The DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.
Morphology of ultrafine polysulfone fibers prepared by electrospinning
Abstract
Ultrafine fibers of bisphenol‐A polysulfone (PSF) were prepared by electrospinning of PSF solutions in mixtures of N,N‐dimethylacetamide (DMAC) and acetone at high voltages. The morphology of the electrospun PSF fibers was investigated by scanning electron microscopy. Results showed that the concentration of polymer solutions and the acetone amount in the mixed solvents influenced the morphology and the diameter of the electrospun fibers. The processing parameters, including the applied voltage, the flow rate, and the distance between capillary and collection screen, were also important for control of the morphology of electrospun PSF fibers. It was suggested that uniform ultrafine PSF fibers with diameter of 300–400 nm could be obtained by electrospinning of a 20 % (wt/v) PSF/DMAC/acetone (DMAC:acetone = 9:1) solution at 10–20 kV voltages when the flow rate was 0.66 ml h−1 and capillary–screen distance was 10 cm. Copyright © 2004 Society of Chemical Industry
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Nanometre diameter fibres of polymer, produced by electrospinning
Reneker, D. H., & Chun, I. (1996) · Nanotechnology · doi:10.1088/0957-4484/7/3/009 · Cited by 3,520
Electrospinning process and applications of electrospun fibers
Doshi, J., & Reneker, D. H. (1995) · Journal of Electrostatics · doi:10.1016/0304-3886(95)00041-8 · Cited by 3,209
The effect of processing variables on the morphology of electrospun nanofibers and textiles
Deitzel, J. M., Kleinmeyer, J., Harris, D., & Beck Tan, N. C. (2001) · Polymer · doi:10.1016/s0032-3861(00)00250-0 · Cited by 2,915
Beaded nanofibers formed during electrospinning
Fong, H., Chun, I., & Reneker, D. H. (1999) · Polymer · doi:10.1016/s0032-3861(99)00068-3 · Cited by 2,553
Bending instability of electrically charged liquid jets of polymer solutions in electrospinning
Reneker, D. H., Yarin, A. L., Fong, H., & Koombhongse, S. (2000) · Journal of Applied Physics · doi:10.1063/1.373532 · Cited by 2,462
Electrospun nanofibrous structure: A novel scaffold for tissue engineering
Li, W., Laurencin, C. T., Caterson, E. J., Tuan, R. S., & Ko, F. K. (2002) · Journal of Biomedical Materials Research · doi:10.1002/jbm.10167 · Cited by 2,427
Electrospinning of Collagen Nanofibers
Matthews, J. A., Wnek, G. E., Simpson, D. G., & Bowlin, G. L. (2002) · Biomacromolecules · doi:10.1021/bm015533u · Cited by 2,251
A biodegradable nanofiber scaffold by electrospinning and its potential for bone tissue engineering
Yoshimoto, H., Shin, Y. M., Terai, H., & Vacanti, J. P. (2003) · Biomaterials · doi:10.1016/s0142-9612(02)00635-x · Cited by 1,977
Structure and process relationship of electrospun bioabsorbable nanofiber membranes
Zong, X., Kim, K., Fang, D., Ran, S., Hsiao, B. S., & Chu, B. (2002) · Polymer · doi:10.1016/s0032-3861(02)00275-6 · Cited by 1,893
Kenawy, E.-R., Bowlin, G. L., Mansfield, K., Layman, J., Simpson, D. G., Sanders, E. H., & Wnek, G. E. (2002) · Journal of Controlled Release · doi:10.1016/s0168-3659(02)00041-x · Cited by 1,311
Nanostructured Fibers via Electrospinning
Bognitzki, M., Czado, W., Frese, T., Schaper, A., Hellwig, M., Steinhart, M., Greiner, A., & Wendorff, J. H. (2001) · Advanced Materials · doi:10.1002/1521-4095(200101)13:1<70::aid-adma70>3.0.co;2-h · Cited by 1,236
Electrospinning of polyurethane fibers
Demir, M. M., Yilgor, I., Yilgor, E., & Erman, B. (2002) · Polymer · doi:10.1016/s0032-3861(02)00136-2 · Cited by 1,099
Experimental characterization of electrospinning: the electrically forced jet and instabilities
Shin, Y. M., Hohman, M. M., Brenner, M. P., & Rutledge, G. C. (2001) · Polymer · doi:10.1016/s0032-3861(01)00540-7 · Cited by 1,070
Transport properties of porous membranes based on electrospun nanofibers
Gibson, P., Schreuder-Gibson, H., & Rivin, D. (2001) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/s0927-7757(01)00616-1 · Cited by 877
Controlled deposition of electrospun poly(ethylene oxide) fibers
Deitzel, J. (2001) · Polymer · doi:10.1016/s0032-3861(01)00336-6 · Cited by 853
Electrospinning Bombyx mori Silk with Poly(ethylene oxide)
Jin, H.-J., Fridrikh, S. V., Rutledge, G. C., & Kaplan, D. L. (2002) · Biomacromolecules · doi:10.1021/bm025581u · Cited by 715
Processing and microstructural characterization of porous biocompatible protein polymer thin films
Buchko, C. J., Chen, L. C., Shen, Y., & Martin, D. C. (1999) · Polymer · doi:10.1016/s0032-3861(98)00866-0 · Cited by 714
Characterization of nano-structured poly(ε-caprolactone) nonwoven mats via electrospinning
Lee, K. H., Kim, H. Y., Khil, M. S., Ra, Y. M., & Lee, D. R. (2003) · Polymer · doi:10.1016/s0032-3861(02)00820-0 · Cited by 586
Electrostatic fabrication of ultrafine conducting fibers: polyaniline/polyethylene oxide blends
Norris, I. D., Shaker, M. M., Ko, F. K., & MacDiarmid, A. G. (2000) · Synthetic Metals · doi:10.1016/s0379-6779(00)00217-4 · Cited by 564
Larrondo, L., & St. John Manley, R. (1981) · Journal of Polymer Science: Polymer Physics Edition · doi:10.1002/pol.1981.180190601 · Cited by 490
Boland, E., Wnek, G., Simpson, D., Pawlowski, K., & Bowlin, G. (2001) · Journal of Macromolecular Science, Part A · doi:10.1081/ma-100108380 · Cited by 464
Generation of electrospun fibers of nylon 6 and nylon 6-montmorillonite nanocomposite
Fong, H. (2002) · Polymer · doi:10.1016/s0032-3861(01)00665-6 · Cited by 396
Different electrostatic methods for making electret filters
Tsai, P. P., Schreuder-Gibson, H., & Gibson, P. (2002) · Journal of Electrostatics · doi:10.1016/s0304-3886(01)00160-7 · Cited by 373
Preparation of fibers with nanoscaled morphologies: Electrospinning of polymer blends
Bognitzki, M., Frese, T., Steinhart, M., Greiner, A., Wendorff, J. H., Schaper, A., & Hellwig, M. (2001) · Polymer Engineering and Science · doi:10.1002/pen.10799 · Cited by 335
Ohgo, K., Zhao, C., Kobayashi, M., & Asakura, T. (2003) · Polymer · doi:10.1016/s0032-3861(02)00819-4 · Cited by 276
Nanofiber garlands of polycaprolactone by electrospinning
Reneker, D. H., Kataphinan, W., Theron, A., Zussman, E., & Yarin, A. L. (2002) · Polymer · doi:10.1016/s0032-3861(02)00595-5 · Cited by 239
Surface characterization of porous, biocompatible protein polymer thin films
Buchko, C. J. (2001) · Biomaterials · doi:10.1016/s0142-9612(00)00281-7 · Cited by 116
Thermal Properties of Electrospun Polyesters
Kim, J., & Lee, D.-S. (2000) · Polymer Journal · doi:10.1295/polymj.32.616 · Cited by 110
Cited by
Electrospinning: A fascinating fiber fabrication technique
Bhardwaj, N., & Kundu, S. C. (2010) · Biotechnology Advances · doi:10.1016/j.biotechadv.2010.01.004 · Cited by 5,028
Electrospinning of Polymeric Nanofibers for Tissue Engineering Applications: A Review
Pham, Q. P., Sharma, U., & Mikos, A. G. (2006) · Tissue Engineering · doi:10.1089/ten.2006.12.1197 · Cited by 2,256
Electrospinning for tissue engineering applications
Rahmati, M., Mills, D. K., Urbanska, A. M., Saeb, M. R., Venugopal, J. R., Ramakrishna, S., & Mozafari, M. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100721 · Cited by 816
Polyacrylonitrile-based nanofibers—A state-of-the-art review
Nataraj, S. K., Yang, K. S., & Aminabhavi, T. M. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.07.001 · Cited by 662
NANOFIBROUS MATERIALS AND THEIR APPLICATIONS
Burger, C., Hsiao, B. S., & Chu, B. (2006) · Annual Review of Materials Research · doi:10.1146/annurev.matsci.36.011205.123537 · Cited by 622
Metadata
- Authors
- Yuan, X., Zhang, Y., Dong, C., & Sheng, J.
- Venue
- Polymer International
- Publisher
- Wiley
- Published
- 2004-07-26
- Volume
- 53
- Issue
- 11
- Pages
- 1704-1710
- ISSN
- 0959-8103 (ISSN-L)
- 1097-0126
- OpenAlex
- W1969605890
- Cited by
- 358
- References
- 28
- FWCI
- 3.43
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.