Syntheses, characterization, and properties of multiblock copolymers consisting of polyisobutylene and poly(L‐lactide) segments
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
The syntheses of {‐poly(L‐lactide) (PLLA)‐b‐polyisobutylene (PIB)‐}n multiblock copolymers were accomplished for the first time by chain extension of PLLA‐b‐PIB‐b‐PLLA triblock copolymers. Well‐defined PLLA‐b‐PIB‐b‐PLLA triblock copolymers with predictable Mn s, low PDIs (1.10–1.18) and excellent blocking efficiencies were prepared by anionic ring‐opening polymerizations of L‐lactide initiated with hydroxyallyl telechelic PIB (HO‐Allyl‐PIB‐Allyl‐OH) in toluene at 110 °C. The triblock copolymers were successfully chain extended with 4,4′‐methylenebis(phenylisocyanate) (MDI) to obtain the multiblock copolymers with good gravimetric yields of ∼86 to 96%. The chain‐extended polymers were soluble in a range of common organic solvents. The block copolymers showed two glass transition temperatures in differential scanning calorimetric analysis for the PIB and PLLA blocks indicating microphase separation, which was supported by atomic force microscopy images. The as‐synthesized compression molded multiblock copolymers exhibited tensile strengths in the range of 8–24 MPa with elongations at break in the range of 2.5–400%. The static and dynamic mechanical properties showed a strong dependence on the relative PLLA content in the copolymer. The dynamic mechanical analysis also indicated microphase separation at higher PLLA compositions. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3490–3505, 2009
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Poly(lactic acid) fiber: An overview
Gupta, B., Revagade, N., & Hilborn, J. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.01.005 · Cited by 1,360
Renewable-Resource Thermoplastic Elastomers Based on Polylactide and Polymenthide
Wanamaker, C. L., O'Leary, L. E., Lynd, N. A., Hillmyer, M. A., & Tolman, W. B. (2007) · Biomacromolecules · doi:10.1021/bm700699g · Cited by 183
Biodegradable Thermoplastic Polyurethanes Incorporating Polyhedral Oligosilsesquioxane
Knight, P. T., Lee, K. M., Qin, H., & Mather, P. T. (2008) · Biomacromolecules · doi:10.1021/bm8004935 · Cited by 141
Cited by
Telechelic polymers by living and controlled/living polymerization methods
Tasdelen, M. A., Kahveci, M. U., & Yagci, Y. (2011) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.10.002 · Cited by 393
Synthesis of Poly(lactide)s with Modified Thermal and Mechanical Properties
Becker, J. M., Pounder, R. J., & Dove, A. P. (2010) · Macromolecular Rapid Communications · doi:10.1002/marc.201000088 · Cited by 146
Homo- and Block Copolymerizations of ε-Decalactone with l-Lactide Catalyzed by Lanthanum Compounds
Lin, J.-O., Chen, W., Shen, Z., & Ling, J. (2013) · Macromolecules · doi:10.1021/ma401218p · Cited by 79
Miao, X., Han, R., Tian, J., Ma, Y., Müller, A. J., & Li, Z. (2025) · Angewandte Chemie International Edition · doi:10.1002/anie.202417627 · Cited by 27
Mandlule, A., Liu, Y., Schwanz, S., Pieper, Y., Scharf, H., Iskhakova, K., Conceição, A. L. C., Wieland, D. C. F., Zeller-Plumhoff, B., Toma, F. M., et al. (2026) · Materials Advances · doi:10.1039/d5ma00886g · Cited by 6
Metadata
- Authors
- Ojha, U., Kulkarni, P., Singh, J., & Faust, R.
- Venue
- Journal of Polymer Science Part A: Polymer Chemistry
- Publisher
- Wiley
- Published
- 2009-06-04
- Volume
- 47
- Issue
- 14
- Pages
- 3490-3505
- ISSN
- 0887-624X (ISSN-L)
- 1099-0518
- OpenAlex
- W2100127018
- Cited by
- 30
- References
- 3
- FWCI
- 1.23
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Syntheses, characterization, and properties of multiblock copolymers consisting of polyisobutylene and poly(L‐lactide) segments. https://app.cochat.ai/papers/10.1002/pola.23428
- The paper
- Ojha, U., Kulkarni, P., Singh, J., & Faust, R. (2009). Syntheses, characterization, and properties of multiblock copolymers consisting of polyisobutylene and poly(L‐lactide) segments. Journal of Polymer Science Part A: Polymer Chemistry. https://doi.org/10.1002/pola.23428
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.