The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Electrochemical Sensors and Biosensors Based on Graphene Functionalized with Metal Oxide Nanostructures for Healthcare Applications
Abstract
Graphene has attracted wide consideration in recent years to the assembly of sensitive sensors and biosensors due to its unique and remarkable physical and electrochemical properties. Moreover, graphene, as an essential two‐dimensional carbon material with remarkably high quartz and electronic superiority, has also received significant research attention. This review presents the different synthesis techniques of graphene; graphene functionalized based electrochemical sensors and biosensors for various health care appellations. Further, were discussed on the basis of enhanced catalytic activity, improved detection limit in conjunction with sensitivity, and selectivity. Synergistic action of graphene and metal oxide nanostructure has contributed towards high activity as a biosensing material. The results with different sensors and biosensors for the detection of significant biomarkers such as protein sensor, electrochemical immune sensor, phytochrome sensor, cholesterol biosensor glucose, hydrogen peroxide, and nicotinamide adenine dinucleotide detection sensor etc., and highlighted the use of graphene and functionalized graphene in different sensing platforms. Finally, the challenges related to less aggregated graphene‐based electrochemical sensors and biosensors as well as future research directions are discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Two-dimensional gas of massless Dirac fermions in graphene
Novoselov, K. S., Geim, A. K., Morozov, S. V., Jiang, D., Katsnelson, M. I., Grigorieva, I. V., Dubonos, S. V., & Firsov, A. A. (2005) · Nature · doi:10.1038/nature04233 · Cited by 21,611
Luo, J., Cote, L. J., Tung, V. C., Tan, A. T. L., Goins, P. E., Wu, J., & Huang, J. (2010) · Journal of the American Chemical Society · doi:10.1021/ja1078943 · Cited by 389
Cited by
Recent advances in the design of colorimetric sensors for environmental monitoring
Liu, B., Zhuang, J., & Wei, G. (2020) · Environmental Science: Nano · doi:10.1039/d0en00449a · Cited by 482
Arabi, M., Ostovan, A., Zhang, Z., Wang, Y., Mei, R., Fu, L., Wang, X., Ma, J., & Chen, L. (2021) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2020.112825 · Cited by 404
Recent advances in carbon nanomaterials-based electrochemical sensors for food azo dyes detection
Karimi-Maleh, H., Beitollahi, H., Senthil Kumar, P., Tajik, S., Mohammadzadeh Jahani, P., Karimi, F., Karaman, C., Vasseghian, Y., Baghayeri, M., Rouhi, J., et al. (2022) · Food and Chemical Toxicology · doi:10.1016/j.fct.2022.112961 · Cited by 367
Saleh, H. M., & Hassan, A. I. (2023) · Sustainability · doi:10.3390/su151410891 · Cited by 328
Nanomaterials for Healthcare Biosensing Applications
Pirzada, M., & Altintas, Z. (2019) · Sensors · doi:10.3390/s19235311 · Cited by 253
Metadata
- Authors
- Kumar, S., Bukkitgar, S. D., Singh, S., Pratibha, Singh, V., Reddy, K. R., Shetti, N. P., Venkata Reddy, C., Sadhu, V., & Naveen, S.
- Venue
- ChemistrySelect
- Publisher
- Wiley
- Published
- 2019-05-14
- Volume
- 4
- Issue
- 18
- Pages
- 5322-5337
- ISSN
- 2365-6549 (ISSN-L)
- OpenAlex
- W2945109889
- Cited by
- 209
- References
- 2
- FWCI
- 11.63
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Electrochemical Sensors and Biosensors Based on Graphene Functionalized with Metal Oxide Nanostructures for Healthcare Applications. https://app.cochat.ai/papers/10.1002/slct.201803871
- The paper
- Kumar, S., Bukkitgar, S. D., Singh, S., Pratibha, Singh, V., Reddy, K. R., Shetti, N. P., Venkata Reddy, C., Sadhu, V., & Naveen, S. (2019). Electrochemical Sensors and Biosensors Based on Graphene Functionalized with Metal Oxide Nanostructures for Healthcare Applications. ChemistrySelect. https://doi.org/10.1002/slct.201803871
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
