Application of equivalent model method to dynamic rheo‐optical properties of crystalline polymer
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
Abstract Assuming that the crystalline polymer consists of the crystalline and the non‐crystalline phase, a mechanical model for the crystalline polymer is constructed. We introduced into this model such complicated circumstances as some parts of the crystalline phase will be largely deformed under a stress concentration and other parts not so much. The temperature dependence of complex moduli of the crystalline polymers with various degrees of crystallinity is illustrated by using the model. On the basis of the model, we have derived an equation for calculating the strain‐optical coefficient of the crystalline polymer from those of the crystalline and the non‐crystalline phase. The equation gives a relation among the rheo‐optical quantities, the viscoelastic quantities and the parameters representing the fine structure and the crystallinity of the polymer. It is concluded from this equation that the strain optical coefficients cannot be expressed by such a simple additive relation as usually employed.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“By using the series-parallel model of Takayanagi et al. [131] (Figure 8) modified by Ouali et al. [132] to include the percolation approach, the mechanical behavior of these nanocomposites has been better understood.”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [131]
Citations
Cites
The Elastic and Thermo-elastic Properties of Composite Media
Kerner, E. H. (1956) · Proceedings of the Physical Society. Section B · doi:10.1088/0370-1301/69/8/305 · Cited by 1,786
The dynamic birefringence of high polymers
Stein, R. S., Onogi, S., & Keedy, D. A. (1962) · Journal of Polymer Science · doi:10.1002/pol.1962.1205716564 · Cited by 89
Viscoelastic Behavior of Polymer Blends and Its Comparison with Model Experiments
TAKAYANAGI, M., HARIMA, H., & IWATA, Y. (1963) · Journal of the Society of Materials Science, Japan · doi:10.2472/jsms.12.389 · Cited by 73
Self-citation
Research works printed but not linked: 4
- 1963, Mem. Fac. Eng. Kyushu Univ., 23, 1
- .Takayanagi M. andH.Harima Symposium of Plastics Chemistry 144th Annual Meeting American Chemical Society New York September 1963.
- Takayanagi M., 1962, Plastics (Japan), 13, 1
- Takayanagi M., 1964, Proceedings of the Fourth International Congress on Rheology 1963
Cited by
Items 201–300 of 335
Ha, S., Choi, Y. T., Lee, W., Kim, Y., & Yoon, S. (2021) · Composites Part B Engineering · doi:10.1016/j.compositesb.2021.109186 · Cited by 16
Physical modeling of the electromechanical behavior of polar heterogeneous polymers
Diguet, G., Bogner, A., Chenal, J., & Cavaillé, J. Y. (2012) · Journal of Applied Physics · doi:10.1063/1.4766280 · Cited by 16
Samith, V. D., & Ramos‐Moore, E. (2014) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2014.10.009 · Cited by 15
“This effect is even more intense when chlorine atoms are substituted in the phenethyl groups allowing retaining the mobility of the backbone [27–29].”
BackgroundФедотов, А. Ф. (2018) · Composites Part B Engineering · doi:10.1016/j.compositesb.2018.07.007 · Cited by 15
Functional Epithelium Remodeling in Response to Applied Stress under In Vitro Conditions
Pajić‐Lijaković, I., & Milivojevic, M. S. (2019) · Applied Bionics and Biomechanics · doi:10.1155/2019/4892709 · Cited by 15
Faraj, H., Sollogoub, C., Guinault, A., Gervais, M., Bras, J., Salmi-Mani, H., Roger, P., Gars, M. L., & Domenek, S. (2021) · Materials Today Communications · doi:10.1016/j.mtcomm.2021.102907 · Cited by 17
Meng, Y., Gantier, M., Nguyen, T. H., Nicolaï, T., & Nicol, E. (2023) · Biomacromolecules · doi:10.1021/acs.biomac.2c01250 · Cited by 14
Polyelectrolytes for Batteries: Current State of Understanding
Maranas, J. K. (2012) · ACS symposium series · doi:10.1021/bk-2012-1096.ch001 · Cited by 14
The mechanics of biocomposites
Nicolais, L., Gloria, A., & Ambrosio, L. (2010) · Elsevier eBooks · doi:10.1533/9781845697372.3.411 · Cited by 14
Falender, J. R., Lindsey, S. E., & Saam, J. C. (1976) · Polymer Engineering and Science · doi:10.1002/pen.760160109 · Cited by 14
Morphological and Thermal Investigations of Cellulosic Bionanocomposites
Osorio‐Madrazo, A., & Laborie, M. G. (2013) · Wiley eBooks · doi:10.1002/9781118609958.ch18 · Cited by 14
Capillary flow behavior of bicomponent polymer blends
Nishimura, T. (1984) · Rheologica Acta · doi:10.1007/bf01438802 · Cited by 13
Schermann, W., & Zachmann, H. G. (1970) · Colloid & Polymer Science · doi:10.1007/bf02137397 · Cited by 13
Mohammadpour-Haratbar, A., Bouchani, Z., Zare, Y., Gharib, N., & Rhee, K. Y. (2023) · Cellulose · doi:10.1007/s10570-023-05456-6 · Cited by 12
Sharma, S., & Basu, B. (2022) · ACS Applied Polymer Materials · doi:10.1021/acsapm.2c00250 · Cited by 12
An effective medium model for the elastic moduli of fiber networks and nanocomposites
Chatterjee, A. P., & Prokhorova, D. A. (2007) · Journal of Applied Physics · doi:10.1063/1.2732437 · Cited by 12
Mechanical properties of blends of nylon with chemically modified ABS
Nelson, T. J., & Subramanian, N. (1993) · Polymer International · doi:10.1002/pi.4990320403 · Cited by 12
Grant, C. L., Hadavinia, H., Williams, N. A., & Koutsonas, S. (2025) · Science Progress · doi:10.1177/00368504251324044 · Cited by 11
“Various analytical models, including Halpin-Tsai 19 and Takayanagi, 20 have been used to calculate the modulus of reinforced polymer composites.”
Kalantari, M., McDermott, M. T., Ayranci, C., & Boluk, Y. (2020) · Journal of Applied Polymer Science · doi:10.1002/app.48942 · Cited by 11
Consequences of thermorheological complexity in viscoelastic materials
Caruthers, J. M., & Cohen, R. E. (1980) · Rheologica Acta · doi:10.1007/bf01517514 · Cited by 11
Lin, S., You, W., Yu, W., & Wang, X. (2019) · Polymer · doi:10.1016/j.polymer.2019.121820 · Cited by 11
Fraysse, J., Planès, J., Dufresne, A., & Guermache, A. (2001) · Macromolecules · doi:10.1021/ma0104377 · Cited by 11
Bauer, V. P., Hennig, J., & Schreyer, G. W. (1970) · Die Angewandte Makromolekulare Chemie · doi:10.1002/apmc.1970.050110113 · Cited by 11
Micromorphology-dependent mechanical properties of syndiotactic polystyrene
Lawrence, S. S., & Shinozaki, D. M. (1998) · Journal of Materials Science · doi:10.1023/a:1004439305449 · Cited by 11
Zare, Y., Munir, M. T., & Rhee, K. Y. (2024) · Scientific Reports · doi:10.1038/s41598-024-71573-2 · Cited by 10
Mohammadi, M., Heuzey, M., & Carreau, P. J. (2021) · Polymer Composites · doi:10.1002/pc.26332 · Cited by 11
Interface Traps and Swelling of Polypropylene Films Immersed in Silicone Oils
Ochiai, S., Itô, M., Mizutani, T., & Ieda, M. (1985) · IEEE Transactions on Electrical Insulation · doi:10.1109/tei.1985.348800 · Cited by 10
Trigui, K., Magnin, A., Putaux, J., & Boufi, S. (2025) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2025.01.016 · Cited by 10
Mohammadalipour, M., Behzad, T., Karbasi, S., & Mohammadalipour, Z. (2023) · Journal of Applied Polymer Science · doi:10.1002/app.53666 · Cited by 9
Ghasemi, S., Espahbodi, A., Gharib, N., Zare, Y., & Rhee, K. Y. (2023) · Industrial Crops and Products · doi:10.1016/j.indcrop.2023.117703 · Cited by 10
Model Composites Based on Poly(lactic acid) and Bioactive Glass Fillers for Bone Regeneration
Lacambra-Andreu, X., Dergham, N., Magallanes-Perdomo, M., Meille, S., Chevalier, J., Chenal, J., Maazouz, A., & Lamnawar, K. (2021) · Polymers · doi:10.3390/polym13172991 · Cited by 9
Mandal, S., & Alam, S. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.36735 · Cited by 9
Green hybrid composites from cellulose nanocrystal
Rahimi, S. K., & Otaigbe, J. U. (2017) · Elsevier eBooks · doi:10.1016/b978-0-08-100791-4.00004-5 · Cited by 9
Wang, K. J., Hsu, T. J., & Lee, L. J. (1989) · Polymer Engineering and Science · doi:10.1002/pen.760290608 · Cited by 9
Gao, Y., Jiang, Z., Zhang, J., Tan, H., Jin, J., & Jiang, W. J. (2025) · Polymer science & technology. · doi:10.1021/polymscitech.5c00023 · Cited by 8
Rech, J., Dorp, E. R., Michels, P., Möginger, B., & Hausnerová, B. (2022) · Scientific Reports · doi:10.1038/s41598-022-20629-2 · Cited by 8
“Substituting the strains from (12), (13) and (19) in (20), and solving for EEV yields:”
BackgroundMolinari, G., Aliotta, L., Gemmi, M., Lazzeri, A., & Righetti, M. C. (2024) · Polymer Testing · doi:10.1016/j.polymertesting.2024.108325 · Cited by 8
Effect of Cellulose Nanocrystals on the Mechanical Properties of Polymeric Composites
Dunlop, M. J., Acharya, B., & Bissessur, R. (2021) · Composites science and technology · doi:10.1007/978-981-33-4091-6_4 · Cited by 9
Polyurethane acrylate/epoxy-amine acrylate hybrid polymer networks
Jean, M., Henry, I., & Taha, M. (2000) · Journal of Applied Polymer Science · doi:10.1002/1097-4628(20000919)77:12<2678::aid-app150>3.0.co;2-9 · Cited by 8
Pritchard, C. Q., Fallon, J. J., Shelton, J., Heifferon, K. V., Weyhrich, C. W., Liu, B., Long, T. E., Foster, E. J., & Bortner, M. J. (2022) · Composites Science and Technology · doi:10.1016/j.compscitech.2022.109626 · Cited by 7
Reinforcement Efficiency of Carbon Nanotubes—Myth and Reality
Loos, M. R., & Manas‐Zloczower, I. (2014) · Elsevier eBooks · doi:10.1016/b978-1-4557-3195-4.00009-6 · Cited by 7
Suto, S. (1987) · Journal of Applied Polymer Science · doi:10.1002/app.1987.070340434 · Cited by 7
Tribut, L., Carrot, C., Fenouillot, F., & Pascault, J. P. (2008) · Rheologica Acta · doi:10.1007/s00397-008-0257-4 · Cited by 6
“Takayanagi et al. (1964) presented in Fig. 11c, which would yield the following equation:”
BackgroundHealable Supramolecular Polymeric Materials
Greenland, B. W., Fiore, G. L., Rowan, S. J., & Weder, C. (2013) · Royal Society of Chemistry eBooks · doi:10.1039/9781849737470-00092 · Cited by 9
Rheological Properties of Nanocomposites Based on Cellulose Nanofibrils and Cellulose Nanocrystals
Mavelil‐Sam, R., Deepa, B., Koshy, R. R., Mary, S. K., Pothan, L. A., & Thomas, S. (2017) · Wiley eBooks · doi:10.1002/9783527689972.ch14 · Cited by 6
Mechanical Property Enhancement of Polymer Nanocomposites
Hocine, N. A. (2010) · Wiley eBooks · doi:10.1002/9783527629275.ch6 · Cited by 6
Zare, Y., & Rhee, K. Y. (2017) · Polymers for Advanced Technologies · doi:10.1002/pat.4021 · Cited by 6
Wang, T., Wu, W., Chen, Y., Ren, W., & Qiaoling, L. (2013) · Journal of Applied Polymer Science · doi:10.1002/app.39196 · Cited by 6
Ichino, T., Takeshita, Y., & Nishi, S. (1995) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.1995.090331504 · Cited by 6
Jordan, E. F., Artymyshyn, B., & Riser, G. R. (1976) · Journal of Applied Polymer Science · doi:10.1002/app.1976.070201011 · Cited by 6
Sakurai, S., Isobe, D., Okamoto, S., & Nomura, S. (2002) · Journal of Macromolecular Science Part B · doi:10.1081/mb-120003091 · Cited by 6
Sharma, B. K., Chowdhury, S. R., Mahanwar, P. A., & Sarma, K. S. S. (2015) · Advances in Materials Physics and Chemistry · doi:10.4236/ampc.2015.59039 · Cited by 5
“This is considered as Tg (glass transition temperature) [29].”
BackgroundLinear viscoelasticity of an acrylate IPN, analysis and micromechanical modeling
Diani, J., & Strauch-Hausser, É. (2021) · Soft Matter · doi:10.1039/d1sm00808k · Cited by 6
Polymer-Cellulose Nanocrystal (CNC) Nanocomposites
Bagheriasl, D., & Carreau, P. J. (2019) · Carl Hanser Verlag GmbH & Co. KG eBooks · doi:10.1007/978-1-56990-636-1_13 · Cited by 8
Gannoruwa, A., Zhou, Y., Kosugi, K., Yamamoto, Y., & Kawahara, S. (2021) · Rubber Chemistry and Technology · doi:10.5254/rct.21.79923 · Cited by 5
Chatterjee, A. P. (2008) · Journal of Applied Physics · doi:10.1063/1.2899961 · Cited by 5
Structure‐property behavior of films containing disk spherulites: A model study
Mohajer, Y., & Wilkes, G. L. (1982) · Journal of Polymer Science Polymer Physics Edition · doi:10.1002/pol.1982.180200308 · Cited by 5
Beaudoin, O., Bergeret, A., Quantin, J.-C., & Crespy, A. (1997) · Composite Interfaces · doi:10.1163/156855498x00063 · Cited by 5
Structure-Property Interrelation of Polypropylene-Liquid Crystalline Polymer Blends
Kontou, E., Farasoglou, P., & Torres, M. L. (1998) · Journal of Reinforced Plastics and Composites · doi:10.1177/073168449801700204 · Cited by 5
Morphological investigation of cellulose nanocrystals and nanocomposite applications
Neto, W. P. F. (2017) · theses.fr (ABES) · doi:10.70675/5e807164z52c4z44b3za4c8z55787f6c7ed5 · Cited by 12
Cellulose Nanocrystals in Polymer Matrices
Simonsen, J., & Habibi, Y. (2009) · Wiley eBooks · doi:10.1002/9781444307474.ch10 · Cited by 7
Dynamic mechanical properties of particulates: Application to iron‐epoxy composites
Sideridis, E., Theocaris, P. S., & Kontou, E. (1986) · Polymer Composites · doi:10.1002/pc.750070102 · Cited by 4
Effects of mechanical drawing on gas transport in an emulsion acrylic multipolymer
El‐Hibri, M. J., & Paul, D. R. (1986) · Journal of Applied Polymer Science · doi:10.1002/app.1986.070310817 · Cited by 4
Шилько, С. В., Черноус, Д. А., Panin, S. V., & Choe, H. (2021) · Mechanics of Composite Materials · doi:10.1007/s11029-021-09942-5 · Cited by 4
Hrouz, J., Ilavský, M., & Stejskal, J. (1979) · Journal of Macromolecular Science Part B · doi:10.1080/00222347908212296 · Cited by 4
Kawahara, S. (2023) · Wiley eBooks · doi:10.1002/0471440264.pst684 · Cited by 4
Mechanically Adaptive Nanocomposites Inspired by Sea Cucumbers
Moatsou, D., & Weder, C. (2016) · Royal Society of Chemistry eBooks · doi:10.1039/9781782626664-00402 · Cited by 5
Cavallo, J., & Kasapis, S. (2025) · Food Biophysics · doi:10.1007/s11483-025-10011-w · Cited by 3
“Rheology-based blending laws have been a common approach to predict the mechanical properties of composite gels [107 ].”
Redondo, A., Bast, L. K., Djeghdi, K., Airoldi, M., Jang, D., Korley, L. T. J., Steiner, U., Bruns, N., & Gunkel, I. (2023) · Advanced Materials Interfaces · doi:10.1002/admi.202201979 · Cited by 3
Preparation and properties of biphasic hydrogels with tunable microstructures
Yang, S., Wang, Z., Meng, Y., & Wang, X. (2024) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2024.135464 · Cited by 4
K-Cakir, G., Aslan, Ö., & Bayraktar, E. (2022) · Conference proceedings of the Society for Experimental Mechanics · doi:10.1007/978-3-030-86741-6_13 · Cited by 3
Lipatov, Y. S., & Babich, V. F. (1987) · Mechanics of Composite Materials · doi:10.1007/bf00815383 · Cited by 3
Wang, H., & Chen, W. (1990) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.1990.080280913 · Cited by 3
Birefringence of filled rubbers
Hashiyama, M., & Stein, R. S. (1978) · Journal of Polymer Science Polymer Physics Edition · doi:10.1002/pol.1978.180160103 · Cited by 3
Creep behaviour of polymer blends based on epoxy matrix and intractable high Tg thermoplastic
Gauthier, C., Bonnet, A., Gaertner, R., & Sautereau, H. J. (2004) · Polymer International · doi:10.1002/pi.1430 · Cited by 3
The thermal conductivity of particulate composites by the use of a polyhedral model
Venetis, J. C., & Sideridis, E. (2017) · Colloid & Polymer Science · doi:10.1007/s00396-017-4227-1 · Cited by 2
Inoue, T. (2019) · Nihon Reoroji Gakkaishi · doi:10.1678/rheology.47.169 · Cited by 2
Pakseresht, M., Ansari, R., & Hassanzadeh‐Aghdam, M. K. (2020) · Journal of the Brazilian Society of Mechanical Sciences and Engineering · doi:10.1007/s40430-020-02709-4 · Cited by 2
Two‐phase mixture—viscoelasticity and general equivalent mechanical model
Marinov, P. (1978) · Polymer Engineering and Science · doi:10.1002/pen.760180416 · Cited by 2
Dispersed Flow of Heterogeneous Polymeric Systems
Han, C. D. (1981) · Elsevier eBooks · doi:10.1016/b978-0-12-322460-6.50010-8 · Cited by 2
Thermoplastic Cellulose Nanocomposites
Karimi, S. (2017) · Wiley eBooks · doi:10.1002/9783527689972.ch5 · Cited by 2
Radiation Polymerized Graft Copolymers for Leather
Buechler, P. R., Kronick, P. L., & Scholnick, F. (1986) · Springer eBooks · doi:10.1007/978-1-4613-2205-4_20 · Cited by 2
Adhesion of Polymer Blends. I. Phenomenological Model
Babich, V. F., & Lipatov, Y. S. (1995) · The Journal of Adhesion · doi:10.1080/00218469508009978 · Cited by 2
ONOGI, S., Asada, T., HIRAI, M., & KAMEYAMA, K. (1965) · Journal of the Society of Materials Science Japan · doi:10.2472/jsms.14.322 · Cited by 2
Influence of crystallinity change on creep properties due to thermal history for polypropylene
Isaki, T., Kanemura, S., Nakada, M., Miyano, Y., Morisawa, Y., & Uzawa, K. (2025) · Mechanics of Time-Dependent Materials · doi:10.1007/s11043-025-09836-2 · Cited by 1
“The Takayanagi model (Takayanagi et al. 1963, 1964) is one two-phase model used to predict viscoelastic properties of crystalline polymers, which can control the series and parallel contributions by parameters.”
Kim, H., Kim, H., & Kim, T. (2025) · Applied Physics Letters · doi:10.1063/5.0299612 · Cited by 1
“While such thermal conductivity enhancements have been typically interpreted using effective medium models [189–191], debate has existed concerning the origin of the high thermal conductivity, particularly for highly oriented polymers [192, 193].”
Gebremeskel, S. A., Bhalla, N. A., Chouhan, H., & Bhatnagar, N. (2018) · Momona Ethiopian Journal of Science · doi:10.4314/mejs.v10i1.3 · Cited by 1
Structure and Properties of Natural Rubber
Kawahara, S. (2018) · NIPPON GOMU KYOKAISHI · doi:10.2324/gomu.91.143 · Cited by 1
Pajić‐Lijaković, I., & Milivojevic, M. S. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-820310-1.00002-1 · Cited by 1
Pouyanmehr, R., Pakseresht, M., Ansari, R., & Hassanzadeh‐Aghdam, M. K. (2021) · Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science · doi:10.1177/09544062211003607 · Cited by 1
Feijani, E. A., & Rezakazemi, M. (2023) · Journal of Applied Polymer Science · doi:10.1002/app.54101 · Cited by 1
Jang, Y. J., Kim, J.-S., & Park, S. (2025) · Macromolecular Research · doi:10.1007/s13233-025-00414-6 · Cited by 1
The embedded single-fibre dynamic load test — a new non-destructive interphase investigation tool
Meretz, S., Lahser, K., Lehmann, V., Schwarze, H., & Hampe, A. (1994) · Composites · doi:10.1016/0010-4361(94)90214-3 · Cited by 1
Martin, C. (2015) · theses.fr (ABES) · doi:10.70675/525af2d2zb75bz43e4za64dz102ec6113aa7 · Cited by 7
Nanocellulose based materials for Cell Culture
Smyth, M. (2017) · theses.fr (ABES) · doi:10.70675/7f9368f5zece3z448bzae8dz8cd541137802 · Cited by 4
Moud, A. A. (2022) · Preprints.org · doi:10.20944/preprints202211.0414.v1 · Cited by 1
Gassiot-Talabot, A. (2015) · theses.fr (ABES) · doi:10.70675/e76aded9zacc1z4af8zaec7z7705d3c846b8 · Cited by 2
Nébouy, M. (2020) · theses.fr (ABES) · doi:10.70675/a822dec8z3b29z4cd0zb2eeza6db7472d25d · Cited by 4
Study on Morphology and Properties of Natural Rubber with Nanomatrix Structure
小杉, 健. (2014) · Institutional Repositories DataBase (IRDB)
Viscoelasticity of polymeric composites containing dispersed and fibrous fillers
Lipatov, Y. S. (1981) · Mechanics of Composite Materials · doi:10.1007/bf00610179
Metadata
- Authors
- Takayanagi, M., Uemura, S., & Minami, S.
- Affiliations
- Kyushu University (JP)
- Venue
- Journal of Polymer Science Part C: Polymer Symposia
- Publisher
- Wiley
- Published
- 1964-01
- Volume
- 5
- Issue
- 1
- Pages
- 113-122
- ISSN
- 0449-2994 (ISSN-L)
- 1935-3065
- OpenAlex
- W1975723722
- Cited by
- 323
- References
- 3
- Citations by year
- 2026: 6 · 2025: 10 · 2024: 8 · 2023: 17 · 2022: 14 · 2021: 19 · 2020: 16 · 2019: 13 · 2018: 14 · 2017: 17 · 2016: 9 · 2015: 14 · 2014: 12 · 2013: 10 · 2012: 10
- FWCI
- 0.00
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Journal of Polymer Science Part C Polymer Symposia (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Chemical Engineering › Fluid Flow and Transfer Processes › Rheology and Fluid Dynamics Studies
- Physical Sciences › Materials Science › Materials Chemistry › Material Dynamics and Properties
- Keywords
- crystalline polymers, strain-optical coefficient, equivalent model, mechanical model, complex moduli, temperature dependence, crystallinity, stress concentration, viscoelasticity, non-crystalline phase, fine structure
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.