I. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00093-9 · Cited by 586
Effect of alkali treated jute fibres on composite properties
Ray, D., Sarkar, B. K., Rana, A. K., & Bose, N. R. (2001) · Bulletin of Materials Science · doi:10.1007/bf02710089 · Cited by 522
Bogoeva‐Gaceva, G., Avella, M., Malinconico, M., Buzarovska, A., Grozdanov, A., Gentile, G., & Errico, M. E. (2007) · Polymer Composites · doi:10.1002/pc.20270 · Cited by 521
International Encyclopedia of Composites
Lee, S. M. (2001) · Medical Entomology and Zoology · Cited by 499
Biofiber‐reinforced polypropylene composites
Karnani, R., Krishnan, M., & Narayan, R. (1997) · Polymer Engineering & Science · doi:10.1002/pen.11691 · Cited by 491
Sreekala, M. S., Kumaran, M. G., Joseph, S., Jacob, M., & Thomas, S. (2000) · Applied Composite Materials · doi:10.1023/a:1026534006291 · Cited by 489
Van de Weyenberg, I., Chi Truong, T., Vangrimde, B., & Verpoest, I. (2006) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2005.08.016 · Cited by 459
Polypropylene/wood flour composites: treatments and properties
Ichazo, M. N., Albano, C., González, J., Perera, R., & Candal, M. V. (2001) · Composite Structures · doi:10.1016/s0263-8223(01)00089-7 · Cited by 449
Gassan, J., & Bledzki, A. K. (1997) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/s1359-835x(97)00042-0 · Cited by 444
Chemical modification of henequén fibers with an organosilane coupling agent
Valadez-Gonzalez, A., Cervantes-Uc, J. M., Olayo, R., & Herrera-Franco, P. J. (1999) · Composites Part B: Engineering · doi:10.1016/s1359-8368(98)00055-9 · Cited by 414
Elements of polymer degradation
Reich, L., & Stivala, S. S. (1971) · Medical Entomology and Zoology · Cited by 400
Handbook of Engineering Polymeric Materials
Cheremisinoff, P. (1997) · CRC Press eBooks · doi:10.1201/9781482292183 · Cited by 366
Natural Fibers, Plastics and Composites
(2004) · Springer eBooks · doi:10.1007/978-1-4419-9050-1 · Cited by 364
BRAHMAKUMAR, M., PAVITHRAN, C., & PILLAI, R. (2005) · Composites Science and Technology · doi:10.1016/j.compscitech.2004.09.020 · Cited by 345
Chemical Modification of Lignocellulosic Materials
(2017) · Routledge eBooks · doi:10.1201/9781315139142 · Cited by 339
Composites from Natural Fibers and Soy Oil Resins
Williams, G. I., & Wool, R. P. (2000) · Applied Composite Materials · doi:10.1023/a:1026583404899 · Cited by 335
Liu, W., Misra, M., Askeland, P., Drzal, L. T., & Mohanty, A. K. (2005) · Polymer · doi:10.1016/j.polymer.2005.01.027 · Cited by 331
A REVIEW ON SISAL FIBER REINFORCED POLYMER COMPOSITES
Joseph, K., Tolêdo Filho, R. D., James, B., Thomas, S., & Carvalho, L. H. D. (1999) · Revista Brasileira de Engenharia Agrícola e Ambiental · doi:10.1590/1807-1929/agriambi.v3n3p367-379 · Cited by 330
Alkali treatment of jute fibers: Relationship between structure and mechanical properties
Gassan, J., & Bledzki, A. K. (1999) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19990124)71:4<623::aid-app14>3.0.co;2-k · Cited by 321
Mohanty, A. K., Khan, M. A., & Hinrichsen, G. (2000) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/s1359-835x(99)00057-3 · Cited by 319
Mohanty, A. K., Wibowo, A., Misra, M., & Drzal, L. T. (2004) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2003.09.015 · Cited by 317
Pre-treatment of Flax Fibers for use in Rotationally Molded Biocomposites
Wang, B., Panigrahi, S., Tabil, L. G., & Crerar, W. J. (2007) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684406072526 · Cited by 316
HORNSBY, P. R., HINRICHSEN, E., & TARVERDI, K. (1997) · Journal of Materials Science · doi:10.1023/a:1018578322498 · Cited by 310
A study of the potential of acetylation to improve the properties of plant fibres
Hill, C. A. S., Khalil, H. P. S. A., & Hale, M. D. C. (1998) · Industrial Crops and Products · doi:10.1016/s0926-6690(97)10012-7 · Cited by 293
Agrawal, R., Saxena, N. S., Sharma, K. B., Thomas, S., & Sreekala, M. S. (2000) · Materials Science and Engineering A · doi:10.1016/s0921-5093(99)00556-0 · Cited by 285
Wielage, B., Lampke, T., Marx, G., Nestler, K., & Starke, D. (1999) · Thermochimica Acta · doi:10.1016/s0040-6031(99)00161-6 · Cited by 284
Thermoplastic polymers reinforced with fibrous agricultural residues
Georgopoulos, S. T., Tarantili, P. A., Avgerinos, E., Andreopoulos, A. G., & Koukios, E. G. (2005) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2005.02.020 · Cited by 263
Morphology and mechanical properties of unidirectional sisal– epoxy composites
Oksman, K., Wallström, L., Berglund, L. A., & Filho, R. D. T. (2002) · Journal of Applied Polymer Science · doi:10.1002/app.10475 · Cited by 251
Structure and properties of some vegetable fibres: Part 3Talipot and palmyrah fibres
Satyanarayana, K. G., Ravikumar, K. K., Sukumaran, K., Mukherjee, P. S., Pillai, S. G. K., & Kulkarni, A. G. (1986) · Journal of Materials Science · doi:10.1007/bf01144699 · Cited by 250
Effect of MAPP as a Coupling Agent on the Performance of Jute–PP Composites
Mohanty, S., NAYAK, S. K., Verma, S. K., & Tripathy, S. S. (2004) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684404032868 · Cited by 242
High Quality Flax Fibre Composites Manufactured by the Resin Transfer Moulding Process
Oksman, K. (2001) · Journal of Reinforced Plastics and Composites · doi:10.1177/073168401772678634 · Cited by 241
Handbook of Plastics Testing Technology
Shah, V. (1984) · Medical Entomology and Zoology · Cited by 235
Water sorption in oil palm fiber reinforced phenol formaldehyde composites
Sreekala, M. S., Kumaran, M. G., & Thomas, S. (2002) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/s1359-835x(02)00032-5 · Cited by 231
Thermal degradation of flax and jute fibers
Gassan, J., & Bledzki, A. K. (2001) · Journal of Applied Polymer Science · doi:10.1002/app.1979 · Cited by 229
Coutinho, F. M. B., Costa, T. H. S., & Carvalho, D. L. (1997) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19970808)65:6<1227::aid-app18>3.0.co;2-q · Cited by 227
Pull-out and other evaluations in sisal-reinforced polyester biocomposites
Sydenstricker, T. H. D., Mochnaz, S., & Amico, S. C. (2003) · Polymer Testing · doi:10.1016/s0142-9418(02)00116-2 · Cited by 215
Jähn, A., Schröder, M. W., Füting, M., Schenzel, K., & Diepenbrock, W. (2002) · Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy · doi:10.1016/s1386-1425(01)00697-7 · Cited by 212
Mishra, S., Naik, J., & Patil, Y. P. (2000) · Composites Science and Technology · doi:10.1016/s0266-3538(00)00056-7 · Cited by 211
Thermoplastic pultrusion of natural fibre reinforced composites
de Velde, K. V., & Kiekens, P. (2001) · Composite Structures · doi:10.1016/s0263-8223(01)00110-6 · Cited by 204
Pothan, L. A., & Thomas, S. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00092-7 · Cited by 194
Fibres from semi-retted hemp bundles by steam explosion treatment
Garcia-, C., Jaldon, Dupeyre, D., & Vignon, M. R. (1998) · Biomass and Bioenergy · doi:10.1016/s0961-9534(97)10039-3 · Cited by 193
Mechanical Properties of Natural Fibre Mat Reinforced Thermoplastic
Oksman, K. (2000) · Applied Composite Materials · doi:10.1023/a:1026546426764 · Cited by 182
Alvarez, V. A., Ruscekaite, R. A., & Vazquez, A. (2003) · Journal of Composite Materials · doi:10.1177/0021998303035180 · Cited by 179
Liu, W., Mohanty, A. K., Askeland, P. A., Drzal, L. T., & Misra, M. (2004) · Polymer · doi:10.1016/j.polymer.2004.09.009 · Cited by 172
Melt rheological behaviour of short pineapple fibre reinforced low density polyethylene composites
George, J., Janardhan, R., Anand, J. S., Bhagawan, S. S., & Thomas, S. (1996) · Polymer · doi:10.1016/s0032-3861(96)00386-2 · Cited by 168
Structure and properties of some vegetable fibres: Part 2Pineapple fibre (Anannus Comosus)
Mukherjee, P. S., & Satyanarayana, K. G. (1986) · Journal of Materials Science · doi:10.1007/bf01144698 · Cited by 164
The potential of flax fibres as reinforcement for composite materials
Bos, H. (2004) · doi:10.6100/ir575360 · Cited by 160
The Ultrastructure of Wood from a Solubility Parameter Point of View
Hansen, C. M., & Björkman, A. (1998) · Holzforschung · doi:10.1515/hfsg.1998.52.4.335 · Cited by 155
The influence of chemical surface modification on the performance of sisal‐polyester biocomposites
Misra, S., Misra, M., Tripathy, S. S., NAYAK, S. K., & Mohanty, A. K. (2002) · Polymer Composites · doi:10.1002/pc.10422 · Cited by 138
Chemical and physical characterization of water- and dew-retted flax fibers
Morrison, W. H., Archibald, D. D., Sharma, H. S. S., & Akin, D. E. (2000) · Industrial Crops and Products · doi:10.1016/s0926-6690(99)00044-8 · Cited by 132
Li, X. H., Meng, Y., Wang, S., Rajulu, A. V., & Tjong, S. C. (2004) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.10761 · Cited by 132
Bagasse Fiber-Polypropylene Based Composites
Vázquez, A., Domínguez, V. A. A., & Kenny, J. M. (1999) · Journal of Thermoplastic Composite Materials · doi:10.1177/089270579901200604 · Cited by 128
Mahlberg, R., Niemi, H., Denes, F., & Rowell, R. M. (1998) · International Journal of Adhesion and Adhesives · doi:10.1016/s0143-7496(98)00007-4 · Cited by 124
Dynamic Mechanical Properties of Short Sisal Fiber Reinforced Low Density Polyethylene Composites
Joseph, K., Thomas, S., & Pavithran, C. (1993) · Journal of Reinforced Plastics and Composites · doi:10.1177/073168449301200202 · Cited by 120
Improved interactions in chemically modified pineapple leaf fiber reinforced polyethylene composites
George, J., Bhagawan, S. S., & Thomas, S. (1997) · Composite Interfaces · doi:10.1163/156855498x00153 · Cited by 116
Nechwatal, A., Mieck, K., & Reußmann, T. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00098-8 · Cited by 98
Dicumyl peroxide‐modified cellulose/LLDPE composites
Sapieha, S., Allard, P., & Zang, Y. (1990) · Journal of Applied Polymer Science · doi:10.1002/app.1990.070410910 · Cited by 95
Mahlberg, R., Niemi, H., Denes, F. S., et al. (1999) · Langmuir · doi:10.1021/la980139b · Cited by 91
Pothan, L. A., George, C. N., Jacob, M., & Thomas, S. (2007) · Journal of Composite Materials · doi:10.1177/0021998307075456 · Cited by 75
Thermoplasticization of wood. I. Benzylation of wood
Hon, D. N. ‐., & Ou, N.-H. (1989) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.1989.080270725 · Cited by 72
Einfluß von haftvermittlern auf das feuchteverhalten naturfaserverstärkter kunststoffe
Bledzki, A. K., & Gassan, J. (1996) · Die Angewandte Makromolekulare Chemie · doi:10.1002/apmc.1996.052360110 · Cited by 68
Acetylation of jute: Effects on strength, rot resistance, and hydrophobicity
Andersson, M., & Tillman, A. (1989) · Journal of Applied Polymer Science · doi:10.1002/app.1989.070371214 · Cited by 65
Composites of Polyvinyl Chloride-Wood Fibers. I. Effect of Isocyanate as a Bonding Agent
Kokta, B. V., Maldas, D., Daneault, C., et al. (1990) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559008049836 · Cited by 64
El-Zawahry, M. M., Ibrahim, N. A., & Eid, M. A. M. (2006) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602550600728943 · Cited by 55
Raj, R. G., Kokta, B. V., Maldas, D., & Daneault, C. (1988) · Polymer Composites · doi:10.1002/pc.750090606 · Cited by 55
Über pfropf‐ und block‐mischpolymere aus synthetischen und natürlichen makromolekülen
Immergut, V. E. H., & Mark, H. F. (1956) · Die Makromolekulare Chemie · doi:10.1002/macp.1956.020180128 · Cited by 50
The Synthesis and Applicability of Block and Graft Copolymers
Mark, H. F. (1953) · Textile Research Journal · doi:10.1177/004051755302300504 · Cited by 42
DC pseudo plasma discharge treatment of polyester textile surface for disperse dyeing
Elnagar, K., Saudy, M. A., Eatah, A. I., et al. (2006) · Journal of the Textile Institute · doi:10.1533/joti.2005.0169 · Cited by 36
Cosnier, S., Fologea, D., Szunerits, S., & Marks, R. S. (2000) · Electrochemistry Communications · doi:10.1016/s1388-2481(00)00131-4 · Cited by 29
Impact damage in a composite material
Reed, P. E., & Beva, L. (1993) · Polymer Composites · doi:10.1002/pc.750140403 · Cited by 19
Regenerated Cellulose Reinforced Plastics
Eichhorn, S. J. (2004) · Springer eBooks · doi:10.1007/978-1-4419-9050-1_16 · Cited by 7
Cited by
Chemical treatments on plant-based natural fibre reinforced polymer composites: An overview
Kabir, M. M., Wang, H., Lau, K. T., & Cardona, F. (2012) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2012.04.053 · Cited by 1,851
Cellulosic/synthetic fibre reinforced polymer hybrid composites: A review
Jawaid, M., & Abdul Khalil, H. P. S. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.04.043 · Cited by 1,567
Gurunathan, T., Mohanty, S., & Nayak, S. K. (2015) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.06.007 · Cited by 1,362
Abdul Khalil, H. P. S., Davoudpour, Y., Islam, M. N., Mustapha, A., Sudesh, K., Dungani, R., & Jawaid, M. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.08.069 · Cited by 1,333
Green composites: A brief review
La Mantia, F. P., & Morreale, M. (2011) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2011.01.017 · Cited by 1,125
Metadata
- Authors
- Kalia, S., Kaith, B. S., & Kaur, I.
- Venue
- Polymer Engineering & Science
- Publisher
- Wiley
- Published
- 2009-03-12
- Volume
- 49
- Issue
- 7
- Pages
- 1253-1272
- ISSN
- 0032-3888 (ISSN-L)
- 1548-2634
- OpenAlex
- W2009388318
- Cited by
- 1,447
- References
- 88
- FWCI
- 35.96
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.