The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Electrostatic fiber spinning from polymer melts. I. Experimental observations on fiber formation and properties
Abstract
It is demonstrated that continuous filaments of rapidly crystallizing polymers, such as polyethylene and polypropylene, can be spun from the melt using an electric field as the only driving force. The molten polymer is fed into a metallic capillary forming a hemispherical drop at the end of the orifice. An electrical field is applied between the capillary and a conducting plate held perpendicular to the axis of the orifice. Above a critical field intensity a fine continuous jet of molten polymer is drawn; rapid crystallization ensues and a continuous fiber is formed. For fibers spun in an uncontrolled thermal environment, corresponding to ambient air temperature, and at electric field intensities of 6 and 7 kV cm−1, the properties are typically those of unoriented or slightly oriented polyolefin fibers, such as would be obtained in a conventional fiber spinning process.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Disintegration of water drops in an electric field
Taylor, G. I. (1964) · Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences · doi:10.1098/rspa.1964.0151 · Cited by 3,305
Taylor, G. I. (1969) · Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences · doi:10.1098/rspa.1969.0205 · Cited by 1,524
Instability of Electrified Liquid Surfaces
Zeleny, J. (1917) · Physical Review · doi:10.1103/physrev.10.1 · Cited by 944
Zeleny, J. (1914) · Physical Review · doi:10.1103/physrev.3.69 · Cited by 834
Oriented crystallization in polymers
Keller, A., & Machin, M. J. (1967) · Journal of Macromolecular Science, Part B · doi:10.1080/00222346708212739 · Cited by 654
Pennings, A. J., & Kiel, A. M. (1965) · Colloid & Polymer Science · doi:10.1007/bf01507982 · Cited by 469
Extensional flow‐induced crystallization in polyethylene melt spinning
Nadkarni, V. M., & Schultz, J. M. (1977) · Journal of Polymer Science Polymer Physics Edition · doi:10.1002/pol.1977.180151210 · Cited by 42
Cited by
A review on polymer nanofibers by electrospinning and their applications in nanocomposites
Huang, Z.-M., Zhang, Y.-Z., Kotaki, M., & Ramakrishna, S. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00178-7 · Cited by 7,556
Electrospinning of Nanofibers: Reinventing the Wheel?
Li, D., & Xia, Y. (2004) · Advanced Materials · doi:10.1002/adma.200400719 · Cited by 5,521
Electrospinning: A fascinating fiber fabrication technique
Bhardwaj, N., & Kundu, S. C. (2010) · Biotechnology Advances · doi:10.1016/j.biotechadv.2010.01.004 · Cited by 5,028
Electrospinning and Electrospun Nanofibers: Methods, Materials, and Applications
Xue, J., Wu, T., Dai, Y., & Xia, Y. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00593 · Cited by 5,015
Electrospinning: A Fascinating Method for the Preparation of Ultrathin Fibers
Greiner, A., & Wendorff, J. H. (2007) · Angewandte Chemie International Edition · doi:10.1002/anie.200604646 · Cited by 4,241
Metadata
- Authors
- Larrondo, L., & St. John Manley, R.
- Venue
- Journal of Polymer Science: Polymer Physics Edition
- Publisher
- Wiley
- Published
- 1981-06
- Volume
- 19
- Issue
- 6
- Pages
- 909-920
- ISSN
- 0098-1273 (ISSN-L)
- 1542-9385
- OpenAlex
- W2143160231
- Cited by
- 490
- References
- 7
- FWCI
- 1.12
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.