The DOI matches its Crossref record; 15 of the 15 references it cites were found in a registry or an index.
Continuous flow 2 H/ 1 H and 18 O/ 16 O analysis of water samples with dual inlet precision
Abstract
A method for isotope ratio analysis of water samples is described comprising an on‐line high‐temperature reduction technique in a helium carrier gas. Using a gas‐tight syringe, injection of 0.5 to 1 μL sample is made through a heated septum into a glassy carbon reactor at temperatures in excess of 1300°C. More than 150 injections can be made per day and both isotope ratios of interest, δ 2 H and δ 18 O, can be measured with the same setup. The technique has the capability to transfer high‐precision stable isotope ratio analysis of water samples from a specialized to a routine laboratory task compatible with other common techniques (automated injection for GC, LC, etc.). Experiments with an emphasis on the reactor design were made in two different laboratories using two different commercially available high‐temperature elemental analyser (EA) systems. In the Jena TC/EA unit, sample‐to‐sample memory (single injection) has been reduced to ∼1% and high precision of about 0.1‰ for δ 18 O and < 1‰ for δ 2 H has been achieved by a redesign of the glassy carbon reactor and by redirecting the gas flow of the commercial TC/EA unit. With the modified reactor, the contact of water vapour with surfaces other than glassy carbon is avoided completely. The carrier gas is introduced at the bottom of the reactor thereby flushing the outer tube compartment of the tube‐in‐tube assembly before entering the active heart of the reactor. With the Leipzig high‐temperature reactor (HTP) similar precision was obtained with a minor modification (electropolishing) of the injector metal sleeve. With this system, the temperature dependence of the reaction has been studied between 1100 and 1450°C. Complete yield and constant isotope ratio information has been observed only for temperatures above 1325°C. For temperatures above 1300°C the reactor produces an increasing amount of CO background from reaction of glass carbon with the ceramic tube. This limits the usable temperature to a maximum of 1450°C. Relevant gas permeation through the Al 2 O 3 walls has not been detected up to 1600°C. Copyright © 2004 John Wiley & Sons, Ltd.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Reporting of stable hydrogen, carbon, and oxygen isotopic abundances (Technical Report)
Coplen, T. B. (1994) · Pure and Applied Chemistry · doi:10.1351/pac199466020273 · Cited by 856
Hilkert, A. W., Douthitt, C. B., Schlüter, H. J., & Brand, W. A. (1999) · Rapid Communications in Mass Spectrometry · doi:10.1002/(sici)1097-0231(19990715)13:13<1226::aid-rcm575>3.0.co;2-9 · Cited by 308
Self-citationConFlo III - an interface for high precision δ13C and δ15N analysis with an extended dynamic range
Werner, R. A., Bruch, B. A., & Brand, W. A. (1999) · Rapid Communications in Mass Spectrometry · doi:10.1002/(sici)1097-0231(19990715)13:13<1237::aid-rcm633>3.0.co;2-c · Cited by 244
Self-citationQuantitative Production of H2 by Pyrolysis of Gas Chromatographic Effluents
Burgoyne, T. W., & Hayes, J. M. (1998) · Analytical Chemistry · doi:10.1021/ac980248v · Cited by 231
On-line δ18O measurement of organic and inorganic substances
Kornexl, B. E., Gehre, M., Höfling, R., & Werner, R. A. (1999) · Rapid Communications in Mass Spectrometry · doi:10.1002/(sici)1097-0231(19990830)13:16<1685::aid-rcm699>3.0.co;2-9 · Cited by 227
Self-citationFarquhar, G. D., Henry, B. K., & Styles, J. M. (1997) · Rapid Communications in Mass Spectrometry · doi:10.1002/(sici)1097-0231(199709)11:14<1554::aid-rcm980>3.0.co;2-i · Cited by 160
Isotope-ratio-monitoring gas chromatography-mass spectrometry: methods for isotopic calibration
Merritt, D. A., Brand, W. A., & Hayes, J. M. (1994) · Organic Geochemistry · doi:10.1016/0146-6380(94)90003-5 · Cited by 127
Self-citationHigh‐temperature elemental analysis and pyrolysis techniques for stable isotope analysis
Gehre, M., & Strauch, G. (2003) · Rapid Communications in Mass Spectrometry · doi:10.1002/rcm.1076 · Cited by 126
Self-citationCompound-specific isotope analysis: extending toward and
Brand, W. A., Tegtmeyer, A. R., & Hilkert, A. W. (1994) · Organic Geochemistry · doi:10.1016/0146-6380(94)90004-3 · Cited by 124
Self-citationIsotope Ratio Mass Spectrometric Method for the On-line Determination of Oxygen-18 in Organic Matter
Koziet, J. (1997) · Journal of Mass Spectrometry · Cited by 111
On-line determination of δ18O values of organic substances
Werner, R. A., Kornexl, B. E., Roβmann, A., & Schmidt, H.-L. (1996) · Analytica Chimica Acta · doi:10.1016/0003-2670(95)00468-8 · Cited by 108
Self-citationThe Online 18O/ 16O Analysis: Development and application
Werner, R. A. (2003) · Isotopes in Environmental and Health Studies · doi:10.1080/1025601031000108642 · Cited by 65
Self-citationKelly, S. D., Parker, I., Sharman, M., & Dennis, M. J. (1998) · Journal of Mass Spectrometry · Cited by 44
Standardization for oxygen isotope ratio measurement - still an unsolved problem
Kornexl, B. E., Werner, R. A., & Gehre, M. (1999) · Rapid Communications in Mass Spectrometry · doi:10.1002/(sici)1097-0231(19990715)13:13<1248::aid-rcm560>3.0.co;2-h · Cited by 35
Self-citationBrand, W. A., & Coplen, T. B. (2001) · Fresenius Journal of Analytical Chemistry · doi:10.1007/s002160100814 · Cited by 30
Self-citation
Cited by
Hydrogen and oxygen isotope ratios in human hair are related to geography
Ehleringer, J. R., Bowen, G. J., Chesson, L. A., West, A. G., Podlesak, D. W., & Cerling, T. E. (2008) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0712228105 · Cited by 384
Kreuzer-Martin, H. W., Ehleringer, J. R., & Hegg, E. L. (2005) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0506531102 · Cited by 78
Ensuring the reliability of stable isotope ratio data—beyond the principle of identical treatment
Carter, J. F., & Fry, B. (2013) · Analytical and Bioanalytical Chemistry · doi:10.1007/s00216-012-6551-0 · Cited by 71
Leuenberger, M. C., & Filot, M. S. (2007) · Rapid Communications in Mass Spectrometry · doi:10.1002/rcm.2998 · Cited by 37
Metadata
- Authors
- Gehre, M., Geilmann, H., Richter, J., Werner, R. A., & Brand, W. A.
- Venue
- Rapid Communications in Mass Spectrometry
- Publisher
- Wiley
- Published
- 2004-10-12
- Volume
- 18
- Issue
- 22
- Pages
- 2650-2660
- ISSN
- 0951-4198 (ISSN-L)
- 1097-0231
- OpenAlex
- W1986789727
- Cited by
- 258
- References
- 15
- FWCI
- 10.71
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.