The DOI matches its Crossref record; 23 of the 23 references it cites were found in a registry or an index.
Poly(lactic acid)/organoclay nanocomposites: Thermal, rheological properties and foam processing
Abstract
In this study, polymer nanocomposites based on poly(lactic acid) (PLA) and organically modified layered silicates (organoclay) were prepared by melt mixing in an internal mixer. The exfoliation of organoclay could be attributed to the interaction between the organoclay and PLA molecules and shearing force during mixing. The exfoliated organoclay layers acted as nucleating agents at low content and as the organoclay content increased they became physical hindrance to the chain mobility of PLA. The thermal dynamic mechanical moduli of nanocomposites were also improved by the exfoliation of organoclay; however, the improvement was reduced at high organoclay content. The dynamic rheological studies show that the nanocomposites have higher viscosity and more pronounced elastic properties than pure PLA. Both storage and loss moduli increased with silicate loading at all frequencies and showed nonterminal behavior at low frequencies. The nanocomposites and PLA were then foamed by using the mixture of CO 2 and N 2 as blowing agent in a batch foaming process. Compared with PLA foam, the nanocomposite foams exhibited reduced cell size and increased cell density at very low organoclay content. With the increase of organoclay content, the cell size was decreased and both cell density and foam density were increased. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 689–698, 2005
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Polymer/layered silicate nanocomposites: a review from preparation to processing
Sinha Ray, S., & Okamoto, M. (2003) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2003.08.002 · Cited by 6,816
Alexandre, M., & Dubois, P. (2000) · Materials Science and Engineering: R: Reports · doi:10.1016/s0927-796x(00)00012-7 · Cited by 6,377
Polymer Layered Silicate Nanocomposites
Giannelis, E. P. (1996) · Advanced Materials · doi:10.1002/adma.19960080104 · Cited by 3,479
An assessment of high voltage electron microscopy (HVEM). An invited review
Loretto, M. H., & Smallman, R. E. (1977) · Materials Science and Engineering · doi:10.1016/0025-5416(77)90085-4 · Cited by 1,655
Rheology of End-Tethered Polymer Layered Silicate Nanocomposites
Krishnamoorti, R., & Giannelis, E. P. (1997) · Macromolecules · doi:10.1021/ma960550a · Cited by 779
Effect of organoclay structure on nylon 6 nanocomposite morphology and properties
Fornes, T. D., Yoon, P. J., Hunter, D. L., Keskkula, H., & Paul, D. R. (2002) · Polymer · doi:10.1016/s0032-3861(02)00400-7 · Cited by 621
New polylactide/layered silicate nanocomposites. 1. Preparation, characterization, and properties
Sinha Ray, S., Maiti, P., Okamoto, M., Yamada, K., & Ueda, K. (2002) · Macromolecules · doi:10.1021/ma011613e · Cited by 607
Colton, J. S., & Suh, N. P. (1987) · Polymer Engineering & Science · doi:10.1002/pen.760270702 · Cited by 582
A hierarchical structure and properties of intercalated polypropylene/clay nanocomposites
Nam, P. H., Maiti, P., Okamoto, M., Kotaka, T., Hasegawa, N., & Usuki, A. (2001) · Polymer · doi:10.1016/s0032-3861(01)00512-2 · Cited by 502
Rheology of Filled Polymer Systems
Shenoy, A. V. (1999) · Springer eBooks · doi:10.1007/978-94-015-9213-0 · Cited by 501
Crystallization behaviour of poly(l-lactide)
Miyata, T., & Masuko, T. (1998) · Polymer · doi:10.1016/s0032-3861(97)10203-8 · Cited by 498
Paul, M.-A., Alexandre, M., Degée, P., Henrist, C., Rulmont, A., & Dubois, P. (2003) · Polymer · doi:10.1016/s0032-3861(02)00778-4 · Cited by 480
Handbook of polymeric foams and foam technology
Mills, N. J. (1993) · Polymer · doi:10.1016/0032-3861(93)90758-3 · Cited by 412
Chang, J., An, Y. U., & Sur, G. S. (2003) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.10349 · Cited by 410
Pluta, M., Galeski, A., Alexandre, M., Paul, M. ‐., & Dubois, P. (2002) · Journal of Applied Polymer Science · doi:10.1002/app.11309 · Cited by 367
Nucleation of microcellular foam: Theory and practice
Colton, J. S., & Suh, N. P. (1987) · Polymer Engineering & Science · doi:10.1002/pen.760270704 · Cited by 355
Foam processing and cellular structure of polypropylene/clay nanocomposites
Nam, P. H., Maiti, P., Okamoto, M., Kotaka, T., Nakayama, T., Takada, M., Ohshima, M., Usuki, A., Hasegawa, N., & Okamoto, H. (2002) · Polymer Engineering & Science · doi:10.1002/pen.11083 · Cited by 261
Solvent-Induced Crystallization of Syndiotactic Polystyrene: Thermodynamics and Morphology
Ray, B., Elhasri, S., Thierry, A., Marie, P., & Guenet, J.-M. (2002) · Macromolecules · doi:10.1021/ma0210731 · Cited by 241
Nanocomposites by melt intercalation based on polycaprolactone and organoclay
Di, Y., Iannace, S., Di Maio, E., & Nicolais, L. (2003) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.10420 · Cited by 203
Self-citationWell‐Controlled Biodegradable Nanocomposite Foams: From Microcellular to Nanocellular
Fujimoto, Y., Ray, S. S., Okamoto, M., Ogami, A., Yamada, K., & Ueda, K. (2003) · Macromolecular Rapid Communications · doi:10.1002/marc.200390068 · Cited by 196
Mechanical Properties of Plastic Foams
Chan, R. K. S., & Nakamura, M. (1969) · Journal of Cellular Plastics · doi:10.1177/0021955x6900500207 · Cited by 78
Polymer Nanocomposites: Introduction
Vaia, R. A., & Krishnamoorti, R. (2001) · ACS symposium series · doi:10.1021/bk-2002-0804.ch001 · Cited by 35
Drumright, R. E., Gruber, P. R., & Henton, D. E. (2000) · Advanced Materials · doi:10.1002/1521-4095(200012)12:23<1841::aid-adma1841>3.0.co;2-e
Cited by
Processing technologies for poly(lactic acid)
Lim, L.-T., Auras, R., & Rubino, M. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.05.004 · Cited by 2,766
SINHARAY, S., & BOUSMINA, M. (2005) · Progress in Materials Science · doi:10.1016/j.pmatsci.2005.05.002 · Cited by 1,611
Wu, F., Misra, M., & Mohanty, A. K. (2021) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2021.101395 · Cited by 909
Multifunctional nanostructured PLA materials for packaging and tissue engineering
Armentano, I., Bitinis, N., Fortunati, E., Mattioli, S., Rescignano, N., Verdejo, R., Lopez-Manchado, M. A., & Kenny, J. M. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.05.010 · Cited by 645
Nofar, M., & Park, C. B. (2014) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2014.04.001 · Cited by 531
Metadata
- Authors
- Di, Y., Iannace, S., Maio, E. D., & Nicolais, L.
- Venue
- Journal of Polymer Science Part B: Polymer Physics
- Publisher
- Wiley
- Published
- 2005-02-02
- Volume
- 43
- Issue
- 6
- Pages
- 689-698
- ISSN
- 0887-6266 (ISSN-L)
- 1099-0488
- OpenAlex
- W2105645175
- Cited by
- 257
- References
- 23
- FWCI
- 11.77
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.