Application of equivalent model method to dynamic rheo‐optical properties of crystalline polymer
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
Abstract Assuming that the crystalline polymer consists of the crystalline and the non‐crystalline phase, a mechanical model for the crystalline polymer is constructed. We introduced into this model such complicated circumstances as some parts of the crystalline phase will be largely deformed under a stress concentration and other parts not so much. The temperature dependence of complex moduli of the crystalline polymers with various degrees of crystallinity is illustrated by using the model. On the basis of the model, we have derived an equation for calculating the strain‐optical coefficient of the crystalline polymer from those of the crystalline and the non‐crystalline phase. The equation gives a relation among the rheo‐optical quantities, the viscoelastic quantities and the parameters representing the fine structure and the crystallinity of the polymer. It is concluded from this equation that the strain optical coefficients cannot be expressed by such a simple additive relation as usually employed.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“By using the series-parallel model of Takayanagi et al. [131] (Figure 8) modified by Ouali et al. [132] to include the percolation approach, the mechanical behavior of these nanocomposites has been better understood.”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [131]
Citations
Cites
The Elastic and Thermo-elastic Properties of Composite Media
Kerner, E. H. (1956) · Proceedings of the Physical Society. Section B · doi:10.1088/0370-1301/69/8/305 · Cited by 1,786
The dynamic birefringence of high polymers
Stein, R. S., Onogi, S., & Keedy, D. A. (1962) · Journal of Polymer Science · doi:10.1002/pol.1962.1205716564 · Cited by 89
Viscoelastic Behavior of Polymer Blends and Its Comparison with Model Experiments
TAKAYANAGI, M., HARIMA, H., & IWATA, Y. (1963) · Journal of the Society of Materials Science, Japan · doi:10.2472/jsms.12.389 · Cited by 73
Self-citation
Research works printed but not linked: 4
- 1963, Mem. Fac. Eng. Kyushu Univ., 23, 1
- .Takayanagi M. andH.Harima Symposium of Plastics Chemistry 144th Annual Meeting American Chemical Society New York September 1963.
- Takayanagi M., 1962, Plastics (Japan), 13, 1
- Takayanagi M., 1964, Proceedings of the Fourth International Congress on Rheology 1963
Cited by
Items 101–200 of 335
Chen, P., Zhao, J., Lin, Y., Chang, J., Meng, L., Wang, D., Chen, W., Chen, L., & Li, L. (2018) · Soft Matter · doi:10.1039/c8sm02126k · Cited by 44
Righetti, M. C., Aliotta, L., Mallegni, N., Gazzano, M., Passaglia, E., Cinelli, P., & Lazzeri, A. (2019) · Frontiers in Chemistry · doi:10.3389/fchem.2019.00790 · Cited by 37
Tarani, E., Chrysafi, I., Kállay-Menyhárd, A., Pavlidou, E., Kehagias, T., Bikiaris, D. Ν., Vourlias, G., & Chrissafis, K. (2020) · Polymers · doi:10.3390/polym12081719 · Cited by 44
Righetti, M. C., Cinelli, P., Aliotta, L., Bianchi, E., Tricoli, F., Seggiani, M., & Lazzeri, A. (2021) · Polymer International · doi:10.1002/pi.6282 · Cited by 47
Melt compounding of different grades polystyrene with organoclay. Part 3: Mechanical properties
Tanoue, S., Utracki, L. A., Garcia‐Rejon, A., Tatibouët, J., & Kamal, M. R. (2005) · Polymer Engineering and Science · doi:10.1002/pen.20336 · Cited by 44
Jahanmard, P., & Shojaei, A. (2015) · RSC Advances · doi:10.1039/c5ra12458a · Cited by 43
Dagnon, K. L., Way, A. E., Carson, S. O., Silva, J., Maia, J. M., & Rowan, S. J. (2013) · Macromolecules · doi:10.1021/ma4008187 · Cited by 47
Enhanced properties of polylactide by incorporating cellulose nanocrystals
Bagheriasl, D., Carreau, P. J., Riedl, B., & Dubois, C. (2016) · Polymer Composites · doi:10.1002/pc.24259 · Cited by 47
Allen, M. J., Lien, H., Prine, N. L., Burns, C., Rylski, A. K., Gu, X., Cox, L. M., Mangolini, F., Freeman, B. D., & Page, Z. A. (2022) · Advanced Materials · doi:10.1002/adma.202210208 · Cited by 42
Cellulose Nanocrystals: A Potential Nanofiller for Food Packaging Applications
Dhar, P., Bhardwaj, U., Kumar, A., & Katiyar, V. (2014) · ACS symposium series · doi:10.1021/bk-2014-1162.ch017 · Cited by 46
Kawasaki, S., NAKAJIMA, G., Haraga, K., & Sato, C. (2015) · The Journal of Adhesion · doi:10.1080/00218464.2015.1113525 · Cited by 40
Sapkota, J., Gooneie, A., Shirole, A., & Martinez-Garcia, J. C. (2017) · Journal of Applied Polymer Science · doi:10.1002/app.45279 · Cited by 40
Kotula, A. P., & Migler, K. B. (2017) · Journal of Rheology · doi:10.1122/1.5008381 · Cited by 40
Zhao, X., Venoor, V., Koelling, K. W., Cornish, K., & Vodovotz, Y. (2018) · Journal of Applied Polymer Science · doi:10.1002/app.47334 · Cited by 39
Li, F., Gao, Y., Zhang, Y., & Jiang, W. J. (2020) · Polymer · doi:10.1016/j.polymer.2020.122237 · Cited by 39
The unfolding model for the representation of the mesophase layer in composites
Theocaris, P. S. (1985) · Journal of Applied Polymer Science · doi:10.1002/app.1985.070300214 · Cited by 39
Martín, S., Expósito, M. T., Vega, J. F., & Martínez‐Salazar, J. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.38290 · Cited by 39
Lee, M., Heo, M. H., Lee, H.-H., Kim, Y., & Shin, J. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.12.019 · Cited by 40
Modeling and simulation techniques for polymer nanoparticle composites – A review
Bernardo, L. F. A., Amaro, A. M., Pinto, D. G., & Lopes, S. M. R. (2016) · Computational Materials Science · doi:10.1016/j.commatsci.2016.02.025 · Cited by 37
Pakdel, A. S., Niinivaara, E., Cranston, E. D., Berry, R. M., & Dubé, M. A. (2020) · Macromolecular Rapid Communications · doi:10.1002/marc.202000448 · Cited by 39
Cavaillé, J. Y., Vassoille, R., Thollet, G., Rios, L., & Pichot, C. (1991) · Colloid & Polymer Science · doi:10.1007/bf00665498 · Cited by 37
Time-Temperature Superposition in Two-Phase Polyblends
Kaplan, D., & Tschoegl, N. W. (1974) · Springer eBooks · doi:10.1007/978-1-4684-2874-2_18 · Cited by 37
Li, F., Gao, Y., & Jiang, W. J. (2019) · Polymer · doi:10.1016/j.polymer.2019.03.004 · Cited by 36
Rheological behavior of a semi-crystalline polymer during isothermal crystallization
Carrot, C., Guillet, J., & Boutahar, K. (1993) · Rheologica Acta · doi:10.1007/bf00369073 · Cited by 36
Hidalgo, M., Cavaillé, J. Y., Guillot, J., Guyot, A., Pichot, C., Rios, L., & Vassoille, R. (1992) · Colloid & Polymer Science · doi:10.1007/bf01095062 · Cited by 36
Pajić‐Lijaković, I., & Milivojevic, M. S. (2018) · Seminars in Cell and Developmental Biology · doi:10.1016/j.semcdb.2018.08.002 · Cited by 35
One-Component Nanocomposites Based on Polymer-Grafted Cellulose Nanocrystals
Wohlhauser, S., Kuhnt, T., Meesorn, W., de Espinosa, L. M., Zoppe, J. O., & Weder, C. (2020) · Macromolecules · doi:10.1021/acs.macromol.9b01612 · Cited by 35
Carbon nanotube network and interphase in buckypaper nanocomposites using atomic force microscopy
Fard, M. Y. (2021) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2021.106811 · Cited by 35
Liang, X., Ito, M., & Nakajima, K. (2021) · Polymers · doi:10.3390/polym13223922 · Cited by 35
Gisario, A., Veniali, F., Barletta, M., Tagliaferri, V., & Vesco, S. (2016) · Optics and Lasers in Engineering · doi:10.1016/j.optlaseng.2016.10.010 · Cited by 35
Lin, S., Li, B., Chen, T., Yu, W., & Wang, X. (2018) · Composites Science and Technology · doi:10.1016/j.compscitech.2018.08.024 · Cited by 36
Zhao, W., Li, X., Gao, S., Feng, Y. C., & Huang, J. T. (2017) · Cellulose · doi:10.1007/s10570-017-1244-7 · Cited by 33
“The CNC percolation effect caused by such network structures may contribute to the mechanical responses when the material is under compression or tension (Eichhorn 2011; Takayanagi et al. 1964).”
Abolhasani, M. M., Arefazar, A., & Mozdianfard, M. R. (2009) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.21857 · Cited by 32
Concentration driven cocrystallisation and percolation in all-cellulose nanocomposites
Lourdin, D., Peixinho, J., Bréard, J., Cathala, B., Leroy, E., & Duchemin, B. (2015) · Cellulose · doi:10.1007/s10570-015-0805-x · Cited by 32
“(1964) for semi-crystalline polymers in order to account for the high aspect ratio of the reinforcement (Takayanagi et al. 1964).”
BackgroundPolypropylene alloys and blends with thermoplastics
Utracki, L. A., & Dumoulin, M. M. (1995) · Springer eBooks · doi:10.1007/978-94-011-0521-7_3 · Cited by 32
Muhammad, A., Srivastava, R., Koutroumanis, N., Semitekolos, D., Chiavazzo, E., Pappas, P.-N., Galiotis, C., Asinari, P., Charitidis, C. A., & Fasano, M. (2023) · Macromolecules · doi:10.1021/acs.macromol.3c01529 · Cited by 33
Stochastic multiscale multimode interlaminar fracture toughness of buckypaper nanocomposites
Fard, M. Y., & Pensky, A. (2022) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2022.107798 · Cited by 31
Kosugi, K., & Kawahara, S. (2014) · Colloid & Polymer Science · doi:10.1007/s00396-014-3396-4 · Cited by 31
“The value of complex modulus for polymeric multicomponent materials, in which phase 2 are dispersed in the matrix of phase 1, can be estimated using Takayanagi model [32, 33],”
MethodGerminiani, L. G. L., da Silva, L. C. E., Plivelic, T. S., & Gonçalves, M. D. C. (2018) · Journal of Materials Science · doi:10.1007/s10853-018-2860-9 · Cited by 33
Sessner, V., Jackstadt, A., Liebig, W. V., Kärger, L., & Weidenmann, K. A. (2019) · Journal of Composites Science · doi:10.3390/jcs3010003 · Cited by 31
“Takayangi et al. [18], introduced a model to take the contributions of the individual relaxation mechanisms for the dynamic behavior of a polyblend into account.”
Changsarn, S., Mendez, J. D., Shanmuganathan, K., Foster, E. J., Weder, C., & Supaphol, P. (2011) · Macromolecular Rapid Communications · doi:10.1002/marc.201100183 · Cited by 32
Miwa, M., Takeno, A., Hara, K., & Watanabe, A. (1995) · Composites · doi:10.1016/s0010-4361(06)80136-9 · Cited by 30
Sapkota, J., Martinez-Garcia, J. C., & Lattuada, M. (2017) · Journal of Applied Polymer Science · doi:10.1002/app.45254 · Cited by 30
Tensile creep of thermoplastics: Time‐strain superposition of non‐iso free‐volume data
Kolařík, J. (2003) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.10422 · Cited by 30
Chuang, H., & Han, C. D. (1985) · Journal of Applied Polymer Science · doi:10.1002/app.1985.070300615 · Cited by 30
Gauthier, C., Plesse, C., Vidal, F., Pelletier, J. M., Chevrot, C., & Teyssié, D. (2007) · Polymer · doi:10.1016/j.polymer.2007.10.035 · Cited by 29
Hablot, E., Boumbimba, R. M., Ahzi, S., Vaudemond, R., Ruch, D., & Avérous, L. (2009) · Composites Science and Technology · doi:10.1016/j.compscitech.2009.12.009 · Cited by 28
Peng, C., Yang, Q., Zhao, W., Ren, J., Yu, Q., Hu, Y., & Zhang, X. (2019) · Composites Science and Technology · doi:10.1016/j.compscitech.2019.04.029 · Cited by 28
Limousin, E., Rafaniello, I., Schäfer, T., Ballard, N., & Asúa, J. M. (2020) · Langmuir · doi:10.1021/acs.langmuir.9b03861 · Cited by 31
Peterson, A., Mehandzhiyski, A. Y., Svenningsson, L., Ziółkowska, A., Kádár, R., Lund, A., Sandblad, L., Evenäs, L., Re, G. L., Zozoulenko, I. V., et al. (2021) · Macromolecules · doi:10.1021/acs.macromol.0c02305 · Cited by 29
Calvão, P. S., Chenal, J., Gauthier, C., Demarquette, N. R., Bogner, A., & Cavaillé, J. Y. (2011) · Polymer International · doi:10.1002/pi.3211 · Cited by 28
Carlotti, S. J., Giani, O., & Schu�, F. (2001) · Journal of Applied Polymer Science · doi:10.1002/1097-4628(20010411)80:2<142::aid-app1082>3.0.co;2-4 · Cited by 34
A Review on Analysis of Reinforced Recycled Rubber Composites
Kabakcı, G. Ç., Aslan, Ö., & Bayraktar, E. (2022) · Journal of Composites Science · doi:10.3390/jcs6080225 · Cited by 27
The effect of interfacial dynamics on the bulk mechanical properties of rubber composites
Sugimoto, S., Inutsuka, M., Kawaguchi, D., & Tanaka, K. (2019) · Polymer Journal · doi:10.1038/s41428-019-0254-8 · Cited by 26
Young's modulus of the different crystalline phases of poly (l-lactic acid)
Jariyavidyanont, K., Yu, Q., Petzold, A., Thurn‐Albrecht, T., Glüge, R., Altenbach, H., & Androsch, R. (2022) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2022.105546 · Cited by 27
Characterization of reinforcing effect of alumina nanoparticles on the novolac phenolic resin
Etemadi, H., & Shojaei, A. (2013) · Polymer Composites · doi:10.1002/pc.22779 · Cited by 26
Reinforcing Mechanism of Cellulose Nanocrystals in Nanocomposites
Chen, Y., Gan, L., Huang, J., & Dufresne, A. (2019) · Wiley eBooks · doi:10.1002/9783527807437.ch7 · Cited by 28
Kawakami, Y., Aoki, T., & Yamashita, Y. (1986) · Polymer Journal · doi:10.1295/polymj.18.243 · Cited by 26
Discovery of island-nanomatrix structure in natural rubber
Kawahara, S. (2023) · Polymer Journal · doi:10.1038/s41428-023-00797-2 · Cited by 25
“…NR_Pr, the value of G * of the nanomatrix and that of cis -1,4-polyisoprene present in the nanomatrix are estimated by using Takayanagi ’ s model [42] (applicable to the island-nanomatrix structure) and Guth-Gold ’ s equation [43, 44] (applicable to the nanomatrix), assuming that no voids or…”
MethodViscoelasticity of multicellular surfaces
Pajić‐Lijaković, I., & Milivojevic, M. S. (2017) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2017.06.035 · Cited by 25
Mandal, S., Roy, D., Prasad, N. E., & Joshi, M. (2020) · Journal of Applied Polymer Science · doi:10.1002/app.49775 · Cited by 25
Thick Polyvinyl Alcohol Films Reinforced with Cellulose Nanocrystals for Coating Applications
Niinivaara, E., Desmaisons, J., Dufresne, A., Bras, J., & Cranston, E. D. (2021) · ACS Applied Nano Materials · doi:10.1021/acsanm.1c01244 · Cited by 25
Enhanced compatibility of SAN and PC in their blends exposed to extremely high shear field
Takahashi, H., Matsuoka, T., Ohta, T., Fukumori, K., Kurauchi, T., & Kamigaito, O. (1988) · Journal of Applied Polymer Science · doi:10.1002/app.1988.070360809 · Cited by 25
Cellulose‐polyamide 66 blends. Part II: Mechanical behavior
Ramírez, M. G., Cavaillé, J. Y., Dufresne, A., & Tékély, P. (1995) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.1995.090331502 · Cited by 25
Sharifzadeh, E., Ghasemi, I., Karrabi, M., & Azizi, H. (2014) · Iranian Polymer Journal · doi:10.1007/s13726-014-0276-1 · Cited by 24
“Equivalent box model (EBM) is used in order to simplify the assumed geometrical structure of NAS model [8, 12].”
BackgroundMethodCooperative-VBO model for polymer/graphene nanocomposites
Acar, A., Colak, O. U., Correia, J. P. M., & Ahzi, S. (2018) · Mechanics of Materials · doi:10.1016/j.mechmat.2018.06.005 · Cited by 24
Tao, W., Shen, J., Chen, Y., Liu, J., Gao, Y., Wu, Y., Zhang, L., & Tsige, M. (2018) · The Journal of Chemical Physics · doi:10.1063/1.5031114 · Cited by 23
Farahbakhsh, N., Roodposhti, P. S., Sadeghifar, H., Venditti, R. A., & Jur, J. S. (2017) · Journal of Materials Science · doi:10.1007/s10853-016-0738-2 · Cited by 23
“The Ouali model is based on the percolation approach, and Ouali et al. extended the classical phenomenological series–parallel model of Takayanagi [44, 46].”
BackgroundMathew, A. P., Groeninckx, G., Michler, G. H., Radusch, H. J., & Thomas, S. (2003) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.10506 · Cited by 23
On shift and resolution of relaxation maxima in two‐phase polymeric systems
Lipatov, Y. S., Rosovitsky, V. F., Babich, B. V., & Kvitka, N. A. (1980) · Journal of Applied Polymer Science · doi:10.1002/app.1980.070250605 · Cited by 23
Zare, Y., & Rhee, K. Y. (2022) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2021.12.082 · Cited by 22
Yong, C., Mei, C., Guan, M., Wu, Q., Sun, X., Xu, B., & Wang, K. (2017) · Journal of Applied Polymer Science · doi:10.1002/app.45896 · Cited by 22
DC breakdown strength of crosslinked polyethylene based nanocomposites at different temperatures
Wang, S., Yu, S., Xiang, J., Li, J., & Li, S. (2020) · IEEE Transactions on Dielectrics and Electrical Insulation · doi:10.1109/tdei.2019.008572 · Cited by 22
“The Takayanagi’s model based on a mechanical interpretation of the polymer with two phases (amorphous and crystalline) arranged in series and in parallel, can be applied to calculate Young’s modulus [22].”
MethodThe Young’s modulus of silica beads/epoxy composites: Experiments and simulations
Monette, L., Anderson, M. P., Wagner, H. D., & Mueller, R. R. (1994) · Journal of Applied Physics · doi:10.1063/1.356378 · Cited by 22
Engineering nanocellulose percolation network for flexible strain sensor
Wang, Q., Feng, S., Liu, J., Liu, H., Tu, W., & Zhu, Q. (2024) · Cellulose · doi:10.1007/s10570-024-05955-0 · Cited by 22
“( 1–4): (Favier et al. 1995b; Ouali et al. 1991; Takayanagi et al. 1964; Yu et al. 2017) where subscripts f , m, and c , refer to nanocellulose filler phase, matrix phase, and composite.”
Rabothata, M. S., Muthu, J., & Wegner, L. D. (2020) · Journal of Composite Materials · doi:10.1177/0021998320960774 · Cited by 21
“The focus of the current work is placed on the Ji model, which was obtained by modifying Takayanaki’s two-phase model.(41,42) Moreover, since the Ji model was developed for layered composites, careful consideration should be given if the optimization results will be used for other types composites.”
MethodMone, M., Kim, Y.-S., Darabi, S., Zokaei, S., Karlsson, L., Craighero, M., Fabiano, S., Kroon, R., & Müller, C. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c03962 · Cited by 20
Mano, J. F., Denchev, Z. Z., Nogales, A., Bruix, M., & Ezquerra, T. A. (2003) · Macromolecular Materials and Engineering · doi:10.1002/mame.200300045 · Cited by 20
Piezoelectricity in three-phase systems: Effect of the boundary phase
Ueda, H., Fukada, E., & Karasz, F. E. (1986) · Journal of Applied Physics · doi:10.1063/1.337094 · Cited by 20
Payungwong, N., Inoue, T., & Sakdapipanich, J. T. (2022) · ACS Applied Polymer Materials · doi:10.1021/acsapm.2c00979 · Cited by 19
Evaluation of Methods for Stiffness Predictions of Polymer/Clay Nanocomposites
Wang, G., Liu, H.-Y., Yu, Z., & Mai, Y. (2008) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684408090364 · Cited by 19
“[25] developed a series-parallel model to predict the modulus of a semi-crystalline polymer by:”
BackgroundPreparation and characterization of natural rubber with soft nanomatrix structure
Kosugi, K., Sutthangkul, R., Chaikumpollert, O., Yamamoto, Y., Sakdapipanich, J. T., Isono, Y., & Kawahara, S. (2012) · Colloid & Polymer Science · doi:10.1007/s00396-012-2703-1 · Cited by 19
“The decrease in the plateau modulus for DPNR-graft-PBA with the soft nanomatrix structure was found to be the same as that estimated from the moduli of NR and PBA by the following equation [8]:”
Dhar, P., Bhardwaj, U., Kumar, A., & Katiyar, V. (2015) · Polymer Composites · doi:10.1002/pc.23859 · Cited by 19
Etude expérimentale et numérique du comportement thermomecanique de matériaux réfractaires modèles
Tessier-Doyen, N. (2003) · Cited by 19
Mohammadpour-Haratbar, A., Zare, Y., Gharib, N., & Rhee, K. Y. (2023) · Surfaces and Interfaces · doi:10.1016/j.surfin.2023.102922 · Cited by 19
Zare, Y., Munir, M. T., & Rhee, K. Y. (2024) · Scientific Reports · doi:10.1038/s41598-024-73871-1 · Cited by 18
“This result does not agree with the reported results of the earlier models for the modulus of the nanocomposites 56–58 because stiffer HNTs typically yield a stiffer sample.”
ResultNozaki, S., Masuda, S., Cheng, C.-H., Nagano, C., Yokomachi, K., Kamitani, K., Aoyama, K., Masunaga, H., Kojio, K., & Takahara, A. (2019) · ACS Macro Letters · doi:10.1021/acsmacrolett.8b00994 · Cited by 18
The heterogeneity of the network structure of epoxy polymers studied by dynamic and DSC tests
Kontou, E., Spathis, G., & Theocaris, P. S. (1985) · Journal of Polymer Science Polymer Chemistry Edition · doi:10.1002/pol.1985.170230521 · Cited by 18
Gauthier, C., Sindt, O., Vigier, G., Guyot, A., Schoonbrood, H. A. S., Unzué, M. J., & Asúa, J. M. (2002) · Journal of Applied Polymer Science · doi:10.1002/app.10548 · Cited by 18
Kotaka, T., Miki, T., & Arai, K. (1980) · Journal of Macromolecular Science Part B · doi:10.1080/00222348008213126 · Cited by 18
Mazidi, M. M., Aghjeh, M. K. R., & Pegoretti, A. (2023) · Polymer · doi:10.1016/j.polymer.2023.126186 · Cited by 17
Pajić‐Lijaković, I., & Milivojevic, M. S. (2020) · European Biophysics Journal · doi:10.1007/s00249-020-01431-2 · Cited by 17
Comparison of nanocrystalline cellulose and fumed silica in latex coatings
Abitbol, T., Prevo, B. G., Galli, C., Choudhary, S., Corwin, J., Villalpando-Páez, F., Nguyen, L. C., Komarov, A., Villalobos, M. A., Veldhuis, S. C., et al. (2014) · Green Materials · doi:10.1680/gmat.14.00017 · Cited by 17
Thermal and mechanical properties of PA 12/ C 30 B nanocomposites in relationship with nanostructure
Hassan, H., Hocine, N. A., Médéric, P., Deffarges, M., & Poirot, N. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.41938 · Cited by 17
Modeling of blend-based polymer nanocomposites using a knotted approximation of Young’s modulus
Sharifzadeh, E., Ghasemi, I., & Noparvar‐Qarebagh, A. (2015) · Iranian Polymer Journal · doi:10.1007/s13726-015-0391-7 · Cited by 17
Suehiro, S., Kyu, T., Fujita, K., & Kawai, H. (1979) · Polymer Journal · doi:10.1295/polymj.11.331 · Cited by 17
Phase transformation, at the boundary layers between polymers, and solid surfaces
Theocaris, P. S. (1985) · Colloid & Polymer Science · doi:10.1007/bf01469622 · Cited by 17
Kugo, K., Hayashi, T., & Nakajima, A. (1982) · Polymer Journal · doi:10.1295/polymj.14.391 · Cited by 17
Reinforcement of poly (vinyl alcohol) films with alpha-chitin nanowhiskers
Lisboa, H. M. (2018) · Polímeros · doi:10.1590/0104-1428.07916 · Cited by 17
“The classical phenomological series-parallel model of Takayanagi et al.[37,38] that accounts for a percolating network where the fillers interact by hydrogen bonding forces above a calculated volume fraction.”
BackgroundФедотов, А. Ф. (2018) · Composites Part B Engineering · doi:10.1016/j.compositesb.2018.11.034 · Cited by 16
Metadata
- Authors
- Takayanagi, M., Uemura, S., & Minami, S.
- Affiliations
- Kyushu University (JP)
- Venue
- Journal of Polymer Science Part C: Polymer Symposia
- Publisher
- Wiley
- Published
- 1964-01
- Volume
- 5
- Issue
- 1
- Pages
- 113-122
- ISSN
- 0449-2994 (ISSN-L)
- 1935-3065
- OpenAlex
- W1975723722
- Cited by
- 323
- References
- 3
- Citations by year
- 2026: 6 · 2025: 10 · 2024: 8 · 2023: 17 · 2022: 14 · 2021: 19 · 2020: 16 · 2019: 13 · 2018: 14 · 2017: 17 · 2016: 9 · 2015: 14 · 2014: 12 · 2013: 10 · 2012: 10
- FWCI
- 0.00
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Journal of Polymer Science Part C Polymer Symposia (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Chemical Engineering › Fluid Flow and Transfer Processes › Rheology and Fluid Dynamics Studies
- Physical Sciences › Materials Science › Materials Chemistry › Material Dynamics and Properties
- Keywords
- crystalline polymers, strain-optical coefficient, equivalent model, mechanical model, complex moduli, temperature dependence, crystallinity, stress concentration, viscoelasticity, non-crystalline phase, fine structure
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.