The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
A rough TOPSIS Approach for Failure Mode and Effects Analysis in Uncertain Environments: A FMEA Approach Based on Rough TOPSIS in Uncertain Environments
Abstract
This study aims at improving the effectiveness of failure mode and effect analysis (FMEA) technique. FMEA is a widely used technique for identifying and eliminating known or potential failures from system, design, and process. However, in conventional FMEA, risk factors of Severity (S), Occurrence (O), and Detection difficulty (D) are simply multiplied to obtain a crisp risk priority number without considering the subjectivity and vagueness in decision makers’ judgments. Besides, the weights for risk factors S, O, and D are also ignored. As a result, the effectiveness and accuracy of the FMEA are affected. To solve this problem, a novel FMEA approach for obtaining a more rational rank of failure modes is proposed. Basically, two stages of evaluation process are described: the determination of risk factors’ weights and ranking the risk for the failure modes. A rough group ‘Technique for Order Performance by Similarity to Ideal Solution’ (TOPSIS) method is used to evaluate the risk of failure mode. The novel approach integrates the strength of rough set theory in handling vagueness and the merit of TOPSIS in modeling multi-criteria decision making. Finally, an application in steam valve system is provided to demonstrate the potential of the methodology under vague and subjective environment. Copyright © 2013 John Wiley & Sons, Ltd.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fuzzy logic prioritization of failures in a system failure mode, effects and criticality analysis
Bowles, J. B., & Peláez, C. E. (1995) · Reliability Engineering & System Safety · doi:10.1016/0951-8320(95)00068-d · Cited by 687
Risk evaluation in failure mode and effects analysis using fuzzy weighted geometric mean
Wang, Y.-M., Chin, K.-S., Poon, G. K. K., & Yang, J.-B. (2009) · Expert Systems with Applications · doi:10.1016/j.eswa.2007.11.028 · Cited by 630
Modified failure mode and effects analysis using approximate reasoning
Pillay, A., & Wang, J. (2003) · Reliability Engineering & System Safety · doi:10.1016/s0951-8320(02)00179-5 · Cited by 581
Cited by
Liu, H.-C., You, J.-X., You, X.-Y., & Shan, M.-M. (2015) · Applied Soft Computing · doi:10.1016/j.asoc.2014.11.036 · Cited by 377
Fattahi, R., & Khalilzadeh, M. (2018) · Safety Science · doi:10.1016/j.ssci.2017.10.018 · Cited by 367
Improving Risk Evaluation in FMEA With Cloud Model and Hierarchical TOPSIS Method
Liu, H.-C., Wang, L.-E., Li, Z., & Hu, Y.-P. (2019) · IEEE Transactions on Fuzzy Systems · doi:10.1109/tfuzz.2018.2861719 · Cited by 351
Pamučar, D., Petrović, I., & Ćirović, G. (2018) · Expert Systems with Applications · doi:10.1016/j.eswa.2017.08.042 · Cited by 349
Application of GIS-Interval Rough AHP Methodology for Flood Hazard Mapping in Urban Areas
Gigović, L., Pamučar, D., Bajić, Z., & Drobnjak, S. (2017) · Water · doi:10.3390/w9060360 · Cited by 341
Metadata
- Authors
- Song, W., Ming, X., Wu, Z., & Zhu, B.
- Venue
- Quality and Reliability Engineering International
- Publisher
- Wiley
- Published
- 2013-02-07
- Volume
- 30
- Issue
- 4
- Pages
- 473-486
- ISSN
- 0748-8017 (ISSN-L)
- OpenAlex
- W1607841559
- Cited by
- 227
- References
- 3
- FWCI
- 10.43
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A rough TOPSIS Approach for Failure Mode and Effects Analysis in Uncertain Environments: A FMEA Approach Based on Rough TOPSIS in Uncertain Environments. https://app.cochat.ai/papers/10.1002/qre.1500
- The paper
- Song, W., Ming, X., Wu, Z., & Zhu, B. (2014). A rough TOPSIS Approach for Failure Mode and Effects Analysis in Uncertain Environments: A FMEA Approach Based on Rough TOPSIS in Uncertain Environments. Quality and Reliability Engineering International. https://doi.org/10.1002/qre.1500
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.