Current and future trends in topology optimization for additive manufacturing
Open accessThe DOI matches its Crossref record; 282 of the 282 references it cites were found in a registry or an index.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“It finds particular application in AM due to the manufacturing freedoms of the AM technologies, allowing optimization of shape and geometry for highly efficient designs with internal components and intricate features that are not feasible otherwise [106,107].”
From Metal additive manufacturing in aerospace: A review (2021) · cites this paper as [107]
Citations
Cites
Items 201–282 of 282
Topology optimization considering fracture mechanics behaviors at specified locations
Kang, Z., Liu, P., & Li, M. (2016) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-016-1623-y · Cited by 71 · cited 2×
“Kang et al. (2017) proposed a topology optimization method to generate cracks insensitive/sensitive designs based on a linear elastic fracture model.”
MethodSelf-citationOn finding the optimal distribution of material properties
RINGERTZ, U. T. (1993) · Structural and Multidisciplinary Optimization · doi:10.1007/bf01743590 · Cited by 68 · cited 1×
“Another future exploration direction is the so-called free material optimization (e.g. (Ringertz 1993; Bendsoe et al. 1994)).”
BackgroundTakezawa, A., Koizumi, Y., & Kobashi, M. (2017) · Additive manufacturing · doi:10.1016/j.addma.2017.10.004 · Cited by 68 · cited 1×
“34 [124] Takezawa A, Koizumi Y, Kobashi M.”
Self-citationA unified framework for nonlinear path‐dependent sensitivity analysis in topology optimization
Alberdi, R., Zhang, G., Li, L., & Khandelwal, K. (2018) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.5794 · Cited by 68
Self-citationParallel computing techniques applied to the simultaneous design of structure and material
Coelho, P. G., Cardoso, J. B., Fernandes, P. R., & Rodrigues, H. C. (2010) · Advances in Engineering Software · doi:10.1016/j.advengsoft.2010.10.003 · Cited by 66 · cited 4×
“…et al. 2013a; Niu et al. 2009; Guo et al. 2015; Deng et al. 2013; Fujii et al. 2001; Zhang and Sun 2006; Liu et al. 2008) and heterogeneous (Coelho et al. 2008, 2011; Rodrigues et al. 2002; Xia and Breitkopf 2014, 2015; Wang et al. 2017c; Sivapuram et al. 2016) lattice infill have been…”
BackgroundInfluentialStress-constrained topology optimization: a topological level-set approach
Suresh, K., & Takalloozadeh, M. (2013) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-013-0899-4 · Cited by 66 · cited 2×
“In (Mirzendehdel et al. 2017), the latter was addressed by replacing conventional von Mises stress criterion (Suresh and Takalloozadeh 2013) with the Tsai-Wu stress criterion.”
MethodSelf-citationTopology optimization of finite strain viscoplastic systems under transient loads
Ivarsson, N., Wallin, M., & Tortorelli, D. A. (2018) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.5789 · Cited by 66
Topology optimization of geometrically nonlinear structures and compliant mechanisms
Bruns, T. E., & Tortorelli, D. A. (1998) · AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference (MAO) · doi:10.2514/6.1998-4950 · Cited by 63 · cited 6×
“The important ones include internal nodal forces exclusion scheme by Buhl et al. (2000) and Pedersen et al. (2001), element removal and reintroduction scheme by Bruns and Tortorelli (1998), connectivity parametrization by Yoon and Kim (2005), improved nonlinear solver via Levenberg-Marquardt method by Kawamoto (2009),…”
MethodInfluentialMandil, G., Le, V. T., Paris, H., & Suard, M. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-8049-3 · Cited by 62 · cited 3×
“Other than the additive-subtractive combination, design for product upgrade by removing and adding features is also promising, as AM can add features to an existing component (Mandil et al. 2016).”
BackgroundDesign of fracture resistant energy absorbing structures using elastoplastic topology optimization
Li, L., & Khandelwal, K. (2017) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-017-1735-z · Cited by 62 · cited 2×
“In the work recently proposed by Li et al. (2017b), Li and Khandelwal (2017), Alberdi and Khandelwal (2017), coupled and uncoupled damage models were incorporated into elastoplastic topology optimization for damage-resistant energy absorption structure designs.”
MethodSelf-citationTakezawa, A., Kobashi, M., Koizumi, Y., & Kitamura, M. (2016) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2016.10.006 · Cited by 61 · cited 2×
“[123] Takezawa A, Kobashi M, Koizumi Y, Kitamura M.”
BackgroundSelf-citationA review of synthesis methods for additive manufacturing
Rosen, D. W. (2016) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1240208 · Cited by 60 · cited 3×
“On the other hand, it is still an issue to improve the numerical analysis accuracy around the interface areas [157] and reflect the actual behavior of printed materials [158,159].”
BackgroundApplication of layout optimization to the design of additively manufactured metallic components
Smith, C. J., Gilbert, M., Todd, I., & Derguti, F. (2016) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-016-1426-1 · Cited by 60 · cited 2×
“In summary, we have seen significant research achievements in the past few years and also the numerous successful printings of the topological designs (Cheng et al. 2017; Vogiatzis et al. 2017a; Gaynor et al. 2014; Maute et al. 2015; Meisel and Williams 2015; Dede et al. 2015; Smith et al. 2016).”
BackgroundStructural shape and topology optimization of cast parts using level set method
Wang, Y., & Kang, Z. (2017) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.5503 · Cited by 60 · cited 3×
“…machining and injection molding, the length scale issue (Allaire et al. 2016; Guest 2009; Guest et al. 2004; Guo et al. 2014a; Poulsen 2003; Zhang et al. 2014) no-undercut restriction (Xia et al. 2010; Wang and Kang 2017), and featuredriven design (Liu andMa 2015) have been the primary focus.”
BackgroundMethodSelf-citationTopology optimization of unconstrained damping treatments for plates
Elsabbagh, A., & Baz, A. M. S. (2013) · Engineering Optimization · doi:10.1080/0305215x.2013.832235 · Cited by 59
Park, S.-I., & Rosen, D. W. (2016) · Additive manufacturing · doi:10.1016/j.addma.2016.05.006 · Cited by 59 · cited 1×
“Because of the layer-by-layer printing process, the struts are not perfect cylinders; instead, staggered boundary profile is produced and the defect is magnified with a reducing diameter (Gorguluarslan et al. 2015; Reinhart and Teufelhart 2013; Reinhart et al. 2012; Park and Rosen 2016).”
BackgroundLevel set topology optimization of structural problems with interface cohesion
Behrou, R., Lawry, M., & Maute, K. K. (2017) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.5540 · Cited by 59 · cited 2×
“to maintain the integrity of the structure (Liu et al. 2016; Behrou et al. 2017).”
BackgroundFracture resistance via topology optimization
Challis, V. J., Roberts, A. P., & Wilkins, A. (2007) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-007-0160-0 · Cited by 58 · cited 4×
“[197] proposed a level-set based topology optimization method for brittle elastic fracture resistant designs, wherein the fracture is evaluated by the energy release rate of crack propagation.”
BackgroundInfluentialA novel CACD/CAD/CAE integrated design framework for fiber-reinforced plastic parts
Liu, J., Ma, Y., Fu, J., & Duke, K. (2015) · Advances in Engineering Software · doi:10.1016/j.advengsoft.2015.04.013 · Cited by 58
Self-citationA Pareto-Optimal Approach to Multimaterial Topology Optimization
Mirzendehdel, A. M., & Suresh, K. (2015) · Journal of Mechanical Design · doi:10.1115/1.4031088 · Cited by 57 · cited 2×
“Instead, in (Mirzendehdel and Suresh 2015), the compliance and total mass were treated as conflicting objectives, and the corresponding Pareto curve was traced; no constraint was imposed on the material composition.”
BackgroundSelf-citationKang, Z., Wang, Y., & Wang, Y. (2016) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2016.04.001 · Cited by 56 · cited 1×
“Therein, geometrical constraints, including but not limited to non-overlap, shape-preserving and minimum distance constraints among the embedded components, are often to be observed to avoid possible interference of different functionalities [222,223].”
BackgroundSelf-citationMultiphase material optimization for fiber reinforced composites with strain softening
Kato, J., Lipka, A., & Ramm, E. (2008) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-008-0315-7 · Cited by 55 · cited 1×
“For a continuous damage model considering single- and multi-material, readers are referred to the studies by Kato et al. (2009), Kato and Ramm (2013), Amir (2013).”
BackgroundSelf-citationGPU-based offset surface computation using point samples
Wang, C. C. L., & Manocha, D. (2012) · Computer-Aided Design · doi:10.1016/j.cad.2012.10.015 · Cited by 55 · cited 1×
“Efforts have been made by Wang and others (Wang and Manocha 2013; Wang et al. 2010) to conduct highly parallel algorithms running on many-core GPUs to improve the efficiency.”
BackgroundSelf-citationLee, J., & Lee, K. (2016) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-016-9239-3 · Cited by 55 · cited 2×
“2014) and grid-patterned interior (Lee and Lee 2017; Lee et al. 2017) structures.”
BackgroundAlberdi, R., & Khandelwal, K. (2017) · Finite Elements in Analysis and Design · doi:10.1016/j.finel.2017.05.004 · Cited by 54 · cited 1×
“In the work recently proposed by Li et al. (2017b), Li and Khandelwal (2017), Alberdi and Khandelwal (2017), coupled and uncoupled damage models were incorporated into elastoplastic topology optimization for damage-resistant energy absorption structure designs.”
Panesar, A. S., Brackett, D., Ashcroft, I., Wildman, R. D., & Hague, R. (2015) · Journal of Mechanical Design · doi:10.1115/1.4030996 · Cited by 53 · cited 2×
“An interesting example was presented by Panesar et al., who developed a topology optimization framework for the design of functional structural systems to be made using multi-material AM processes (Panesar et al. 2015).”
BackgroundKoizumi, Y., Okazaki, A., Chiba, A., Kato, T., & Takezawa, A. (2016) · Additive manufacturing · doi:10.1016/j.addma.2016.06.001 · Cited by 53 · cited 1×
“The study on basic physical properties of thermal conductivity, stiffness, and strength are still active even recently (Lin et al. 2007; Xiao et al. 2013; Koizumi et al. 2016; Takezawa et al. 2017a, 2017b).”
BackgroundSelf-citationA multiple level set method for modeling grain boundary evolution of polycrystalline materials
Zhang, X., Chen, J., & Osher, S. (2008) · Interaction and multiscale mechanics · doi:10.12989/imm.2008.1.2.191 · Cited by 52 · cited 2×
“The RLSM was first introduced by (Merriman et al. 1994; Zhang et al. 2008) for modeling multiphase flow and was later applied to multi-material topology optimization of smart energy harvesters (Chen et al. 2010) and metamaterials (Vogiatzis et al. 2017a).”
MethodDesign of piezoelectric multi-actuated microtools using topology optimization
Carbonari, R. C., Silva, E. C. N., & Nishiwaki, S. (2005) · Smart Materials and Structures · doi:10.1088/0964-1726/14/6/036 · Cited by 52 · cited 2×
“[228] Carbonari RC, Silva ECN, Nishiwaki S.”
BackgroundDesign sensitivity analysis of elastoplastic structures
Ohsaki, M., & Arora, J. S. (1994) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.1620370503 · Cited by 52 · cited 3×
“In early works, the general formulation of sensitivity analysis was introduced by, for example, these studies (Ryu et al. 1985; Tsay and Arora 1989, 1990; Vidal and Haber 1993; Vidal et al. 1991; Tortorelli 1992; Kleiber and Kowalczyk 1996; Michaleris et al. 1994).”
BackgroundSensitivity analysis for non‐linear constrained elastostatic systems
Tortorelli, D. A. (1992) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.1620330807 · Cited by 52 · cited 2×
“In early works, the general formulation of sensitivity analysis was introduced by, for example, these studies (Ryu et al. 1985; Tsay and Arora 1989, 1990; Vidal and Haber 1993; Vidal et al. 1991; Tortorelli 1992; Kleiber and Kowalczyk 1996; Michaleris et al. 1994).”
MethodKang, Z., Wang, R., & Tong, L. (2011) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2011.01.005 · Cited by 52 · cited 2×
“…actuators and active vibration control structures, have been well studied using multi-material topology optimization formulations (Carbonari et al. 2009, 2005; Kang et al. 2011), or integrated optimization of structural topology and control parameters (Zhan and Tong 2008; Zhang and Kang 2014).”
MethodSelf-citationXiao, D., Yang, Y., Su, X., Wang, D., & Sun, J. (2013) · Bio-Medical Materials and Engineering · doi:10.3233/bme-130765 · Cited by 51 · cited 4×
“[121] Xiao D, Yang Y, Su X, Wang D, Sun J.”
BackgroundInfluentialGÖRGÜLÜARSLAN, R. M., Park, S.-I., Rosen, D. W., & Choi, S.-K. (2015) · Journal of Mechanical Design · doi:10.1115/1.4031012 · Cited by 51 · cited 2×
“Because of the layer-by-layer printing process, the struts are not perfect cylinders; instead, staggered boundary profile is produced and the defect is magnified with a reducing diameter (Gorguluarslan et al. 2015; Reinhart and Teufelhart 2013; Reinhart et al. 2012; Park and Rosen 2016).”
BackgroundIntersection-Free and Topologically Faithful Slicing of Implicit Solid
Huang, P., Wang, C. C. L., & Chen, Y. (2013) · Journal of Computing and Information Science in Engineering · doi:10.1115/1.4024067 · Cited by 50
Self-citationTopology optimization for hybrid additive-subtractive manufacturing
Liu, J., & To, A. C. (2016) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-016-1565-4 · Cited by 50 · cited 7×
“…perspective, the following issues on topology optimization for hybrid manufacturing are highlighted below: i) A limitation remains for the method in (Liu and To 2016) that, the casting-SIMP method only supports the material changes in the three axial directions, while for complex parts, inserting…”
BackgroundMethodInfluentialSelf-citationZhang, G., Li, L., & Khandelwal, K. (2016) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-016-1612-1 · Cited by 50
Self-citationVogiatzis, P., Chen, S., & Zhou, C. (2017) · Journal of Computing and Information Science in Engineering · doi:10.1115/1.4037738 · Cited by 49 · cited 4×
“Level-set-based framework for integrated TO and AM [261] .”
BackgroundMethodInfluentialSelf-citationSensitivity analysis in plane stress elasto-plasticity and elasto-viscoplasticity
Kleiber, M., & Kowalczyk, P. (1996) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/s0045-7825(96)01072-9 · Cited by 48 · cited 2×
“In early works, the general formulation of sensitivity analysis was introduced by, for example, these studies (Ryu et al. 1985; Tsay and Arora 1989, 1990; Vidal and Haber 1993; Vidal et al. 1991; Tortorelli 1992; Kleiber and Kowalczyk 1996; Michaleris et al. 1994).”
MethodShape optimization of a layer by layer mechanical constraint for additive manufacturing
Allaire, G., Dapogny, C., Faure, A., & Michailidis, G. (2017) · Comptes Rendus Mathématique · doi:10.1016/j.crma.2017.04.008 · Cited by 48 · cited 3×
“In a recent contribution, Allaire et al. (2017a, 2017b, 2017c) proposed a new physics-based approach for overhang-free topology optimization.”
BackgroundMethodQi, J., & Halloran, J. W. (2004) · Journal of Materials Science · doi:10.1023/b:jmsc.0000033391.65327.9d · Cited by 45 · cited 1×
“Although some special fabrication technique realized them (Qi and Halloran 2004), they needed to wait for AM technology to be sufficiently advanced for easy and precise fabrication.”
MethodGuidelines for AM part consolidation
Liu, J. (2016) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1175154 · Cited by 45 · cited 1×
“Therefore, optimizing the build direction has attracted the early attention and effective improvement of mechanical performance (Ulu et al. 2015; Umetani and Schmidt 2013; Liu 2016) has been observed.”
BackgroundSelf-citationAlgorithms for Layered Manufacturing in Image Space
Huang, P., Wang, C. C. L., & Chen, Y. (2014) · ASME Press eBooks · doi:10.1115/1.860328_ch15 · Cited by 43 · cited 2×
“results of topology optimization in implicit representation is to direct slicing implicit solids, which can avoid the robustness issue when generating the intermediate mesh representation (Huang et al. 2013b; Huang et al. 2014; Steuben et al. 2016).”
BackgroundSelf-citationDesign of energy dissipating elastoplastic structures under cyclic loads using topology optimization
Li, L., Zhang, G., & Khandelwal, K. (2017) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-017-1671-y · Cited by 43 · cited 1×
“[194] employed kinematic hardening model based on von Mises plasticity to capture the well-known Bauschinger effect under cyclic loads.”
MethodSelf-citationReinhart, G., & Teufelhart, S. (2013) · Procedia CIRP · doi:10.1016/j.procir.2013.09.031 · Cited by 42 · cited 1×
“Because of the layer-by-layer printing process, the struts are not perfect cylinders; instead, staggered boundary profile is produced and the defect is magnified with a reducing diameter (Gorguluarslan et al. 2015; Reinhart and Teufelhart 2013; Reinhart et al. 2012; Park and Rosen 2016).”
BackgroundElement deformation scaling for robust geometrically nonlinear analyses in topology optimization
van Dijk, N. P., Langelaar, M., & van Keulen, F. (2014) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-014-1145-4 · Cited by 42
A method for treating damage related criteria in optimal topology design of continuum structures
Bends�e, M. P., & D�az, A. R. (1998) · Structural and Multidisciplinary Optimization · doi:10.1007/bf01202821 · Cited by 41 · cited 3×
“Topology optimization considering damage was first introduced by Bendsøe and Diaz (1998) wherein an approximate elasticdamage model was used for designing structures with damage constraints.”
MethodStabilization of geometrically nonlinear topology optimization by the Levenberg–Marquardt method
Kawamoto, A. (2008) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-008-0236-5 · Cited by 40 · cited 3×
“…by Bruns and Tortorelli (1998), connectivity parametrization by Yoon and Kim (2005), improved nonlinear solver via Levenberg-Marquardt method by Kawamoto (2009), element deformation scaling by van Dijk et al. (2014), energy interpolation scheme by Wang et al. (2014a), additive hyperelasticity…”
MethodStability and Optimization of Structures
Ohsaki, M., & Ikeda, K. (2007) · Springer eBooks · doi:10.1007/978-0-387-68184-9 · Cited by 39 · cited 2×
“The optimization of discrete structures, like trusses or beams, considering material and geometric nonlinearities were discussed in Choi and Santos [213], Ohsaki and Arora [214], and Ohsaki and Ikeda [215].”
BackgroundCasting constraints in structural optimization via a level-set method
Allaire, G., Jouve, F., & Michailidis, G. (2013) · HAL · Cited by 39
Topology optimization of structures under variable loading using a damage superposition approach
James, K. A., & Waisman, H. (2014) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.4810 · Cited by 38 · cited 3×
“James and Waisman [199] used an elastic-damage model with constraints on damage and compliance for obtaining minimum weight designs.”
BackgroundMethodOptimal design of compliant mechanisms using functionally graded materials
Conlan-Smith, C., Bhattacharyya, A., & James, K. A. (2017) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-017-1744-y · Cited by 37 · cited 2×
“…is that producing part with functionally graded material is enabled by AM and there are different topology optimization approaches available for designing this type of structures (Xia and Wang 2008; Dunning et al. 2015; Paulino et al. 2009; Taheri and Suresh 2017; Conlan-Smith et al. 2017).”
BackgroundMethodMaterial optimization: bridging the gap between conceptual and preliminary design
Hörnlein, H. R. E. M., Kočvara, M., & Werner, R. (2001) · Aerospace Science and Technology · doi:10.1016/s1270-9638(01)01125-7 · Cited by 35 · cited 3×
“This method was utilized in the design of fiber orientation angle of carbon fiber composites (Hörnlein et al. 2001) and could now become a strong tool for AM lattice design.”
MethodInfluentialOptimum design of nonlinear structures with path dependent reponse
Tsay, J. J., & Arora, J. S. (1989) · Structural and Multidisciplinary Optimization · doi:10.1007/bf01650950 · Cited by 35 · cited 1×
“In early works, the general formulation of sensitivity analysis was introduced by, for example, these studies (Ryu et al. 1985; Tsay and Arora 1989, 1990; Vidal and Haber 1993; Vidal et al. 1991; Tortorelli 1992; Kleiber and Kowalczyk 1996; Michaleris et al. 1994).”
MethodOffset Slices for Multidirection Layered Deposition
Singh, P., & Dutta, D. (2008) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.2783217 · Cited by 35 · cited 1×
“10), where the part is printed in multiple directions (Song et al. 2015; Singh and Dutta 2008; Wu et al. 2017; Zhao et al. 2013), and material properties in each building area would be different.”
BackgroundAn integrated CNC accumulation system for automatic building-around-inserts
Zhao, X., Pan, Y., Zhou, C., Chen, Y., & Wang, C. C. L. (2013) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2013.05.009 · Cited by 35 · cited 2×
“10), where the part is printed in multiple directions (Song et al. 2015; Singh and Dutta 2008; Wu et al. 2017; Zhao et al. 2013), and material properties in each building area would be different.”
BackgroundSelf-citationFritzen, F., Xia, L., Leuschner, M., et al. (2016) · International Journal for Numerical Methods in Engineering · Cited by 35
Sustainable Design-Oriented Level Set Topology Optimization
Liu, J., & Ma, Y. (2016) · Journal of Mechanical Design · doi:10.1115/1.4035052 · Cited by 34 · cited 1×
“Then, the optimization problem can be solved similar to other multi-level set topology optimization problems (Wang and Wang 2004; Wang et al. 2015; Liu and Ma 2017; Guo et al. 2014b).”
MethodSelf-citationElasto-plastic Shape Optimization Using the Level Set Method
Maury, A., Allaire, G., & Jouve, F. (2018) · SIAM Journal on Control and Optimization · doi:10.1137/17m1128940 · Cited by 33 · cited 1×
“Recently, an elastoplastic shape optimization was explored via the level-set method by Maury et al. (2018).”
MethodViscoelastic material design with negative stiffness components using topology optimization
Prasad, J., & Díaz, A. R. (2008) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-008-0308-6 · Cited by 32 · cited 1×
“For the ones dealing with viscoelasticity and viscoplasticity, the readers are referred to the references (Prasad and Diaz 2009; Andreassen and Jensen 2014; El-Sabbagh and Baz 2014; Chen and Liu 2014; James and Waisman 2015b; Fritzen et al. 2016; Ivarsson et al. n.d.).”
BackgroundContinuous Fiber Angle Topology Optimization for Polymer Fused Filament Fabrication
Hoglund, R. M., & Smith, D. (2016) · Cited by 32
Topology Optimization for Additive Manufacturing
Clausen, A. (2016) · Technical University of Denmark, DTU Orbit (Technical University of Denmark, DTU) · Cited by 31
Wang, W., Qian, S., Lin, L., Li, B., Yin, B., Liu, L., & Liu, X. (2017) · Computers & Graphics · doi:10.1016/j.cag.2017.05.022 · Cited by 31 · cited 2×
“[61] Wang W, Qian S, Lin L, Li B, Yin B, Liu L, et al.”
BackgroundSensitivity analysis and optimization for non‐linear structural response
Schwarz, S., & Ramm, E. (2001) · Engineering Computations · doi:10.1108/02644400110387181 · Cited by 30 · cited 1×
“…and Kosaka (1997) first studied continuum topology optimization with elastoplastic materials using the classical VoigtReuss mixing rules, while an adaptive topology optimization considering von Mises plasticity based on the SIMP method was introduced by Maute et al. (1998), Schwarz and Ramm (2001).”
MethodLevel set topology optimization considering damage
Noël, L., Duysinx, P., & Maute, K. K. (2017) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-017-1724-2 · Cited by 28 · cited 2×
“[204] extended the elastic-damage model into topology optimization via the level-set method.”
MethodReinhart, G., Teufelhart, S., & Riß, F. (2012) · Physics Procedia · doi:10.1016/j.phpro.2012.10.063 · Cited by 25 · cited 1×
“Because of the layer-by-layer printing process, the struts are not perfect cylinders; instead, staggered boundary profile is produced and the defect is magnified with a reducing diameter (Gorguluarslan et al. 2015; Reinhart and Teufelhart 2013; Reinhart et al. 2012; Park and Rosen 2016).”
BackgroundSimultaneous optimisation of structural topology and material grading using level set method
Dunning, P. D., Brampton, C. J., & Kim, H. A. (2015) · Materials Science and Technology · doi:10.1179/1743284715y.0000000022 · Cited by 24 · cited 2×
“…is that producing part with functionally graded material is enabled by AM and there are different topology optimization approaches available for designing this type of structures (Xia and Wang 2008; Dunning et al. 2015; Paulino et al. 2009; Taheri and Suresh 2017; Conlan-Smith et al. 2017).”
BackgroundMethodTopology Optimization Algorithms for Additive Manufacturing
Gaynor, A. T. (2015) · Cited by 24
Self-citationComputing on rays: A parallel approach for surface mesh modeling from multi-material volumetric data
Wang, C. C. L. (2011) · Computers in Industry · doi:10.1016/j.compind.2011.02.004 · Cited by 22
Self-citationA full-space barrier method for stress-constrained discrete material design optimization
Kennedy, G. (2016) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-016-1428-z · Cited by 21 · cited 2×
“Kennedy [147] applied the DMO (Discrete Material Optimization) for multi-material interpolation and more importantly, employed the full-space barrier method to address stress constrained problems without constraint aggregation.”
MethodMultiphase layout optimization for fiber reinforced composites considering a damage model
Kato, J., & Ramm, E. (2012) · Engineering Structures · doi:10.1016/j.engstruct.2012.10.029 · Cited by 20 · cited 1×
“For a continuous damage model considering single- and multi-material, readers are referred to the studies by Kato et al. (2009), Kato and Ramm (2013), Amir (2013).”
BackgroundSelf-citationDirect extraction of surface meshes from implicitly represented heterogeneous volumes
Wang, C. C. L. (2006) · Computer-Aided Design · doi:10.1016/j.cad.2006.09.003 · Cited by 20
Self-citationAn n‐material thresholding method for improving integerness of solutions in topology optimization
Watts, S., & Tortorelli, D. A. (2016) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.5265 · Cited by 19 · cited 5×
“Watts and Tortorelli [146] proposed a new multimaterial scheme easily adaptable to “n-materials” by implementing a smooth thresholding scheme to specify the volume fraction of each material.”
BackgroundInfluentialTopology Optimization in Additive Manufacturing
Wojtuszewski, R., & Banas, A. (2017) · Vertical Flight Society Forum · doi:10.4050/f-0073-2017-12094 · Cited by 19
Driessen, A. M. (2016) · Research Repository (Delft University of Technology) · Cited by 18
Liu, J., Duke, K., & Ma, Y. (2015) · Advances in Mechanical Engineering · doi:10.1177/1687814015619767 · Cited by 17 · cited 3×
“Besides, concurrent build direction and topology optimization problem is trivial to solve, for example, through continuous orientation optimization (Bruyneel and Fleury 2002; Liu et al. 2015b).”
BackgroundMethodSelf-citationWing Design Utilizing Topology Optimization and Additive Manufacturing
Walker, D. L., Liu, D., & Jennings, A. L. (2016) · AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference (SDM) · doi:10.2514/6.2016-1246 · Cited by 10
Extended block based infill generation
Lee, T., Lee, J., & Lee, K. (2017) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-017-0572-y · Cited by 9 · cited 2×
“2014) and grid-patterned interior (Lee and Lee 2017; Lee et al. 2017) structures.”
BackgroundWing design utilizing topology optimization and additive manufacturing
Walker, D. L., Liu, D., & Jennings, A. (2017) · CRC Press eBooks · doi:10.1201/9781315119106-44 · Cited by 7 · cited 2×
“Walker et al. performed topology optimization of a wing structure to be fabricated through AM, in which a fuel tank is embedded to act as both a functional component and a load bearing structure (Walker et al. 2016).”
BackgroundMethodMuir, M. J., Querin, O. M., & TOROPOV, V. V. (2014) · AIAA Multidisciplinary Design Optimization Conference (MDO) · doi:10.2514/6.2014-0635 · Cited by 5 · cited 1×
“Optimization of the build directionwould also effectively reduce the support material consumption (Morgan et al. 2016; Muir et al. 2014).”
BackgroundExtracting Manifold and Feature-Enhanced Mesh Surfaces From Binary Volumes
Wang, C. C. L. (2008) · Journal of Computing and Information Science in Engineering · doi:10.1115/1.2960489 · Cited by 4 · cited 2×
“…is that producing part with functionally graded material is enabled by AM and there are different topology optimization approaches available for designing this type of structures (Xia and Wang 2008; Dunning et al. 2015; Paulino et al. 2009; Taheri and Suresh 2017; Conlan-Smith et al. 2017).”
MethodSelf-citationAllaire, G., Dapogny, C., Faure, A., & Michailidis, G. (2017) · HAL · Cited by 4
Cited by
Metal additive manufacturing in aerospace: A review
Blakey-Milner, B., Gradl, P., Snedden, G., Brooks, M., Pitot, J., Lopez, E., Leary, M., Berto, F., & du Plessis, A. (2021) · Materials & Design · doi:10.1016/j.matdes.2021.110008 · Cited by 2,263
Advances in 4D Printing: Materials and Applications
Kuang, X., Roach, D. J., Wu, J., Hamel, C. M., Ding, Z., Wang, T., Dunn, M. L., & Qi, H. J. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201805290 · Cited by 1,095
du Plessis, A., Yadroitsava, I., & Yadroitsev, I. (2020) · Materials & Design · doi:10.1016/j.matdes.2019.108385 · Cited by 712
Topology optimization of multi-scale structures: a review
Wu, J., Sigmund, O., & Groen, J. P. (2021) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-021-02881-8 · Cited by 688
Paolini, A., Kollmannsberger, S., & Rank, E. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.100894 · Cited by 673
“However, aspects such as support structures, minimum length-scales, material anisotropy, and multiple scales need to be considered [124].”
Background
Metadata
- Authors
- Liu, J., Gaynor, A. T., Chen, S., Kang, Z., Suresh, K., Takezawa, A., Li, L., Kato, J., Tang, J., Wang, C. C. L., Cheng, L., Liang, X., & To, A. C.
- Affiliations
- University of Pittsburgh (US)
- DEVCOM Army Research Laboratory (US)
- Stony Brook University (US)
- Dalian University of Technology (CN)
- University of Wisconsin–Madison (US)
- Hiroshima University (JP)
- University of Notre Dame (US)
- Tohoku University (JP)
- Central South University (CN)
- Delft University of Technology (NL)
- Corresponding author
- To, Albert. C.
- ORCID
- Venue
- Structural and Multidisciplinary Optimization
- Published
- 2018-05-03
- Volume
- 57
- Issue
- 6
- Pages
- 2457-2483
- ISSN
- 1615-147X (ISSN-L)
- 1615-1488
- OpenAlex
- W2800239682
- Cited by
- 870
- References
- 281
- Citations by year
- 2026: 86 · 2025: 95 · 2024: 108 · 2023: 127 · 2022: 128 · 2021: 126 · 2020: 119 · 2019: 69 · 2018: 12
- FWCI
- 73.27
- Type
- journal article
- Language
- en
- Open access
- green
- resolver.tudelft.nl
- Licence
- other-oa
- www.springer.com/tdm (tdm)
- www.springer.com/tdm (vor)
- Locations
- Structural and Multidisciplinary Optimization (publishedVersion)
- Research Explorer (The University of Manchester) (submittedVersion)
- Research Repository (Delft University of Technology) (submittedVersion)
- Data Archiving and Networked Services (DANS) (submittedVersion, other-oa)
- Funders
- National Science Foundation (CMMI-1634261, CMMI 1462270)
- National Natural Science Foundation of China (61628211, 61432003, 51535012, U1604255)
- Hunan Provincial Science and Technology Department (2016JC2001)
- Topics
- Physical Sciences › Engineering › Civil and Structural Engineering › Topology Optimization in Engineering
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Additive Manufacturing and 3D Printing Technologies
- Physical Sciences › Engineering › Mechanical Engineering › Cellular and Composite Structures
- Keywords
- topology optimization, additive manufacturing, layer-by-layer assembly, geometric complexity, design for additive manufacturing
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.