Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat

The DOI matches its Crossref record; 26 of the 27 references it cites were found in a registry or an index; none of the 14 sources its claims cite is checked for support yet.

A simple global river bankfull width and depth database: Data and Analysis Note

Open access

Abstract

[1] Hydraulic and hydrologic modeling has been moving to larger spatial scales with increased spatial resolution, and such models require a global database of river widths and depths to facilitate accurate river flow routing. Hydraulic geometry relationships have a long history in estimating river channel characteristics as a function of discharge. A simple near-global database of bankfull widths and depths (along with confidence intervals) was developed based on hydraulic geometry equations and the HydroSHEDS hydrography data set. The bankfull width estimates were evaluated with widths derived from Landsat imagery for reaches of nine major rivers, showing errors ranging from 8 to 62% (correlation of 0.88), although it was difficult to verify whether the satellite observations corresponded to bankfull conditions. Bankfull depth estimates were compared with in situ measurements at sites in the Ohio and Willamette rivers, producing a mean error of 24%. The uncertainties in the derivation approach and a number of caveats are identified, and ways to improve the database in the future are discussed. Despite these limitations, this is the first global database that can be used directly in hydraulic models or as a set of constraints in model calibration.

Overview

CoChat Summary

TL;DR

The paper develops a near-global database of bankfull river widths and depths using hydraulic geometry relationships and HydroSHEDS, with 95% confidence intervals. It validates widths against Landsat for nine rivers and depths against in situ measurements in Ohio and Willamette, finding reasonable agreement overall but larger errors for braided/anabranching rivers.

Key findings

  • The database provides global estimates of river widths, depths, and mean annual peak flow with the same spatial coverage as HydroSHEDS, plus 95% confidence intervals for width and depth. Major rivers include the Amazon (maximum mean width 3.6 km), Mississippi (1.1 km), and Congo (1.7 km at the mouth).
  • Width validation against Landsat-derived widths for nine rivers showed errors ranging from 8 to 62%, with a correlation of 0.88; Landsat-derived widths were always within the 95% confidence interval of the estimates. MAEs included Zambezi 8.6%, Ganges 13.9%, Amazon 19.2%, Mississippi 25.6%, Danube 28.1%, Volga 32.7%, Ohio 42.6%, Niger 48.2%, and Brahmaputra 62.4%; no obvious relationship between errors and river size was found.
  • Depth validation gave a mean error of 24% overall; for the Ohio sites, MAE was 0.39 m (31%) with Pearson correlation 0.87, and for the Willamette River, MAE was 0.60 m (13%) with correlation 0.56. Depths were generally overestimated for the Ohio sites, especially at higher bankfull depths.
  • Regressions between discharge and drainage area fit generally well, with R² ranging from 0.74 to 0.99 (mean 0.95). The paper states this is the first global database that can be used directly in hydraulic models or as a set of constraints in model calibration.

Methods

  • Bankfull width and depth were estimated using downstream hydraulic geometry power laws, w = aQ^b and d = cQ^f, with bankfull discharge approximated by the 2-year return period. Discharge–drainage area regressions were developed from GRDC data from 3,843 gauging stations with at least a 10-year record, regionalized by k-means clustering of the Q/A ratio, and applied to HydroSHEDS river reaches.
  • Width and depth were derived using Moody and Troutman (2002) relationships: w = 7.2Q^0.506 (95% CI for coefficient 2.6–20.2) and d = 0.27Q^0.306 (95% CI 0.12–0.63).
  • Validation used Landsat imagery classified with NDWI threshold zero and RivWidth for nine major rivers with less than 5% cloud cover, plus in situ depths from 50 Ohio sites and a March 2002 bathymetric survey of the Willamette River.

Limitations

  • Paper-stated: estimated widths and depths are essentially a function of drainage area, with uncertainties in the Q–A and w–Q or d–Q regressions propagating to final estimates; 95% confidence intervals are provided. Landsat-derived widths may not represent bankfull conditions, though width is relatively insensitive to within-bank discharge variations except for braided rivers. Depth variability from drainage area is difficult to capture, and additional measurements are not readily available. HydroSHEDS coverage is 56°S to 60°N, and the database represents mean bankfull channel geometry without necessarily capturing short-distance downstream variability.
  • Paper-stated: the hydraulic geometry coefficients used are most applicable to stable, single-channel rivers; errors were larger for anabranching or braided reaches, such as the Brahmaputra (MAE 62.4%). Bankfull discharge was approximated by a 2-year flood despite known uncertainties.
  • Evident from the text: validation is limited to nine rivers for width and to Ohio and Willamette sites for depth, so global accuracy is not established, and field verification of bankfull conditions at a global scale is described as impossible.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.1002/wrcr.20440

Cites

26 of 26 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Verification

Claims the paper makes

0 Valid · 0 Not valid · 13 Not checked · 28 Own results and interpretations

14 more claims

Create a free account to see all 41 claims and to verify the 13 references still open.

See all claims — free account
  • Probably not a substantial claim. 10
  • It may state two separate claims as one. 18

Create a free account to see these claims.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

Each contradiction between two passages listed here was confirmed by an independent check.

1 of 1

Citations

Cites

Show all 27 references

Research works printed but not linked: 3

  1. Global Runoff Data Centre, 2011, Long-Term Mean Monthly Discharges and Annual Characteristics of GRDC Station/Global Runoff Data Centre
  2. Sherwood, 2005, Sci. Invest. Rep. 2005-5153, 38
  3. Sullivan, 2004, Sci. Invest. Rep. 2004-5001, 35

Cited by

Items 101–200 of 295

Metadata

Authors
Andreadis, K. M., Schumann, G. J.-P., & Pavelsky, T.
Affiliations
  • California Institute of Technology (US)
  • University of North Carolina at Chapel Hill (US)
Corresponding author
Andreadis, Konstantinos M.
Venue
Water Resources Research
Published
2013-10
Volume
49
Issue
10
Pages
7164-7168
ISSN
0043-1397 (ISSN-L)
OpenAlex
W1826913668
Cited by
295
References
27
Citations by year
2026: 23 · 2025: 23 · 2024: 24 · 2023: 35 · 2022: 43 · 2021: 35 · 2020: 37 · 2019: 27 · 2018: 20 · 2017: 8 · 2016: 5 · 2015: 6 · 2014: 6 · 2013: 3
FWCI
6.47
Type
journal article
Language
en
Open access
Licence
Locations
  • Water Resources Research (publishedVersion)
  • Carolina Digital Repository (University of North Carolina at Chapel Hill) (submittedVersion)
  • UNC Libraries
Funders
NASA New Investigator Program (NNX12AQ77G)
Topics
  • Physical Sciences › Earth and Planetary Sciences › Earth-Surface Processes › Hydrology and Sediment Transport Processes
  • Physical Sciences › Environmental Science › Water Science and Technology › Hydrology and Watershed Management Studies
  • Physical Sciences › Environmental Science › Global and Planetary Change › Flood Risk Assessment and Management
Keywords
bankfull width, bankfull depth, hydraulic geometry, river channel characteristics, HydroSHEDS, Landsat imagery, river flow routing, hydraulic modeling, model calibration, uncertainty estimation, Ohio River, Willamette River

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

A language model drew the claims from the paper on 2026-11-18, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-11-18 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.