The DOI matches its Crossref record; 34 of the 34 references it cites were found in a registry or an index.
Fireside Corrosion of Heat Exchanger Materials for Advanced Solid Fuel Fired Power Plants
Open accessAbstract
To address the challenge of climate change, future energy systems need to have reduced greenhouse gas emissions and increased efficiencies. For solid fuel fired combustion plants, one route towards achieving this is to increase the system’s steam temperatures and pressures. Another route is to co-fire renewable fuels (such as biomass) with coals. Fireside corrosion performance of two candidate superheater/reheater alloys has been characterised at higher heat exchanger surface temperature. Samples of the alloys (a stainless steel, Sanicro 25 and a nickel-based alloy, IN740) were exposed in fireside corrosion tests at 650 °C, 700 °C and 750 °C, in controlled atmosphere furnaces using the ‘deposit recoat’ test method to simulate superheater/reheater exposure for 1000 h. After exposure, the samples were analysed using dimensional metrology to determine the extent and distributions of corrosion damage in terms of surface recession and internal damage. At 650 °C, the stainless steel and nickel-based alloy performed similarly, while at 700 °C and above, the median damage to the steel was at least 3 times greater than for the nickel-based alloy. Optical and electronic microscopy studies were used to study samples’ damage morphologies after exposure. Intergranular damage and pits were found in sample cross sections, while chromium depletion was found in areas with internal damage. For high-temperature applications, the higher cost of the nickel-based alloy could be offset by the longer life they would allow in plant with higher operating temperatures.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“The fireside corrosion of power plant heat exchangers is known to be very dependent on the combustion environment chemistry, as already shown [13,14], with the corrosion damage exhibiting a well-known 'bell shape' distribution as function of metal surface temperature [13,14].”
From Fireside corrosion and deposition on heat exchangers in biomass combustion systems (2023) · cites this paper as [14]
The cited source says what the claim attributes to it.
In the citing paper
“It was seen that the Cl content could have a significant impact on the extent of degradation on heat-exchanger materials [14].”
From Fireside corrosion and deposition on heat exchangers in biomass combustion systems (2023) · cites this paper as [14]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
(2014) · Climate Change 2013 – The Physical Science Basis · doi:10.1017/cbo9781107415324.004 · Cited by 23,880
Co-firing of coal and biomass fuel blends
Sami, M., Annamalai, K., & Wooldridge, M. (2001) · Progress in Energy and Combustion Science · doi:10.1016/s0360-1285(00)00020-4 · Cited by 838
Grain size distribution effects on the corrosion behaviour of materials
Gollapudi, S. (2012) · Corrosion Science · doi:10.1016/j.corsci.2012.04.040 · Cited by 374
Diffusion Cells and Chemical Failure of MCrAlY Bond Coats in Thermal-Barrier Coating Systems
Evans, H. E., & Taylor, M. P. (2001) · Oxidation of Metals · doi:10.1023/a:1010369024142 · Cited by 188
Ash Deposition in Biomass Combustion or Co-Firing for Power/Heat Generation
Shao, Y., Wang, J., Preto, F., Zhu, J., & Xu, C. (2012) · Energies · doi:10.3390/en5125171 · Cited by 178
Fireside corrosion of superheaters: Effects of air and oxy-firing of coal and biomass
Syed, A. U., Simms, N. J., & Oakey, J. E. (2011) · Fuel · doi:10.1016/j.fuel.2011.03.010 · Cited by 117
Self-citationGrain-Size Effects on the High-Temperature Oxidation Behaviour of Chromium Steels
Trindade, V., Christ, H., & Krupp, U. (2010) · Oxidation of Metals · doi:10.1007/s11085-010-9192-8 · Cited by 114
Jonsson, T., Karlsson, S., Hooshyar, H., Sattari, M., Liske, J., Svensson, J.-E., & Johansson, L.-G. (2016) · Oxidation of Metals · doi:10.1007/s11085-016-9610-7 · Cited by 103
Stein-Brzozowska, G., Flórez, D. M., Maier, J., & Scheffknecht, G. (2012) · Fuel · doi:10.1016/j.fuel.2012.11.081 · Cited by 96
Chai, G., Boström, M., Olaison, M., & Forsberg, U. (2013) · Procedia Engineering · doi:10.1016/j.proeng.2013.03.248 · Cited by 80
Research works printed but not linked: 2
- Conference I, Interaction C. No Title. 2012.
- S. R. J. Saunders and H. J. Grabke DBM. Guidelines for methods of testing and research in high temperature corrosion, The Institute of Metals, London. 1995;85.
Cited by
Effect of temperature on hot corrosion of nickel-based alloys for 700 °C A-USC power plants
Pan, P., Li, T., Wang, Y., Zhang, N., & Chen, H. (2022) · Corrosion Science · doi:10.1016/j.corsci.2022.110350 · Cited by 42
Fireside corrosion and deposition on heat exchangers in biomass combustion systems
Mori, S., Sanusi, T., Simms, N., & Sumner, J. (2023) · Materials at High Temperatures · doi:10.1080/09603409.2022.2138007 · Cited by 8
“It was seen that the Cl content could have a significant impact on the extent of degradation on heat-exchanger materials [14].”
BackgroundSelf-citationFireside and steamside performance in biomass power plant
Mori, S., Sumner, J., Bouvet, J., & Simms, N. J. (2022) · Materials at High Temperatures · doi:10.1080/09603409.2021.2019657 · Cited by 5
“change found in a previous study looking at the accelerated fireside corrosion of this material under co-firing conditions (median damage around 300 μm [35],).”
BackgroundResultSelf-citationIn Situ Thermogravimetric Analysis of Curved Surfaces During High-Temperature Oxidation
Kendall, M., Auinger, M., Robinson, C. L. J., Owen, C., & Sackett, E. E. (2025) · Materials · doi:10.3390/ma18112463 · Cited by 3
Usman, A., Isern, L., Nicholls, J. R., Cordero-Cabrera, M. C., & Syed, A. U. (2025) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-025-11630-7 · Cited by 3
Metadata
- Authors
- Mori, S., Pidcock, A., Sumner, J., Simms, N., & Oakey, J.
- Affiliations
- Cranfield University (GB)
- Corresponding author
- Mori, Stefano
- Venue
- Oxidation of Metals
- Published
- 2021-12-18
- Volume
- 97
- Issue
- 3-4
- Pages
- 281-306
- ISSN
- 0030-770X (ISSN-L)
- 1573-4889
- OpenAlex
- W4200539153
- Cited by
- 11
- References
- 34
- Citations by year
- 2026: 4 · 2025: 3 · 2023: 1 · 2022: 3
- FWCI
- 0.52
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Licence
- cc-by
- creativecommons.org/licenses/by/4.0 (tdm)
- creativecommons.org/licenses/by/4.0 (vor)
- Locations
- Oxidation of Metals (publishedVersion, cc-by)
- CERES (Cranfield University) (submittedVersion, cc-by)
- Funders
- EU Research Fund for Coal and Steel (RFCS-2015/709954)
- Topics
- Physical Sciences › Materials Science › Surfaces, Coatings and Films › High-Temperature Coating Behaviors
- Physical Sciences › Engineering › Mechanical Engineering › High Temperature Alloys and Creep
- Physical Sciences › Materials Science › Materials Chemistry › Material Properties and Failure Mechanisms
- Keywords
- fireside corrosion, heat exchanger materials, Sanicro 25, biomass co-firing, high-temperature corrosion, intergranular damage, chromium depletion, service life
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Fireside Corrosion of Heat Exchanger Materials for Advanced Solid Fuel Fired Power Plants. https://app.cochat.ai/papers/10.1007/s11085-021-10094-z
- The paper
- Mori, S., Pidcock, A., Sumner, J., Simms, N., & Oakey, J. (2022). Fireside Corrosion of Heat Exchanger Materials for Advanced Solid Fuel Fired Power Plants. Oxidation of Metals. https://doi.org/10.1007/s11085-021-10094-z
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.