Nonisothermal crystallization kinetics of poly(lactide)—effect of plasticizers and nucleating agent
The DOI matches its Crossref record; 15 of the 15 references it cites were found in a registry or an index.
Abstract
Poly(lactide), a bio‐based aliphatic polyester, is a subject to large research effort. One point of optimization is the acceleration of its crystallization kinetics to promote crystallinity under nonisothermal polymer processing conditions by means of compounding with nucleating agents and plasticizers. The nonisothermal crystallization kinetics of neat and formulated poly(L,D‐lactide) (PDLLA) from the melt with talc and polyethylene glycol (PEG) or acetyl tributyl citrate (ATBC) were studied with the help of the Avrami–Jeziorny and Liu–Mo analysis. Talc showed to be a moderately efficient nucleating agent, as it causes only small increase of crystallization kinetics and shows no effect on the crystallization activation energy. A synergistic effect with plasticizers was observed, expanding the crystallization window significantly. PEG was found to be a more efficient plasticizer than ATBC but causes large decrease in the molecular weight average of PDLLA upon thermal treatment. The talc/ATBC system is efficient starting with an ATBC concentration of 9 wt%. The acceleration observed was a crystallization half‐time decrease of 30% compared to neat PLA and reaching maximum crystallization enthalpies even at cooling rate of 25°C min−1. The ATBC/talc system can be recommended as an efficient system for acceleration of nonisothermal crystallization kinetics of PDLLA. POLYM. ENG. SCI., 2013. © 2012 Society of Plastics Engineers
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Processing technologies for poly(lactic acid)
Lim, L.-T., Auras, R., & Rubino, M. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.05.004 · Cited by 2,766
Thompson, R. C., Swan, S. H., Moore, C. J., & vom Saal, F. S. (2009) · Philosophical Transactions of the Royal Society B: Biological Sciences · doi:10.1098/rstb.2009.0054 · Cited by 1,294
Biodegradable and compostable alternatives to conventional plastics
Song, J. H., Murphy, R. J., Narayan, R., & Davies, G. B. H. (2009) · Philosophical Transactions of the Royal Society B: Biological Sciences · doi:10.1098/rstb.2008.0289 · Cited by 971
New emerging trends in synthetic biodegradable polymers—Polylactide: A critique
Gupta, A. P., & Kumar, V. (2007) · European Polymer Journal · doi:10.1016/j.eurpolymj.2007.06.045 · Cited by 941
Effect of nucleation and plasticization on the crystallization of poly (lactic acid)
Li, H., & Huneault, M. A. (2007) · Polymer · doi:10.1016/j.polymer.2007.09.020 · Cited by 810
Thermal and mechanical properties of plasticized poly(L‐lactic acid)
Baiardo, M., Frisoni, G., Scandola, M., Rimelen, M., Lips, D., Ruffieux, K., & Wintermantel, E. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.12549 · Cited by 568
Plasticizing polylactide—the effect of different plasticizers on the mechanical properties
Jacobsen, S., & Fritz, H. G. (1999) · Polymer Engineering & Science · doi:10.1002/pen.11517 · Cited by 540
Crystallization Behavior and Morphology of Biodegradable Polylactide/Layered Silicate Nanocomposite
Nam, J. Y., Sinha Ray, S., & Okamoto, M. (2003) · Macromolecules · doi:10.1021/ma034623j · Cited by 429
Plasticization of Poly(l-lactide) with Poly(propylene glycol)
Kulinski, Z., Piorkowska, E., Gadzinowska, K., & Stasiak, M. (2006) · Biomacromolecules · doi:10.1021/bm060089m · Cited by 320
Plasticization of semicrystalline poly(l-lactide) with poly(propylene glycol)
Piorkowska, E., Kulinski, Z., Galeski, A., & Masirek, R. (2006) · Polymer · doi:10.1016/j.polymer.2006.03.115 · Cited by 301
Cited by
PLA composites: From production to properties
Murariu, M., & Dubois, P. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.04.003 · Cited by 1,005
Petro‐based and bio‐based plasticizers: Chemical structures to plasticizing properties
Bocqué, M., Voirin, C., Lapinte, V., Caillol, S., & Robin, J. (2016) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.27917 · Cited by 469
Bionanocomposite films based on plasticized PLA–PHB/cellulose nanocrystal blends
Arrieta, M. P., Fortunati, E., Dominici, F., López, J., & Kenny, J. M. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.12.056 · Cited by 360
Tailoring crystallization: towards high-performance poly(lactic acid)
Liu, G., Zhang, X., & Wang, D. (2014) · Advanced Materials · doi:10.1002/adma.201305413 · Cited by 249
Arrieta, M. P., Castro-López, M. D. M., Rayón, E., Barral-Losada, L. F., López-Vilariño, J. M., López, J., & González-Rodríguez, M. V. (2014) · Journal of Agricultural and Food Chemistry · doi:10.1021/jf5029812 · Cited by 196
Combined effect of nucleating agent and plasticizer on the crystallization behaviour of polylactide
Anakabe, J., Zaldua Huici, A. M., Eceiza, A., Arbelaiz, A., & Avérous, L. (2017) · Polymer Bulletin · doi:10.1007/s00289-017-1989-z · Cited by 38
Self-citation
Metadata
- Authors
- Courgneau, C., Ducruet, V., Avérous, L., Grenet, J., & Domenek, S.
- Venue
- Polymer Engineering & Science
- Publisher
- Wiley
- Published
- 2012-10-31
- Volume
- 53
- Issue
- 5
- Pages
- 1085-1098
- ISSN
- 0032-3888 (ISSN-L)
- 1548-2634
- OpenAlex
- W2102927525
- Cited by
- 46
- References
- 15
- FWCI
- 3.27
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.