The mechanical properties of random copolymers of ethylene: Force‐elongation relations
The DOI matches its Crossref record; 42 of the 42 references it cites were found in a registry or an index.
Abstract
Utilizing a newly developed apparatus, force‐length measurements were performed on a series of unfractionated random ethylene copolymers having different counit types and a wide composition range. By controling crystallization conditions, crystallinity levels could be varied over wide extremes and a complete repetoire of superstructures was developed. Emphasis was on key mechanical properties such as the initial modulus, yield stress, and the ultimate properties of draw ratio at break and tensile stress. Except for the ethylene‐methacrylic acid copolymers, which behaved in a unique manner, the properties were found to be independent of the chemical nature of the counit and the particular supermolecular structure that was developed. The initial modulus and the yield stress were found to be very dependent on the crystallinity and phase structure. On the other hand, except for the decrease at low counit content, the draw ratio at break was found to be invariant with counit type, crystallinity level, supermolecular structure, and molecular weight. The results are discussed in terms of the molecular constitution of the copolymer and the structure in the crystalline state.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Young, R. J., & Lovell, P. A. (1992) · Springer eBooks · doi:10.1007/978-1-4615-3478-5 · Cited by 2,116
Studies in physical and theoretical chemistry
Bartlett, P. N. (1988) · Journal of Electroanalytical Chemistry and Interfacial Electrochemistry · doi:10.1016/0022-0728(88)85024-1 · Cited by 685
Deformation mechanisms in crystalline polymers
Bowden, P. B., & Young, R. J. (1974) · Journal of Materials Science · doi:10.1007/bf00540553 · Cited by 551
Raman spectroscopic method for determining the crystallinity of polyethylene
Strobl, G. R., & Hagedorn, W. (1978) · Journal of Polymer Science: Polymer Physics Edition · doi:10.1002/pol.1978.180160704 · Cited by 550
Molecular morphology in semicrystalline polymers
Flory, P. J., & Yoon, D. Y. (1978) · Nature · doi:10.1038/272226a0 · Cited by 489
Influence of structural and morphological factors on the mechanical properties of the polyethylenes
Popli, R., & Mandelkern, L. (1987) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.1987.090250301 · Cited by 361
Self-citationDynamic mechanical studies of α and β relaxations of polyethylenes
Popli, R., Glotin, M., Mandelkern, L., & Benson, R. S. (1984) · Journal of Polymer Science: Polymer Physics Edition · doi:10.1002/pol.1984.180220306 · Cited by 329
Self-citationThe strength and stiffness of polymers
Frank, F. C. (1970) · Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences · doi:10.1098/rspa.1970.0170 · Cited by 319
Mechanical properties of model polyethylenes: tensile elastic modulus and yield stress
Crist, B., Fisher, C. J., & Howard, P. R. (1989) · Macromolecules · doi:10.1021/ma00194a035 · Cited by 275
The Molecular Structure of Polyethylene. I. Chain Branching in Polyethylene during Polymerization1
Roedel, M. J. (1953) · Journal of the American Chemical Society · doi:10.1021/ja01120a005 · Cited by 270
Research works printed but not linked: 6
- Mandelkern L., 1988, Polym. Bull., 16, 529
- Wignall G. W., 1983, Polym. Comm., 24, 354
- Young R. J., 1988, Materials Forum, 11, 210
- Meinel G., 1970, Eur. Polym. J., 1, 657
- 10.1007/978-1-4899-3178-8 · doi:10.1007/978-1-4899-3178-8
- Mandelkern L., 1913, J. Polym. Sci., Polym. Phys. Ed., 17
Cited by
Strength and toughness of crystalline polymer systems
Galeski, A. (2003) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2003.09.003 · Cited by 614
Influence of crystal polymorphism on mechanical and barrier properties of poly(l-lactic acid)
Cocca, M., Lorenzo, M. L. D., Malinconico, M., & Frezza, V. (2011) · European Polymer Journal · doi:10.1016/j.eurpolymj.2011.02.009 · Cited by 296
“6 as a function of crystallinity, increases with crystal fraction, but not linearly, as most commonly reported for semicrystalline polymers, [33–37].”
BackgroundKrishnaswamy, R. K., Yang, Q., Fernandez-Ballester, L., & Kornfield, J. A. (2008) · Macromolecules · doi:10.1021/ma070454h · Cited by 169
Influence of α′‐/α‐crystal polymorphism on properties of poly( l ‐lactic acid)
Lorenzo, M. L. D., & Androsch, R. (2018) · Polymer International · doi:10.1002/pi.5707 · Cited by 157
Dynamic mechanical properties of metallocene catalyzed linear polyethylenes
Nitta, K., & Tanaka, A. (2001) · Polymer · doi:10.1016/s0032-3861(00)00418-3 · Cited by 146
Metadata
- Authors
- Peacock, A. J., & Mandelkern, L.
- Affiliations
- Florida State University (US)
- Venue
- Journal of Polymer Science Part B: Polymer Physics
- Publisher
- Wiley
- Published
- 1990-10
- Volume
- 28
- Issue
- 11
- Pages
- 1917-1941
- ISSN
- 0887-6266 (ISSN-L)
- 1099-0488
- OpenAlex
- W2162791340
- Cited by
- 91
- References
- 42
- Citations by year
- 2026: 1 · 2025: 1 · 2024: 2 · 2023: 4 · 2022: 1 · 2021: 1 · 2020: 3 · 2019: 2 · 2018: 4 · 2017: 1 · 2016: 3 · 2015: 2 · 2014: 3 · 2013: 4 · 2012: 3
- FWCI
- 2.67
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Journal of Polymer Science Part B Polymer Physics (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Chemical Engineering › Fluid Flow and Transfer Processes › Rheology and Fluid Dynamics Studies
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer Nanocomposites and Properties
- Keywords
- mechanical properties, crystallinity, supramolecular structure, ethylene-methacrylic acid copolymer, initial modulus, yield stress, tensile stress, molecular constitution, crystal structure, copolymer composition
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: The mechanical properties of random copolymers of ethylene: Force‐elongation relations. https://app.cochat.ai/papers/10.1002/polb.1990.090281104
- The paper
- Peacock, A. J., & Mandelkern, L. (1990). The mechanical properties of random copolymers of ethylene: Force‐elongation relations. Journal of Polymer Science Part B: Polymer Physics. https://doi.org/10.1002/polb.1990.090281104
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.