The DOI matches its Crossref record; 59 of the 59 references it cites were found in a registry or an index.
Thermal degradation and stability of starch under different processing conditions
Abstract
The objectives of this paper are to review the thermal degradation and stability of starch and starch‐based materials, including both fundamental sciences such as detecting techniques, the effect of amylose/amylopectin content in starches and starches modifications, as well as the effect of different processing environments, such as an open or sealed system, and shearless or shear stress conditions. The decomposition temperature of starches was increased with increasing amylopectin content in an open system. In the open system, the initial water content did not affect the decomposition temperature because all water had evaporated from samples prior to reaching the decomposition temperature. Two decomposition temperatures were observed in the sealed system: the first at lower temperature represents long chain scission; and the second at higher temperature involves decomposition of glucose ring. In the sealed system, the first degradation was increased with increasing amylopectin content. There is no observable difference of the second degradation for the samples containing different amylose/amylopectin ratios. The higher the moisture content is, the lower the second decomposition temperature is detected in the sealed system. Significant shear degradation was observed in amylopectin component of starch, while high amylose starch proved less sensitive to shear stress. The achievements in this area have increased the knowledge of polymer science, in particular to understand the degradation of natural polymers.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Thermal stability and flame retardancy of polyurethanes
Chattopadhyay, D. K., & Webster, D. C. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.06.002 · Cited by 1,748
van Soest, J. J. G., Tournois, H., de Wit, D., & Vliegenthart, J. F. G. (1995) · Carbohydrate Research · doi:10.1016/0008-6215(95)00270-7 · Cited by 1,263
Yao, F., Wu, Q., Lei, Y., Guo, W., & Xu, Y. (2008) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2007.10.012 · Cited by 887
Thermal processing of starch-based polymers
Liu, H., Xie, F., Yu, L., Chen, L., & Li, L. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.07.001 · Cited by 817
Self-citationPeterson, J. D., Vyazovkin, S., & Wight, C. A. (2001) · Macromolecular Chemistry and Physics · doi:10.1002/1521-3935(20010301)202:6<775::aid-macp775>3.0.co;2-g · Cited by 774
Lopez‐Rubio, A., Flanagan, B. M., Gilbert, E. P., & Gidley, M. J. (2008) · Biopolymers · doi:10.1002/bip.21005 · Cited by 719
Thermal Analysis of Polymers: Fundamentals and Applications
(2009) · Wiley eBooks · doi:10.1002/9780470423837 · Cited by 667
Tan, I., Flanagan, B. M., Halley, P. J., Whittaker, A. K., & Gidley, M. J. (2007) · Biomacromolecules · doi:10.1021/bm060988a · Cited by 480
Thermal degradation of polymeric materials
(1994) · Additives for Polymers · doi:10.1016/0306-3747(94)90200-3 · Cited by 342
Gelatinization of cornstarch with different amylose/amylopectin content
Liu, H., Yu, L., Xie, F., & Chen, L. (2006) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2006.01.026 · Cited by 328
Self-citation
Cited by
Benchmarking Cellulose Nanocrystals: From the Laboratory to Industrial Production
Reid, M. S., Villalobos, M., & Cranston, E. D. (2017) · Langmuir · doi:10.1021/acs.langmuir.6b03765 · Cited by 518
Gallo‐García, L. A., Peron‐Schlosser, B., Carpiné, D., de Oliveira, R. M., Simões, B. M., Dias, A. P., Yamashita, F., & Spier, M. R. (2022) · Journal of Food Process Engineering · doi:10.1111/jfpe.14181 · Cited by 12
Metadata
- Authors
- Liu, X., Wang, Y., Yu, L., Tong, Z., Chen, L., Liu, H., & Li, X.
- Venue
- Starch - Stärke
- Publisher
- Wiley
- Published
- 2012-11-22
- Volume
- 65
- Issue
- 1-2
- Pages
- 48-60
- ISSN
- 0038-9056 (ISSN-L)
- 1521-379X
- OpenAlex
- W1971714436
- Cited by
- 357
- References
- 59
- FWCI
- 7.37
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Thermal degradation and stability of starch under different processing conditions. https://app.cochat.ai/papers/10.1002/star.201200198
- The paper
- Liu, X., Wang, Y., Yu, L., Tong, Z., Chen, L., Liu, H., & Li, X. (2013). Thermal degradation and stability of starch under different processing conditions. Starch - Stärke. https://doi.org/10.1002/star.201200198
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.