The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Vibration‐based structural condition assessment using convolution neural networks
Abstract
A novel vibration-based structural health monitoring (SHM) approach that uses two-dimensional deep convolution neural networks (CNN) is introduced. The CNN extracts the features from acceleration response histories and drastically reduces the dimension of response history to make damage state classification possible with limited number of acceleration measurements. The proposed method was validated, and its applicability and efficiency were demonstrated using vibration response data recorded during the shake-table testing of a one-fourth–scale model of a reinforced concrete highway bridge. The proposed method predicted predefined damage states with 100% accuracy using recorded (acceleration) vibration response data. The method was shown to be robust and sensitive to very small changes in structural condition. It is also noted that the CNN-based SHM method is scalable to any large number of damage states (including extent and location) with suitable network training. The required training data may be generated analytically using a nonlinear finite element model.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
ImageNet classification with deep convolutional neural networks
Krizhevsky, A., Sutskever, I., & Hinton, G. E. (2017) · Communications of the ACM · doi:10.1145/3065386 · Cited by 112,155
Gradient-based learning applied to document recognition
Lecun, Y., Bottou, L., Bengio, Y., & Haffner, P. (1998) · Proceedings of the IEEE · doi:10.1109/5.726791 · Cited by 58,805
Los Alamos National Lab., N. (. S., Doebling, S., USDOE, W., Farrar, C., Prime, M., & Shevitz, D. (1996) · doi:10.2172/249299 · Cited by 2,899 · cited 2×
“Doebling et al.(1) presented an extensive review of vibration‐based damage detection methods up to 1996, and subsequently Sohn et al.”
Structural Health Monitoring of Large Civil Engineering Structures
Chen, H., & Ni, Y. (2018) · doi:10.1002/9781119166641 · Cited by 223
Cited by
Avci, O., Abdeljaber, O., Kiranyaz, S., Hussein, M., Gabbouj, M., & Inman, D. J. (2021) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2020.107077 · Cited by 1,442
Azimi, M., Eslamlou, A., & Pekcan, G. (2020) · Sensors · doi:10.3390/s20102778 · Cited by 769
Self-citationA systematic review of convolutional neural network-based structural condition assessment techniques
Sony, S., Dunphy, K., Sadhu, A., & Capretz, M. (2021) · Engineering Structures · doi:10.1016/j.engstruct.2020.111347 · Cited by 398
Fathnejat, H., Ahmadi-Nedushan, B., Hosseininejad, S., Noori, M., & Altabey, W. A. (2023) · Engineering Structures · doi:10.1016/j.engstruct.2022.115311 · Cited by 79
Deep generative Bayesian optimization for sensor placement in structural health monitoring
Sajedi, S., & Liang, X. (2022) · Computer-Aided Civil and Infrastructure Engineering · doi:10.1111/mice.12799 · Cited by 68
Metadata
- Authors
- Khodabandehlou, H., Pekcan, G., & Fadali, M. S.
- Venue
- Structural Control and Health Monitoring
- Publisher
- Wiley
- Published
- 2018-12-13
- Pages
- e2308
- ISSN
- 1545-2255 (ISSN-L)
- 1545-2263
- OpenAlex
- W2904906816
- Cited by
- 211
- References
- 4
- FWCI
- 15.04
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.