Effect of crystallization on microstructure and mechanical properties of poly[(ethylene oxide)‐block‐(amide‐12)]‐toughened poly(lactic acid) blend
The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Abstract
The effect of crystallization on the microstructure and mechanical properties of a poly[(ethylene oxide)‐block‐(amide‐12)] (PEBA)‐toughened poly(lactic acid) (PLA) blend was investigated. Annealing was used to govern the crystallization microstructure and hence the mechanical properties of the blend. Crystallization resulted in the morphology of the PLA component altering from a continuous amorphous phase to continuous crystalline phase. Moreover, as the crystallization of PLA proceeded, the degree of crystallinity, spherulite size and lamellar thickness increased, and the interlamellar and interspherulitic connections became weaker. These led to the large plastic deformation in the matrix during tension being suppressed, and cracks appeared easily under tensile load, which was favorable to fracture for the blend during tension and so a small elongation at break was obtained. However, the elongation at break for all the annealed specimens was higher than that for neat amorphous PLA, suggesting that PEBA still showed a toughening effect for PLA under annealing. © 2012 Society of Chemical Industry
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Zhang, J., Duan, Y., Sato, H., Tsuji, H., Noda, I., Yan, S., & Ozaki, Y. (2005) · Macromolecules · doi:10.1021/ma051232r · Cited by 893
Suryanegara, L., Nakagaito, A. N., & Yano, H. (2009) · Composites Science and Technology · doi:10.1016/j.compscitech.2009.02.022 · Cited by 617
Crystallization and Melting Behavior of Polylactides
Sarasua, J.-R., Prud'homme, R. E., Wisniewski, M., Le Borgne, A., & Spassky, N. (1998) · Macromolecules · doi:10.1021/ma971545p · Cited by 525
The frustrated structure of poly( l -lactide)
Puiggali, J., Ikada, Y., Tsuji, H., Cartier, L., Okihara, T., & Lotz, B. (2000) · Polymer · doi:10.1016/s0032-3861(00)00235-4 · Cited by 333
Zhu, K. J., Xiangzhou, L., & Shilin, Y. (1990) · Journal of Applied Polymer Science · doi:10.1002/app.1990.070390101 · Cited by 313
Crystallization and Microstructure of Poly(l-lactide-co-meso-lactide) Copolymers
Huang, J., Lisowski, M. S., Runt, J., Hall, E. S., Kean, R. T., Buehler, N., & Lin, J. S. (1998) · Macromolecules · doi:10.1021/ma9714629 · Cited by 187
The effect of crystallinity on the deformation mechanism and bulk mechanical properties of PLLA
Renouf-Glauser, A. C., Rose, J., Farrar, D. F., & Cameron, R. E. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.03.002 · Cited by 153
Cited by
Super tough poly(lactic acid) blends: a comprehensive review
Zhao, X., Hu, H., Wang, X., Yu, X., Zhou, W., & Peng, S. (2020) · RSC Advances · doi:10.1039/d0ra01801e · Cited by 465
Supertoughened Renewable PLA Reactive Multiphase Blends System: Phase Morphology and Performance
Zhang, K., Nagarajan, V., Misra, M., & Mohanty, A. K. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am502337u · Cited by 267
Progress in Toughening Poly(Lactic Acid) with Renewable Polymers
Wang, M., Wu, Y., Li, Y.-D., & Zeng, J.-B. (2017) · Polymer Reviews · doi:10.1080/15583724.2017.1287726 · Cited by 255
Chen, H., Yu, X., Zhou, W., Peng, S., & Zhao, X. (2018) · Polymer Testing · doi:10.1016/j.polymertesting.2018.07.023 · Cited by 61
Liu, M.-J., Chen, S.-C., Yang, K.-K., & Wang, Y.-Z. (2015) · RSC Advances · doi:10.1039/c5ra04742k · Cited by 45
Wang, X., Mi, J., Wang, J., Zhou, H., & Wang, X. (2018) · RSC Advances · doi:10.1039/c8ra07510g · Cited by 39
Metadata
- Authors
- Han, L., Han, C., & Dong, L.
- Venue
- Polymer International
- Publisher
- Wiley
- Published
- 2012-06-27
- Volume
- 62
- Issue
- 2
- Pages
- 295-303
- ISSN
- 0959-8103 (ISSN-L)
- 1097-0126
- OpenAlex
- W2136655509
- Cited by
- 30
- References
- 7
- FWCI
- 2.01
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.