The DOI matches its Crossref record.
Morphology development in polymer blends
Abstract
The major morphological changes during polymer blending occur during the initial softening stage. This work explains the evolution of phase morphology of polymer blends from pellets to submicron particles in a co‐rotating twin‐screw extruder. The extruder was opened and blend samples were taken along its length. The major phase component was extracted by means of a selective solvent so that the dispersed phase morphology could be viewed directly by using scanning electron microscopy. The two systems studied were 80:20 polystyrene/amorphous polyamide and 80:20 polystyrene/polypropylene. In both systems, the initial morphology consisted of sheets of dispersed phase. Holes form in the sheets, and these holes grow as a result of interfacial tension forces until they coalesce with each other, forming thin ligaments. These fluid ligaments are unstable and break up via mixer shear forces. Very large changes in dispersed phase size are observed during the softening stage. The particle size changes less after the polymers are completely melted. The extruder results are compared to results from a batch mixer. The same dispersed phase sheeting mechanism is seen in the initial morphology in the batch mixer and the breakup of the dispersed phase domains parallels the breakup seen in the extruder.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
A Review of CO2 Applications in the Processing of Polymers
Tomasko, D. L., Li, H., Liu, D., Han, X., Wingert, M. J., Lee, L. J., & Koelling, K. W. (2003) · Industrial & Engineering Chemistry Research · doi:10.1021/ie030199z · Cited by 686
Compatibilizers for melt blending: premade block copolymers
Macosko, C. W., Guégan, P., Khandpur, A. K., Nakayama, A., Marechal, P., & Inoue, T. (1996) · Macromolecules · doi:10.1021/ma9602482 · Cited by 458
Self-citationMorphology development during the initial stages of polymer-polymer blending
SCOTT, C. (1995) · Polymer · doi:10.1016/0032-3861(95)91554-k · Cited by 292
Reactions at polymer–polymer interfaces for blend compatibilization
Macosko, C. W., Jeon, H. K., & Hoye, T. R. (2005) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2005.06.003 · Cited by 259
Self-citationMacro, micro and nanostructured morphologies of multiphase polymer systems
Huang, H. (2011) · Handbook of Multiphase Polymer Systems · doi:10.1002/9781119972020.ch6 · Cited by 16
Metadata
- Authors
- Sundararaj, U., Macosko, C. W., Rolando, R. J., & Chan, H. T.
- Venue
- Polymer Engineering & Science
- Publisher
- Wiley
- Published
- 1992-12
- Volume
- 32
- Issue
- 24
- Pages
- 1814-1823
- ISSN
- 0032-3888 (ISSN-L)
- 1548-2634
- OpenAlex
- W2051220563
- Cited by
- 231
- References
- 0
- FWCI
- 7.41
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Morphology development in polymer blends. https://app.cochat.ai/papers/10.1002/pen.760322404
- The paper
- Sundararaj, U., Macosko, C. W., Rolando, R. J., & Chan, H. T. (1992). Morphology development in polymer blends. Polymer Engineering & Science. https://doi.org/10.1002/pen.760322404
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.