CoChat
Sign Up
Cited by 59High-Temperature Coating BehaviorsHigh Temperature Alloys and CreepIntermetallics and Advanced Alloy Properties

The DOI matches its Crossref record.

Current limitations of high-temperature alloys in practical applications

Stringer, John, Wright, Ian G.·1995·Oxidation of Metals
DOI 10.1007/bf01046730
Open this paper in CoChat — free account

Overview

Integrity signals

Registry

Crossref · 10.1007/bf01046730

Cites

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

We couldn’t retrieve this paper’s full text, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

  • Corrosion data analysis through statistical methods was proven to provide a good basis for corrosion model development and validation.

    “Corrosion data analysis through statistical methods was proven to provide good basis for corrosion model development and validation [33,34].”

    From Fireside corrosion and deposition on heat exchangers in biomass combustion systems (2023) · cites this paper as [34]

Citations

Cites

No references could be resolved yet.

Research works printed but not linked: 64

  1. C. T. Sims, N. S. Stoloff, and W. C. Hagel (eds),Superalloys II (Wiley, New York, 1987).
  2. M. Gell, C. S. Kortovich, R. H. Bricknell, W. B. Kent, and J. F. Radavich (eds), inSuperalloys 1984 (Metallurgical Society of AIME, Warrendale, PA, 1984), pp. 245?273.
  3. W. J. Molloy,Adv. Mat. Proc. October, 23 (1990).
  4. C. T. Sims and W. C. Hagel,The Superalloys (Wiley, New York, 1972).
  5. R. F. Decker, J. P. Rowe, and J. W. Freeman, NACA Technical Note 4049 (Washington, D.C., 1957); quoted in Ref.1, C. T. Sims, N. S. Stoloff, and W. C. Hagel (eds),Superalloys II (Wiley, New York, 1987, p. 62.
  6. F. L. VerSnyder and R. W. Guard.Trans. AMS 52, 485 (1960).
  7. J. Stringer and R. Viswanathan,Advanced Materials and Coatings for Combustion Turbines, V. P. Swaminathan and N. S. Cheruvu (eds) (ASM International, Materials Park, Ohio, 1994), pp. 1?21.
  8. M. Gell and G. R. Leverant,Trans. AIME 242, 1869 (1968).
  9. G. R. Leverant and M. Gell,Trans. AIME 245, 1167?1173 (1969).
  10. K. Harris, W. D. Brentnallet al. Proc. Seventh International Symposium on Superalloys, Seven Springs, 1992.
  11. F. L. VerSnyder, inHigh Temperature Alloys For Gas Turbines, R. Brunetaud et al. (eds) (Riedel, Dordrecht, 1982), p. 1.
  12. M. McLean and F. Schubert, inHigh Temperature Alloy For Gas Turbines, D. Coutsouradis et al. (eds) (Applied Science Publishers, London, 1978), p. 423.
  13. W. Crawford, inFrontiers of High Temperature Materials II Conf. Procedings (INCO Alloys International, London, 1983). p. 272.
  14. G. Lehnert and H. W. Meinhardt,Electrodeposition Surf. Treat. 1, 189?197 (1972). · DOI
  15. G. W. Goward, Proc. Conf. Protective Coating Systems for High-Temperature Gas Turbine Components,Mat. Sci. Tech. 2, 194?200 (1986). · DOI
  16. H. L. Bernstein, J. A. Russell S. T. Scheirer, L. L. Hsu, and M. van Roode,Guidebook and Software for Specifying High Temperature Coatings for Combustion Turbines, EPRI Report GS 7334-L (Electric Power Research Institute, Palo Alto, California, 1991).
  17. S. C. Stultz and J. B. Kitto (eds),Steam: Its Generation and Use, 40th ed. (The Babcock and Wilcox Company, Barberton, Ohio, 1992).
  18. S. B. Bennett,Engineering Assessment of an Advanced Pulverized-Coal Power Plant, EPRI Report CS-2223 (Electric Power Research Institute, Palo Alto, California, 1982).
  19. G. M. Yasenchak, et al.,Engineering Assessment of an Advanced Pulverized-Coal Power Plant, EPRI Report CS-2555 (Electric Power Research Institute, Palo Alto, California, 1983).
  20. Gilbert Associates, Inc.,Development Plan for Advanced Fossil Fuel Power Plants, EPRI Report CS-4029 (Electric Power Research Institute, Palo Alto, California, 1985).
  21. A. F. Armor, W. T. Bakker, R. I., Jaffee, and G. L. Touchton (eds),First International Conference on Improved Coal-Fired Power Plants, EPRI Publication CS-5581-SR (Electric Power Research Institute, Palo Alto, California, 1988).
  22. G. L. Touchton,EPRI Improved Coal-Fired Power Plant Project, pp. 1-39?1-72in Ref. 21.
  23. J. R. DiStefano, J. H. DeVan and L C. Fuller,Assessment of Material Requirements for Advanced Steam Cycle Systems (>1100?F), ORNL/TM-10489 (Oak Ridge National Laboratory, Oak Ridge, Tennessee, 1988).
  24. R. Swindeman, R. R. Judkins and R. A. Bradley,Investigation of Alloys for Advanced Steam Cycle Superheaters and Reheaters, pp. 5-147?5-165 in Ref. 21.
  25. R. B. Dooley,Proc. Int. Conf. on Bioler Tube Failures in Fossil Plants, Report TR-100493 (Electric Power Research Institute, Palo Alto, California, 1992).
  26. North American Electric Reliability Council, quoted inBoiler Tube Failure Metallurgical Guide Volume 1: Technical Report, S. R. Paterson, T. A. Kuntz, R. S. Moser, and H. Valillancourt EPRI Research Report TR-102433-V1 (Electric Power Research Institute, Palo Alto, California, 1993).
  27. W. T. Reid,External Corrosion and Deposits: Boilers and Gas Turbines (Elsevier, New York, 1971).
  28. E. H. Manny and P. S. Natanson, Proc. Joint Symposium on Stationary Combustion NOx Control. Vol. II: Utility Boiler NOx Control by Combustion Modification, Report No. PB-81-236127, CONF-8010379-Vol. 2, EPA, 1981, pp. 126?175.
  29. W. T. Reid, R. C. Corey, and B. J. Cross,Trans. ASME 67, 279, (1945).
  30. A. J. B. Cutler, T. P. Flatley, and K. A. Hay,Fire-Side Corrosion in Power-Station Boilers, CEGB Research, No. 8, 1978, pp. 12?26.
  31. D. B. Meadowcroft and M. I. Manning (eds),Corrosion-Resistant Materials for Coal Conversion Systems (Applied Science Publishers, London, 1983).
  32. D. N. French, Paper no. 133, presented at NACE Conf. Corrosion/88, St. Louis, MO, 1988.
  33. R. B. Dooley, Paper No. 1-1 in Proc. Int. Conf. on Boiler Tube Failures in Fossil Plants, R. B. Dooley (ed.) EPRITR-100493 (Electric Power Research Institute, 1992).
  34. H. J. Cialone and I. G. Wright, inBTF Failures in Fossil Plants, R. B. Dooley, and D. Droske (eds) EPRI Report No. CS 5500SR (Electric Power Research Institute, Palo Alto, California, 1988), pp. 2?73.
  35. I. G. Wright, D. Anson, H. J. Cialone, G. O. Davis, M. D. Kurre, and F. B. Stulen, Paper 3-1 in Proc. Int. Conf. on Bioler Tube Failures in Fossil Plants, R. B. Dooley (ed.) EPRI TR-100493 (Electric Power Research Institute, 1992).
  36. M. E. Shitsman, M. V. Gurychev, Y. I. Timoffeev, and L. S. Midler,Teploenergetika 24(5), 30?33 (1977).
  37. T. P. Flatley, E. P. Latham, and C. W. Morris, inAdvances in Material Technology for Fossil Power Plants, R. Viswanathan and R. I. Jaffee (eds) (ASM International, 1987), pp. 219?229.
  38. H. E. Crossley,J. Inst. Fuel 36, 228?239 (1963).
  39. R. J. Bishop,J. Inst. Fuel 41, 51?65 (1968).
  40. W. Nelson and C. Cain, Jr.,Trans. ASME, J. Eng. Power 82 (Series A), 194 (1960). · DOI
  41. R. W. Borio, A. L. Plumley, and W. R. Sylvester, Proc. Int. Conf. on Ash Deposition and Corrosion from Impurities in Combustion Gases, Henniker, NH, 1977; CE Publication No. TIS-5055.
  42. A. J. B. Cutler and E. Raask,Corros. Sci. 21, 789?800 (1981). · DOI
  43. R. C. Corey, B. J. Cross, and W. T. Reid,Trans. ASME 67, 789?800 (1981)
  44. C. Cain, Jr., and W. Nelson,Trans. ASME, J. Eng. Power,83 (Series A), 468 (1961). · DOI
  45. S. Kihara, T. Isozaki, and A. Ohtomo, in Proc. JIMIS-3 High-Temperature Corrosion, Tokyo, Japan, 1982, p. 655.
  46. I. Rehn,Corrosion Problems in Coal-Fired Boiler Superheater and Reheater Tubes, EPRI Report CS-1653 (Electric Power Research Institute, Palo Alto, California, 1980). · DOI
  47. L. M. Wyatt, Paper No. 4 of VGB Conference on Flue Gas Corrosion and Deposits in Thermal Power Stations, Essen, 1977.
  48. J. Stringer and D. D. Banerjee (eds),Chlorine in Coal (Elsevier, Amsterdam, 1991).
  49. D. R. Holmes and D. B. Meadowcroft, Symp. Thermal Utilities Boiler Reliability (McMaster Univ., Hamilton, Ontario, 1983).
  50. P. Mayer, and A. V. Manolescu, and S. J. Thorpe, inCorrosion Resistant Materials for Coal Conversion Systems, D. B. Meadowcroft and M. I. Manning (eds) (Applied Science Publishers, London, 1983), pp. 87?103.
  51. A. L. Plumley, J. I. Accortt, and W. R. Roczniak, Results from DOE Contract E (49-18)-2045, reported at NACE-DOE Corrosion-Erosion Conference, Berkeley, CA, 1979, Combustion Engineering Paper TIS-6105.
  52. H. Fujikawa and H. Makiura,J. Mater. Energy Syst. 4(3), 160?167 (1982). · DOI
  53. E. P. Latham, T. Flatley, and C. W. Morris, inCorrosion Resistant Materials for Coal Conversion Systems, D. B. Meadowcroft and M. I. Manning (eds) (Applied Science Publishers, London, 1983), pp. 137?158.
  54. I. M. Rehn,Laboratory Fire-Side Corrosion Evaluation of Improved Superheater Tube Alloys and Coatings, EPRI CS-3134 (Electric Power Research Institute, Palo Alto, California, 1983).
  55. Cool Water Coal Gasification Program, EPRI Report GS-6806 (Electric Power Research Institute, Palo Alto, California, 1990). For an overall summary of the materials progam, see M. E. Fahrion,Mater. High Temp. 11, 107?112 (1993). · DOI
  56. H. de Winter and W. Willeboer, Proc. 13th EPRI Conf. on Gasification Power Plants, 1994.
  57. W. T. Bakker,Mater. High Temp. 11 (1?4), 81?89 (1993). · DOI
  58. K. Natesan, inCorrosion-Erosion-Wear in Emerging Fossil Energy Systems, A. Levy, ed. (NACE International, Houston, Texas, 1982), p. 100.
  59. R. A. Perkins,Materials for Syngas Coolers, EPRI Report No. AP-2518 (Electric Power Research Institute, Palo Alto, California, 1982).
  60. R. A. Perkins,Corrosion Chemistry in Low Oxygen Activity Atmospheres, EPRI Report No. FP-1280 (Electric Power Research Institute, Palo Alto, California, 1979).
  61. W. T. Bakker and R. A. Perkins,Corrosion-Erosion-Wear at Elevated Temperatures, A. Levy (ed.) (NACE International, Houston, Texas, 1991).
  62. M. E. Fahrion, inMaterials for Coal Gasification, W. T. Bakker (ed.) (ASM International, Metals Park, Ohio, 1988), p. 187.
  63. J. van Liere et al., inMaterials for Coal Gasification, W. T. Bakker (ed.) (ASM International, Metals Park, Ohio, 1988), p. 211.
  64. R. A. Perkins and A. Sarosiek,Downtime Corrosion in Syngas Coolers of Entrained Slagging Gasifiers, EPRI Report No. AP-5966 (Electric Power Research Institute, Palo Alto, California, 1988).

Cited by

Sorted by citations

Metadata

Authors
Stringer, J., & Wright, I. G.
Affiliations
  • Electric Power Research Institute (US)
  • Oak Ridge National Laboratory (US)
ORCID
Wright, Ian G.
Venue
Oxidation of Metals
Publisher
Springer Science and Business Media LLC
Published
1995-08
Volume
44
Issue
1-2
Pages
265-308
ISSN
  • 0030-770X (ISSN-L)
  • 1573-4889
DOI
10.1007/bf01046730
OpenAlex
W2023987857
Cited by
59
References
0
Citations by year
2025: 2 · 2024: 1 · 2023: 2 · 2022: 4 · 2021: 4 · 2019: 3 · 2018: 2 · 2017: 2 · 2016: 3 · 2015: 6 · 2014: 2 · 2013: 9
FWCI
0.00
Type
journal article
Language
en
Open access
closed
Licence
www.springer.com/tdm (tdm)
Locations
Oxidation of Metals (publishedVersion)
Topics
  • Physical Sciences › Materials Science › Surfaces, Coatings and Films › High-Temperature Coating Behaviors
  • Physical Sciences › Engineering › Mechanical Engineering › High Temperature Alloys and Creep
  • Physical Sciences › Engineering › Mechanical Engineering › Intermetallics and Advanced Alloy Properties
Keywords
high-temperature alloys, oxidation, high-temperature corrosion, electric utilities, aggressive environments, materials development

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review