The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
Polylactide/exfoliated graphite nanocomposites with enhanced thermal stability, mechanical modulus, and electrical conductivity
Abstract
We have prepared a series of polylactide/exfoliated graphite (PLA/EG) nanocomposites by melt‐compounding and investigated their morphology, structures, thermal stability, mechanical, and electrical properties. For PLA/EG nanocomposites, EG was prepared by the acid treatment and following rapid thermal expansion of micron‐sized crystalline natural graphite (NG), and it was characterized to be composed of disordered graphite nanoplatelets. It was revealed that graphite nanoplatelets of PLA/EG nanocomposites were dispersed homogeneously in the PLA matrix without forming the crystalline aggregates, unlike PLA/NG composites. Thermal degradation temperatures of PLA/EG nanocomposites increased substantially with the increment of EG content up to ∼3 wt %, whereas those of PLA/NG composites remained constant regardless of the NG content. For instance, thermal degradation temperature of PLA/EG nanocomposite with only 0.5 wt % EG was improved by ∼10 K over PLA homopolymer. Young's moduli of PLA/EG nanocomposites increased noticeably with the increment of EG content up to ∼3 wt %, compared with PLA/NG composites. The percolation threshold for electrical conduction of PLA/EG nanocomposites was found to be at 3–5 wt % EG, which is far lower graphite content than that (10–15 wt % NG) of PLA/NG composites. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 850–858, 2010
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Measurement of the Elastic Properties and Intrinsic Strength of Monolayer Graphene
Lee, C., Wei, X., Kysar, J. W., & Hone, J. (2008) · Science · doi:10.1126/science.1157996 · Cited by 20,847
Graphene-based composite materials
Stankovich, S., Dikin, D. A., Dommett, G. H. B., Kohlhaas, K. M., Zimney, E. J., Stach, E. A., Piner, R. D., Nguyen, S. T., & Ruoff, R. S. (2006) · Nature · doi:10.1038/nature04969 · Cited by 12,922
Advances in the science and technology of carbon nanotubes and their composites: a review
Thostenson, E. T., Ren, Z., & Chou, T.-W. (2001) · Composites Science and Technology · doi:10.1016/s0266-3538(01)00094-x · Cited by 5,005
Single Sheet Functionalized Graphene by Oxidation and Thermal Expansion of Graphite
McAllister, M. J., Li, J.-L., Adamson, D. H., Schniepp, H. C., Abdala, A. A., Liu, J., Herrera-Alonso, M., Milius, D. L., Car, R., Prud'homme, R. K., et al. (2007) · Chemistry of Materials · doi:10.1021/cm0630800 · Cited by 3,569
Polymer Layered Silicate Nanocomposites
Giannelis, E. P. (1996) · Advanced Materials · doi:10.1002/adma.19960080104 · Cited by 3,479
Functionalized Single Graphene Sheets Derived from Splitting Graphite Oxide
Schniepp, H. C., Li, J.-L., McAllister, M. J., Sai, H., Herrera-Alonso, M., Adamson, D. H., Prud'homme, R. K., Car, R., Saville, D. A., & Aksay, I. A. (2006) · The Journal of Physical Chemistry B · doi:10.1021/jp060936f · Cited by 3,476
Functionalized graphene sheets for polymer nanocomposites
Ramanathan, T., Abdala, A. A., Stankovich, S., Dikin, D. A., Herrera-Alonso, M., Piner, R. D., Adamson, D. H., Schniepp, H. C., Chen, X., Ruoff, R. S., et al. (2008) · Nature Nanotechnology · doi:10.1038/nnano.2008.96 · Cited by 3,470
The Halpin‐Tsai equations: A review
Affdl, J. C. H., & Kardos, J. L. (1976) · Polymer Engineering & Science · doi:10.1002/pen.760160512 · Cited by 3,071
Polymer-layered silicate nanocomposites: an overview
LeBaron, P. (1999) · Applied Clay Science · doi:10.1016/s0169-1317(99)00017-4 · Cited by 2,504
Mechanical properties of nylon 6-clay hybrid
Kojima, Y., Usuki, A., Kawasumi, M., Okada, A., Fukushima, Y., Kurauchi, T., & Kamigaito, O. (1993) · Journal of Materials Research · doi:10.1557/jmr.1993.1185 · Cited by 2,442
Verfahren zur Darstellung der Graphitsäure
Staudenmaier, L. (1898) · Berichte der deutschen chemischen Gesellschaft · doi:10.1002/cber.18980310237 · Cited by 2,032
Poly(lactic acid): plasticization and properties of biodegradable multiphase systems
Martin, O., & Avérous, L. (2001) · Polymer · doi:10.1016/s0032-3861(01)00086-6 · Cited by 1,562
Single-Walled Carbon Nanotube-Polymer Composites: Strength and Weakness
Ajayan, P. M., Schadler, L. S., Giannaris, C., & Rubio, A. (2000) · Advanced Materials · doi:10.1002/(sici)1521-4095(200005)12:10<750::aid-adma750>3.0.co;2-6 · Cited by 1,435
Large-scale production, properties and commercial applications of polylactic acid polymers
Lunt, J. (1998) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(97)00148-1 · Cited by 1,366
Big returns from small fibers: A review of polymer/carbon nanotube composites
Breuer, O., & Sundararaj, U. (2004) · Polymer Composites · doi:10.1002/pc.20058 · Cited by 1,246
Polymers containing fullerene or carbon nanotube structures
Wang, C., Guo, Z.-X., Fu, S., Wu, W., & Zhu, D. (2004) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2004.08.001 · Cited by 470
New Polylactide/Layered Silicate Nanocomposites. 3. High-Performance Biodegradable Materials
Sinha Ray, S., Yamada, K., Okamoto, M., Ogami, A., & Ueda, K. (2003) · Chemistry of Materials · doi:10.1021/cm020953r · Cited by 453
Villmow, T., Pötschke, P., Pegel, S., Häußler, L., & Kretzschmar, B. (2008) · Polymer · doi:10.1016/j.polymer.2008.06.010 · Cited by 413
Polylactones: 31. Sn(II)octoate-initiated polymerization of L-lactide: a mechanistic study
Kricheldorf, H. R., Kreiser-Saunders, I., & Boettcher, C. (1995) · Polymer · doi:10.1016/0032-3861(95)93928-f · Cited by 411
High Molecular Weight Polylactic Acid Polymers
Hartmann, M. H. (1998) · Biopolymers from Renewable Resources · doi:10.1007/978-3-662-03680-8_15 · Cited by 307
Wakabayashi, K., Pierre, C., Dikin, D. A., Ruoff, R. S., Ramanathan, T., Brinson, L. C., & Torkelson, J. M. (2008) · Macromolecules · doi:10.1021/ma071687b · Cited by 297
Exfoliation of graphite flake and its nanocomposites
Chen, G., Wu, D., Weng, W., & Wu, C. (2003) · Carbon · doi:10.1016/s0008-6223(02)00409-8 · Cited by 266
Progress in Nanocomposite of Biodegradable Polymer
Yang, K., Wang, X. L., & Wang, Y. Z. (2007) · Journal of Industrial and Engineering Chemistry · Cited by 196
Conductive mechanism of polymer/graphite conducting composites with low percolation threshold
Zou, J., Yu, Z., Pan, Y., Fang, X., & Ou, Y. (2002) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.10141 · Cited by 146
Yoon, J. T., Jeong, Y. G., Lee, S. C., & Min, B. G. (2008) · Polymers for Advanced Technologies · doi:10.1002/pat.1312 · Cited by 132
Self-citationPolylactide Based Nanostructured Biomaterials and Their Applications
Singh, S. P., & Ray, S. S. (2007) · Journal of Nanoscience and Nanotechnology · doi:10.1166/jnn.2007.909 · Cited by 99
Drumright, R. E., Gruber, P. R., & Henton, D. E. (2000) · Advanced Materials · doi:10.1002/1521-4095(200012)12:23<1841::aid-adma1841>3.0.co;2-e
Cited by
Huang, X., Qi, X., Boey, F., & Zhang, H. (2012) · Chem. Soc. Rev. · doi:10.1039/c1cs15078b · Cited by 3,837
Graphene-based polymer nanocomposites
Potts, J. R., Dreyer, D. R., Bielawski, C. W., & Ruoff, R. S. (2011) · Polymer · doi:10.1016/j.polymer.2010.11.042 · Cited by 3,123
Graphene‐Based Materials: Synthesis, Characterization, Properties, and Applications
Huang, X., Yin, Z., Wu, S., Qi, X., He, Q., Zhang, Q., Yan, Q., Boey, F., & Zhang, H. (2011) · Small · doi:10.1002/smll.201002009 · Cited by 2,569
The mechanics of graphene nanocomposites: A review
Young, R. J., Kinloch, I. A., Gong, L., & Novoselov, K. S. (2012) · Composites Science and Technology · doi:10.1016/j.compscitech.2012.05.005 · Cited by 1,294
Polylactide (PLA)-based nanocomposites
Raquez, J.-M., Habibi, Y., Murariu, M., & Dubois, P. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.05.014 · Cited by 1,209
Metadata
- Authors
- Kim, I., & Jeong, Y. G.
- Venue
- Journal of Polymer Science Part B: Polymer Physics
- Publisher
- Wiley
- Published
- 2010-03-04
- Volume
- 48
- Issue
- 8
- Pages
- 850-858
- ISSN
- 0887-6266 (ISSN-L)
- 1099-0488
- OpenAlex
- W2100046972
- Cited by
- 331
- References
- 27
- FWCI
- 16.22
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.