Modeling and harnessing sparse and low-rank data structure: a new paradigm for structural dynamics, identification, damage detection, and health monitoring: Sparse and Low-Rank Data Structure: A New Paradigm in SHM
Open accessThe DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
This paper presents a new paradigm of explicitly modeling and harnessing the data structure to address the inverse problems in structural dynamics, identification, and data-driven health monitoring. In particular, it is shown that the structural dynamic features and damage information, intrinsic within the structural vibration response measurement data, possesses sparse and low-rank structure, which can be effectively modeled and processed by emerging mathematical tools such as sparse representation and compressed sensing, low-rank matrix decomposition and completion, as well as the unsupervised multivariate blind source separation. It is also discussed that explicitly modeling and harnessing the sparse and low-rank data structure could benefit future work in developing data-driven approaches toward rapid, unsupervised, and effective system identification, damage detection, as well as massive SHM data sensing and management. Copyright © 2016 John Wiley & Sons, Ltd.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
An Introduction To Compressive Sampling
Candes, E. J., & Wakin, M. B. (2008) · IEEE Signal Processing Magazine · doi:10.1109/msp.2007.914731 · Cited by 10,017 · cited 3×
“The CS theory [14,15] states that if x∈R is sufficiently sparse (K is small in terms of Ψ), then from the knowledge of A∈R × N and b∈R, it can be accurately recovered with overwhelming probability of success by (P1)”
BackgroundLos Alamos National Lab., N. (. S., Doebling, S., USDOE, W., Farrar, C., Prime, M., & Shevitz, D. (1996) · doi:10.2172/249299 · Cited by 2,899 · cited 2×
“, strains, displacements, and accelerations) and analysis techniques such as modal analysis-based system identification and damage detection methods have been widely studied for SHM [1].”
BackgroundMethodSupport vector machine in machine condition monitoring and fault diagnosis
Widodo, A., & Yang, B.-S. (2007) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2006.12.007 · Cited by 1,650
Yang, Y., & Nagarajaiah, S. (2014) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2013.09.009 · Cited by 101
Self-citation
Research works printed but not linked: 65
- Ewin, 2000, Modal Testing: Theory, Practice and Application
- Friswell, 1995, Finite Element Model Updating in Structural Dynamics, 10.1007/978-94-015-8508-8 · DOI · Paper page
- Ibrahim, 1973, A time domain modal vibration test technique, Shock and Vibration Bulletin, 43, 21
- Juang, 1985, An eigensystem realization algorithm for modal parameter identification and model reduction, Journal of Guidance, Control, and Dynamics, 8, 620, 10.2514/3.20031 · DOI · Paper page
- VanOverschee, 1996, Subspace Identification for Linear Systems: Theory, Implementation, Applications, 10.1007/978-1-4613-0465-4 · DOI · Paper page
- Brincker, 2001, Modal identification of output-only systems using frequency domain decomposition, Smart Material and Structures, 10, 441, 10.1088/0964-1726/10/3/303 · DOI · Paper page
- Farrar, 2012, Structural Health Monitoring: A Machine Learning Perspective, 10.1002/9781118443118 · DOI · Paper page
- Peeters, 2001, Stochastic system identification for operational modal analysis: a review, Journal of Dynamic Systems, Measurement, and Control, 123, 659, 10.1115/1.1410370 · DOI · Paper page
- Kijewski, 2003, Wavelet transforms for system identification in civil engineering, Computer-aided Civil and Infrastructural Engineering, 18, 339, 10.1111/1467-8667.t01-1-00312 · DOI · Paper page
- Yang, 2003, System identification of linear structures based on Hilbert-Huang spectral analysis, part 1: normal modes, Earthquake Engineering and Structural Dynamics, 32, 1443, 10.1002/eqe.287 · DOI · Paper page
- Yang, 2004, Hilbert-Huang based approach for structural damage detection, ASCE Journal of Engineering Mechanics, 130, 85, 10.1061/(ASCE)0733-9399(2004)130:1(85) · doi:10.1061/(asce)0733-9399(2004)130:1(85 · Paper page
- Nagarajaiah, 2009, Output only identification and structural damage detection using time frequency and wavelet techniques, Earthquake Engineering and Engineering Vibration, 8, 583, 10.1007/s11803-009-9120-6 · DOI · Paper page
- Bruckstein, 2008, From sparse solutions of systems of equations to sparse modeling of signals and images, SIAM Review, 51, 34, 10.1137/060657704 · DOI · Paper page
- Candes, 2009, Robust principal component analysis, Journal of ACM, 58, 1, 10.1145/1970392.1970395 · DOI · Paper page
- Hyvarinen, 2001, Independent Component Analysis, 10.1002/0471221317 · DOI · Paper page
- Cover, 1991, Elements of Information Theory, 10.1002/0471200611 · DOI · Paper page
- Jolliffe, 1986, Principal Component Analysis, 10.1007/978-1-4757-1904-8 · DOI · Paper page
- Feeny, 1998, On the physical interpretation of proper orthogonal modes in vibration, Journal of Sound and Vibration, 211, 607, 10.1006/jsvi.1997.1386 · doi:10.1006/jsvi.1997.1386
- Yang, 2014, Data compression of structural seismic responses using principled independent component analysis, ASCE Journal of Structural Engineering, 140, 0401, 10.1061/(ASCE)ST.1943-541X.0000946 · doi:10.1061/(asce)st.1943-541x.0000946
- Yang, 2014, Blind denoising of structural responses with outliers via principal component pursuit, Structural Control and Health Monitoring, 21, 962, 10.1002/stc.1624 · DOI · Paper page
- Belouchrani, 1997, A blind source separation technique using second-order statistics, IEEE Transactions on Signal Processing, 45, 434, 10.1109/78.554307 · DOI · Paper page
- Stone, 2001, Blind source separation using temporal predictability, Neural Computation, 13, 1559, 10.1162/089976601750265009 · DOI · Paper page
- Antoni, 2005, Special issue: blind source separation, Mechanical Systems and Signal Processing, 19, 1163, 10.1016/j.ymssp.2005.08.021 · DOI
- Kerschen, 2007, Physical interpretation of independent component analysis in structural dynamics, Mechanical Systems and Signal Processing, 21, 1561, 10.1016/j.ymssp.2006.07.009 · DOI
- Poncelet, 2007, Output-only modal analysis using blind source separation techniques, Mechanical Systems and Signal Processing, 21, 2335, 10.1016/j.ymssp.2006.12.005 · DOI · Paper page
- McNeill, 2008, A framework for blind identification using joint approximate diagonalization, Mechanical Systems and Signal Processing, 22, 1526, 10.1016/j.ymssp.2008.01.010 · DOI
- Hazra, 2010, Modified cross-correlation method for the blind identification of structures, ASCE Journal of Engineering Mechanics, 136, 889, 10.1061/(ASCE)EM.1943-7889.0000133 · DOI
- Abazarsa, 2013, Response-only modal identification of structures using limited sensors, Structural Control and Health Monitoring, 20, 987, 10.1002/stc.1513 · DOI
- Yang, 2013, Time-frequency blind source separation using independent component analysis for output-only modal identification of highly-damped structures, ASCE Journal of Structural Engineering, 139, 1780, 10.1061/(ASCE)ST.1943-541X.0000621 · DOI
- Yang, 2014, Blind identification of damage in time-varying system using independent component analysis with wavelet transform, Mechanical Systems and Signal Processing, 47, 3, 10.1016/j.ymssp.2012.08.029 · DOI
- Antoni, 2013, A study and extension of second-order blind source separation to operational modal analysis, Journal of Sound and Vibration, 332, 1079, 10.1016/j.jsv.2012.09.016 · DOI
- Yang, 2013, Output-only modal identification with limited sensors using sparse component analysis, Journal of Sound and Vibration, 332, 4741, 10.1016/j.jsv.2013.04.004 · DOI · Paper page
- Nagarajaiah, 2015, Blind modal identification of output-only non-proportionally-damped structures by time-frequency complex independent component analysis, Smart Structures and Systems, 15, 81, 10.12989/sss.2015.15.1.081 · doi:10.12989/sss.2015.15.1.081
- Sadhu, 2011, Decentralized modal identification using sparse blind source separation, Smart Materials and Structures, 20, 125009, 10.1088/0964-1726/20/12/125009 · doi:10.1088/0964-1726/20/12/125009
- Ghahari, 2014, Blind modal identification of structures from spatially sparse seismic response signals, Structural Control and Health Monitoring, 21, 649
- Yang, 2013, Blind modal identification of output-only structures in time domain based on complexity pursuit, Earthquake Engineering and Structural Dynamics, 42, 1885, 10.1002/eqe.2302 · DOI
- Xie, 2005, A note on Stone's conjecture of blind source separation, Neural Computation, 17, 321, 10.1162/0899766053011492 · DOI
- Yang, 2015, Real-time output-only identification of time-varying cable tension via complexity pursuit, ASCE Journal of Structural Engineering, 10.1061/(ASCE)ST.1943-541X.0001337 · DOI
- Zhang, 2007, Linear predictor-based lossless compression of vibration sensor data: systems approach, Journal of Engineering Mechanics, 133, 431, 10.1061/(ASCE)0733-9399(2007)133:4(431) · doi:10.1061/(asce)0733-9399(2007)133:4(431
- Yildirim, 2013, A prediction-error-based method for data transmission and damage detection in wireless sensor networks for structural health monitoring, Journal of Vibration and Control, 19, 2244, 10.1177/1077546313501538 · doi:10.1177/1077546313501538
- Bogdanovic, 2014, Spatio-temporal protocol for power-efficient acquisition wireless sensors based SHM, Smart Structures and Systems, 14, 1, 10.12989/sss.2014.14.1.001 · doi:10.12989/sss.2014.14.1.001
- De Boe, 2003, Principal component analysis of a piezo-sensor array for damage localization, International Journal of Structural Health Monitoring, 2, 137, 10.1177/1475921703002002005 · DOI · Paper page
- Friswell, 1999, Sensor validation for smart structures, Journal of Intelligent Material Systems and Structures, 10, 973, 10.1106/GVD2-EGPN-C5B1-DPNX · DOI · Paper page
- Kerschen, 2005, Sensor validation using principal component analysis, Smart Materials and Structures, 14, 36, 10.1088/0964-1726/14/1/004 · DOI
- Yang, 2015, Data compression of very large-scale structural seismic and typhoon vibration responses by low-rank representation with matrix reshape, Structural Control and Health Monitoring, 22, 1119, 10.1002/stc.1737 · DOI
- Yang, 2014, Blind identification of damage in time-varying systems using independent component analysis with wavelet transform, Mechanical Systems and Signal Processing, 47, 3, 10.1016/j.ymssp.2012.08.029 · DOI
- Yang, 2015, Dynamic imaging: real-time detection of local structural damage with blind separation of low-rank background and sparse innovation, ASCE Journal of Structural Engineering,, 10.1061/(ASCE)ST.1943-541X.0001334 · DOI
- Adeli, 2001, Neural networks in civil engineering: 1989-2000, Computer-Aided Civil and Infrastructure Engineering, 16, 126, 10.1111/0885-9507.00219 · DOI · Paper page
- Worden, 2001, Damage identification using support vector machines, Smart Materials and Structures, 10, 540, 10.1088/0964-1726/10/3/317 · DOI
- Trendafilova, 2008, Vibration-based damage detection in an aircraft wing scaled model using principal component analysis and pattern recognition, Journal of Sound and Vibration, 313, 560, 10.1016/j.jsv.2007.12.008 · DOI
- Dharap, 2006, Structural health monitoring using ARMarkov observers, Journal of Intelligent Material Systems and Structures, 17, 469, 10.1177/1045389X06058793 · DOI
- Sun, 2013, Identification of structural models using a modified Artificial Bee Colony algorithm, Computers & Structures, 116, 59, 10.1016/j.compstruc.2012.10.017 · DOI
- Sun, 2013, Nondestructive identification of multiple flaws using XFEM and a topologically adapting artificial bee colony algorithm, International Journal for Numerical Methods in Engineering, 95, 871, 10.1002/nme.4529 · DOI
- Lynch, 2006, A summary review of wireless sensors and sensor networks for structural health monitoring, Shock and Vibration Digest, 38, 91, 10.1177/0583102406061499 · DOI · Paper page
- Bao, 2011, Compressive sampling for accelerometer signals in structural health monitoring, International Journal of Structural Health Monitoring, 10, 235, 10.1177/1475921710373287 · DOI · Paper page
- Mascarenas, 2013, Compressed sensing techniques for detecting damage in structures, International Journal of Structural Health Monitoring, 12, 325, 10.1177/1475921713486164 · DOI · Paper page
- O'Connor, 2014, Compressed sensing embedded in an operational wireless sensor network to achieve energy efficiency in long-term monitoring applications, Smart Materials and Structures, 23, 085014, 10.1088/0964-1726/23/8/085014 · DOI
- Yang, 2015, Output-only modal identification by compressed sensing: non-uniform low-rate random sampling, Mechanical Systems and Signal Processing, 56, 15, 10.1016/j.ymssp.2014.10.015 · DOI
- Tausiesakul B Gkoktsi K Giaralis A Compressive sensing spectral estimation for output-only structural system identification Proc. 7th Int. Conf. Computational Stochastic Mechanics 2014
- Comerford, 2015, Compressive sensing based stochastic process power spectrum estimation subject to missing data, Probabilistic Engineering Mechanics
- Bao, 2012, Compressive sampling based data loss recovery for wireless sensor networks used in civil structural health monitoring, Structural Health Monitoring
- Yang, 2015, Robust data transmission and recovery of images by compressed sensing for structural health diagnosis, Structural Control and Health Monitoring
- Yang, 2015, Harnessing data structure for recovery of structural vibration responses from incomplete data: sparse representation versus low-rank structure, Mechanical Systems and Signal Processing
- Candès, 2009, Exact matrix completion via convex optimization, Foundations of Computational Mathematics, 9, 717, 10.1007/s10208-009-9045-5 · DOI · Paper page
- Mallat, 2009, A wavelet tour of signal processing: the sparse way
Cited by
Emerging Artificial Intelligence Methods in Structural Engineering
Salehi, H., & Burgueño, R. (2018) · Engineering Structures · doi:10.1016/j.engstruct.2018.05.084 · Cited by 1,068
Sun, L., Shang, Z., Xia, Y., Bhowmick, S., & Nagarajaiah, S. (2020) · Journal of Structural Engineering · doi:10.1061/(asce)st.1943-541x.0002535 · Cited by 731
Self-citationTang, Z., Chen, Z., Bao, Y., & Li, H. (2019) · Structural Control and Health Monitoring · doi:10.1002/stc.2296 · Cited by 436
Xu, Y., Bao, Y., Chen, J., Zuo, W., & Li, H. (2019) · Structural Health Monitoring · doi:10.1177/1475921718764873 · Cited by 292
Feng, D.-C., Liu, Z.-T., Wang, X.-D., Jiang, Z.-M., & Liang, S.-X. (2020) · Advanced Engineering Informatics · doi:10.1016/j.aei.2020.101126 · Cited by 269
Metadata
- Authors
- Nagarajaiah, S., & Yang, Y.
- Venue
- Structural Control and Health Monitoring
- Publisher
- Wiley
- Published
- 2016-02-23
- Volume
- 24
- Issue
- 1
- Pages
- e1851
- ISSN
- 1545-2255 (ISSN-L)
- OpenAlex
- W2283608459
- Cited by
- 121
- References
- 4
- FWCI
- 17.22
- Type
- journal article
- Language
- en
- Open access
- bronze
- Licence
- doi.wiley.com/10.1002/tdm_license_1 (tdm)
- onlinelibrary.wiley.com/termsAndConditions (vor)
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Modeling and harnessing sparse and low-rank data structure: a new paradigm for structural dynamics, identification, damage detection, and health monitoring: Sparse and Low-Rank Data Structure: A New Paradigm in SHM. https://app.cochat.ai/papers/10.1002/stc.1851
- The paper
- Nagarajaiah, S., & Yang, Y. (2017). Modeling and harnessing sparse and low-rank data structure: a new paradigm for structural dynamics, identification, damage detection, and health monitoring: Sparse and Low-Rank Data Structure: A New Paradigm in SHM. Structural Control and Health Monitoring. https://doi.org/10.1002/stc.1851
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.