The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
Vertically Oriented 2D Layered Perovskite Solar Cells with Enhanced Efficiency and Good Stability
Abstract
Vertically oriented highly crystalline 2D layered (BA)2(MA)n−1 PbnI 3n+1 (BA = CH 3(CH 2)3 NH 3, MA = CH 3 NH 3, n = 3, 4) perovskite thin‐films are fabricated with the aid of ammonium thiocyanate (NH 4 SCN) additive through one‐step spin‐coating process. The humidity‐stability of the film is certified by the almost unchanged X‐ray diffraction patterns after exposed to humid atmosphere (Hr = 55 ± 5%) for 40 d. The photovoltaic devices with the structure of indium tin oxide(ITO)/poly(3,4‐ethylenedioxythiophene):poly(styrene‐sulfonate)/(BA)2(MA)n−1 PbnI 3n+1(n = 3,4)/[6,6]‐phenyl‐C 61‐butyric acid methyl ester/Bathocuproine/Ag are fabricated. The devices based on (BA)2(MA)2 Pb 3 I 10 perovskite (n = 3) with the precursor composition of BAI:methylammonium iodide:PbI 2:NH 4 SCN = 2:2:3:1 (by molar ratio) show an averaged power conversion efficiency (PCE) of 6.82%. In the case of (BA)2(MA)3 Pb 4 I 13 (n = 4), a higher PCE of 8.79% is achieved. Both of the unsealed devices perform unique stability with almost unchanged PCE during the period of storage in purified N 2 glove box. This work provides a simple and effective method to enhance the efficiency of the 2D perovskite solar cell.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Efficient planar heterojunction perovskite solar cells by vapour deposition
Liu, M., Johnston, M. B., & Snaith, H. J. (2013) · Nature · doi:10.1038/nature12509 · Cited by 7,976
Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723
Self-citationEperon, G. E., Stranks, S. D., Menelaou, C., Johnston, M. B., Herz, L. M., & Snaith, H. J. (2014) · Energy & Environmental Science · doi:10.1039/c3ee43822h · Cited by 4,140
Metal-halide perovskites for photovoltaic and light-emitting devices
Stranks, S. D., & Snaith, H. J. (2015) · Nature Nanotechnology · doi:10.1038/nnano.2015.90 · Cited by 3,392
Lead-free organic–inorganic tin halide perovskites for photovoltaic applications
Noel, N. K., Stranks, S. D., Abate, A., Wehrenfennig, C., Guarnera, S., Haghighirad, A.-A., Sadhanala, A., Eperon, G. E., Pathak, S. K., Johnston, M. B., et al. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01076k · Cited by 2,746
Efficient and stable large-area perovskite solar cells with inorganic charge extraction layers
Chen, W., Wu, Y., Yue, Y., Liu, J., Zhang, W., Yang, X., Chen, H., Bi, E., Ashraful, I., Grätzel, M., et al. (2015) · Science · doi:10.1126/science.aad1015 · Cited by 2,279
Self-citation2D Homologous Perovskites as Light-Absorbing Materials for Solar Cell Applications
Cao, D. H., Stoumpos, C. C., Farha, O. K., Hupp, J. T., & Kanatzidis, M. G. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b03796 · Cited by 2,158
A Layered Hybrid Perovskite Solar‐Cell Absorber with Enhanced Moisture Stability
Smith, I. C., Hoke, E. T., Solis‐Ibarra, D., McGehee, M. D., & Karunadasa, H. I. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201406466 · Cited by 2,011
Growth of CH3NH3PbI3 cuboids with controlled size for high-efficiency perovskite solar cells
Im, J.-H., Jang, I.-H., Pellet, N., Grätzel, M., & Park, N.-G. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.181 · Cited by 1,759
Xiao, Z., Dong, Q., Bi, C., Shao, Y., Yuan, Y., & Huang, J. (2014) · Advanced Materials · doi:10.1002/adma.201401685 · Cited by 1,703
Organic–inorganic hybrid lead halide perovskites for optoelectronic and electronic applications
Zhao, Y., & Zhu, K. (2016) · Chemical Society Reviews · doi:10.1039/c4cs00458b · Cited by 1,661
Liang, P., Liao, C., Chueh, C., Zuo, F., Williams, S. T., Xin, X., Lin, J., & Jen, A. K. ‐. (2014) · Advanced Materials · doi:10.1002/adma.201400231 · Cited by 1,452
Ligand-Stabilized Reduced-Dimensionality Perovskites
Quan, L. N., Yuan, M., Comin, R., Voznyy, O., Beauregard, E. M., Hoogland, S., Buin, A., Kirmani, A. R., Zhao, K., Amassian, A., et al. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.5b11740 · Cited by 1,436
Li, X., Ibrahim Dar, M., Yi, C., Luo, J., Tschumi, M., Zakeeruddin, S. M., Nazeeruddin, M. K., Han, H., & Grätzel, M. (2015) · Nature Chemistry · doi:10.1038/nchem.2324 · Cited by 1,183
Thin-Film Preparation and Characterization of Cs3Sb2I9: A Lead-Free Layered Perovskite Semiconductor
Saparov, B., Hong, F., Sun, J.-P., Duan, H.-S., Meng, W., Cameron, S., Hill, I. G., Yan, Y., & Mitzi, D. B. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b01989 · Cited by 812
Mitzi, D. B., Chondroudis, K., & Kagan, C. R. (2001) · IBM Journal of Research and Development · doi:10.1147/rd.451.0029 · Cited by 714
Zuo, L., Gu, Z., Ye, T., Fu, W., Wu, G., Li, H., & Chen, H. (2015) · Journal of the American Chemical Society · doi:10.1021/ja512518r · Cited by 676
Self-citationKe, W., Xiao, C., Wang, C., Saparov, B., Duan, H., Zhao, D., Xiao, Z., Schulz, P., Harvey, S. P., Liao, W., et al. (2016) · Advanced Materials · doi:10.1002/adma.201600594 · Cited by 579
Zhao, Y., & Zhu, K. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp502696w · Cited by 555
Huang, C., Fu, W., Li, C.-Z., Zhang, Z., Qiu, W., Shi, M., Heremans, P., Jen, A. K.-Y., & Chen, H. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b00039 · Cited by 489
Self-citationZhou, Y., Yang, M., Wu, W., Vasiliev, A. L., Zhu, K., & Padture, N. P. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta00477b · Cited by 436
An 80.11% FF record achieved for perovskite solar cells by using the NH4Cl additive
Zuo, C., & Ding, L. (2014) · Nanoscale · doi:10.1039/c4nr02425g · Cited by 385
Controllable Perovskite Crystallization by Water Additive for High‐Performance Solar Cells
Gong, X., Li, M., Shi, X., Ma, H., Wang, Z., & Liao, L. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201503559 · Cited by 366
Solution-processed inorganic semiconductors
Mitzi, D. B. (2004) · Journal of Materials Chemistry · doi:10.1039/b403482a · Cited by 341
HPbI3: A New Precursor Compound for Highly Efficient Solution‐Processed Perovskite Solar Cells
Wang, F., Yu, H., Xu, H., & Zhao, N. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201404007 · Cited by 316
Pseudohalide‐Induced Moisture Tolerance in Perovskite CH3NH3Pb(SCN)2I Thin Films
Jiang, Q., Rebollar, D., Gong, J., Piacentino, E. L., Zheng, C., & Xu, T. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201503038 · Cited by 310
Nanostructuring Mixed‐Dimensional Perovskites: A Route Toward Tunable, Efficient Photovoltaics
Koh, T. M., Shanmugam, V., Schlipf, J., Oesinghaus, L., Müller‐Buschbaum, P., Ramakrishnan, N., Swamy, V., Mathews, N., Boix, P. P., & Mhaisalkar, S. G. (2016) · Advanced Materials · doi:10.1002/adma.201506141 · Cited by 271
Chen, J., Rong, Y., Mei, A., Xiong, Y., Liu, T., Sheng, Y., Jiang, P., Hong, L., Guan, Y., Zhu, X., et al. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502009 · Cited by 185
The roles of alkyl halide additives in enhancing perovskite solar cell performance
Chueh, C., Liao, C., Zuo, F., Williams, S. T., Liang, P., & Jen, A. K. ‐. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta05012f · Cited by 156
Li, G., Zhang, T., & Zhao, Y. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta06172e · Cited by 120
Cited by
Understanding of perovskite crystal growth and film formation in scalable deposition processes
Liu, C., Cheng, Y.-B., & Ge, Z. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00711c · Cited by 675
Advances in two-dimensional organic–inorganic hybrid perovskites
Zhang, F., Lu, H., Tong, J., Berry, J. J., Beard, M. C., & Zhu, K. (2020) · Energy & Environmental Science · doi:10.1039/c9ee03757h · Cited by 627
Dion-Jacobson Phase 2D Layered Perovskites for Solar Cells with Ultrahigh Stability
Ahmad, S., Fu, P., Yu, S., Yang, Q., Liu, X., Wang, X., Wang, X., Guo, X., & Li, C. (2019) · Joule · doi:10.1016/j.joule.2018.11.026 · Cited by 615
Surface Passivation Using 2D Perovskites toward Efficient and Stable Perovskite Solar Cells
Wu, G., Liang, R., Ge, M., Sun, G., Zhang, Y., & Xing, G. (2022) · Advanced Materials · doi:10.1002/adma.202105635 · Cited by 531
Self-citationEnhanced Charge Transport in 2D Perovskites via Fluorination of Organic Cation
Zhang, F., Kim, D. H., Lu, H., Park, J.-S., Larson, B. W., Hu, J., Gao, L., Xiao, C., Reid, O. G., Chen, X., et al. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.9b00972 · Cited by 382
Metadata
- Authors
- Zhang, X., Wu, G., Yang, S., Fu, W., Zhang, Z., Chen, C., Liu, W., Yan, J., Yang, W., & Chen, H.
- Venue
- Small
- Publisher
- Wiley
- Published
- 2017-07-10
- Volume
- 13
- Issue
- 33
- ISSN
- 1613-6810 (ISSN-L)
- 1613-6829
- OpenAlex
- W2735830284
- Cited by
- 256
- References
- 33
- FWCI
- 13.76
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.