Optimal design formulas for viscous tuned mass dampers in wind-excited structures: VISCOUS TMD IN WIND-EXCITED STRUCTURES
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
SUMMARY Optimal design for tuned mass dampers (TMDs) with linear or nonlinear viscous damping is formulated in order for design practitioners to directly compute the optimal parameters of a TMD in a damped structure subjected to wind excitations. The optimal TMD tuning frequency ratio and damping coefficient for a viscous TMD system installed in a damped structure under 10 white noise excitations are determined by using the time-domain optimization procedure, which minimizes the structural response. By applying a sequence of curve-fitting schemes to the obtained optimal values, design formulas for optimal TMDs are then derived. These are expressed as a function of the mass ratio and damping power-law exponent of the TMD as well as the damping ratio of the structure. The feasibility of the proposed optimal design formulas is verified in terms of formulary accuracy and of comparisons with existing formulas from previous research works. In addition, one numerical example of the Taipei 101 building with a nonlinear TMD, which is redesigned according to the proposed optimal formulas, is illustrated in effort to describe the use of the formulas in the TMD design procedure and to investigate the effectiveness of the optimal TMD. The results indicate that the proposed optimal design formulas provide a convenient and effective approach for designing a viscous TMD installed in a wind-excited damped structure. Copyright © 2011 John Wiley & Sons, Ltd.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Dynamic characteristics of multiple substructures with closely spaced frequencies
Xu, K., & Igusa, T. (1992) · Earthquake Engineering & Structural Dynamics · doi:10.1002/eqe.4290211203 · Cited by 326
Design formulas for tuned mass dampers based on a perturbation technique
Fujino, Y., & Abé, M. (1993) · Earthquake Engineering & Structural Dynamics · doi:10.1002/eqe.4290221002 · Cited by 276 · cited 1×
“Accordingly, a perturbation technique was employed by Fujino and Abe in 1993 [6] to optimize the TMD parameters for a variety of loadings.”
MethodOPTIMUM MULTIPLE TUNED MASS DAMPERS FOR BASE-EXCITED DAMPED MAIN SYSTEM
BAKRE, S. V., & JANGID, R. S. (2004) · International Journal of Structural Stability and Dynamics · doi:10.1142/s0219455404001367 · Cited by 84
Research works printed but not linked: 21
- Den Hartog, 1956, Mechanical vibrations
- Warburton, 1980, Optimum absorber parameters for simple systems, Earthquake Engineering and Structural Dynamics, 8, 197, 10.1002/eqe.4290080302 · DOI · Paper page
- Ayorinde, 1980, Minimizing structural vibrations with absorbers, Earthquake Engineering and Structural Dynamics, 8, 219, 10.1002/eqe.4290080303 · DOI · Paper page
- Warburton, 1982, Optimum absorber parameters for various combinations of response and excitation parameters, Earthquake Engineering and Structural Dynamics, 10, 381, 10.1002/eqe.4290100304 · DOI · Paper page
- Sadek, 1997, A method of estimating the parameters of mass dampers for seismic applications, Earthquake Engineering and Structural Dynamics, 26, 617, 10.1002/(SICI)1096-9845(199706)26:6<617::AID-EQE664>3.0.CO;2-Z · doi:10.1002/(sici)1096-9845(199706)26:6<617::aid-eqe664>3.0.co;2-z
- Bakre, 2005, Optimum parameters of tuned mass damper for damped main system, Structural Control and Health Monitoring, 14, 448, 10.1002/stc.166 · DOI · Paper page
- Tsai, 1993, Optimum tuned-mass dampers for minimizing steady-state response of support-excited and damped systems, Earthquake Engineering and Structural Dynamics, 22, 957, 10.1002/eqe.4290221104 · DOI · Paper page
- Tsai, 1994, Explicit formulae for optimum absorber parameters for force-excited and viscously damped systems, Journal of Sound and Vibration, 176, 585, 10.1006/jsvi.1994.1400 · DOI
- Ghosh, 2005, A closed-form optimal tuning criterion for TMD in damped structures, Structural Control and Health Monitoring, 14, 681, 10.1002/stc.176 · DOI · Paper page
- Iwanami, 1984, Optimum design of dual tuned mass dampers with their effectiveness, Proc. JSME(C), 50, 44, 10.1299/kikaic.50.44 · DOI · Paper page
- Joshi, 1997, Optimum parameters of multiple tuned mass dampers for base-excited damped systems, Journal of Sound and Vibration, 202, 657, 10.1006/jsvi.1996.0859 · DOI
- Hoang, 2005, Design of multiple tuned mass dampers by using a numerical optimizer, Earthquake Engineering and Structural Dynamics, 34, 125, 10.1002/eqe.413 · DOI · Paper page
- Li, 2006, Estimating double tuned mass dampers for structures under ground acceleration using a novel optimum criterion, Journal of Sound and Vibration, 298, 280, 10.1016/j.jsv.2006.05.018 · DOI
- Casciati, 2009, Performance of multi-TMD in the towers of suspension bridges, Journal of Vibration and Control, 15, 821, 10.1177/1077546308091455 · DOI · Paper page
- Inaudi, 1995, Mass damper using friction-dissipating devices, Journal of Engineering Mechanics, 121, 142, 10.1061/(ASCE)0733-9399(1995)121:1(142) · doi:10.1061/(asce)0733-9399(1995)121:1(142
- Ricciardelli, 1999, Tuned vibration absorbers with dry friction damping, Earthquake Engineering and Structural Dynamics, 28, 707, 10.1002/(SICI)1096-9845(199907)28:7<707::AID-EQE836>3.0.CO;2-C · DOI
- Rudinger, 2006, Optimal vibration absorber with nonlinear viscous power law damping and white noise excitation, Journal of Engineering Mechanics (ASCE), 132, 46, 10.1061/(ASCE)0733-9399(2006)132:1(46) · doi:10.1061/(asce)0733-9399(2006)132:1(46 · Paper page
- Rudinger, 2007, Tuned mass damper with nonlinear viscous damping, Journal of Sound and Vibration (ASCE), 300, 932, 10.1016/j.jsv.2006.09.009 · DOI
- Chung, 2009, Optimal design theories of tuned mass dampers with nonlinear viscous damping, Earthquake Engineering and Engineering Vibration, 8, 547, 10.1007/s11803-009-9115-3 · DOI
- Ogata, 1995, Discrete-time control system
- Lee, 2006, Optimal design theories and applications of tuned mass dampers, Engineering Structures, 28, 43, 10.1016/j.engstruct.2005.06.023 · DOI · Paper page
Cited by
Liu, S., Lu, Z., Li, P., Ding, S., & Wan, F. (2020) · Engineering Structures · doi:10.1016/j.engstruct.2020.110531 · Cited by 80
Hybrid active tuned mass dampers for structures under the ground acceleration
Li, C., & Cao, B. (2015) · Structural Control and Health Monitoring · doi:10.1002/stc.1716 · Cited by 49
Chu, S.-Y., Yeh, S.-W., Lu, L.-Y., & Peng, C.-H. (2017) · Structural Control and Health Monitoring · doi:10.1002/stc.1896 · Cited by 20
Chey, M.-H., & Kim, J.-U. (2012) · Frontiers of Structural and Civil Engineering · doi:10.1007/s11709-012-0170-x · Cited by 17
Metadata
- Authors
- Chung, L.-L., Wu, L.-Y., Yang, C.-S. W., Lien, K.-H., Lin, M.-C., & Huang, H.-H.
- Venue
- Structural Control and Health Monitoring
- Publisher
- Hindawi Limited
- Published
- 2011-10-12
- Volume
- 20
- Issue
- 3
- Pages
- 320-336
- ISSN
- 1545-2255 (ISSN-L)
- OpenAlex
- W1956005078
- Cited by
- 59
- References
- 3
- FWCI
- 8.32
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- doi.wiley.com/10.1002/tdm_license_1.1 (tdm, 1420 d)
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.