The DOI matches its Crossref record; 59 of the 59 references it cites were found in a registry or an index.
Thermal degradation and stability of starch under different processing conditions
Abstract
The objectives of this paper are to review the thermal degradation and stability of starch and starch‐based materials, including both fundamental sciences such as detecting techniques, the effect of amylose/amylopectin content in starches and starches modifications, as well as the effect of different processing environments, such as an open or sealed system, and shearless or shear stress conditions. The decomposition temperature of starches was increased with increasing amylopectin content in an open system. In the open system, the initial water content did not affect the decomposition temperature because all water had evaporated from samples prior to reaching the decomposition temperature. Two decomposition temperatures were observed in the sealed system: the first at lower temperature represents long chain scission; and the second at higher temperature involves decomposition of glucose ring. In the sealed system, the first degradation was increased with increasing amylopectin content. There is no observable difference of the second degradation for the samples containing different amylose/amylopectin ratios. The higher the moisture content is, the lower the second decomposition temperature is detected in the sealed system. Significant shear degradation was observed in amylopectin component of starch, while high amylose starch proved less sensitive to shear stress. The achievements in this area have increased the knowledge of polymer science, in particular to understand the degradation of natural polymers.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Thermal stability and flame retardancy of polyurethanes
Chattopadhyay, D. K., & Webster, D. C. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.06.002 · Cited by 1,748
van Soest, J. J. G., Tournois, H., de Wit, D., & Vliegenthart, J. F. G. (1995) · Carbohydrate Research · doi:10.1016/0008-6215(95)00270-7 · Cited by 1,263
Yao, F., Wu, Q., Lei, Y., Guo, W., & Xu, Y. (2008) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2007.10.012 · Cited by 887
Thermal processing of starch-based polymers
Liu, H., Xie, F., Yu, L., Chen, L., & Li, L. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.07.001 · Cited by 817
Self-citationPeterson, J. D., Vyazovkin, S., & Wight, C. A. (2001) · Macromolecular Chemistry and Physics · doi:10.1002/1521-3935(20010301)202:6<775::aid-macp775>3.0.co;2-g · Cited by 774
Lopez‐Rubio, A., Flanagan, B. M., Gilbert, E. P., & Gidley, M. J. (2008) · Biopolymers · doi:10.1002/bip.21005 · Cited by 719
Thermal Analysis of Polymers: Fundamentals and Applications
(2009) · Wiley eBooks · doi:10.1002/9780470423837 · Cited by 667
Tan, I., Flanagan, B. M., Halley, P. J., Whittaker, A. K., & Gidley, M. J. (2007) · Biomacromolecules · doi:10.1021/bm060988a · Cited by 480
Thermal degradation of polymeric materials
(1994) · Additives for Polymers · doi:10.1016/0306-3747(94)90200-3 · Cited by 342
Gelatinization of cornstarch with different amylose/amylopectin content
Liu, H., Yu, L., Xie, F., & Chen, L. (2006) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2006.01.026 · Cited by 328
Self-citationSize-exclusion chromatography (SEC) of branched polymers and polysaccharides
Gaborieau, M., & Castignolles, P. (2010) · Analytical and Bioanalytical Chemistry · doi:10.1007/s00216-010-4221-7 · Cited by 324
Effect of moisture content on the melting and subsequent physical aging of cornstarch
Shogren, R. L. (1992) · Carbohydrate Polymers · doi:10.1016/0144-8617(92)90117-9 · Cited by 303
Xie, F., Halley, P. J., & Avérous, L. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.07.002 · Cited by 301
Mechanism of Degradation of Starch, a Highly Branched Polymer, during Extrusion
Liu, W.-C., Halley, P. J., & Gilbert, R. G. (2010) · Macromolecules · doi:10.1021/ma100067x · Cited by 294
Thermal degradation of cellulose derivatives/starch blends and sisal fibre biocomposites
Alvarez, V. A., & Vázquez, A. (2004) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2003.09.003 · Cited by 276
Rheological properties of starches with different amylose/amylopectin ratios
Xie, F., Yu, L. F., Su, B., Liu, P., Wang, J., Liu, H., & Chen, L. (2009) · Journal of Cereal Science · doi:10.1016/j.jcs.2009.01.002 · Cited by 274
Self-citationCharacterization of branched polysaccharides using multiple‐detection size separation techniques
Vilaplana, F., & Gilbert, R. G. (2010) · Journal of Separation Science · doi:10.1002/jssc.201000525 · Cited by 263
Chemical modification of starch by reactive extrusion
Moad, G. (2011) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.11.002 · Cited by 262
López‐Rubio, A., Flanagan, B. M., Shrestha, A. K., Gidley, M. J., & Gilbert, E. P. (2008) · Biomacromolecules · doi:10.1021/bm800213h · Cited by 259
Determination of the degree of substitution of acetylated starch by hydrolysis, 1H NMR and TGA/IR
Elomaa, M. A. (2004) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2004.05.003 · Cited by 252
Thermogravimetric Analysis (TGA)
Prime, R. B., BAIR, H. E., Vyazovkin, S., GALLAGHER, P. K., & Riga, A. T. (2008) · Wiley eBooks · doi:10.1002/9780470423837.ch3 · Cited by 235
Extrusion processing and characterization of edible starch films with different amylose contents
Li, M., Liu, P., Zou, W., et al. (2011) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2011.04.021 · Cited by 227
A kinetic study of the thermal degradation of chitosan and a mercaptan derivative of chitosan
Peniche-Covas, C., Argüelles-Monal, W. M., & Román, J. S. (1993) · Polymer Degradation and Stability · doi:10.1016/0141-3910(93)90120-8 · Cited by 191
Surface Chemical Modification of Waxy Maize Starch Nanocrystals
Angellier, H., Molina-Boisseau, S., Belgacem, M. N., & Dufresne, A. (2005) · Langmuir · doi:10.1021/la047530j · Cited by 185
Characterisation of the substituent distribution in starch and cellulose derivatives
Richardson, S., & Gorton, L. (2003) · Analytica Chimica Acta · doi:10.1016/j.aca.2003.08.005 · Cited by 184
Tran, T. T. B., Shelat, K. J., Tang, D., Li, E., Gilbert, R. G., & Hasjim, J. (2011) · Journal of Agricultural and Food Chemistry · doi:10.1021/jf105021r · Cited by 177
Synthesis, characterization, and biodegradability of fatty-acid esters of amylose and starch
Aburto, J., Alric, I., Thiebaud, S., Borredon, E., Bikiaris, D., Prinos, J., & Panayiotou, C. (1999) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19991107)74:6<1440::aid-app17>3.0.co;2-v · Cited by 171
TGA/FTIR: an extremely useful technique for studying polymer degradation
Wilkie, C. A. (1999) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(99)00054-3 · Cited by 166
A thermal analysis investigation of partially hydrolyzed starch
Aggarwal, P., & Dollimore, D. (1998) · Thermochimica Acta · doi:10.1016/s0040-6031(98)00355-4 · Cited by 163
Gidley, M. J., Hanashiro, I., Hani, N. M., Hill, S. E., Huber, A., Jane, J., Liu, Q., Morris, G. A., Rolland‐Sabaté, A., Striegel, A. M., et al. (2009) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2009.07.056 · Cited by 155
Guinesi, L. S., da Róz, A. L., Corradini, E., Mattoso, L. H. C., Teixeira, E. D. M., & Curvelo, A. A. D. S. (2006) · Thermochimica Acta · doi:10.1016/j.tca.2006.06.002 · Cited by 137
Macromolecular and functional properties of native and extrusion-cooked corn starch.
Chinnaswamy, R., & Hanna, M. A. (1990) · Cereal Chemistry · Cited by 134
Mutungi, C. M., Onyango, C., Doert, T., Paasch, S., Thiele, S., Machill, S., Jaros, D., & Rohm, H. (2010) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2010.07.023 · Cited by 133
Bai, Y., Shi, Y., Herrera, A. I., & Prakash, O. (2010) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.07.053 · Cited by 131
Extrusion of waxy maize starch: melt rheology and molecular weight degradation of amylopectin
Willett, J. L., Millard, M. M., & Jasberg, B. K. (1997) · Polymer · doi:10.1016/s0032-3861(97)00155-9 · Cited by 129
Glass transition temperature of starches with different amylose/amylopectin ratios
Liu, P., Yu, L. F., Wang, X., et al. (2010) · Journal of Cereal Science · doi:10.1016/j.jcs.2010.02.007 · Cited by 127
Self-citationZhang, X., Golding, J., & Burgar, I. M. (2002) · Polymer · doi:10.1016/s0032-3861(02)00546-3 · Cited by 124
Liu, X., Yu, L. F., Liu, H., Chen, L., & Li, L. (2009) · Cereal Chemistry · doi:10.1094/cchem-86-4-0383 · Cited by 120
Self-citationMicrostructural changes of potato cells and starch granules heated in oil
Aguilera, J. M., Cadoche, L., López, C., & Gutiérrez, G. (2001) · Food Research International · doi:10.1016/s0963-9969(01)00118-1 · Cited by 115
Synthesis, thermal properties, and biodegradability of propyl-etherified starch
Teramoto, N., Motoyama, T., Yosomiya, R., & Shibata, M. (2002) · European Polymer Journal · doi:10.1016/s0014-3057(02)00199-4 · Cited by 112
Molecular breakdown of corn starch by thermal and mechanical effects
van den Einde, R. M., Akkermans, C., van der Goot, A. J., & Boom, R. M. (2004) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2004.03.006 · Cited by 105
Production of Resistant Starch by Extrusion Cooking of Acid‐Modified Normal‐Maize Starch
Hasjim, J., & Jane, J. (2009) · Journal of Food Science · doi:10.1111/j.1750-3841.2009.01285.x · Cited by 91
Water solubility, thermal characteristics and biodegradability of extruded starch acetate foams
Xu, Y., Dzenis, Y. A., & Hanna, M. A. (2004) · Industrial Crops and Products · doi:10.1016/j.indcrop.2004.05.004 · Cited by 87
Effects of hydrophilic fillers on the thermal degradation of poly(lactic acid)
Liu, X., Khor, S., Petinakis, E., Yu, L. F., Simon, G. P., Dean, K., & Bateman, S. A. (2010) · Thermochimica Acta · doi:10.1016/j.tca.2010.06.015 · Cited by 82
Self-citationEffect of Extrusion Cooking on Molecular Parameters of Corn Starch
Brümmer, T., Meuser, F., van Lengerich, B., & Niemann, C. (2002) · Starch - Stärke · Cited by 69
Thermal stability and degradation of starch derivatives
Rudnik, E., Matuschek, G., Milanov, N., & Kettrup, A. (2006) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-005-7274-7 · Cited by 67
The effect of chemical modification on starch studied using thermal analysis
Aggarwal, P., & Dollimore, D. (1998) · Thermochimica Acta · doi:10.1016/s0040-6031(98)00517-6 · Cited by 60
Aggarwal, P., & Dollimore, D. (1997) · Thermochimica Acta · doi:10.1016/s0040-6031(96)03103-6 · Cited by 53
Extrusion Chemistry of Wheat Flour Proteins: I. Free Radical Formation
Schaich, K. M., & Rebello, C. A. (1999) · Cereal Chemistry · doi:10.1094/cchem.1999.76.5.748 · Cited by 49
Acar, İ., Soylu, G. S. P., & Özgümüş, S. (2008) · Journal of Applied Polymer Science · doi:10.1002/app.28142 · Cited by 41
Extrusion Processing of Starch Film
Su, B., Xie, F., Li, M., Corrigan, P. A., Yu, L. F., Li, X., & Chen, L. (2009) · International Journal of Food Engineering · doi:10.2202/1556-3758.1617 · Cited by 37
Self-citationEffect of Thermal Treatment on the Stability and Structure of Maize Starch Cast Films
Vasques, C. T., Domenech, S. C., Severgnini, V. L. S., Belmonte, L. A. O., Soldi, M. S., Barreto, P. L. M., & Soldi, V. (2007) · Starch - Stärke · doi:10.1002/star.200600500 · Cited by 33
Thermogravimetry/mass spectrometry study of weakly basic starch-based ion exchanger
S̆imkovic, I. (2001) · Carbohydrate Polymers · doi:10.1016/s0144-8617(00)00230-7 · Cited by 31
Retrogradation of waxy cornstarch studied by DSC
Liu, H., Yu, L. F., Tong, Z., & Chen, L. (2010) · Starch - Stärke · doi:10.1002/star.201000017 · Cited by 30
Self-citationThermal stability of starch benzoate
Stojanović, Ž., Katsikas, L., Popović, I. G., Jovanović, S., & Jeremić, K. (2004) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2004.07.018 · Cited by 26
Pyrolysis-gas chromatography mass spectrometry analysis of starch-based ion-exchangers
S̆imkovic, I., Francis, B. A., & Reeves, J. B. (1997) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(97)00063-6 · Cited by 21
Enhancement of pro‐degradant performance in polyethylene/starch blends as a function of distribution
Yu, L. F., Liu, X., Petinakis, E., Bateman, S. A., Sangwan, P., Ammala, A., Dean, K., Holmes, S., Yuan, Q., Siew, C. K., et al. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.38229 · Cited by 11
Self-citationApplications of NMR in the Studies of Starch Systems
Farhat, I. A. (2008) · Springer eBooks · doi:10.1007/1-4020-3910-7_217 · Cited by 7
Zhongdong, L., Yu-fen, Z., Huabin, W., Shuxia, C., An, H., Yunchang, G., Yanqun, L., Lü, K., & Hu, J. (2005) · Ultramicroscopy · doi:10.1016/j.ultramic.2005.06.051 · Cited by 2
Cited by
Starch-based biodegradable materials: Challenges and opportunities
Jiang, T., Duan, Q., Zhu, J., Liu, H., & Yu, L. (2020) · Advanced Industrial and Engineering Polymer Research · doi:10.1016/j.aiepr.2019.11.003 · Cited by 534
Self-citationBenchmarking Cellulose Nanocrystals: From the Laboratory to Industrial Production
Reid, M. S., Villalobos, M., & Cranston, E. D. (2017) · Langmuir · doi:10.1021/acs.langmuir.6b03765 · Cited by 518
Liu, J., Pu, H., Liu, S., Kan, J., & Jin, C. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.07.014 · Cited by 297
Methodologies for Increasing the Resistant Starch Content of Food Starches: A Review
Dupuis, J. H., Liu, Q., & Yada, R. Y. (2014) · Comprehensive Reviews in Food Science and Food Safety · doi:10.1111/1541-4337.12104 · Cited by 261
Gallo‐García, L. A., Peron‐Schlosser, B., Carpiné, D., de Oliveira, R. M., Simões, B. M., Dias, A. P., Yamashita, F., & Spier, M. R. (2022) · Journal of Food Process Engineering · doi:10.1111/jfpe.14181 · Cited by 12
Metadata
- Authors
- Liu, X., Wang, Y., Yu, L., Tong, Z., Chen, L., Liu, H., & Li, X.
- Venue
- Starch - Stärke
- Publisher
- Wiley
- Published
- 2012-11-22
- Volume
- 65
- Issue
- 1-2
- Pages
- 48-60
- ISSN
- 0038-9056 (ISSN-L)
- 1521-379X
- OpenAlex
- W1971714436
- Cited by
- 357
- References
- 59
- FWCI
- 7.37
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.