The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Electrostatic fiber spinning from polymer melts. I. Experimental observations on fiber formation and properties
Abstract
It is demonstrated that continuous filaments of rapidly crystallizing polymers, such as polyethylene and polypropylene, can be spun from the melt using an electric field as the only driving force. The molten polymer is fed into a metallic capillary forming a hemispherical drop at the end of the orifice. An electrical field is applied between the capillary and a conducting plate held perpendicular to the axis of the orifice. Above a critical field intensity a fine continuous jet of molten polymer is drawn; rapid crystallization ensues and a continuous fiber is formed. For fibers spun in an uncontrolled thermal environment, corresponding to ambient air temperature, and at electric field intensities of 6 and 7 kV cm−1, the properties are typically those of unoriented or slightly oriented polyolefin fibers, such as would be obtained in a conventional fiber spinning process.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Disintegration of water drops in an electric field
Taylor, G. I. (1964) · Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences · doi:10.1098/rspa.1964.0151 · Cited by 3,305
Taylor, G. I. (1969) · Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences · doi:10.1098/rspa.1969.0205 · Cited by 1,524
Instability of Electrified Liquid Surfaces
Zeleny, J. (1917) · Physical Review · doi:10.1103/physrev.10.1 · Cited by 944
Zeleny, J. (1914) · Physical Review · doi:10.1103/physrev.3.69 · Cited by 834
Oriented crystallization in polymers
Keller, A., & Machin, M. J. (1967) · Journal of Macromolecular Science, Part B · doi:10.1080/00222346708212739 · Cited by 654
Pennings, A. J., & Kiel, A. M. (1965) · Colloid & Polymer Science · doi:10.1007/bf01507982 · Cited by 469
Extensional flow‐induced crystallization in polyethylene melt spinning
Nadkarni, V. M., & Schultz, J. M. (1977) · Journal of Polymer Science Polymer Physics Edition · doi:10.1002/pol.1977.180151210 · Cited by 42
Cited by
A review on polymer nanofibers by electrospinning and their applications in nanocomposites
Huang, Z.-M., Zhang, Y.-Z., Kotaki, M., & Ramakrishna, S. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00178-7 · Cited by 7,556
Electrospinning of Nanofibers: Reinventing the Wheel?
Li, D., & Xia, Y. (2004) · Advanced Materials · doi:10.1002/adma.200400719 · Cited by 5,521
Electrospinning: A fascinating fiber fabrication technique
Bhardwaj, N., & Kundu, S. C. (2010) · Biotechnology Advances · doi:10.1016/j.biotechadv.2010.01.004 · Cited by 5,028
Electrospinning and Electrospun Nanofibers: Methods, Materials, and Applications
Xue, J., Wu, T., Dai, Y., & Xia, Y. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00593 · Cited by 5,015
Electrospinning: A Fascinating Method for the Preparation of Ultrathin Fibers
Greiner, A., & Wendorff, J. H. (2007) · Angewandte Chemie International Edition · doi:10.1002/anie.200604646 · Cited by 4,241
Nanometre diameter fibres of polymer, produced by electrospinning
Reneker, D. H., & Chun, I. (1996) · Nanotechnology · doi:10.1088/0957-4484/7/3/009 · Cited by 3,520
Electrospinning: Applications in drug delivery and tissue engineering
Sill, T. J., & von Recum, H. A. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.01.011 · Cited by 3,289
The effect of processing variables on the morphology of electrospun nanofibers and textiles
Deitzel, J. M., Kleinmeyer, J., Harris, D., & Beck Tan, N. C. (2001) · Polymer · doi:10.1016/s0032-3861(00)00250-0 · Cited by 2,915
Bending instability of electrically charged liquid jets of polymer solutions in electrospinning
Reneker, D. H., Yarin, A. L., Fong, H., & Koombhongse, S. (2000) · Journal of Applied Physics · doi:10.1063/1.373532 · Cited by 2,462
A review on electrospinning design and nanofibre assemblies
Teo, W. E., & Ramakrishna, S. (2006) · Nanotechnology · doi:10.1088/0957-4484/17/14/r01 · Cited by 2,289
Hussain, F., Hojjati, M., Okamoto, M., & Gorga, R. E. (2006) · Journal of Composite Materials · doi:10.1177/0021998306067321 · Cited by 2,227
Structure and process relationship of electrospun bioabsorbable nanofiber membranes
Zong, X., Kim, K., Fang, D., Ran, S., Hsiao, B. S., & Chu, B. (2002) · Polymer · doi:10.1016/s0032-3861(02)00275-6 · Cited by 1,893
Polymer nanofibers assembled by electrospinning
Frenot, A., & Chronakis, I. S. (2003) · Current Opinion in Colloid & Interface Science · doi:10.1016/s1359-0294(03)00004-9 · Cited by 1,324
Experimental characterization of electrospinning: the electrically forced jet and instabilities
Shin, Y. M., Hohman, M. M., Brenner, M. P., & Rutledge, G. C. (2001) · Polymer · doi:10.1016/s0032-3861(01)00540-7 · Cited by 1,070
Transport properties of porous membranes based on electrospun nanofibers
Gibson, P., Schreuder-Gibson, H., & Rivin, D. (2001) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/s0927-7757(01)00616-1 · Cited by 877
Controlled deposition of electrospun poly(ethylene oxide) fibers
Deitzel, J. (2001) · Polymer · doi:10.1016/s0032-3861(01)00336-6 · Cited by 853
Electrospun nanofibrous polyurethane membrane as wound dressing
Khil, M., Cha, D., Kim, H., Kim, I., & Bhattarai, N. (2003) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.10058 · Cited by 835
Flat polymer ribbons and other shapes by electrospinning
Koombhongse, S., Liu, W., & Reneker, D. H. (2001) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.10015 · Cited by 824
Electrohydrodynamic spraying functioning modes: a critical review
Cloupeau, M., & Prunet-Foch, B. (1994) · Journal of Aerosol Science · doi:10.1016/0021-8502(94)90199-6 · Cited by 794
Processing and microstructural characterization of porous biocompatible protein polymer thin films
Buchko, C. J., Chen, L. C., Shen, Y., & Martin, D. C. (1999) · Polymer · doi:10.1016/s0032-3861(98)00866-0 · Cited by 714
Electrospinning: A whipping fluid jet generates submicron polymer fibers
Shin, Y. M., Hohman, M. M., Brenner, M. P., & Rutledge, G. C. (2001) · Applied Physics Letters · doi:10.1063/1.1345798 · Cited by 703
Electrospinning and electrically forced jets. II. Applications
Hohman, M. M., Shin, M., Rutledge, G., & Brenner, M. P. (2001) · Physics of Fluids · doi:10.1063/1.1384013 · Cited by 698
Electrospinning versus fibre production methods: from specifics to technological convergence
Luo, C. J., Stoyanov, S. D., Stride, E., Pelan, E., & Edirisinghe, M. (2012) · Chemical Society Reviews · doi:10.1039/c2cs35083a · Cited by 691
Ultrafine fibrous cellulose membranes from electrospinning of cellulose acetate
Liu, H., & Hsieh, Y. (2002) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.10261 · Cited by 669
Polyacrylonitrile-based nanofibers—A state-of-the-art review
Nataraj, S. K., Yang, K. S., & Aminabhavi, T. M. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.07.001 · Cited by 662
Electrospinning of Nanofibers from Polymer Solutions and Melts
Reneker, D. H., Yarin, A. L., Zussman, E., & Xu, H. (2007) · Advances in Applied Mechanics · doi:10.1016/s0065-2156(07)41002-x · Cited by 630
NANOFIBROUS MATERIALS AND THEIR APPLICATIONS
Burger, C., Hsiao, B. S., & Chu, B. (2006) · Annual Review of Materials Research · doi:10.1146/annurev.matsci.36.011205.123537 · Cited by 622
Melt electrospinning today: An opportune time for an emerging polymer process
Brown, T. D., Dalton, P. D., & Hutmacher, D. W. (2016) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2016.01.001 · Cited by 542
Melt blown nanofibers: Fiber diameter distributions and onset of fiber breakup
Ellison, C. J., Phatak, A., Giles, D. W., Macosko, C. W., & Bates, F. S. (2007) · Polymer · doi:10.1016/j.polymer.2007.04.005 · Cited by 497
Electrospinning jets and nanofibrous structures
Garg, K., & Bowlin, G. L. (2011) · Biomicrofluidics · doi:10.1063/1.3567097 · Cited by 474
Townsend-Nicholson, A., & Jayasinghe, S. N. (2006) · Biomacromolecules · doi:10.1021/bm060649h · Cited by 461
Melt-electrospinning part I: processing parameters and geometric properties
Lyons, J., Li, C., & Ko, F. (2004) · Polymer · doi:10.1016/j.polymer.2004.08.071 · Cited by 401
The thermal effects on electrospinning of polylactic acid melts
Zhou, H., Green, T. B., & Joo, Y. L. (2006) · Polymer · doi:10.1016/j.polymer.2006.08.042 · Cited by 399
Modern electrostatic devices and methods for exhaust gas cleaning: A brief review
Jaworek, A., Krupa, A., & Czech, T. (2007) · Journal of Electrostatics · doi:10.1016/j.elstat.2006.07.012 · Cited by 392
Zuo, W., Zhu, M., Yang, W., Yu, H., Chen, Y., & Zhang, Y. (2005) · Polymer Engineering & Science · doi:10.1002/pen.20304 · Cited by 381
Recent advances in nanofibre fabrication techniques
Nayak, R., Padhye, R., Kyratzis, I. L., Truong, Y. B., & Arnold, L. (2012) · Textile Research Journal · doi:10.1177/0040517511424524 · Cited by 375
Green Electrospun Nanofibers and Their Application in Air Filtration
Lv, D., Zhu, M., Jiang, Z., Jiang, S., Zhang, Q., Xiong, R., & Huang, C. (2018) · Macromolecular Materials and Engineering · doi:10.1002/mame.201800336 · Cited by 375
Different electrostatic methods for making electret filters
Tsai, P. P., Schreuder-Gibson, H., & Gibson, P. (2002) · Journal of Electrostatics · doi:10.1016/s0304-3886(01)00160-7 · Cited by 373
Polymeric nanostructured materials for biomedical applications
Tang, Z., He, C., Tian, H., Ding, J., Hsiao, B. S., Chu, B., & Chen, X. (2016) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2016.05.005 · Cited by 363
Morphology of ultrafine polysulfone fibers prepared by electrospinning
Yuan, X., Zhang, Y., Dong, C., & Sheng, J. (2004) · Polymer International · doi:10.1002/pi.1538 · Cited by 358
Electrospinning of polymer melts: Phenomenological observations
Dalton, P. D., Grafahrend, D., Klinkhammer, K., Klee, D., & Möller, M. (2007) · Polymer · doi:10.1016/j.polymer.2007.09.037 · Cited by 357
Electrospun nanofibers: Internal structure and intrinsic orientation
Dersch, R., Liu, T., Schaper, A. K., Greiner, A., & Wendorff, J. H. (2003) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.10609 · Cited by 354
Statistical geometry of pores and statistics of porous nanofibrous assemblies
Eichhorn, S. J., & Sampson, W. W. (2005) · Journal of The Royal Society Interface · doi:10.1098/rsif.2005.0039 · Cited by 350
Yördem, O. S., Papila, M., & Menceloğlu, Y. Z. (2008) · Materials & Design · doi:10.1016/j.matdes.2006.12.013 · Cited by 336
Needleless Melt‐Electrospinning of Polypropylene Nanofibres
Fang, J., Zhang, L., Sutton, D., Wang, X., & Lin, T. (2012) · Journal of Nanomaterials · doi:10.1155/2012/382639 · Cited by 334
Biomedical Applications of Electrospun Nanofibers: Drug and Nanoparticle Delivery
Bhattarai, R. S., Bachu, R. D., Boddu, S. H. S., & Bhaduri, S. (2018) · Pharmaceutics · doi:10.3390/pharmaceutics11010005 · Cited by 322
Bölgen, N., Menceloğlu, Y. Z., Acatay, K., Vargel, İ., & Pişkin, E. (2005) · Journal of Biomaterials Science, Polymer Edition · doi:10.1163/156856205774576655 · Cited by 311
Hutmacher, D. W., & Dalton, P. D. (2011) · Chemistry – An Asian Journal · doi:10.1002/asia.201000436 · Cited by 301
Effects of Working Parameters on Electrospinning
Li, Z., & Wang, C. (2013) · SpringerBriefs in Materials · doi:10.1007/978-3-642-36427-3_2 · Cited by 301
Nanoprocessing of polymers: applications in medicine, sensors, catalysis, photonics
Dersch, R., Steinhart, M., Boudriot, U., Greiner, A., & Wendorff, J. H. (2005) · Polymers for Advanced Technologies · doi:10.1002/pat.568 · Cited by 287
Karim, M. R., Aijaz, M. O., Alharth, N. H., Alharbi, H. F., Al-Mubaddel, F. S., & Awual, M. R. (2019) · Ecotoxicology and Environmental Safety · doi:10.1016/j.ecoenv.2018.11.049 · Cited by 274
Nanotechnology and its applications in lignocellulosic composites, a mini review
Kamel, S. (2007) · Express Polymer Letters · doi:10.3144/expresspolymlett.2007.78 · Cited by 271
Mechanical Properties of Electrospun Fibers—A Critical Review
Rashid, T. U., Gorga, R. E., & Krause, W. E. (2021) · Advanced Engineering Materials · doi:10.1002/adem.202100153 · Cited by 268
The History of the Science and Technology of Electrospinning from 1600 to 1995
Tucker, N., Stanger, J. J., Staiger, M. P., Razzaq, H., & Hofman, K. (2012) · Journal of Engineered Fibers and Fabrics · doi:10.1177/155892501200702s10 · Cited by 267
Agarwal, S., Greiner, A., & Wendorff, J. H. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200900591 · Cited by 265
Electrospinning nanofiber scaffolds for soft and hard tissue regeneration
Xie, X., Chen, Y., Wang, X., Xu, X., Shen, Y., Khan, A. U. R., Aldalbahi, A., Fetz, A. E., Bowlin, G. L., El-Newehy, M., et al. (2020) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2020.04.037 · Cited by 264
Structure and morphology of small diameter electrospun aramid fibers
Srinivasan, G., & Reneker, D. H. (1995) · Polymer International · doi:10.1002/pi.1995.210360210 · Cited by 261
Melt Electrospinning Writing of Highly Ordered Large Volume Scaffold Architectures
Wunner, F. M., Wille, M., Noonan, T. G., Bas, O., Dalton, P. D., De‐Juan‐Pardo, E. M., & Hutmacher, D. W. (2018) · Advanced Materials · doi:10.1002/adma.201706570 · Cited by 260
Moroni, L., Licht, R., de Boer, J., de Wijn, J. R., & van Blitterswijk, C. A. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.05.027 · Cited by 254
Design and Fabrication of Fibrous Nanomaterials Using Pull Spinning
Deravi, L. F., Sinatra, N. R., Chantre, C. O., Nesmith, A. P., Yuan, H., Deravi, S. K., Goss, J. A., MacQueen, L. A., Badrossamy, M. R., Gonzalez, G. M., et al. (2017) · Macromolecular Materials and Engineering · doi:10.1002/mame.201600404 · Cited by 60
Recycling and Reutilizing Polymer Waste via Electrospun Micro/Nanofibers: A Review
Li, X., Peng, Y., Deng, Y., Ye, F., Zhang, C., Hu, X., Liu, Y., & Zhang, D. (2022) · Nanomaterials · doi:10.3390/nano12101663 · Cited by 53
Metadata
- Authors
- Larrondo, L., & St. John Manley, R.
- Venue
- Journal of Polymer Science: Polymer Physics Edition
- Publisher
- Wiley
- Published
- 1981-06
- Volume
- 19
- Issue
- 6
- Pages
- 909-920
- ISSN
- 0098-1273 (ISSN-L)
- 1542-9385
- OpenAlex
- W2143160231
- Cited by
- 490
- References
- 7
- FWCI
- 1.12
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.