An End‐to‐End Steel Strip Surface Defects Recognition System Based on Convolutional Neural Networks
The DOI matches its Crossref record; 21 of the 21 references it cites were found in a registry or an index.
Abstract
Steel strip surface defects recognition is very important to steel strip production and quality control, which needs further improvement. In this paper, an end‐to‐end surface defects recognition system is proposed for steel strip surface inspection. This system is based on the symmetric surround saliency map for surface defects detection and deep convolutional neural networks (CNNs) which directly use the defect image as input and defect category as output for seven classes of steel strip defects classification. The CNNs are trained purely on raw defect images and learned defect features from the training of network, which avoiding the separation between feature extraction and image classification, so that forms an end‐to‐end defects recognition pipeline. To further illustrate the superiority of the defect recognition methods with CNNs, an authoritative and standard steel strip surface defect dataset − NEU is also used to evaluate the defect recognition effect using CNNs. Experimental results demonstrate that the proposed methods perform well in steel strip surface defect detection of different types and achieve a high recognition rate for defect images. In addition, a series of data augmentation methods are discussed to analyze its effect on avoiding over‐fitting for defects recognition.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Yi.L., Li.G., Jiang M. [31] 114x114 1.3 ms 99% 7”
From Real-time system for automatic cold strip surface defect detection (2019) · cites this paper as [31]
In the citing paper
“their model gets a better accuracy at 99.05%.”
From A Compact Convolutional Neural Network for Surface Defect Inspection (2020) · cites this paper as [2]
In the citing paper
“Their work proves that data augmentation on this dataset is crucial for performance improvement”
From A Compact Convolutional Neural Network for Surface Defect Inspection (2020) · cites this paper as [2]
Citations
Cites
(2014) · Cited by 33,419
Learning Internal Representations by Error Propagation
Rumelhart, D. E., Hinton, G. E., & Williams, R. J. (1985) · doi:10.21236/ada164453 · Cited by 16,172
CNN Features Off-the-Shelf: An Astounding Baseline for Recognition
Razavian, A. S., Azizpour, H., Sullivan, J., & Carlsson, S. (2014) · 2014 IEEE Conference on Computer Vision and Pattern Recognition Workshops · doi:10.1109/cvprw.2014.131 · Cited by 4,451
Frequency-tuned salient region detection
Achanta, R., Hemami, S., Estrada, F., & Susstrunk, S. (2009) · 2009 IEEE Conference on Computer Vision and Pattern Recognition · doi:10.1109/cvpr.2009.5206596 · Cited by 4,167
Practical Recommendations for Gradient-Based Training of Deep Architectures
Bengio, Y. (2012) · Lecture Notes in Computer Science · doi:10.1007/978-3-642-35289-8_26 · Cited by 2,259 · cited 1×
“; ðxm; ymÞg of m training samples, we trained our neural network by leveraging batch gradient descent,([23]) the overall cost function is defined as follows:”
MethodSong, K., & Yan, Y. (2013) · Applied Surface Science · doi:10.1016/j.apsusc.2013.09.002 · Cited by 1,026
Saliency detection using maximum symmetric surround
Achanta, R., & Susstrunk, S. (2010) · 2010 IEEE International Conference on Image Processing · doi:10.1109/icip.2010.5652636 · Cited by 384
Steel defect classification with Max-Pooling Convolutional Neural Networks
Masci, J., Meier, U., Ciresan, D., Schmidhuber, J., & Fricout, G. (2012) · The 2012 International Joint Conference on Neural Networks (IJCNN) · doi:10.1109/ijcnn.2012.6252468 · Cited by 345
Review of vision-based steel surface inspection systems
Neogi, N., Mohanta, D. K., & Dutta, P. K. (2014) · EURASIP Journal on Image and Video Processing · doi:10.1186/1687-5281-2014-50 · Cited by 322
An intelligent real-time vision system for surface defect detection
Jia, H., Murphey, Y. L., Shi, J., & Chang, T.-S. (2004) · Proceedings of the 17th International Conference on Pattern Recognition, 2004. ICPR 2004. · doi:10.1109/icpr.2004.1334512 · Cited by 174
Research works printed but not linked: 5
- Xu X. R., 2010, Jisuanji Yingyong/J. Comput. Appl, 30, 2247
- Krizhevsky A., 2012, Adv. Neural Inf. Process. Syst, 25, 2012
- Song K., 2013, Math. Prob. Eng, 2013, 1
- Ciresan D., 2012, Eprint Arxiv, 157, 3642
- Srivastava N., 2014, J. Mach. Learn. Res, 15, 1929
Cited by
Items 101–172 of 172
Redford, J., & Mullany, B. A. (2023) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2023.08.002 · Cited by 11
Fine-Tuning Convolutional Neural Network Based Railway Damage Detection
Aydın, A., Salur, M. U., & Aydın, İ. (2021) · IEEE EUROCON - International Conference on Computer as a Tool (EUROCON) · doi:10.1109/eurocon52738.2021.9535585 · Cited by 13
Steel surface defects analysis with machine vision and deep learning
Frydrych, K., Tomczak, M., Jasinski, J. J., & Papanikolaou, S. (2025) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-025-16539-y · Cited by 15
“Figures17, 18, 20, and 21 show the histograms modified by diversities included in the E-NEU dataset for pitted surface, inclusion, crazing, scratches, and rolled-in scale.”
Multi-class classification method for steel surface defects with feature noise
Chu, M., Feng, Y., Yang, Y., & Deng, X. (2020) · Journal of Iron and Steel Research International · doi:10.1007/s42243-020-00501-1 · Cited by 8
Liu, Z., Guo, Z., Li, C., Huang, N., & Gao, C. (2023) · IET Image Processing · doi:10.1049/ipr2.12935 · Cited by 10
A High-Quality Sample Generation Method for Improving Steel Surface Defect Inspection
He, Y., Li, S., Wen, X., & Xu, J. (2024) · Sensors · doi:10.3390/s24082642 · Cited by 11
“For example, the works [16,17] designed small scale CNNs and the work in [18] simplified the benchmark CNN models.”
MethodAn ESG-ConvNeXt network for steel surface defect classification based on hybrid attention mechanism
Zhang, N., Liu, Z., Zhang, E., Chen, Y., & Yue, J. (2025) · Scientific Reports · doi:10.1038/s41598-025-88958-6 · Cited by 19
Deformable Feature Pyramid Network for Aluminum Profile Surface Defect Detection
Wang, J., & Meng, Z. (2020) · Journal of Physics Conference Series · doi:10.1088/1742-6596/1544/1/012074 · Cited by 9
Yan, X., & Gao, L. (2020) · Mathematical Biosciences & Engineering · doi:10.3934/mbe.2020290 · Cited by 8
S2D2Net: An Improved Approach For Robust Steel Surface Defects Diagnosis With Small Sample Learning
Nath, V., & Chattopadhyay, C. (2021) · Proceedings - International Conference on Image Processing · doi:10.1109/icip42928.2021.9506405 · Cited by 10
Liu, L., Chu, M., Gong, R., & Qi, X. (2020) · Journal of Iron and Steel Research International · doi:10.1007/s42243-020-00499-6 · Cited by 8
Effective Bi-decoding networks for rail-surface defect detection by knowledge distillation
Zhou, W., Wu, Y., Qiu, W., Xu, C., & Qiang, F. (2024) · Applied Soft Computing · doi:10.1016/j.asoc.2024.112422 · Cited by 7
Lei, J., Wang, J., Li, Y., Zhang, M., Zhao, R., & Sun, H. (2025) · Measurement Science and Technology · doi:10.1088/1361-6501/aded2b · Cited by 9
“To reduce dependency on manual feature design, Yi et al [12] proposed a proposed a cascaded framework integrating symmetric surround saliency maps with deep CNNs.”
Self-citationIntelligent recognition of steel plate surface defect based on deep convolutional GAN
Jiang, B., Zhou, P., Sun, X., & Chai, T. (2025) · Neural Computing and Applications · doi:10.1007/s00521-025-11007-w · Cited by 8
Complex surface ROI detection for steel plate fusing the gray image and 3D depth information
Wen, X., Song, K., Huang, L., Niu, M., & Yan, Y. (2019) · Optik · doi:10.1016/j.ijleo.2019.163313 · Cited by 9
A Semi-Supervised Deep Learning Approach for the Classification of Steel Surface Defects
Mayuravaani, M., & Manivannan, S. (2021) · International Conference on Information and Automation for Sustainability (ICIAfS) · doi:10.1109/iciafs52090.2021.9606143 · Cited by 9
Steel surface defect detection algorithm based on improved YOLOv10
Zhang, L., Wang, Z., Ma, Y., & Li, G. (2025) · Scientific Reports · doi:10.1038/s41598-025-16725-8 · Cited by 15
“Yi et al. 21 introduced an approach that segments faulty regions using a symmetric surrounded saliency mechanism, combined with a CNN.”
Self-citationAşar, E., & Özgür, A. (2024) · Engineering materials · doi:10.1007/978-3-031-57468-9_3 · Cited by 11
Chang, J., Qiao, Z., Wang, Q., Kong, X., & Yuan, Y. (2022) · Micromachines · doi:10.3390/mi13060860 · Cited by 7
Üzen, H., Türkoğlu, M., Arı, A., & Hanbay, D. (2022) · Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi · doi:10.17341/gazimmfd.1024425 · Cited by 8
A Tiny Defect Detection System for Tire Mold Surfaces Based on Consecutive Frames
Lin, Y.-H., & Ruan, S.-J. (2023) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2023.3252632 · Cited by 6
Wei, C., & Song, Z. (2023) · Sensors · doi:10.3390/s23125415 · Cited by 6
Zhou, Y. X., Wu, H., Wang, Y., Liu, X., Zhai, X., Sun, K., Zheng, Z., Tian, C., Zhao, H., Jia, W., et al. (2025) · Measurement · doi:10.1016/j.measurement.2024.116639 · Cited by 6
An effective method for small objects detection based on MDFFAM and LKSPP
Xu, Z., Xu, Y., & Wang, M. (2024) · Scientific Reports · doi:10.1038/s41598-024-60745-9 · Cited by 8
ASAFPN:An End-to-End Defect Detector With Adaptive Spatial Attention Method
Ouyang, S. S., Li, Y., Cao, M. S., & Chen, C. (2021) · Journal of Physics Conference Series · doi:10.1088/1742-6596/1820/1/012113 · Cited by 4
“At present, many deep learning methods[8][9] have been applied to automatic defect inspection.”
MethodSelf-citationSurface defect detection using deep learning
Piwal, H., Dhokale, M., Biswas, R., Raut, S., & Malge, A. (2023) · AIP conference proceedings · doi:10.1063/5.0129207 · Cited by 4
Classification of Surface Defects in Steel Sheets Using Developed NasNet-Mobile CNN and Few Samples
Kateb, Y., Khebli, A., & Meglouli, H. (2024) · Revue d intelligence artificielle · doi:10.18280/ria.380232 · Cited by 7
“Hot-rolled strip steel is widely utilized in automobile manufacture, aircraft, and light industries as one of the steel industry's key products [1, 2].”
BackgroundXAIP: An eXplainable AI‐Based Pipeline for Identifying Key Factors of Surface Defects in Strip Steel
Qian, J., Deng, L. J., Zhang, X., Pi, S., Song, Z., & Zhang, X. (2024) · steel research international · doi:10.1002/srin.202400499 · Cited by 7
A Fast Surface-Defect Detection Method Based on Dense-Yolo Network
Gao, F., Zhu, Q., Shao, G., Su, Y., Yang, J., & Yu, X. (2022) · CAAI Transactions on Intelligence Technology · doi:10.1049/cit2.12407 · Cited by 8
Alkapov, R., Konyshev, A. V., Vetoshkin, N., Valkevich, N., & Kostenetskiy, P. S. (2018) · Global Smart Industry Conference (GloSIC) · doi:10.1109/glosic.2018.8570081 · Cited by 8
“[22] 114x114 1.”
A Configuration Approach for Convolutional Neural Networks Used for Defect Detection on Surfaces
Garcia, D. F., García, I., delaCalle, F. J., & Usamentiaga, R. (2018) · International Conference on Mathematics and Computers in Sciences and Industry (MCSI) · doi:10.1109/mcsi.2018.00019 · Cited by 5
“The values for the hyper-parameters that define the configuration of the convolutional part of the CNN have been selected taking the most common values found in the literature [13-19].”
MethodKonovalenko, І. V., & Maruschak, P. O. (2021) · Materials Science · doi:10.1007/s11003-021-00495-5 · Cited by 5
“At present, there are many available systems and parameters aimed at the automated recognition and classification of images [12, 14–16].”
BackgroundMethodYan, 周. Z., Jiangnan, 孟. M., Jia, 吴. W., Zhi, 罗. L., & Dongli, 王. W. (2023) · Laser & Optoelectronics Progress · doi:10.3788/lop213302 · Cited by 4
A Novel Detection Method for Valve Damage of Nuclear Power Using Attention-Based U-Net (ABUNet)
Cao, S., Shen, S., Fan, S., Wang, X., Zhu, Z., Shi, Y., & Lou, J. (2023) · IEEE Sensors Journal · doi:10.1109/jsen.2023.3303012 · Cited by 5
A Method for Enhancing the Accuracy of Pet Breeds Identification Model in Complex Environments
Lin, Z., Xia, H., Liu, Y., Qin, Y., & Wang, C. (2024) · Applied Sciences · doi:10.3390/app14166914 · Cited by 4
“In the realm of image classification, it has become a widely accepted fundamental approach to extract image features via convolutional layers [6].”
BackgroundLDD-YOLO: An Improved Lightweight Detection Method for Steel Surface Defects Based on YOLOv8
Zhang, Y., Li, A., Li, Z., et al. (2024) · Conference proceedings/Conference proceedings - IEEE International Conference on Systems, Man, and Cybernetics · doi:10.1109/smc54092.2024.10830926 · Cited by 3
“With the development of deep learning, convolutional neural networks are used to solve the problem of steel defects detection [18], [19].”
An industrial mineral raw material classification method based on image segmentation
Xiao, X., Guo, J., Cao, X., Zhang, X., & Pang, S. (2022) · International Conference on Manufacturing, Industrial Automation and Electronics (ICMIAE) · doi:10.1109/icmiae57032.2022.00033 · Cited by 3
Advancing Robust Few-shot Surface Defect Detection through Meta-learning
Putri, W. R., Li, Y., & Wang, J. (2024) · International Conference on Integrated Circuits, Design, and Verification (ICDV) · doi:10.1109/icdv61346.2024.10616593 · Cited by 4
“In [27] and [6], they conduct the experiment using sequential CNN to improve the classification accuracy.”
MethodSelf-citationVisual Geometry Group Network for Flexible Printed Circuit Board Surface Defect Classification
Sheng, J., Guo, S., Li, H., Shen, S., Zhang, Y., Huang, Y., Sun, B., & Wang, J. (2024) · Canadian Journal of Electrical and Computer Engineering · doi:10.1109/icjece.2024.3368454 · Cited by 3
“Yi et al. [20] proposed a CNN-based defect recognition system to accurately recognize seven categories of typical surface defects found in steel strips.”
BackgroundZhou, L., Liang, G., Li, Y., Zheng, Y., Zhao, L., & Li, Z.-G. (2024) · Materials Today Communications · doi:10.1016/j.mtcomm.2024.109923 · Cited by 2
Self-citationFine-Tuned SqueezeNet Lightweight Model for Classifying Surface Defects in Hot-Rolled Steel
de la Rosa, F. L., Gómez-Sirvent, J. L., Belmonte, L. M., Morales, R., & Fernández‐Caballero, A. (2023) · Lecture notes in computer science · doi:10.1007/978-3-031-43085-5_18 · Cited by 3
Wang, T., Chen, X., Li, Z., Zhou, Z., & Zhou, Z. (2024) · Chinese Control Conference (CCC) · doi:10.23919/ccc63176.2024.10662135 · Cited by 2
“In the past, the construction of defect networks using deep learning relied on fully supervised methods [2], which necessitate a substantial amount of labeled data.”
BackgroundSekaran, S. S., & Subaji, M. (2024) · Journal of Advances in Information Technology · doi:10.12720/jait.15.12.1355-1365 · Cited by 2
“For a while, a popular area of study was exploring ways to obtain a collection of improved depictions of features and make a suitable classification for surface defects [1, 2].”
Demir, F., & Parlak, K. Ş. (2025) · Applied Sciences · doi:10.3390/app15084255 · Cited by 2
Colla, V., Vannucci, M., Matino, I., & Valentini, R. (2023) · steel research international · doi:10.1002/srin.202300374 · Cited by 4
Yu, H., Kang, M., Ding, C., Liu, Y., Gao, H., & Wang, J. (2024) · Journal of Nondestructive Evaluation · doi:10.1007/s10921-024-01121-5 · Cited by 1
“Yi et al. [ 17] developed an end-to-end architecture to extract defect images directly from the original image and subsequently recognize them, achieving improved classification results in steel plate defects.”
Designing a New Deep Convolutional Neural Network for Accurate Steel Surface Defects Classification
Ibrahim, A. A. M. S., & Tapamo, J. (2025) · Smart innovation, systems and technologies · doi:10.1007/978-981-97-8096-9_13 · Cited by 1
Morphology Recognition Network via Contrastive Distillation for Detecting Rail Surface Defects
Zhou, W., Wu, Y., Meng, J., & Dong, X. (2025) · IEEE Transactions on Emerging Topics in Computational Intelligence · doi:10.1109/tetci.2025.3593905 · Cited by 1
“For example, Yi et al. [21] employed CNNs with defect images as input and classified the defects into various categories as output.”
de la Rosa, F. L., Gómez-Sirvent, J. L., Sánchez-Reolid, R., Morales, R., & Fernández‐Caballero, A. (2026) · Sensors · doi:10.3390/s26020612 · Cited by 2
“In [23], the authors developed a CNN from scratch to classify the defects in the NEU database.”
A review of deep learning-based surface defect detection techniques for strip steel
Shang, F., Chen, H., Sun, B., Miao, R., Zhou, X., Xing, C., & Zhang, P. (2026) · Measurement · doi:10.1016/j.measurement.2026.121905 · Cited by 7
Gund, J., de Aruda, L. V. R., & Neves, F. (2021) · IEEE International Conference on Industry Applications · doi:10.1109/induscon51756.2021.9529819 · Cited by 1
“Also,It is worthwhile to note that [5] achieved 99.29% of accuracy with this method by applying 300 epochs.”
BackgroundMethodInfluentialLiang, Y., Chen, J., Zhou, W., Xu, Y. W., Zhai, Y., Labati, R. D., Piuri, V., & Scotti, F. (2021) · Electronics Letters · doi:10.1049/ell2.12361 · Cited by 1
A Cascaded Twin Dense Network Based Metallic Surface Defect Detection Algorithm
Wang, D., Liu, Y., Du, W., & Zhu, R. (2022) · Journal of Computer-Aided Design & Computer Graphics · doi:10.3724/sp.j.1089.2022.19056 · Cited by 4
“近几年, 不少研究人员提出基于深度神经网络 的钢表面缺陷检测方法([8-13]).”
BackgroundWang, W., Ren, Z., Wang, C., Lu, K., Tao, T., Pan, X., & Wang, B. (2024) · ISIJ International · doi:10.2355/isijinternational.isijint-2024-159 · Cited by 1
Huang, L., Yi-gong, Z., & Yang, T. (2022) · Multimedia Tools and Applications · doi:10.1007/s11042-022-12651-3 · Cited by 1
“Yi et al. [31] proposed a CNN-based classification method for steel strip defects, in which images of steel strip defects were directly used to train the model to classify seven types of defects with high accuracy.”
MethodTakano, S. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-818279-6.00011-6 · Cited by 1
Electrode Tab Deflection Detection for Pouch Lithium-Ion Battery Using Mask R-CNN
Lin, Y.-L., Chiang, Y.-M., Liu, C., & Huang, S. (2023) · Lecture notes in production engineering · doi:10.1007/978-3-031-18641-7_14 · Cited by 1
(2021) · Elsevier eBooks · doi:10.1016/b978-0-12-818279-6.00025-6
Steel Defect Detection Based on Modified RetinaNet
Zhang, Y., Gao, Y., & Shen, L. (2022) · Proceedings - International Conference on Pattern Recognition/Proceedings/International Conference on Pattern Recognition · doi:10.1109/icpr56361.2022.9956597
“And combine CNNs with unsupervised sparse encoder or segmentation algorithms, the accuracy can be improved to 99.0 % [21–24].”
MethodInfluentialPatil, S. T. R., Thigale, S., Karve, S., & Kale, V. (2023) · Proceeding International Conference on Science and Engineering · doi:10.52783/cienceng.v11i1.115 · Cited by 1
Steel Surface Defect Classification Based on Legendre Multiwavelet Transform and SVMPreprint
zheng, X., Liu, W., & Huang, Y. (2023) · SSRN Electronic Journal · doi:10.2139/ssrn.4524941
Defect Diagnosis of Hot Rolling Steel Surfaces Based on Deep Learning
Fors, M. N., Younes, M. A., Darwish, S. H., & Kholief, E. A. (2023) · International Telecommunications Conference (ITC-Egypt) · doi:10.1109/itc-egypt58155.2023.10206408
“Accuracy Li Yi[15] 99.05% Zhou[16] 99.00 % Ruoxu Ren[17] 99.27% Saiz [18] 98.89% Yu He[7] 99.17% Chao Wang[19] 98.60% Jingwen Fu[20] 99.10% The Proposed SC 99.33% Based on confirming the accuracy of the suggested strategy, the proposed approach is verified through comparative experiments with other approaches presente…”
MethodInfluentialQian, J., Zhang, X., Pi, S., Song, Z., & Zhang, X. (2024) · International Conference on Industrial Artificial Intelligence (IAI) · doi:10.1109/iai63275.2024.10730441
“In addition, accurate identification results rely on the experience and knowledge of engineers, but the entire strip manufacturing process is very complex, with complex physical and chemical processes, making it difficult to ensure comprehensive knowledge and experience [1], [2].”
BackgroundDiffdefect: A Diffusion Model-Based Framework for Simulating Defects in Industrial Components
Ye, W., Li, B., Jiang, S., Wang, Y., Zhang, R., & Xu, W. (2025) · International Conference on Computer and Communication Systems (ICCCS) · doi:10.1109/icccs65393.2025.11069601
A Hybrid CNN-SVM Algorithm for Detecting Manufacturing Defects
Karakaş, B., & Kulluk, S. (2025) · IEEE Access · doi:10.1109/access.2025.3630968 · Cited by 1
“Yi et al. [31] developed a 14-layer CNN architecture for classifying steel surface defects.”
A multi-scale attention network for steel surface defect recognition
Chen, C. J., & Liu, R.-S. (2026) · Soft Computing · doi:10.1007/s00500-025-11053-5 · Cited by 1
Tian, J., Xiang, Z., Hu, X., & Wu, W. (2026) · The Journal of Supercomputing · doi:10.1007/s11227-026-08249-3
“For example, Liu et al. [13] proposed a lightweight multi-scale CNN for real-time steel defect detection; Li et al. [14] developed an end-to-end defect detection sys-tem that learns directly from raw images for accurate localization and segmentation of steel strip defects.”
Defect classification for steel surfaces under multiple illumination through cross-reconstruction
Park, S., & Cho, S. I. (2026) · Neural Computing and Applications · doi:10.1007/s00521-026-11955-x
Meng, F., Fu, X., Nie, W., et al. (2025) · International Conference on Big Data Economy and Information Management (BDEIM) · doi:10.1145/3800000.3800162
“Since the 2010s, Deep learning algorithms especially Deep Convolutional Neural Networks have influenced the development of AI profoundly [ 10 ] , which promoted the advancement of technologies such as digital twins [ 11 ] .”
Mask-guided fusion for classifying steel inclusions in microstructural images
Guo, X., Li, Y., Ma, X., Wang, C., Mu, W., Fu, P., Song, K., Xu, H., & Xu, W. (2026) · Materials Characterization · doi:10.1016/j.matchar.2026.116859
Self-citationSudhakaran, P., Babu, K., Arthy, R., Punitha, A., Sabapathy, S., & Bhoopalan, R. (2026) · International Conference on Inventive Systems and Control (ICISC) · doi:10.1109/icisc69558.2026.11681778
Metadata
- Authors
- Yi, L., Li, G., & Jiang, M.
- Affiliations
- College of Electronics and Information Engineering Tongji University Shanghai 201804 PR China
- Tongji University (CN)
- Venue
- steel research international
- Publisher
- Wiley
- Published
- 2016-04-13
- Volume
- 88
- Issue
- 2
- ISSN
- 1611-3683 (ISSN-L)
- 1869-344X
- OpenAlex
- W2337601638
- Semantic Scholar
- 0f449f26897fe7aa65bd14dc790d887b52431e24
- Cited by
- 173
- References
- 20
- Citations by year
- 2026: 8 · 2025: 15 · 2024: 32 · 2023: 24 · 2022: 29 · 2021: 25 · 2020: 22 · 2019: 12 · 2018: 5 · 2017: 1
- FWCI
- 8.14
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- steel research international (publishedVersion)
- Funders
- Baosteel Group and Baosight Software Company
- Topics
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Industrial Vision Systems and Defect Detection
- Physical Sciences › Engineering › Mechanical Engineering › Non-Destructive Testing Techniques
- Physical Sciences › Engineering › Civil and Structural Engineering › Infrastructure Maintenance and Monitoring
- Keywords
- defect detection, end-to-end recognition, convolutional neural networks, defect classification, data augmentation, overfitting
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.