The DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.
Morphology of ultrafine polysulfone fibers prepared by electrospinning
Abstract
Ultrafine fibers of bisphenol‐A polysulfone (PSF) were prepared by electrospinning of PSF solutions in mixtures of N,N‐dimethylacetamide (DMAC) and acetone at high voltages. The morphology of the electrospun PSF fibers was investigated by scanning electron microscopy. Results showed that the concentration of polymer solutions and the acetone amount in the mixed solvents influenced the morphology and the diameter of the electrospun fibers. The processing parameters, including the applied voltage, the flow rate, and the distance between capillary and collection screen, were also important for control of the morphology of electrospun PSF fibers. It was suggested that uniform ultrafine PSF fibers with diameter of 300–400 nm could be obtained by electrospinning of a 20 % (wt/v) PSF/DMAC/acetone (DMAC:acetone = 9:1) solution at 10–20 kV voltages when the flow rate was 0.66 ml h−1 and capillary–screen distance was 10 cm. Copyright © 2004 Society of Chemical Industry
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Nanometre diameter fibres of polymer, produced by electrospinning
Reneker, D. H., & Chun, I. (1996) · Nanotechnology · doi:10.1088/0957-4484/7/3/009 · Cited by 3,520
Electrospinning process and applications of electrospun fibers
Doshi, J., & Reneker, D. H. (1995) · Journal of Electrostatics · doi:10.1016/0304-3886(95)00041-8 · Cited by 3,209
The effect of processing variables on the morphology of electrospun nanofibers and textiles
Deitzel, J. M., Kleinmeyer, J., Harris, D., & Beck Tan, N. C. (2001) · Polymer · doi:10.1016/s0032-3861(00)00250-0 · Cited by 2,915
Beaded nanofibers formed during electrospinning
Fong, H., Chun, I., & Reneker, D. H. (1999) · Polymer · doi:10.1016/s0032-3861(99)00068-3 · Cited by 2,553
Bending instability of electrically charged liquid jets of polymer solutions in electrospinning
Reneker, D. H., Yarin, A. L., Fong, H., & Koombhongse, S. (2000) · Journal of Applied Physics · doi:10.1063/1.373532 · Cited by 2,462
Electrospun nanofibrous structure: A novel scaffold for tissue engineering
Li, W., Laurencin, C. T., Caterson, E. J., Tuan, R. S., & Ko, F. K. (2002) · Journal of Biomedical Materials Research · doi:10.1002/jbm.10167 · Cited by 2,427
Electrospinning of Collagen Nanofibers
Matthews, J. A., Wnek, G. E., Simpson, D. G., & Bowlin, G. L. (2002) · Biomacromolecules · doi:10.1021/bm015533u · Cited by 2,251
A biodegradable nanofiber scaffold by electrospinning and its potential for bone tissue engineering
Yoshimoto, H., Shin, Y. M., Terai, H., & Vacanti, J. P. (2003) · Biomaterials · doi:10.1016/s0142-9612(02)00635-x · Cited by 1,977
Structure and process relationship of electrospun bioabsorbable nanofiber membranes
Zong, X., Kim, K., Fang, D., Ran, S., Hsiao, B. S., & Chu, B. (2002) · Polymer · doi:10.1016/s0032-3861(02)00275-6 · Cited by 1,893
Kenawy, E.-R., Bowlin, G. L., Mansfield, K., Layman, J., Simpson, D. G., Sanders, E. H., & Wnek, G. E. (2002) · Journal of Controlled Release · doi:10.1016/s0168-3659(02)00041-x · Cited by 1,311
Cited by
Electrospinning: A fascinating fiber fabrication technique
Bhardwaj, N., & Kundu, S. C. (2010) · Biotechnology Advances · doi:10.1016/j.biotechadv.2010.01.004 · Cited by 5,028
Electrospinning of Polymeric Nanofibers for Tissue Engineering Applications: A Review
Pham, Q. P., Sharma, U., & Mikos, A. G. (2006) · Tissue Engineering · doi:10.1089/ten.2006.12.1197 · Cited by 2,256
Electrospinning for tissue engineering applications
Rahmati, M., Mills, D. K., Urbanska, A. M., Saeb, M. R., Venugopal, J. R., Ramakrishna, S., & Mozafari, M. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100721 · Cited by 816
Polyacrylonitrile-based nanofibers—A state-of-the-art review
Nataraj, S. K., Yang, K. S., & Aminabhavi, T. M. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.07.001 · Cited by 662
NANOFIBROUS MATERIALS AND THEIR APPLICATIONS
Burger, C., Hsiao, B. S., & Chu, B. (2006) · Annual Review of Materials Research · doi:10.1146/annurev.matsci.36.011205.123537 · Cited by 622
Electrospun nanofibers: New generation materials for advanced applications
Thenmozhi, S., Dharmaraj, N., Kadirvelu, K., & Kim, H. Y. (2017) · Materials Science and Engineering: B · doi:10.1016/j.mseb.2017.01.001 · Cited by 516
Ghorani, B., & Tucker, N. (2015) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2015.05.024 · Cited by 493
Effects of Humidity and Solution Viscosity on Electrospun Fiber Morphology
Nezarati, R. M., Eifert, M. B., & Cosgriff-Hernandez, E. (2013) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2012.0671 · Cited by 459
A review on electrospun polymeric nanofibers: Production parameters and potential applications
Ibrahim, H. M., & Klingner, A. (2020) · Polymer Testing · doi:10.1016/j.polymertesting.2020.106647 · Cited by 402
A review on fabrication of nanofibers via electrospinning and their applications
Islam, M. S., Ang, B. C., Andriyana, A., & Afifi, A. M. (2019) · SN Applied Sciences · doi:10.1007/s42452-019-1288-4 · Cited by 386
Kim, J. F., Kim, J. H., Lee, Y. M., & Drioli, E. (2016) · AIChE Journal · doi:10.1002/aic.15076 · Cited by 358
Investigation on process parameters of electrospinning system through orthogonal experimental design
Cui, W., Li, X., Zhou, S., & Weng, J. (2007) · Journal of Applied Polymer Science · doi:10.1002/app.25464 · Cited by 336
Electrospinning of Chitosan-Based Solutions for Tissue Engineering and Regenerative Medicine
Qasim, S., Zafar, M., Najeeb, S., Khurshid, Z., Shah, A., Husain, S., & Rehman, I. (2018) · International Journal of Molecular Sciences · doi:10.3390/ijms19020407 · Cited by 327
Effects of Working Parameters on Electrospinning
Li, Z., & Wang, C. (2013) · SpringerBriefs in Materials · doi:10.1007/978-3-642-36427-3_2 · Cited by 301
The Effect of Flow Rate on Morphology and Deposition Area of Electrospun Nylon 6 Nanofiber
Zargham, S., Bazgir, S., Tavakoli, A., Rashidi, A. S., & Damerchely, R. (2012) · Journal of Engineered Fibers and Fabrics · doi:10.1177/155892501200700414 · Cited by 282
Mechanical Properties of Electrospun Fibers—A Critical Review
Rashid, T. U., Gorga, R. E., & Krause, W. E. (2021) · Advanced Engineering Materials · doi:10.1002/adem.202100153 · Cited by 268
Recent advancements in electrospinning design for tissue engineering applications: A review
Kishan, A. P., & Cosgriff‐Hernandez, E. M. (2017) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.36124 · Cited by 261
Hernandez, J. L., & Woodrow, K. A. (2022) · Advanced Healthcare Materials · doi:10.1002/adhm.202102087 · Cited by 259
An electrospun triphasic nanofibrous scaffold for bone tissue engineering
Catledge, S. A., Clem, W. C., Shrikishen, N., Chowdhury, S., Stanishevsky, A. V., Koopman, M., & Vohra, Y. K. (2007) · Biomedical Materials · doi:10.1088/1748-6041/2/2/013 · Cited by 167
Metadata
- Authors
- Yuan, X., Zhang, Y., Dong, C., & Sheng, J.
- Venue
- Polymer International
- Publisher
- Wiley
- Published
- 2004-07-26
- Volume
- 53
- Issue
- 11
- Pages
- 1704-1710
- ISSN
- 0959-8103 (ISSN-L)
- 1097-0126
- OpenAlex
- W1969605890
- Cited by
- 358
- References
- 28
- FWCI
- 3.43
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.