The mechanical properties of random copolymers of ethylene: Force‐elongation relations
The DOI matches its Crossref record; 42 of the 42 references it cites were found in a registry or an index.
Abstract
Utilizing a newly developed apparatus, force‐length measurements were performed on a series of unfractionated random ethylene copolymers having different counit types and a wide composition range. By controling crystallization conditions, crystallinity levels could be varied over wide extremes and a complete repetoire of superstructures was developed. Emphasis was on key mechanical properties such as the initial modulus, yield stress, and the ultimate properties of draw ratio at break and tensile stress. Except for the ethylene‐methacrylic acid copolymers, which behaved in a unique manner, the properties were found to be independent of the chemical nature of the counit and the particular supermolecular structure that was developed. The initial modulus and the yield stress were found to be very dependent on the crystallinity and phase structure. On the other hand, except for the decrease at low counit content, the draw ratio at break was found to be invariant with counit type, crystallinity level, supermolecular structure, and molecular weight. The results are discussed in terms of the molecular constitution of the copolymer and the structure in the crystalline state.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Young, R. J., & Lovell, P. A. (1992) · Springer eBooks · doi:10.1007/978-1-4615-3478-5 · Cited by 2,116
Studies in physical and theoretical chemistry
Bartlett, P. N. (1988) · Journal of Electroanalytical Chemistry and Interfacial Electrochemistry · doi:10.1016/0022-0728(88)85024-1 · Cited by 685
Deformation mechanisms in crystalline polymers
Bowden, P. B., & Young, R. J. (1974) · Journal of Materials Science · doi:10.1007/bf00540553 · Cited by 551
Raman spectroscopic method for determining the crystallinity of polyethylene
Strobl, G. R., & Hagedorn, W. (1978) · Journal of Polymer Science: Polymer Physics Edition · doi:10.1002/pol.1978.180160704 · Cited by 550
Molecular morphology in semicrystalline polymers
Flory, P. J., & Yoon, D. Y. (1978) · Nature · doi:10.1038/272226a0 · Cited by 489
Influence of structural and morphological factors on the mechanical properties of the polyethylenes
Popli, R., & Mandelkern, L. (1987) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.1987.090250301 · Cited by 361
Self-citationDynamic mechanical studies of α and β relaxations of polyethylenes
Popli, R., Glotin, M., Mandelkern, L., & Benson, R. S. (1984) · Journal of Polymer Science: Polymer Physics Edition · doi:10.1002/pol.1984.180220306 · Cited by 329
Self-citationThe strength and stiffness of polymers
Frank, F. C. (1970) · Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences · doi:10.1098/rspa.1970.0170 · Cited by 319
Mechanical properties of model polyethylenes: tensile elastic modulus and yield stress
Crist, B., Fisher, C. J., & Howard, P. R. (1989) · Macromolecules · doi:10.1021/ma00194a035 · Cited by 275
The Molecular Structure of Polyethylene. I. Chain Branching in Polyethylene during Polymerization1
Roedel, M. J. (1953) · Journal of the American Chemical Society · doi:10.1021/ja01120a005 · Cited by 270
Research works printed but not linked: 6
- Mandelkern L., 1988, Polym. Bull., 16, 529
- Wignall G. W., 1983, Polym. Comm., 24, 354
- Young R. J., 1988, Materials Forum, 11, 210
- Meinel G., 1970, Eur. Polym. J., 1, 657
- 10.1007/978-1-4899-3178-8 · doi:10.1007/978-1-4899-3178-8
- Mandelkern L., 1913, J. Polym. Sci., Polym. Phys. Ed., 17
Cited by
Strength and toughness of crystalline polymer systems
Galeski, A. (2003) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2003.09.003 · Cited by 614
Influence of crystal polymorphism on mechanical and barrier properties of poly(l-lactic acid)
Cocca, M., Lorenzo, M. L. D., Malinconico, M., & Frezza, V. (2011) · European Polymer Journal · doi:10.1016/j.eurpolymj.2011.02.009 · Cited by 296
“6 as a function of crystallinity, increases with crystal fraction, but not linearly, as most commonly reported for semicrystalline polymers, [33–37].”
BackgroundKrishnaswamy, R. K., Yang, Q., Fernandez-Ballester, L., & Kornfield, J. A. (2008) · Macromolecules · doi:10.1021/ma070454h · Cited by 169
Influence of α′‐/α‐crystal polymorphism on properties of poly( l ‐lactic acid)
Lorenzo, M. L. D., & Androsch, R. (2018) · Polymer International · doi:10.1002/pi.5707 · Cited by 157
Dynamic mechanical properties of metallocene catalyzed linear polyethylenes
Nitta, K., & Tanaka, A. (2001) · Polymer · doi:10.1016/s0032-3861(00)00418-3 · Cited by 146
Giboz, J., Copponnex, T., & Mélé, P. (2009) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/19/2/025023 · Cited by 109
Stehling, F. C., & Meka, P. (1994) · Journal of Applied Polymer Science · doi:10.1002/app.1994.070510112 · Cited by 105
CRITICAL STRAINS DETERMINING THE YIELD BEHAVIOR OF s-PP*
Men, Y., & Strobl, G. (2001) · Journal of Macromolecular Science, Part B · doi:10.1081/mb-100107561 · Cited by 103
“It is well known that room temperature elastic moduli and yield stresses of flexible chain polymers are related to the crystallinity [14,15].”
BackgroundCocca, M., Androsch, R., Righetti, M. C., Malinconico, M., & Di Lorenzo, M. L. (2014) · Journal of Molecular Structure · doi:10.1016/j.molstruc.2014.02.038 · Cited by 92
Hassan, M. K., Mauritz, K. A., Storey, R. F., & Wiggins, J. S. (2006) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.21373 · Cited by 93
Precision Vinyl Acetate/Ethylene (VAE) Copolymers by ROMP of Acetoxy-Substituted Cyclic Alkenes
Zhang, J., Matta, M. E., Martinez, H., & Hillmyer, M. A. (2013) · Macromolecules · doi:10.1021/ma400092z · Cited by 97
The three-phase structure of isotactic poly(1-butene)
Lorenzo, M. L. D., & Righetti, M. C. (2008) · Polymer · doi:10.1016/j.polymer.2008.01.026 · Cited by 85
Sahputra, I. H., & Echtermeyer, A. T. (2013) · Modelling and Simulation in Materials Science and Engineering · doi:10.1088/0965-0393/21/6/065016 · Cited by 76
The double yield in the tensile deformation of the polyethylenes
Lucas, J. C., Failla, M. D., Smith, F. L., Mandelkern, L., & Peacock, A. J. (1995) · Polymer Engineering and Science · doi:10.1002/pen.760351308 · Cited by 79
Self-citationOn the effect of crystallinity on the elastic properties of semicrystalline polyethylene
Doyle, M. J. (2000) · Polymer Engineering and Science · doi:10.1002/pen.11166 · Cited by 83
Luo, X., Xie, S., Liu, J., Hu, H., Jiang, J. H., Huang, W., Gao, H., Zhou, D., Lu, Z., & Yan, D. (2013) · Polymer Chemistry · doi:10.1039/c3py00896g · Cited by 71
A SANS study of the plastic deformation mechanism in polyethylene
Wu, W., Wignall, G. D., & Mandelkern, L. (1992) · Polymer · doi:10.1016/0032-3861(92)90617-6 · Cited by 68
Self-citationDemirors, M. (2011) · ACS symposium series · doi:10.1021/bk-2011-1080.ch009 · Cited by 85
Bartczak, Z., & Lezak, E. (2005) · Polymer · doi:10.1016/j.polymer.2005.04.092 · Cited by 68
Sierra, C. A., Galán, C., Fatou, J. G., Parellada, M. D., & Barrio, J. A. (1997) · Polymer · doi:10.1016/s0032-3861(96)01045-2 · Cited by 78
Choupin, T., Bruno Fayolle, C., Régnier, G., Paris, C., Cinquin, J., & Brulé, B. (2018) · Polymer · doi:10.1016/j.polymer.2018.08.060 · Cited by 63
Influence of the remelting process on the fatigue behavior of electron beam irradiated UHMWPE
Puértolas, J. A., Medel, F. J., Cegoñino, J., Gómez‐Barrena, E., & Ríos, R. (2005) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.30378 · Cited by 58
Kiass, N., Khelif, R., Boulanouar, L., & Chaoui, K. (2005) · Journal of Applied Polymer Science · doi:10.1002/app.21713 · Cited by 57
Tensile properties of linear low density polyethylene (LLDPE) blown films
Krishnaswamy, R. K., & Lamborn, M. J. (2000) · Polymer Engineering and Science · doi:10.1002/pen.11370 · Cited by 60
THE CHEMISTRY OF POLYETHYLENE*
Peacock, A. J. (2001) · Journal of macromolecular science. Part C, Reviews in macromolecular chemistry and physics/Journal of macromolecular science. Reviews in macromolecular chemistry and physics · doi:10.1081/mc-100107860 · Cited by 50
Self-citationSimanke, A. G., Galland, G. B., Neto, R. B., Quijada, R., & Mauler, R. S. (1999) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19991031)74:5<1093::aid-app6>3.0.co;2-c · Cited by 47
A cluster model for the polymer amorphous state
Козлов, Г. В., & Novikov, V. U. (2001) · Physics-Uspekhi · doi:10.1070/pu2001v044n07abeh000832 · Cited by 47
Some aspects of the crystallization of ethylene copolymers
Isasi, J. R., Haigh, J. A., Graham, J. T., Mandelkern, L., & Alamo, R. G. (2000) · Polymer · doi:10.1016/s0032-3861(00)00224-x · Cited by 47
Self-citationA cluster model for the polymer amorphous state
Козлов, Г. В., & Novikov, V. U. (2001) · Uspekhi Fizicheskih Nauk · doi:10.3367/ufnr.0171.200107b.0717 · Cited by 48
Frick, A., Sich, D., Heinrich, G., Stern, C., Gössi, M., & Tervoort, T. A. (2012) · Macromolecular Materials and Engineering · doi:10.1002/mame.201200172 · Cited by 46
Surface Composition of Amorphous and Crystallizable Polyethylene Blends As Measured by Static SIMS
Brant, P., Karim, A., Douglas, J. F., & Bates, F. S. (1996) · Macromolecules · doi:10.1021/ma951349n · Cited by 50
Stretching and folding of 2-nanometer hydrocarbon rods
Lüttschwager, N. O. B., & Suhm, M. A. (2014) · Soft Matter · doi:10.1039/c4sm00508b · Cited by 41
“It is largely controlled by the degree of crystallinity.(15) A single stretched polyethylene filament defines the maximum achievable elastic modulus of polyethylene material for small deformations.”
BackgroundChen, H. Y., Chum, S. P., Hiltner, A., & Baer, E. (2001) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.1130 · Cited by 42
Radiation Crosslinking of Poly(ethylene‐co‐octene) with Electron Beam Radiation
Perraud, S., Vallat, M., & Kuczyński, J. (2003) · Macromolecular Materials and Engineering · doi:10.1002/mame.200390004 · Cited by 43
Chain Microstructure, Crystallization, and Morphology of Olefinic Blocky Copolymers
Tong, Z., Huang, J., Zhou, B. Q., Xu, J., & Fan, Z. (2012) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201200615 · Cited by 39
Thermal stability of polyurethanes based on vegetable oils
Javni, I., Petrovìć, Z. S., Guo, A., & Fuller, R. (2000) · Journal of Applied Polymer Science · doi:10.1002/1097-4628(20000822)77:8<1742::aid-app11>3.0.co;2-t · Cited by 405
Effects of Liquid Paraffin on Dynamic Mechanical Properties of Linear High-Density Polyethylene
Ito, A., Hioki, K., Kono, K., Hiejima, Y., & Nitta, K. (2020) · Macromolecules · doi:10.1021/acs.macromol.0c01334 · Cited by 31
Keating, M. Y., & Lee, I.-H. (1999) · Journal of Macromolecular Science Part B · doi:10.1080/00222349908212439 · Cited by 34
Influence of thermal history on the mechanical properties of poly(ether ketone ketone) copolymers
Choupin, T., Debertrand, L., Bruno Fayolle, C., Régnier, G., Paris, C., Cinquin, J., & Brulé, B. (2019) · Polymer Crystallization · doi:10.1002/pcr2.10086 · Cited by 29
Phillips, R. A., & Nguyen, T. (2001) · Journal of Applied Polymer Science · doi:10.1002/app.1347 · Cited by 30
The brittle‐ductile transition in linear polyethylene
Mandelkern, L., Smith, F. L., Failla, M. D., Kennedy, M. A., & Peacock, A. J. (1993) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.1993.090310416 · Cited by 29
Self-citationHassan, M. K., Abou‐Hussein, R., Zhang, X., Mark, J. E., & Noda, I. (2006) · Molecular Crystals and Liquid Crystals · doi:10.1080/15421400500380028 · Cited by 30
Tong, Z., Xu, J., Xia, S., & Fan, Z. (2012) · Polymer International · doi:10.1002/pi.4288 · Cited by 24
Synthesis and Characterization of Hyperbranched Polyethylenes Made with Nickel‐α‐Diimine Catalysts
Kunrath, F. A., Mota, F. F., Casagrande, O. L., Mauler, R. S., & de Souza, R. F. (2002) · Macromolecular Chemistry and Physics · doi:10.1002/macp.200290019 · Cited by 24
Poisson, C., Hervais, V., Lacrampe, M., & Krawczak, P. (2005) · Journal of Applied Polymer Science · doi:10.1002/app.22405 · Cited by 22
Influence of wall thickness on the creep rupture performance of polyethylene pipe
Krishnaswamy, R. K. (2007) · Polymer Engineering and Science · doi:10.1002/pen.20729 · Cited by 24
The influence of the deformation temperature on the tensile properties of polyethylenes
Peacock, A. J., Mandelkern, L., Alamo, R. G., & Fatou, J. G. (1998) · Journal of Materials Science · doi:10.1023/a:1004379102567 · Cited by 23
Self-citationThe rôle of crystallinity in the deformation of main-chain liquid-crystalline copolyesters
Salahshoor-Kordestani, S., Hanna, S., & Windle, A. H. (2000) · Polymer · doi:10.1016/s0032-3861(99)00887-3 · Cited by 18
Tensile behaviour of homogeneous ethylene copolymers
Xu, X., Xu, J., & Feng, L. (2002) · Polymer International · doi:10.1002/pi.865 · Cited by 19
Isayev, А. I., & Huang, K. (2013) · Polymer Engineering and Science · doi:10.1002/pen.23827 · Cited by 18
Tuning Morphology and Melting Temperature in Polyethylene Films by MAPLE
Jeong, H., Chowdhury, M., Wang, Y., Sezen-Edmonds, M., Loo, Y., Register, R. A., Arnold, C. B., & Priestley, R. D. (2018) · Macromolecules · doi:10.1021/acs.macromol.7b02345 · Cited by 14
Abelen, A., & Kroon, M. (2023) · International Journal of Engineering Science · doi:10.1016/j.ijengsci.2023.103945 · Cited by 12
Islam, A., & Hussein, I. A. (2006) · Journal of Applied Polymer Science · doi:10.1002/app.23232 · Cited by 14
Zhao, W., Kloczkowski, A., Mark, J. E., & Erman, B. (1998) · Chemistry of Materials · doi:10.1021/cm970562q · Cited by 14
Gabriel, C., Lilge, D., & Kristen, M. O. (2003) · Macromolecular Rapid Communications · doi:10.1002/marc.200390006 · Cited by 14
An investigation of the yield behavior of ethylene-1-octene copolymer fractions
Springer, H., Hengse, A., & Hinrichsen, G. (1993) · Colloid & Polymer Science · doi:10.1007/bf00657982 · Cited by 11
Failla, M. D., Vall�s, E. M., & Lyons, B. J. (1999) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19990228)71:9<1405::aid-app6>3.0.co;2-e · Cited by 10
Mechanical properties of ethylene-α-olefin copolymers
Fatou, J. G., Maciá, I. G., Marco, C., Gómez‐Fatou, M. A., Arribas, J. M., Fontecha, A., Aroca, M., & Martínez, M. C. (1996) · Journal of Materials Science · doi:10.1007/bf00354654 · Cited by 12
Additive Effects of Solid Paraffins on Mechanical Properties of High-Density Polyethylene
Ito, A., Ropandi, A., Kono, K., Hiejima, Y., & Nitta, K. (2023) · Polymers · doi:10.3390/polym15051320 · Cited by 9
Janani, H., & Alamo, R. G. (2016) · Polymer · doi:10.1016/j.polymer.2016.08.101 · Cited by 10
Role of Crystal Thickness on the Critical Tie Molecule Fraction in Semicrystalline Polymers
Gunter, K. M., & Register, R. A. (2025) · Macromolecules · doi:10.1021/acs.macromol.5c02290 · Cited by 9
Tensile behavior of polyolefin composites: the effect of matrix parameters
Guseva, M. A., Герасин, В. А., & Shklyaruk, B. F. (2016) · Journal of Applied Polymer Science · doi:10.1002/app.43819 · Cited by 8
Yang, L., Niu, Y., Wang, H., & Wang, Z. (2008) · Polymer · doi:10.1016/j.polymer.2008.11.033 · Cited by 8
Relation between thermal effects and structural changes under deformation of thermoplastics
Анатольевна, Г. М., Герасин, В. А., Shklyaruk, B. F., & Dubinskiy, V. A. (2018) · Polymer · doi:10.1016/j.polymer.2018.04.023 · Cited by 7
Hassan, M. K., Abdel‐Latif, S. A., El‐Roudi, O. M., Sharaf, M. A., Noda, I., & Mark, J. E. (2004) · Journal of Applied Polymer Science · doi:10.1002/app.20992 · Cited by 7
Janani, H., & Alamo, R. G. (2015) · Polymer · doi:10.1016/j.polymer.2015.03.042 · Cited by 6
Shundrina, I. K., Matsko, M. A., Baskakova, K. I., Echevskaya, L. G., Nikolaeva, M. I., Shundrin, L. A., & Zakharov, V. A. (2016) · Journal of Applied Polymer Science · doi:10.1002/app.44638 · Cited by 5
Misato, N., Kida, T., Hiejima, Y., & Nitta, K. (2023) · Polymer · doi:10.1016/j.polymer.2023.126558 · Cited by 5
Expósito, M. T., Vega, J. F., & Martínez‐Salazar, J. (2007) · Journal of Applied Polymer Science · doi:10.1002/app.26797 · Cited by 5
Étude expérimentale des propriétés mécaniques et morphologiques dans un tube de gaz en HDPE-80
Kiass, N., Khelif, R., Bounamous, B., Amirat, A., & Chaoui, K. (2006) · Mécanique & Industries · doi:10.1051/meca:2006056 · Cited by 5
Mark, J. E., Ngai, K. L., Graessley, W. W., Mandelkern, L., Samulski, E. T., Koenig, J. L., & Wignall, G. D. (2004) · Cambridge University Press eBooks · doi:10.1017/cbo9781139165167.005 · Cited by 5
Self-citationKroon, M., Andreasson, E., Petersson, V., & Jutemar, E. P. (2024) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2024.112673 · Cited by 4
The Structure of Polymers Crystallized in the Bulk
Mandelkern, L. (1993) · Springer eBooks · doi:10.1007/978-94-011-1950-4_3 · Cited by 5
Self-citationSajkiewicz, P., Gradys, A., & Misztal-Faraj, B. (2010) · European Polymer Journal · doi:10.1016/j.eurpolymj.2010.07.011 · Cited by 3
Characteristic Properties and Application Development of Low-Isotacticity Polyolefins
Takebe, T., Minami, Y., & Kanai, T. (2009) · Seikei-Kakou · doi:10.4325/seikeikakou.21.202 · Cited by 3
Impact testing of high-density polyethylene structure
Kroon, M., Hagman, A., Petersson, V., Andreasson, E., Almström, M., & Jutemar, E. P. (2024) · International Journal of Impact Engineering · doi:10.1016/j.ijimpeng.2024.105033 · Cited by 4
Yang, L., Niu, Y., Wang, H., & Wang, Z. (2009) · Polymer · doi:10.1016/j.polymer.2009.04.031 · Cited by 2
Shaov, A. K., Beslaneeva, A. N., Микитаев, А. К., Shetov, R. A., & Balkizova, L. K. (2015) · Inorganic Materials Applied Research · doi:10.1134/s2075113315010141 · Cited by 2
Chen, F., Shanks, R. A., & Amarasinghe, G. (2004) · Macromolecular Materials and Engineering · doi:10.1002/mame.200300387 · Cited by 2
Crystallinity and chain stem length dependence of yield kinetics in polyethylene
Furmanski, J., Govaert, L. E., Schaefer, J. J., Throckmorton, J. A., & van Dommelen, J. A. W. (2022) · Journal of Polymer Science · doi:10.1002/pol.20220265 · Cited by 1
Stabilization of High-Density Polyethylene with Magnesium Cyclohexylphosphonate
Shaov, A. K., Хараев, А. М., & Borukaev, T. A. (2019) · Polymer Science Series D · doi:10.1134/s1995421219010180 · Cited by 1
Polyethylene — Copolymer Model Blends: Morphology and Mechanical Properties
Crist, B., & Rhee, J. (1993) · Springer eBooks · doi:10.1007/978-1-4615-2992-7_14
High Functionality with Low Crystalline Polyolefin
Okamoto, T. (2020) · Seikei-Kakou · doi:10.4325/seikeikakou.32.312
Герасин, В. А., Shklyaruk, B. F., Анатольевна, Г. М., Piryazev, A. A., Mezheumov, I. N., Иванова, А. И., & Пахомов, П. М. (2021) · Polymer Science Series A · doi:10.1134/s0965545x21030056
(2014) · Apple Academic Press eBooks · doi:10.1201/b17730-5
Numerical and Experimental Analysis of Inelastic Buckling of High-Density Polyethylene StructurePreprint
Kroon, M., Andreasson, E., Petersson, V., & Jutemar, E. P. (2023) · SSRN Electronic Journal · doi:10.2139/ssrn.4573359
Gunter, K. M., & Register, R. A. (2026) · ACS Macro Letters · doi:10.1021/acsmacrolett.6c00295
Metadata
- Authors
- Peacock, A. J., & Mandelkern, L.
- Affiliations
- Florida State University (US)
- Venue
- Journal of Polymer Science Part B: Polymer Physics
- Publisher
- Wiley
- Published
- 1990-10
- Volume
- 28
- Issue
- 11
- Pages
- 1917-1941
- ISSN
- 0887-6266 (ISSN-L)
- 1099-0488
- OpenAlex
- W2162791340
- Cited by
- 91
- References
- 42
- Citations by year
- 2026: 1 · 2025: 1 · 2024: 2 · 2023: 4 · 2022: 1 · 2021: 1 · 2020: 3 · 2019: 2 · 2018: 4 · 2017: 1 · 2016: 3 · 2015: 2 · 2014: 3 · 2013: 4 · 2012: 3
- FWCI
- 2.67
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Journal of Polymer Science Part B Polymer Physics (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Chemical Engineering › Fluid Flow and Transfer Processes › Rheology and Fluid Dynamics Studies
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer Nanocomposites and Properties
- Keywords
- mechanical properties, crystallinity, supramolecular structure, ethylene-methacrylic acid copolymer, initial modulus, yield stress, tensile stress, molecular constitution, crystal structure, copolymer composition
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.