Current and future trends in topology optimization for additive manufacturing
Open accessThe DOI matches its Crossref record; 282 of the 282 references it cites were found in a registry or an index.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“It finds particular application in AM due to the manufacturing freedoms of the AM technologies, allowing optimization of shape and geometry for highly efficient designs with internal components and intricate features that are not feasible otherwise [106,107].”
From Metal additive manufacturing in aerospace: A review (2021) · cites this paper as [107]
Citations
Cites
Cellular solids structure and properties
Gibson, L. J., Ashby, M. F., et al. (1997) · Cited by 9,172
Cellular Solids: Structure and Properties
Gibson, L. J., & Ashby, M. F. (1997) · Cambridge University Press eBooks · doi:10.1017/cbo9781139878326 · Cited by 5,512
Porous scaffold design for tissue engineering
Hollister, S. J. (2005) · Nature Materials · doi:10.1038/nmat1421 · Cited by 3,969 · cited 3×
“Through early tries of AM fabrication [113], Hollister [114] performed the first utilization of the topology-optimized lattice in real-world application by AM technology.”
MethodA level set method for structural topology optimization
Wang, M. Y., Wang, X., & Guo, D. (2003) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/s0045-7825(02)00559-5 · Cited by 3,232 · cited 2×
“To address these issues, significant research has been carried out on manufacturability-oriented topology optimization, under both the density-based (Bendsøe and Sigmund 2004) and level set (Wang et al. 2003; Allaire et al. 2004) frameworks.”
MethodTopology optimization approaches: A comparative review
Sigmund, O., & Maute, K. (2013) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-013-0978-6 · Cited by 2,890
Material interpolation schemes in topology optimization
Bendsøe, M. P., & Sigmund, O. (1999) · Archive of Applied Mechanics (Ingenieur Archiv) · doi:10.1007/s004190050248 · Cited by 2,827 · cited 10×
“Through early tries of AM fabrication (Sigmund et al. 1998), Hollister (2005) performed the first utilization of the topology-optimized lattice in the real-world application by AM technology.”
MethodInfluentialStructural optimization using sensitivity analysis and a level-set method
Allaire, G., Jouve, F., & Toader, A.-M. (2004) · Journal of Computational Physics · doi:10.1016/j.jcp.2003.09.032 · Cited by 2,759 · cited 2×
“To address these issues, significant research has been carried out on manufacturability-oriented topology optimization, under both the density-based (Bendsøe and Sigmund 2004) and level set (Wang et al. 2003; Allaire et al. 2004) frameworks.”
MethodThe status, challenges, and future of additive manufacturing in engineering
Gao, W., Zhang, Y., Ramanujan, D., Ramani, K., Chen, Y., Williams, C. B., Wang, C. C. L., Shin, Y. C., Zhang, S., & Zavattieri, P. D. (2015) · Computer-Aided Design · doi:10.1016/j.cad.2015.04.001 · Cited by 2,631
Self-citationAnisotropic material properties of fused deposition modeling ABS
Ahn, S., Montero, M., Odell, D., Roundy, S., & Wright, P. K. (2002) · Rapid Prototyping Journal · doi:10.1108/13552540210441166 · Cited by 2,382 · cited 3×
“, topology optimization with material anisotropy (Ahn et al. 2002; Zhang et al. 2017a), self-support design (Mirzendehdel and Suresh 2016; Gaynor and Guest 2016; Guo et al.”
BackgroundMethodWang, X., Xu, S., Zhou, S., Xu, W., Leary, M., Choong, P., Qian, M., Brandt, M., & Xie, Y. M. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.01.012 · Cited by 2,121 · cited 5×
“Note that topology optimization for bio-mechanical AM is not covered in this paper since a related literature survey was recently published (Wang et al. 2016a).”
BackgroundMethodInfluentialTriangle: Engineering a 2D quality mesh generator and Delaunay triangulator
Shewchuk, J. R. (1996) · Lecture Notes in Computer Science · doi:10.1007/bfb0014497 · Cited by 2,115 · cited 1×
“The isosurface, formed by the boundaries of the design, can be transformed to a triangle mesh using Delaunay triangulation (Shewchuk 1996).”
MethodOn projection methods, convergence and robust formulations in topology optimization
Wang, F., Lazarov, B. S., & Sigmund, O. (2011) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-010-0602-y · Cited by 1,859
Bendsøe, M. P., & Sigmund, O. (2004) · Springer eBooks · doi:10.1007/978-3-662-05086-6 · Cited by 1,727
On the Design of Compliant Mechanisms Using Topology Optimization*
Sigmund, O. (1997) · Mechanics of Structures and Machines · doi:10.1080/08905459708945415 · Cited by 1,384 · cited 4×
“Gaynor et al. (2014) implemented both this scheme and a new alternative multi-material scheme in conjunction with a robust min-max topology optimization scheme to design multi-material compliant mechanisms (Sigmund 1997).”
MethodInfluentialGuest, J. K., Prévost, J. H., & Belytschko, T. (2004) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.1064 · Cited by 1,300 · cited 2×
“Targeting conventional machining and injection molding, the length scale issue (Allaire et al. 2016; Guest 2009; Guest et al. 2004; Guo et al. 2014a; Poulsen 2003; Zhang et al. 2014) no-undercut restriction (Xia et al.”
BackgroundGuo, X., Zhang, W., & Zhong, W. (2014) · Journal of Applied Mechanics · doi:10.1115/1.4027609 · Cited by 1,243 · cited 4×
“Then, the optimization problem can be solved similar to other multi-level set topology optimization problems (Wang and Wang 2004; Wang et al. 2015; Liu and Ma 2017; Guo et al. 2014b).”
InfluentialA critical review of established methods of structural topology optimization
Rozvany, G. I. N. (2009) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-007-0217-0 · Cited by 1,078 · cited 1×
“Topology optimization, as a structural design method, has experienced rapid development in the past few decades, and dedicated reviews can be found in (Rozvany 2009; Sigmund andMaute 2013; van Dijk et al. 2013).”
MethodLevel-set methods for structural topology optimization: a review
van Dijk, N. P., Maute, K., Langelaar, M., & van Keulen, F. (2013) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-013-0912-y · Cited by 1,008 · cited 2×
“Topology optimization, as a structural design method, has experienced rapid development in the past few decades, and dedicated reviews can be found in (Rozvany 2009; Sigmund andMaute 2013; van Dijk et al. 2013).”
BackgroundMethodTopology Optimization in Aircraft and Aerospace Structures Design
Zhu, J.-H., Zhang, W.-H., & Xia, L. (2016) · Archives of Computational Methods in Engineering · doi:10.1007/s11831-015-9151-2 · Cited by 980 · cited 1×
“These components may fulfill multiple functionalities, such as load-carrying, electronic circuiting, actuation and structural health monitoring (Zhu et al. 2016).”
BackgroundGe, Q., Dunn, C. K., Qi, H. J., & Dunn, M. L. (2014) · Smart Materials and Structures · doi:10.1088/0964-1726/23/9/094007 · Cited by 726 · cited 4×
“Ge et al. used 3D printers to precisely place shape memory polymers into an elastomeric matrix as intelligent active hinges to enable 4D origami folding patterns, and pointed out a future direction of the folding design based on topology optimization (Ge et al. 2014).”
BackgroundInfluentialDesign and fabrication of compliant micromechanisms and structures with negative Poisson's ratio
Larsen, U. D., Signund, O., & Bouwsta, S. (1997) · Journal of Microelectromechanical Systems · doi:10.1109/84.585787 · Cited by 658
An efficient 3D topology optimization code written in Matlab
Liu, K., & Tovar, A. (2014) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-014-1107-x · Cited by 649 · cited 2×
“Open-source codes are available for generating STL files based on topology optimization results [260,260,261,264].”
MethodMechanical characterization of parts fabricated using fused deposition modeling
Bellini, A., & Güçeri, S. (2003) · Rapid Prototyping Journal · doi:10.1108/13552540310489631 · Cited by 628 · cited 2×
“AM-induced material anisotropy is widely known (Ahn et al. 2002; Bellini and Güçeri 2003).”
BackgroundMotion of Multiple Junctions: A Level Set Approach
Merriman, B., Bence, J. K., & Osher, S. (1994) · Journal of Computational Physics · doi:10.1006/jcph.1994.1105 · Cited by 581 · cited 2×
“The RLSM was first introduced by (Merriman et al. 1994; Zhang et al. 2008) for modeling multiphase flow and was later applied to multi-material topology optimization of smart energy harvesters (Chen et al. 2010) and metamaterials (Vogiatzis et al. 2017a).”
MethodInfill Optimization for Additive Manufacturing—Approaching Bone-Like Porous Structures
Wu, J., Aage, N., Westermann, R., & Sigmund, O. (2017) · IEEE Transactions on Visualization and Computer Graphics · doi:10.1109/tvcg.2017.2655523 · Cited by 572 · cited 4×
“The numerical designs gained from (Wu et al. 2018) is a mix of both walls and trusses, where the former is preferred from the viewpoint of solid mechanics but the latter has better functionality (e.”
BackgroundMethodInfluentialStiffness design of geometrically nonlinear structures using topology optimization
Buhl, T., Pedersen, C. B. W., & Sigmund, O. (2000) · Structural and Multidisciplinary Optimization · doi:10.1007/s001580050089 · Cited by 570 · cited 1×
“The important ones include internal nodal forces exclusion scheme by Buhl et al. (2000) and Pedersen et al. (2001), element removal and reintroduction scheme by Bruns and Tortorelli (1998), connectivity parametrization by Yoon and Kim (2005), improved nonlinear solver via Levenberg-Marquardt method…”
MethodTopology Optimized Architectures with Programmable Poisson's Ratio over Large Deformations
Clausen, A., Wang, F., Jensen, J. S., Sigmund, O., & Lewis, J. A. (2015) · Advanced Materials · doi:10.1002/adma.201502485 · Cited by 551 · cited 2×
“realized control of Poisson’s ratio even in large deformation region considering geometrical nonlinearity (Clausen et al. 2015).”
BackgroundHierarchical optimization of material and structure
Rodrigues, H. C., Guedes, J. M., & Bendsøe, M. P. (2002) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-002-0209-z · Cited by 518 · cited 2×
“[94] Rodrigues H, Guedes JM, Bendsoe MP.”
BackgroundWang, M. Y., & Wang, X. (2003) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2003.10.008 · Cited by 488 · cited 6×
“11 Multi-material topology optimization through the “color” level set method (left) (Wang and Wang 2004) and the reconciled level set method (right) (Vogiatzis et al.”
BackgroundMethodInfluentialGaynor, A. T., & Guest, J. K. (2016) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-016-1551-x · Cited by 476 · cited 7×
“Gaynor and Guest (2016) realized the overhang-free design through an additional layer of design variable projection; see Fig.”
BackgroundMethodInfluentialSelf-citationTopology synthesis of large‐displacement compliant mechanisms
Pedersen, C., Buhl, T., & Sigmund, O. (2001) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.148 · Cited by 470 · cited 8×
“Later on, Bogomolny and Amir (2012) incorporated topology optimization with the Drucker-Prager plastic model for reinforced concrete design.”
MethodInfluentialBridging topology optimization and additive manufacturing
Zegard, T., & Paulino, G. H. (2016) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-015-1274-4 · Cited by 457 · cited 3×
“16) (Zegard and Paulino 2015; Vogiatzis et al. 2017b; Liu and Tovar 2014).”
BackgroundAdvanced lattice support structures for metal additive manufacturing
Hussein, A., Hao, L., Yan, C., Everson, R., & Young, P. (2013) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2013.01.020 · Cited by 454 · cited 2×
“…(Huang et al. 2009), tree-like structure (Vanek et al. 2014; Gan and Wong 2016), bridge-like scaffold (Dumas et al. 2014), and repetitive cellular structures (Strano et al. 2013; Hussein et al. 2013), which form lightweight support subjected to the well-defined part geometry and build direction.”
BackgroundManufacturing tolerant topology optimization
Sigmund, O. (2009) · Acta Mechanica Sinica · doi:10.1007/s10409-009-0240-z · Cited by 428 · cited 10×
“Through early tries of AM fabrication (Sigmund et al. 1998), Hollister (2005) performed the first utilization of the topology-optimized lattice in the real-world application by AM technology.”
MethodInfluentialMicrostructures to control elasticity in 3D printing
Schumacher, C., Bickel, B., Rys, J., Marschner, S., Daraio, C., & Gross, M. (2015) · ACM Transactions on Graphics · doi:10.1145/2766926 · Cited by 414 · cited 3×
“[102] Schumacher C, Bickel B, Rys J, Marschner S, Daraio C, Gross M.”
BackgroundMethodLeary, M., Merli, L., Torti, F., Mazur, M., & Brandt, M. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.06.015 · Cited by 406 · cited 3×
“[41] Leary M, Merli L, Torti F, Mazur M, Brandt M.”
BackgroundInfluentialTopology optimization of 3D self-supporting structures for additive manufacturing
Langelaar, M. (2016) · Additive Manufacturing · doi:10.1016/j.addma.2016.06.010 · Cited by 405 · cited 4×
“Langelaar (2017, 2016) proposed another density filter which achieves a similar overhang-free effect compared to (Gaynor and Guest 2016).”
BackgroundMethodInfluentialAn additive manufacturing filter for topology optimization of print-ready designs
Langelaar, M. (2016) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-016-1522-2 · Cited by 404 · cited 6×
“commercial software: Gaynor and Guest [22] into Altair Optistruct and Langelaar [42,43] into Simulia’s”
BackgroundMethodInfluentialJoe Lopes, A., MacDonald, E., & Wicker, R. B. (2012) · Rapid Prototyping Journal · doi:10.1108/13552541211212113 · Cited by 399 · cited 1×
“Multifunctional structural systems can be implemented by integrating functional components into the host structures using stereolithography, direct print and other AM technologies (Lopes et al. 2012).”
BackgroundA new approach to the design and optimisation of support structures in additive manufacturing
Strano, G., Hao, L., Everson, R. M., & Evans, K. E. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4403-x · Cited by 389 · cited 3×
“structure [28], tree-like structure [29,30], bridge-like scaffold [31], and repetitive cellular structures [32,33], which form lightweight support subjected to the well-defined part geometry and build direction.”
BackgroundOptimum structure with homogeneous optimum truss-like material
Liu, L., Yan, J., & Cheng, G. (2008) · Computers & Structures · doi:10.1016/j.compstruc.2007.04.030 · Cited by 383 · cited 1×
“Both homogeneous (Wang et al. 2016b; Huang et al. 2013a; Niu et al. 2009; Guo et al. 2015; Deng et al. 2013; Fujii et al. 2001; Zhang and Sun 2006; Liu et al. 2008) and heterogeneous (Coelho et al. 2008, 2011; Rodrigues et al. 2002; Xia and Breitkopf 2014, 2015; Wang et al. 2017c; Sivapuram et al.…”
BackgroundMichaleris, P., Tortorelli, D. A., & Vidal, C. A. (1994) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.1620371408 · Cited by 377 · cited 4×
“introduced an approach assuming anisotropic elastoplasticity based on the adjoint method [184].”
MethodInfluentialMultiphase composites with extremal bulk modulus
Gibiansky, L. V., & Sigmund, O. (2000) · Journal of the Mechanics and Physics of Solids · doi:10.1016/s0022-5096(99)00043-5 · Cited by 369 · cited 2×
“Sigmund and his colleagues (Sigmund 1997; Gibiansky and Sigmund 2000) applied multi-material topology optimization to design extreme material properties, and Bendsoe and Sigmund (Bendsøe and Sigmund 1999) summarized the rules of multi-material interpolation under the density-based framework.”
MethodDing, D., Pan, Z. S., Cuiuri, D., & Li, H. (2015) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2015.01.003 · Cited by 363 · cited 1×
“Various tool path patterns have been applied to AM (Ding et al. 2015), including the zig-zag, contour-offset, hybrid, and medial axis-based, and each alternative has its unique characteristic from the perspective of manufacturing efficiency and quality.”
MethodComposites with extremal thermal expansion coefficients
Sigmund, O., & Torquato, S. (1996) · Applied Physics Letters · doi:10.1063/1.117961 · Cited by 358 · cited 2×
“Their main scope realizes extraordinary effective physical properties through lattice shapes such as the one close to theoretical limits [107,108], negative Poison’s ratio in elastic problem [109], negative thermal expansion [110], and acoustic negative bulk modulus [111].”
BackgroundA survey of manufacturing oriented topology optimization methods
Liu, J., & Ma, Y. (2016) · Advances in Engineering Software · doi:10.1016/j.advengsoft.2016.07.017 · Cited by 356 · cited 5×
“Related literature surveys can be found in (Liu and Ma 2016; Lazarov et al. 2016).”
BackgroundInfluentialSelf-citationTopology optimization based on moving deformable components: A new computational frameworkPreprint
Guo, X., Zhang, W., & Zhong, W. (2014) · arXiv (Cornell University) · doi:10.48550/arxiv.1404.4820 · Cited by 349 · cited 4×
“Then, the optimization problem can be solved similar to other multi-level set topology optimization problems (Wang and Wang 2004; Wang et al. 2015; Liu and Ma 2017; Guo et al. 2014b).”
InfluentialA new class of extremal composites
Sigmund, O. (2000) · Journal of the Mechanics and Physics of Solids · doi:10.1016/s0022-5096(99)00034-4 · Cited by 347 · cited 3×
“Their main scope realizes extraordinary effective physical properties through lattice shapes such as the one close to theoretical limits [107,108], negative Poison’s ratio in elastic problem [109], negative thermal expansion [110], and acoustic negative bulk modulus [111].”
BackgroundMethodTopology Optimization for Additive Manufacturing
Brackett, D., Ashcroft, I., & Hague, R. (2011) · doi:10.26153/tsw/15300 · Cited by 347
Design of manufacturable 3D extremal elastic microstructure
Andreassen, E., Lazarov, B. S., & Sigmund, O. (2014) · Mechanics of Materials · doi:10.1016/j.mechmat.2013.09.018 · Cited by 340 · cited 3×
“Andersen also realized a negative Poisson’s ratio whose value reached −0.5 by Nylon selective laser melting approach (Andreassen et al. 2014).”
BackgroundMethodInfluentialXia, L., & Breitkopf, P. (2014) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2014.05.022 · Cited by 339 · cited 1×
“…Guo et al. 2015; Deng et al. 2013; Fujii et al. 2001; Zhang and Sun 2006; Liu et al. 2008) and heterogeneous (Coelho et al. 2008, 2011; Rodrigues et al. 2002; Xia and Breitkopf 2014, 2015; Wang et al. 2017c; Sivapuram et al. 2016) lattice infill have been studied through the two-scale optimization.”
BackgroundSimultaneous material and structural optimization by multiscale topology optimization
Sivapuram, R., Dunning, P. D., & Kim, H. A. (2016) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-016-1519-x · Cited by 322 · cited 1×
“…Guo et al. 2015; Deng et al. 2013; Fujii et al. 2001; Zhang and Sun 2006; Liu et al. 2008) and heterogeneous (Coelho et al. 2008, 2011; Rodrigues et al. 2002; Xia and Breitkopf 2014, 2015; Wang et al. 2017c; Sivapuram et al. 2016) lattice infill have been studied through the two-scale optimization.”
BackgroundLength scale and manufacturability in density-based topology optimization
Lazarov, B. S., Wang, F., & Sigmund, O. (2016) · Archive of Applied Mechanics · doi:10.1007/s00419-015-1106-4 · Cited by 319 · cited 4×
“The key issue here is the many violations of the machinability-related design rules (Liu and Ma 2016; Lazarov et al. 2016), e.g., interior holes are difficult to access but are often produced by topology optimization.”
BackgroundInfluentialSupport structure constrained topology optimization for additive manufacturing
Mirzendehdel, A. M., & Suresh, K. (2016) · Computer-Aided Design · doi:10.1016/j.cad.2016.08.006 · Cited by 318 · cited 9×
“Another point worth mentioning is that producing part with functionally graded material is enabled by AM and there are different topology optimization approaches available for designing this type of structures (Xia and Wang 2008; Dunning et al. 2015; Paulino et al. 2009; Taheri and Suresh 2017; Conlan-Smith et al. 201…”
MethodInfluentialSelf-citationEvolution of 3D printed soft actuators
Zolfagharian, A., Kouzani, A. Z., Khoo, S. Y., Moghadam, A. A. A., Gibson, I., & Kaynak, A. (2016) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2016.09.028 · Cited by 314 · cited 3×
“Currently, developing soft actuators and sensors by means of 3D printing of viscoelastic polymers has also become an interesting topic [234].”
BackgroundInfluentialDede, E. M., Joshi, S. N., & Zhou, F. (2015) · Journal of Mechanical Design · doi:10.1115/1.4030989 · Cited by 312 · cited 1×
“In summary, we have seen significant research achievements in the past few years and also the numerous successful printings of the topological designs (Cheng et al. 2017; Vogiatzis et al. 2017a; Gaynor et al. 2014; Maute et al. 2015; Meisel and Williams 2015; Dede et al. 2015; Smith et al. 2016).”
BackgroundSelf-supporting structure design in additive manufacturing through explicit topology optimization
Guo, X., Zhou, J., Zhang, W., Du, Z., Liu, C., & Liu, Y. (2017) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2017.05.003 · Cited by 309 · cited 3×
“2017a), self-support design (Mirzendehdel and Suresh 2016; Gaynor and Guest 2016; Guo et al. 2017; Allaire et al. 2017a), and porous infill design (Wu et al.”
BackgroundMethodA multi-material level set-based topology and shape optimization method
Wang, Y., Luo, Z., Kang, Z., & Zhang, N. (2014) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2014.11.002 · Cited by 304 · cited 5×
“Even though multi-material topology optimization (Wang and Wang 2004; Wang et al. 2015) can readily solve this problem, how to customize the algorithm to facilitate the AM process planning remains a tough problem.”
BackgroundMethodInfluentialSelf-citationBuild-to-last: strength to weight 3D printed objects
Lu, L., Sharf, A., Zhao, H., Wei, Y., Fan, Q., Chen, X., Savoye, Y., Tu, C., Cohen-Or, D., & Chen, B. (2014) · ACM Transactions on Graphics · doi:10.1145/2601097.2601168 · Cited by 290 · cited 5×
“On the other hand, the self-support constraints were not considered [61] and support in dissolvable materials has to be built [66], which makes this approach only suitable for polymer printing.”
BackgroundInfluentialWang, F., Lazarov, B. S., Sigmund, O., & Jensen, J. S. (2014) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2014.03.021 · Cited by 288 · cited 4×
“[171], additive hyperelasticity technique by Luo et al.”
BackgroundMethodInfluentialAdaptive topology optimization of elastoplastic structures
Maute, K. K., Schwarz, S., & Ramm, E. (1998) · Structural and Multidisciplinary Optimization · doi:10.1007/bf01278493 · Cited by 282 · cited 1×
“…and Kosaka (1997) first studied continuum topology optimization with elastoplastic materials using the classical VoigtReuss mixing rules, while an adaptive topology optimization considering von Mises plasticity based on the SIMP method was introduced by Maute et al. (1998), Schwarz and Ramm (2001).”
MethodCost-effective printing of 3D objects with skin-frame structures
Wang, W., Wang, T. Y., Yang, Z., Liu, L., Tong, X., Tong, W., Deng, J., Chen, F., & Liu, X. (2013) · ACM Transactions on Graphics · doi:10.1145/2508363.2508382 · Cited by 282 · cited 4×
“11 (a) Truss/beam infill [62] (b) Variable-density periodic lattice infill [20]”
BackgroundMethodInfluentialExplicit three dimensional topology optimization via Moving Morphable Void (MMV) approach
Zhang, W., Chen, J., Zhu, X., Zhou, J., Xue, D., Lei, X., & Guo, X. (2017) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2017.05.002 · Cited by 282 · cited 1×
“[173] Zhang W, Chen J, Zhu X, Zhou J, Xue D, Lei X, et al.”
BackgroundQian, X. (2017) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.5461 · Cited by 278 · cited 2×
“Recently, Qian [45] used the density gradients to check the undercuts and overhangs and applied Heaviside projection to form a global constraint.”
MethodVogiatzis, P., Chen, S., Wang, X., Li, T., & Wang, L. (2016) · Computer-Aided Design · doi:10.1016/j.cad.2016.09.009 · Cited by 275 · cited 6×
“Generally after topology optimization, either the density (Zegard and Paulino 2015) or level set field (Vogiatzis et al. 2017b) needs to be post-processed into a printer-compatible geometric file, e.g., the STL.”
BackgroundMethodInfluentialSelf-citationGaynor, A. T., Meisel, N. A., Williams, C. B., & Guest, J. K. (2014) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4028439 · Cited by 271 · cited 6×
“Gaynor et al. (2014) implemented both this scheme and a new alternative multi-material scheme in conjunction with a robust min-max topology optimization scheme to design multi-material compliant mechanisms (Sigmund 1997).”
BackgroundMethodInfluentialSelf-citationImposing maximum length scale in topology optimization
Guest, J. K. (2008) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-008-0250-7 · Cited by 268 · cited 2×
“Targeting conventional machining and injection molding, the length scale issue (Allaire et al. 2016; Guest 2009; Guest et al. 2004; Guo et al. 2014a; Poulsen 2003; Zhang et al. 2014) no-undercut restriction (Xia et al.”
BackgroundClever Support: Efficient Support Structure Generation for Digital Fabrication
Vanek, J., Galicia, J. A. G., & Benes, B. (2014) · Computer Graphics Forum · doi:10.1111/cgf.12437 · Cited by 268
Level set based robust shape and topology optimization under random field uncertainties
Chen, S., Chen, W., & Lee, S. (2009) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-009-0449-2 · Cited by 266
Self-citationCoelho, P. G., Fernandes, P. R., Guedes, J. M., & Rodrigues, H. C. (2007) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-007-0141-3 · Cited by 260 · cited 4×
“[92] Coelho PG, Fernandes PR, Guedes JM, Rodrigues HC.”
BackgroundInfluentialOn the design of 1–3 piezocomposites using topology optimization
Sigmund, O., Torquato, S., & Aksay, I. A. (1998) · Journal of Materials Research · doi:10.1557/jmr.1998.0145 · Cited by 252 · cited 2×
“Through early tries of AM fabrication [113], Hollister [114] performed the first utilization of the topology-optimized lattice in real-world application by AM technology.”
MethodBendsøe, M. P., Guedes, J. M., Haber, R. B., Pedersen, P., & Taylor, J. E. (1994) · Journal of Applied Mechanics · doi:10.1115/1.2901581 · Cited by 251
Zhang, P., Toman, J., Yu, Y., Biyikli, E., Kırca, M., Chmielus, M., & To, A. C. (2014) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4028724 · Cited by 248 · cited 6×
“The diameters and nodal positions of the struts can be effectively optimized with discrete topology optimization methods, such as the ground structure optimization (Zhang et al. 2015b; Wang et al. 2013).”
BackgroundMethodInfluentialSelf-citationExploiting Additive Manufacturing Infill in Topology Optimization for Improved Buckling Load
Clausen, A., Aage, N., & Sigmund, O. (2016) · Engineering · doi:10.1016/j.eng.2016.02.006 · Cited by 243 · cited 1×
“…lattice structure optimization (Wang et al. 2016a; Zhang et al. 2015c; Arabnejad Khanoki and Pasini 2012; Cheng et al. 2017; Liu et al. 2015a; Clausen et al. 2016), i.e., lattice units in prescribed base shape are selected to periodically fill the part interior where an optimal lattice…”
BackgroundLuo, Y., Kang, Z., Luo, Z., & Li, A. (2008) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-008-0329-1 · Cited by 238 · cited 1×
“…samples are not available to permit a precise probability model of the uncertain inputs, non-probabilistic convex models (Kang and Zhang 2016) providing smooth bound descriptions of the uncertainties become attractive for acquiring reliable topology optimization solutions (Luo et al. 2009).”
BackgroundSelf-citationScale‐related topology optimization of cellular materials and structures
Zhang, W., & Sun, S. (2006) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.1743 · Cited by 237 · cited 2×
“Both homogeneous (Wang et al. 2016b; Huang et al. 2013a; Niu et al. 2009; Guo et al. 2015; Deng et al. 2013; Fujii et al. 2001; Zhang and Sun 2006; Liu et al. 2008) and heterogeneous (Coelho et al. 2008, 2011; Rodrigues et al. 2002; Xia and Breitkopf 2014, 2015; Wang et al. 2017c; Sivapuram et al.…”
BackgroundA new scheme for imposing a minimum length scale in topology optimization
Poulsen, T. A. (2003) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.694 · Cited by 237 · cited 2×
“Targeting conventional machining and injection molding, the length scale issue (Allaire et al. 2016; Guest 2009; Guest et al. 2004; Guo et al. 2014a; Poulsen 2003; Zhang et al. 2014) no-undercut restriction (Xia et al.”
BackgroundDeng, J., Yan, J., & Cheng, G. (2012) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-012-0849-6 · Cited by 233 · cited 2×
“Both homogeneous (Wang et al. 2016b; Huang et al. 2013a; Niu et al. 2009; Guo et al. 2015; Deng et al. 2013; Fujii et al. 2001; Zhang and Sun 2006; Liu et al. 2008) and heterogeneous (Coelho et al. 2008, 2011; Rodrigues et al. 2002; Xia and Breitkopf 2014, 2015; Wang et al. 2017c; Sivapuram et al.…”
BackgroundCheng, L., Zhang, P., Biyikli, E., Bai, J., Robbins, J., & To, A. (2017) · Rapid Prototyping Journal · doi:10.1108/rpj-04-2016-0069 · Cited by 229 · cited 4×
“In summary, we have seen significant research achievements in the past few years and also the numerous successful printings of the topological designs (Cheng et al. 2017; Vogiatzis et al. 2017a; Gaynor et al. 2014; Maute et al. 2015; Meisel and Williams 2015; Dede et al. 2015; Smith et al. 2016).”
BackgroundMethodInfluentialSelf-citationStructural optimization under uncertain loads and nodal locations
Guest, J. K., & Igusa, T. (2008) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2008.04.009 · Cited by 228 · cited 2×
“In Guest and Igusa (2008), it was demonstrated that if no uncertainty in the geometric accuracy of manufacturing (construction) is accounted for in the optimization, the solution to a multimember, pin-connected truss in compression is a straight truss with “pivot joints” along the length.”
BackgroundA variant of the level set method and applications to image segmentation
Lie, J., Lysaker, M., & Tai, X. (2006) · Mathematics of Computation · doi:10.1090/s0025-5718-06-01835-7 · Cited by 228 · cited 2×
“An alternative method is the piecewise constant level set method (Lie et al. 2006; Wei andWang 2009), in which different values of the level set functions split the design domain into different areas.”
MethodOptimum structure with homogeneous optimum cellular material for maximum fundamental frequency
Niu, B., Yan, J., & Cheng, G. (2008) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-008-0334-4 · Cited by 227 · cited 2×
“Both homogeneous (Wang et al. 2016b; Huang et al. 2013a; Niu et al. 2009; Guo et al. 2015; Deng et al. 2013; Fujii et al. 2001; Zhang and Sun 2006; Liu et al. 2008) and heterogeneous (Coelho et al. 2008, 2011; Rodrigues et al. 2002; Xia and Breitkopf 2014, 2015; Wang et al. 2017c; Sivapuram et al.…”
BackgroundStructural Topology Optimization Through Explicit Boundary Evolution
Zhang, W., Yang, W., Zhou, J., Li, D., & Guo, X. (2017) · Journal of Applied Mechanics · doi:10.1115/1.4034972 · Cited by 227 · cited 2×
“[55] Zhang W, Yang W, Zhou J, Li D, Guo X.”
BackgroundMethodAsadpoure, A., Tootkaboni, M., & Guest, J. K. (2010) · Computers & Structures · doi:10.1016/j.compstruc.2010.11.004 · Cited by 224 · cited 3×
“[235] Asadpoure A, Tootkaboni M, Guest JK.”
MethodInfluentialKang, Z., & Luo, Y. (2009) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2009.06.001 · Cited by 220 · cited 4×
“The important ones include internal nodal forces exclusion scheme by Buhl et al. (2000) and Pedersen et al. (2001), element removal and reintroduction scheme by Bruns and Tortorelli (1998), connectivity parametrization by Yoon and Kim (2005), improved nonlinear solver via Levenberg-Marquardt method by Kawamoto (2009),…”
BackgroundInfluentialSelf-citationDesign of Multimaterial Compliant Mechanisms Using Level-Set Methods
Wang, M. Y., Chen, S., Wang, X., & Mei, Y. (2005) · Journal of Mechanical Design · doi:10.1115/1.1909206 · Cited by 215 · cited 3×
“Under the level set framework, (Wang and Wang 2004; Wang et al. 2005b) proposed the ‘color’ level set method (CLSM) for multi-material topology optimization, which was later widely followed.”
MethodSelf-citationPractical support structures for selective laser melting
Gan, M., & Chee How, W. O. N. G. (2016) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2016.08.006 · Cited by 214 · cited 2×
“2009), tree-like structure (Vanek et al. 2014; Gan and Wong 2016), bridge-like scaffold (Dumas et al.”
MethodStructural optimization under overhang constraints imposed by additive manufacturing technologies
Allaire, G., Dapogny, C., Estevez, R., Faure, A., & Michailidis, G. (2017) · Journal of Computational Physics · doi:10.1016/j.jcp.2017.09.041 · Cited by 212 · cited 3×
“In a recent contribution, Allaire et al. (2017a, 2017b, 2017c) proposed a new physics-based approach for overhang-free topology optimization.”
BackgroundMethodDesign of Auxetic Structures via Mathematical Optimization
Schwerdtfeger, J., Wein, F., Leugering, G. R., Singer, R. F., Körner, C., Stingl, M., & Schury, F. (2011) · Advanced Materials · doi:10.1002/adma.201004090 · Cited by 205 · cited 3×
“[115] Schwerdtfeger J, Wein F, Leugering G, Singer RF, Körner C, Stingl M, et al.”
BackgroundMethodConcurrent design with connectable graded microstructures
Wang, Y., Chen, F., & Wang, M. Y. (2017) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2016.12.007 · Cited by 204 · cited 6×
“On the other hand, the self-support constraints were not considered (Wang et al. 2017a) and support in dissolvable materials has to be built (Lu et al. 2014), which makes this approach only suitable for polymer printing.”
BackgroundMethodInfluentialSelf-supporting rhombic infill structures for additive manufacturing
Wu, J., Wang, C. C. L., Zhang, X., & Westermann, R. (2016) · Computer-Aided Design · doi:10.1016/j.cad.2016.07.006 · Cited by 201 · cited 5×
“[74] Wu J, Wang CCL, Zhang X, Westermann R.”
BackgroundMethodInfluentialSelf-citationLin, C., Wirtz, T., LaMarca, F., & Hollister, S. J. (2007) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.31231 · Cited by 198 · cited 2×
“Specifically, severe performance reduction, by more than 50%, of AM lattice from topology optimization simulation results has been observed (Lin et al. 2007; Xiao et al. 2013).”
BackgroundPiecewise constant level set method for structural topology optimization
Wei, P., & Wang, M. Y. (2008) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.2478 · Cited by 196 · cited 1×
“An alternative method is the piecewise constant level set method [149,150], in which different values of the level set functions split the design domain into different areas.”
MethodThickness control in structural optimization via a level set method
Allaire, G., Jouve, F., & Michailidis, G. (2016) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-016-1453-y · Cited by 195 · cited 2×
“Targeting conventional machining and injection molding, the length scale issue (Allaire et al. 2016; Guest 2009; Guest et al. 2004; Guo et al. 2014a; Poulsen 2003; Zhang et al. 2014) no-undercut restriction (Xia et al.”
BackgroundDesign of graded two-phase microstructures for tailored elasticity gradients
Zhou, S., & Li, Q. (2008) · Journal of Materials Science · doi:10.1007/s10853-008-2722-y · Cited by 194 · cited 2×
“Attempts have been made to address these issues, for example, through parallel computing (Coelho et al. 2008, 2011; Wang et al. 2017c) for the former and imposing material variation constraints (Wang et al. 2017c; Zhou and Li 2008) for the latter.”
BackgroundArabnejad Khanoki, S., & Pasini, D. (2012) · Journal of Biomechanical Engineering · doi:10.1115/1.4006115 · Cited by 192
Topology optimization of microstructures of cellular materials and composites for macrostructures
Huang, X., Zhou, S., Xie, Y. M., & Li, Q. (2012) · Computational Materials Science · doi:10.1016/j.commatsci.2012.09.018 · Cited by 190 · cited 3×
“Both homogeneous (Wang et al. 2016b; Huang et al. 2013a; Niu et al. 2009; Guo et al. 2015; Deng et al. 2013; Fujii et al. 2001; Zhang and Sun 2006; Liu et al. 2008) and heterogeneous (Coelho et al. 2008, 2011; Rodrigues et al. 2002; Xia and Breitkopf 2014, 2015; Wang et al. 2017c; Sivapuram et al.…”
BackgroundExplicit feature control in structural topology optimization via level set method
Guo, X., Zhang, W., & Zhong, W. (2014) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2014.01.010 · Cited by 189 · cited 3×
“Then, the optimization problem can be solved similar to other multi-level set topology optimization problems (Wang and Wang 2004; Wang et al. 2015; Liu and Ma 2017; Guo et al. 2014b).”
BackgroundMethodXia, L., & Breitkopf, P. (2015) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2014.12.018 · Cited by 185 · cited 1×
“…Guo et al. 2015; Deng et al. 2013; Fujii et al. 2001; Zhang and Sun 2006; Liu et al. 2008) and heterogeneous (Coelho et al. 2008, 2011; Rodrigues et al. 2002; Xia and Breitkopf 2014, 2015; Wang et al. 2017c; Sivapuram et al. 2016) lattice infill have been studied through the two-scale optimization.”
BackgroundNonlinear structural design sensivitity analysis for path dependent problems. Part 1: General theory
Tsay, J. J., & Arora, J. S. (1990) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/0045-7825(90)90109-y · Cited by 185 · cited 1×
“In early works, the general formulation of sensitivity analysis was introduced by, for example, these studies (Ryu et al. 1985; Tsay and Arora 1989, 1990; Vidal and Haber 1993; Vidal et al. 1991; Tortorelli 1992; Kleiber and Kowalczyk 1996; Michaleris et al. 1994).”
MethodAn explicit length scale control approach in SIMP-based topology optimization
Zhang, W., Zhong, W., & Guo, X. (2014) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2014.08.027 · Cited by 184 · cited 2×
“Targeting conventional machining and injection molding, the length scale issue (Allaire et al. 2016; Guest 2009; Guest et al. 2004; Guo et al. 2014a; Poulsen 2003; Zhang et al. 2014) no-undercut restriction (Xia et al.”
BackgroundMulti-material topology optimization considering interface behavior via XFEM and level set method
Liu, P., Luo, Y., & Kang, Z. (2016) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2016.05.016 · Cited by 184 · cited 4×
“On the other hand, it is still an issue to improve the numerical analysis accuracy around the interface areas [157] and reflect the actual behavior of printed materials [158,159].”
BackgroundInfluentialSelf-citationStructural design sensitivity analysis of nonlinear response
Ryu, Y. S., Haririan, M., Wu, C. C., & Arora, J. S. (1985) · Computers & Structures · doi:10.1016/0045-7949(85)90247-0 · Cited by 181 · cited 2×
“In early works, the general formulation of sensitivity analysis was introduced by, for example, these studies (Ryu et al. 1985; Tsay and Arora 1989, 1990; Vidal and Haber 1993; Vidal et al. 1991; Tortorelli 1992; Kleiber and Kowalczyk 1996; Michaleris et al. 1994).”
BackgroundMethodWelding Deformation and Residual Stress Prevention
(2012) · Elsevier eBooks · doi:10.1016/c2011-0-06199-9 · Cited by 179
Support slimming for single material based additive manufacturing
Hu, K., Jin, S., & Wang, C. C. L. (2015) · Computer-Aided Design · doi:10.1016/j.cad.2015.03.001 · Cited by 178 · cited 2×
“Hu et al. (2015) developed a shape optimization based support slimming method, which slimmed the support by varying the part shape.”
MethodSelf-citationTwo-Scale Topology Optimization with Microstructures
Zhu, B., Skouras, M., Chen, D., & Matusik, W. (2017) · ACM Transactions on Graphics · doi:10.1145/3072959.3095815 · Cited by 172 · cited 3×
“[103] Zhu B, Skouras M, Chen D, Matusik W.”
BackgroundMethodYoon, G. H., & Kim, Y. Y. (2004) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2004.09.005 · Cited by 170 · cited 3×
“The important ones include internal nodal forces exclusion scheme by Buhl et al. (2000) and Pedersen et al. (2001), element removal and reintroduction scheme by Bruns and Tortorelli (1998), connectivity parametrization by Yoon and Kim (2005), improved nonlinear solver via Levenberg-Marquardt method by Kawamoto (2009),…”
MethodJung, H. S., & Cho, S. (2004) · Finite Elements in Analysis and Design · doi:10.1016/j.finel.2004.06.002 · Cited by 169 · cited 1×
“To this end, Jung and Cho (2004) studied reliability-based topology optimization for three-dimensional geometrically nonlinear structures in the presence of uncertainties of material properties and external loads.”
BackgroundStress-related topology optimization of continuum structures involving multi-phase materials
Guo, X., Zhang, W., & Zhong, W. (2013) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2013.10.003 · Cited by 169 · cited 3×
“Then, the optimization problem can be solved similar to other multi-level set topology optimization problems (Wang and Wang 2004; Wang et al. 2015; Liu and Ma 2017; Guo et al. 2014b).”
BackgroundMethodLiu, S., Li, Q., Chen, W., Tong, L., & Cheng, G. (2015) · Frontiers of Mechanical Engineering · doi:10.1007/s11465-015-0340-3 · Cited by 169 · cited 4×
“40 [251] Liu S, Li Q, Chen W, Tong L, Cheng G.”
BackgroundMethodInfluentialTakezawa, A., & Kobashi, M. (2017) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2017.07.054 · Cited by 169 · cited 2×
“Utilizing multi-material photopolymer AM, Takezawa et al. realized negative thermal expansion (Takezawa et al. 2015) and large positive thermal expansion (Takezawa and Kobashi 2017).”
MethodSelf-citationZhang, P., Liu, J., & To, A. C. (2016) · Scripta Materialia · doi:10.1016/j.scriptamat.2016.10.021 · Cited by 168 · cited 3×
“11 (a) Truss/beam infill [62] (b) Variable-density periodic lattice infill [20]”
BackgroundMethodSelf-citationDumas, J., Hergel, J., & Lefèbvre, S. (2014) · ACM Transactions on Graphics · doi:10.1145/2601097.2601153 · Cited by 167
Structural topology optimization considering connectivity constraint
Li, Q., Chen, W., Liu, S., & Tong, L. (2016) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-016-1459-5 · Cited by 167 · cited 2×
“[252] demonstrated a method to eliminate internal voids through introducing an artificial heat assigned to the void regions with zero temperature boundary conditions on the edges of the design domain.”
MethodRoboFDM: A robotic system for support-free fabrication using FDM
Wu, C., Dai, C., Fang, G., Liu, Y., & Wang, C. C. L. (2017) · Proceedings - IEEE International Conference on Robotics and Automation/Proceedings · doi:10.1109/icra.2017.7989140 · Cited by 163 · cited 1×
“10), where the part is printed in multiple directions (Song et al. 2015; Singh and Dutta 2008; Wu et al. 2017; Zhao et al. 2013), and material properties in each building area would be different.”
BackgroundSelf-citationStructural topology optimization based on non-local Shepard interpolation of density field
Kang, Z., & Wang, Y. (2011) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2011.09.001 · Cited by 160 · cited 2×
“…through, for example, adding auxiliary density fields in a rotated coordinate system and build the connection through density field projection (Kang and Wang 2012, 2011). ii) Even though 2.5D post-machining has its advantages in cost and efficiency (Liu and Ma 2015; Liu and To 2016), the…”
BackgroundSelf-citationDesign of three dimensional isotropic microstructures for maximized stiffness and conductivity
Challis, V. J., Roberts, A. P., & Wilkins, A. (2008) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2008.02.025 · Cited by 159 · cited 4×
“Their main scope realizes extraordinary effective physical properties through lattice shapes such as the one close to theoretical limits [107,108], negative Poison’s ratio in elastic problem [109], negative thermal expansion [110], and acoustic negative bulk modulus [111].”
BackgroundInfluentialLiu, C., Du, Z., Zhang, W., Zhu, Y., & Guo, X. (2017) · Journal of Applied Mechanics · doi:10.1115/1.4036941 · Cited by 158
Development of a Low-Cost Parallel Kinematic Machine for Multidirectional Additive Manufacturing
Song, X., Pan, Y., & Chen, Y. (2014) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4028897 · Cited by 153 · cited 2×
“Alternative mechanisms to achieve multi-axis extrusion [133]”
BackgroundPerceptual models of preference in 3D printing direction
Zhang, X., Le, X., Panotopoulou, A., Whiting, E., & Wang, C. C. L. (2015) · ACM Transactions on Graphics · doi:10.1145/2816795.2818121 · Cited by 153 · cited 7×
“The diameters and nodal positions of the struts can be effectively optimized with discrete topology optimization methods, such as the ground structure optimization (Zhang et al. 2015b; Wang et al. 2013).”
BackgroundMethodInfluentialSelf-citationCross-sectional structural analysis for 3D printing optimization
Umetani, N., & Schmidt, R. (2013) · SIGGRAPH Asia Technical Briefs · doi:10.1145/2542355.2542361 · Cited by 152 · cited 1×
“Therefore, optimizing the build direction has attracted the early attention and effective improvement of mechanical performance (Ulu et al. 2015; Umetani and Schmidt 2013; Liu 2016) has been observed.”
BackgroundTopology optimization under uncertainty via non-intrusive polynomial chaos expansion
Keshavarzzadeh, V., Fernández, F., & Tortorelli, D. A. (2017) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2017.01.019 · Cited by 149 · cited 1×
“Recently, Keshavarzzadeh et al. (2017) presented a study on density-based topology optimization under manufacturing uncertainty by integrating the non-intrusive polynomial chaos expansion with design sensitivity analysis.”
BackgroundA new level-set based approach to shape and topology optimization under geometric uncertainty
Chen, S., & Chen, W. (2011) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-011-0660-9 · Cited by 147 · cited 2×
“Chen and Chen (2011) employed a boundary velocity perturbation approach to introducing geometrical uncertainty into topology optimization.”
MethodSelf-citationCheng, L., Liu, J., Liang, X. Y., & To, A. C. (2018) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2017.12.024 · Cited by 146 · cited 1×
“Recently, this approach has been extended to perform AM heat conduction design (Cheng et al. 2018a, 2018b).”
MethodSelf-citationComposite material design of two‐dimensional structures using the homogenization design method
FUJII, D., Chen, B. C., & Kikuchi, N. (2001) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.105 · Cited by 144 · cited 2×
“Both homogeneous (Wang et al. 2016b; Huang et al. 2013a; Niu et al. 2009; Guo et al. 2015; Deng et al. 2013; Fujii et al. 2001; Zhang and Sun 2006; Liu et al. 2008) and heterogeneous (Coelho et al. 2008, 2011; Rodrigues et al. 2002; Xia and Breitkopf 2014, 2015; Wang et al. 2017c; Sivapuram et al.…”
BackgroundLuo, Y., Wang, M. Y., & Kang, Z. (2014) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2014.12.023 · Cited by 140 · cited 2×
“…by Kawamoto (2009), element deformation scaling by van Dijk et al. (2014), energy interpolation scheme by Wang et al. (2014a), additive hyperelasticity technique by Luo et al. (2015) and the recent DOF removal technique developed under the explicit MMC/ MMV–based framework by Zhang et al. (2017b).”
MethodSelf-citationA topology optimization procedure for reinforced concrete structures
Amir, O. (2012) · Computers & Structures · doi:10.1016/j.compstruc.2012.10.011 · Cited by 140 · cited 2×
“For a continuous damage model considering single- and multi-material, readers are referred to the studies by Kato et al. (2009), Kato and Ramm (2013), Amir (2013).”
BackgroundTopology optimization for maximizing the fracture resistance of quasi-brittle composites
Xia, L., Da, D., & Yvonnet, J. (2017) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2017.12.021 · Cited by 137 · cited 2×
“More recently, Xia et al. proposed a BESO based fracture resistant topology optimization that accounts for the complete fracturing process in quasi-brittle composites (Xia et al. 2018).”
BackgroundLazarov, B. S., Schevenels, M., & Sigmund, O. (2012) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-012-0791-7 · Cited by 136 · cited 3×
“[237] Lazarov BS, Schevenels M, Sigmund O.”
MethodInfluentialDesign sensitivity analysis of non‐linear structural systems part I: Theory
Choi, K. K., & Santos, J. L. T. (1987) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.1620241103 · Cited by 135 · cited 2×
“The optimization of discrete structures, like trusses or beams, considering material and geometric nonlinearities were discussed in Choi and Santos [213], Ohsaki and Arora [214], and Ohsaki and Ikeda [215].”
BackgroundLiu, J., & To, A. C. (2017) · Computer-Aided Design · doi:10.1016/j.cad.2017.05.003 · Cited by 135 · cited 2×
“As an alternative solution, Liu and To [49] developed an overhang-free level set topology optimization method, where each level set function corresponds to a printing layer (or a bundle of layers with the same cross-section shape) and a novel multi-level set interpolation was proposed to constraining the spatial relat…”
MethodSelf-citationWang, X., Zhang, P., Ludwick, S. J., Belski, E., & To, A. C. (2017) · Additive manufacturing · doi:10.1016/j.addma.2017.10.001 · Cited by 134 · cited 7×
“On the other hand, the self-support constraints were not considered (Wang et al. 2017a) and support in dissolvable materials has to be built (Lu et al. 2014), which makes this approach only suitable for polymer printing.”
BackgroundMethodInfluentialSelf-citationUlu, E., Korkmaz, E., Yay, K., Burak Ozdoganlar, O., & Burak Kara, L. (2015) · Journal of Mechanical Design · doi:10.1115/1.4030998 · Cited by 132 · cited 1×
“Therefore, optimizing the build direction has attracted the early attention and effective improvement of mechanical performance (Ulu et al. 2015; Umetani and Schmidt 2013; Liu 2016) has been observed.”
BackgroundTopology optimization of an acoustic metamaterial with negative bulk modulus using local resonance
Lu, L., Yamamoto, T., Otomori, M., Yamada, T., Izui, K., & Nishiwaki, S. (2013) · Finite Elements in Analysis and Design · doi:10.1016/j.finel.2013.04.005 · Cited by 130 · cited 3×
“Their main scope realizes extraordinary effective physical properties through lattice shapes such as the one close to theoretical limits [107,108], negative Poison’s ratio in elastic problem [109], negative thermal expansion [110], and acoustic negative bulk modulus [111].”
BackgroundMeisel, N. A., & Williams, C. B. (2015) · Journal of Mechanical Design · doi:10.1115/1.4030991 · Cited by 130 · cited 1×
“In summary, we have seen significant research achievements in the past few years and also the numerous successful printings of the topological designs (Cheng et al. 2017; Vogiatzis et al. 2017a; Gaynor et al. 2014; Maute et al. 2015; Meisel and Williams 2015; Dede et al. 2015; Smith et al. 2016).”
BackgroundTopology optimization of self-supporting structures with polygon features for additive manufacturing
Zhang, W., & Lü, Z. (2018) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2018.01.037 · Cited by 130 · cited 3×
“Attempts have been made to address these issues, for example, through parallel computing (Coelho et al. 2008, 2011; Wang et al. 2017c) for the former and imposing material variation constraints (Wang et al. 2017c; Zhou and Li 2008) for the latter.”
BackgroundJalalpour, M., & Tootkaboni, M. (2015) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-015-1360-7 · Cited by 128 · cited 2×
“Jalalpour and Tootkaboni [238] presented a reliability-based topology optimization method considering material property uncertainty in continuum domains using second-order”
BackgroundBogomolni, M., & Amir, O. (2012) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.4253 · Cited by 127 · cited 7×
“Later on, Bogomolny and Amir [188] incorporated topology optimization with the Drucker-Prager plastic model for reinforced concrete”
BackgroundMethodInfluentialAn explicit parameterization for casting constraints in gradient driven topology optimization
Gersborg, A. R., & Andreasen, C. S. (2011) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-011-0632-0 · Cited by 127 · cited 1×
“The casting-SIMP (Solid Isotropic Material with Penalty) (Gersborg and Andreasen 2011) was used to remove materials from boundary to surface, so that undercut or interior void was avoided.”
MethodZhang, X., & Kang, Z. (2014) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2014.08.011 · Cited by 126 · cited 2×
“…actuators and active vibration control structures, have been well studied using multi-material topology optimization formulations (Carbonari et al. 2009, 2005; Kang et al. 2011), or integrated optimization of structural topology and control parameters (Zhan and Tong 2008; Zhang and Kang 2014).”
BackgroundMethodSelf-citationAmir, O., & Sigmund, O. (2012) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-012-0817-1 · Cited by 125 · cited 10×
“Through early tries of AM fabrication (Sigmund et al. 1998), Hollister (2005) performed the first utilization of the topology-optimized lattice in the real-world application by AM technology.”
BackgroundMethodInfluentialMulti-scale robust design and optimization considering load uncertainties
Guo, X., Zhao, X., Zhang, W., Yan, J., & Sun, G. (2014) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2014.10.014 · Cited by 125 · cited 2×
“Both homogeneous (Wang et al. 2016b; Huang et al. 2013a; Niu et al. 2009; Guo et al. 2015; Deng et al. 2013; Fujii et al. 2001; Zhang and Sun 2006; Liu et al. 2008) and heterogeneous (Coelho et al. 2008, 2011; Rodrigues et al. 2002; Xia and Breitkopf 2014, 2015; Wang et al. 2017c; Sivapuram et al.…”
BackgroundVoigt-Reuss topology optimization for structures with nonlinear material behaviors
Swan, C. C., & Kosaka, I. (1997) · International Journal for Numerical Methods in Engineering · doi:10.1002/(sici)1097-0207(19971030)40:20<3785::aid-nme240>3.0.co;2-v · Cited by 125 · cited 5×
“However, to the best of the present authors’ knowledge, the number of studies on a method of optimization which considers both nonlinear structural response and multimaterial is limited [185,188,189].”
BackgroundMethodInfluentialComposite structures optimization using sequential convex programming
Bruyneel, M., & Fleury, C. (2002) · Advances in Engineering Software · doi:10.1016/s0965-9978(02)00053-4 · Cited by 123 · cited 1×
“Besides, concurrent build direction and topology optimization problem is trivial to solve, for example, through continuous orientation optimization (Bruyneel and Fleury 2002; Liu et al. 2015b).”
BackgroundImplicit slicing for functionally tailored additive manufacturing
Steuben, J. C., Iliopoulos, A., & Michopoulos, J. G. (2016) · Computer-Aided Design · doi:10.1016/j.cad.2016.04.003 · Cited by 123 · cited 1×
“Another recent trend to fabricate the results of topology optimization in implicit representation is to direct slicing implicit solids, which can avoid the robustness issue when generating the intermediate mesh representation (Huang et al. 2013b; Huang et al. 2014; Steuben et al. 2016).”
BackgroundAdditive Manufacturing Along Principal Stress Lines
Tam, K.-M. M., & Mueller, C. (2017) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2017.0001 · Cited by 121
Topology optimization of hyperelastic bodies including non-zero prescribed displacements
Klarbring, A., & Strömberg, N. (2012) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-012-0819-z · Cited by 118 · cited 3×
“Some important applications in this field include maximization of the critical load of a continuum structure with large displacement by Kemmler et al. (2005), consideration of hyperelastic bodies with non-zero prescribed displacement by Klarbring and Strömberg (2013) and topology optimization of snap-through problems…”
MethodA Hybrid Geometric Modeling Method for Large Scale Conformal Cellular Structures
Wang, H., Chen, Y., & Rosen, D. W. (2005) · ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (IDETC/CIE) · doi:10.1115/detc2005-85366 · Cited by 117 · cited 2×
“Under the level set framework, (Wang and Wang 2004; Wang et al. 2005b) proposed the ‘color’ level set method (CLSM) for multi-material topology optimization, which was later widely followed.”
MethodSalvati, E., Lunt, A. J. G., Ying, S., Sui, T., Zhang, H. J., Heason, C. P., Baxter, G. J., & Korsunsky, A. M. (2017) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2017.03.005 · Cited by 117 · cited 1×
“It is generally a smooth function of the distance from the boundary to the interior (Salvati et al. 2017).”
BackgroundConcurrent deposition path planning and structural topology optimization for additive manufacturing
Liu, J., & Yu, H. (2017) · Rapid Prototyping Journal · doi:10.1108/rpj-05-2016-0087 · Cited by 113 · cited 6×
“Liu and Yu (2017) performed the concurrent raster direction and topology optimization by building continuous contour-offset tool paths.”
BackgroundResultInfluentialSelf-citationDesign sensitivity analysis for rate-independent elastoplasticity
Vidal, C. A., & Haber, R. B. (1993) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/0045-7825(93)90074-8 · Cited by 111 · cited 1×
“In early works, the general formulation of sensitivity analysis was introduced by, for example, these studies (Ryu et al. 1985; Tsay and Arora 1989, 1990; Vidal and Haber 1993; Vidal et al. 1991; Tortorelli 1992; Kleiber and Kowalczyk 1996; Michaleris et al. 1994).”
MethodVermaak, N., Michailidis, G., Parry, G., Estevez, R., Allaire, G., & Brechet, Y. J. M. (2014) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-014-1074-2 · Cited by 111 · cited 2×
“On the other hand, it is still an issue to improve the numerical analysis accuracy around the interface areas (Vermaak et al. 2014) and reflect the actual behavior of printed materials (Rosen 2016; Liu et al. 2016).”
BackgroundRobust structural topology optimization considering boundary uncertainties
Guo, X., Zhang, W., & Zhang, L. (2012) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2012.09.005 · Cited by 109 · cited 1×
“The efficiency of robust topology optimization was further improved by Guo et al. (2013) who utilized the Schwarz inequality to transform the original bi-level optimization problem into a single-level optimization problem.”
MethodAIMS – A Metal Additive-hybrid Manufacturing System: System Architecture and Attributes
Manogharan, G. P., Wysk, R. A., Harrysson, O. L. A., & Aman, R. (2015) · Procedia Manufacturing · doi:10.1016/j.promfg.2015.09.021 · Cited by 109 · cited 3×
“Hence, if tight tolerances in size, form, and surface finish are required, subtractive machining is necessary to post-process the AM component, which transforms the AM into a hybrid manufacturing strategy (Manogharan et al. 2015).”
BackgroundInfluentialMedial axis tree—an internal supporting structure for 3D printing
Zhang, X., Xia, Y., Wang, J., Yang, Z., Tu, C., & Wang, W. (2015) · Computer Aided Geometric Design · doi:10.1016/j.cagd.2015.03.012 · Cited by 108 · cited 7×
“[60] Zhang X, Xia Y, Wang J, Yang Z, Tu C, Wang W.”
BackgroundMethodInfluentialRobbins, J., Owen, S. J., Clark, B. W., & Voth, T. E. (2016) · Additive manufacturing · doi:10.1016/j.addma.2016.06.013 · Cited by 108 · cited 4×
“[71] reconstructed the lattice topology optimization result by deforming the lattice base shapes to fit the hexahedral mesh elements.”
BackgroundMethodInfluentialAndreassen, E., & Jensen, J. S. (2013) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-013-1018-2 · Cited by 105 · cited 1×
“For the ones dealing with viscoelasticity and viscoplasticity, the readers are referred to the references (Prasad and Diaz 2009; Andreassen and Jensen 2014; El-Sabbagh and Baz 2014; Chen and Liu 2014; James and Waisman 2015b; Fritzen et al. 2016; Ivarsson et al. n.d.).”
BackgroundA new multi-material level set topology optimization method with the length scale control capability
Liu, J., & Ma, Y. (2017) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2017.10.011 · Cited by 105 · cited 2×
“An alternative level set method to eliminate the overlapping area of the level set functions was developed by [154] where the strategy of filling the overlapping area with an artificial weak material was proposed.”
MethodSelf-citationLarge deformations and stability in topology optimization
Kemmler, R., Lipka, A., & Ramm, E. (2005) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-005-0534-0 · Cited by 104 · cited 2×
“Some important applications in this field include maximization of the critical load of a continuum structure with large displacement by Kemmler et al. (2005), consideration of hyperelastic bodies with non-zero prescribed displacement by Klarbring and Strömberg (2013) and topology optimization of…”
BackgroundMethodA level set based method for the optimization of cast part
Xia, Q., Shi, T., Wang, M. Y., & Liu, S. (2009) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-009-0444-7 · Cited by 104 · cited 3×
“…machining and injection molding, the length scale issue (Allaire et al. 2016; Guest 2009; Guest et al. 2004; Guo et al. 2014a; Poulsen 2003; Zhang et al. 2014) no-undercut restriction (Xia et al. 2010; Wang and Kang 2017), and featuredriven design (Liu andMa 2015) have been the primary focus.”
BackgroundMethodOn compliance and buckling objective functions in topology optimization of snap-through problems
Lindgaard, E., & Dahl, J. (2012) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-012-0832-2 · Cited by 102 · cited 3×
“Some important applications in this field include maximization of the critical load of a continuum structure with large displacement by Kemmler et al. (2005), consideration of hyperelastic bodies with non-zero prescribed displacement by Klarbring and Strömberg (2013) and topology optimization of snap-through problems…”
MethodPart orientation optimisation for the additive layer manufacture of metal components
Morgan, H. D., Cherry, J. A., Jonnalagadda, S., Ewing, D., & Sienz, J. (2016) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-8151-6 · Cited by 102 · cited 3×
“Optimization of the build directionwould also effectively reduce the support material consumption (Morgan et al. 2016; Muir et al. 2014).”
BackgroundLevel Set Topology Optimization of Printed Active Composites
Maute, K., Tkachuk, A., Wu, J., Jerry Qi, H., Ding, Z., & Dunn, M. L. (2015) · Journal of Mechanical Design · doi:10.1115/1.4030994 · Cited by 101 · cited 6×
“A few topology optimization results have been realized into real products through multi-material AM (Vogiatzis et al. 2017a; Gaynor et al. 2014; Maute et al. 2015).”
BackgroundMethodInfluentialTopology optimization based on finite strain plasticity
Wallin, M., Jönsson, V., & Wingren, E. (2016) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-016-1435-0 · Cited by 101 · cited 1×
“Wallin et al. (2016) proposed topology optimization considering finite elastoplastic deformation and also Zhang et al. (2016b) introduced an approach assuming anisotropic elastoplasticity based on the adjoint method (Michaleris et al. 1994).”
MethodA New Level-Set Based Approach to Shape and Topology Optimization under Geometric Uncertainty
Chen, S., & Chen, W. (2010) · AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference (MAO) · doi:10.2514/6.2010-9314 · Cited by 100
Self-citationDapogny, C., Estevez, R., Faure, A., & Michailidis, G. (2018) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2018.09.036 · Cited by 98 · cited 2×
“[140] Dapogny C, Estevez R, Faure A, Michailidis G.”
BackgroundJungHyun-Seung, & ChoSeonho (2004) · Finite Elements in Analysis and Design · doi:10.5555/1707856.1707957 · Cited by 98
A level set approach for optimal design of smart energy harvesters
Chen, S., Gonella, S., Chen, W., & Liu, W. K. (2010) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2010.04.008 · Cited by 97 · cited 2×
“The RLSM was first introduced by (Merriman et al. 1994; Zhang et al. 2008) for modeling multiphase flow and was later applied to multi-material topology optimization of smart energy harvesters (Chen et al. 2010) and metamaterials (Vogiatzis et al. 2017a).”
MethodSelf-citationStrength-based topology optimization for anisotropic parts
Mirzendehdel, A. M., Rankouhi, B., & Suresh, K. (2017) · Additive manufacturing · doi:10.1016/j.addma.2017.11.007 · Cited by 97 · cited 3×
“[126] Mirzendehdel AM, Rankouhi B, Suresh K.”
MethodSelf-citation3D Texture Mapping for Rapid Manufacturing
Chen, Y. (2007) · Computer-Aided Design and Applications · doi:10.1080/16864360.2007.10738509 · Cited by 96 · cited 1×
“A simple approach is to use truss model to perform the infill (Chen 2007; Wang et al. 2005a; Zhang et al. 2015b; Wang et al. 2017a).”
MethodAnalytical sensitivity in topology optimization for elastoplastic composites
Kato, J., Hoshiba, H., Takase, S., Terada, K., & KYOYA, T. (2015) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-015-1246-8 · Cited by 94 · cited 5×
“However, to the best of the present authors’ knowledge, the number of studies on a method of optimization which considers both nonlinear structural response and multimaterial is limited [185,188,189].”
BackgroundInfluentialSelf-citationTopology optimization of viscoelastic structures using a time-dependent adjoint method
James, K. A., & Waisman, H. (2014) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2014.11.012 · Cited by 94 · cited 2×
“James and Waisman (2015a) used an elastic-damage model with constraints on damage and compliance for obtaining minimum weight designs.”
BackgroundMethodCarbonari, R. C., Silva, E. C. N., & Paulino, G. H. (2008) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.2403 · Cited by 94 · cited 1×
“…as piezoelectric actuators and active vibration control structures, have been well studied using multi-material topology optimization formulations (Carbonari et al. 2009, 2005; Kang et al. 2011), or integrated optimization of structural topology and control parameters (Zhan and Tong 2008; Zhang…”
BackgroundTwo-scale topology optimization with microstructures
Zhu, B., Skouras, M., Chen, D., & Matusik, W. (2017) · ACM Transactions on Graphics · doi:10.1145/3072959.3126835 · Cited by 94
Kang, Z., & Zhang, W. (2015) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2015.11.025 · Cited by 93 · cited 2×
“When sufficient samples are not available to permit a precise probability model of the uncertain inputs, non-probabilistic convex models (Kang and Zhang 2016) providing smooth bound descriptions of the uncertainties become attractive for acquiring reliable topology optimization solutions (Luo et al.”
BackgroundSelf-citationRobust topology optimization accounting for misplacement of material
Jansen, M., Lombaert, G., Diehl, M., Lazarov, B. S., Sigmund, O., & Schevenels, M. (2012) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-012-0835-z · Cited by 92 · cited 3×
“Jansen et al. (2013) approached the problem through a density filter-based approach incorporating a random field in the perturbation-altered filter kernel formulation.”
BackgroundMethodInfluentialNakshatrala, P. B., & Tortorelli, D. A. (2015) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2015.05.004 · Cited by 91 · cited 1×
“Nakshatrala and Tortorelli (2015) proposed a topology optimization framework for energy dissipationmaximization subjected to impact loadings wherein the material response was modeled with vonMises plasticity.”
BackgroundPorous composite with negative thermal expansion obtained by photopolymer additive manufacturing
Takezawa, A., Kobashi, M., & Kitamura, M. (2015) · APL Materials · doi:10.1063/1.4926759 · Cited by 91 · cited 2×
“Utilizing multi-material photopolymer AM, Takezawa et al. realized negative thermal expansion (Takezawa et al. 2015) and large positive thermal expansion (Takezawa and Kobashi 2017).”
BackgroundMethodSelf-citationMass, Y., & Amir, O. (2017) · Additive manufacturing · doi:10.1016/j.addma.2017.08.001 · Cited by 88 · cited 6×
“Mass and Amir [46] developed a two-step approach to improve the printablity: first optimizing a discrete truss-based model to address the self-support requirement and then performing the continuum topology optimization with the discrete design as the start.”
MethodInfluentialZhang, W., & Kang, Z. (2016) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.5344 · Cited by 85 · cited 10×
“Note that, there are also other methods to generate internal void-free topological design (Xia et al. 2010; Wang and Kang 2017; Allaire et al. 2013; Guest and Zhu 2012).”
BackgroundMethodInfluentialSelf-citationTopology optimization of energy absorbing structures with maximum damage constraint
Li, L., Zhang, G., & Khandelwal, K. (2017) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.5531 · Cited by 84 · cited 1×
“[201], Li and Khandelwal [202], Alberdi and Khandelwal [203], coupled and uncoupled damage models were incorporated into elastoplastic topology optimization for damageresistant energy absorption structure designs.”
MethodSelf-citationSolid modeling of polyhedral objects by Layered Depth-Normal Images on the GPU
Wang, C. C. L., Leung, Y., & Chen, Y. (2010) · Computer-Aided Design · doi:10.1016/j.cad.2010.02.001 · Cited by 82 · cited 1×
“Efforts have been made by Wang and others (Wang and Manocha 2013; Wang et al. 2010) to conduct highly parallel algorithms running on many-core GPUs to improve the efficiency.”
BackgroundSelf-citationXia, Q., & Wang, M. Y. (2008) · Computer-Aided Design · doi:10.1016/j.cad.2008.01.014 · Cited by 81
3D level-set topology optimization: a machining feature-based approach
Liu, J., & Ma, Y. (2015) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-015-1263-7 · Cited by 80 · cited 5×
“For instance, 2.5D machining is much cheaper and efficient than 3D CNC machining (Liu and Ma 2015).”
BackgroundInfluentialSelf-citationSloping wall structure support generation for fused deposition modeling
Xiaomao, H., Ye, C., Wu, S., Guo, K., & Mo, J. (2008) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-008-1675-2 · Cited by 79 · cited 2×
“So far, several structural patterns have been used to slim down the support, including the sloping wall structure (Huang et al. 2009), tree-like structure (Vanek et al. 2014; Gan and Wong 2016), bridge-like scaffold (Dumas et al. 2014), and repetitive cellular structures (Strano et al. 2013;…”
MethodStructure-material integrated design by level sets
Wang, Y., Wang, M. Y., & Chen, F. (2016) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-016-1430-5 · Cited by 79
A structural topology design method based on principal stress line
Kwok, T.-H., Li, Y., & Chen, Y. (2016) · Computer-Aided Design · doi:10.1016/j.cad.2016.07.005 · Cited by 77 · cited 2×
“In addition, the principal stress method [63,64] and the moving morphable component (MMC) method [65], which stemmed from conventional continuum topology optimization, can also be applied to design a similar type of porous infill.”
MethodExplicit layout control in optimal design of structural systems with multiple embedding components
Zhang, W., Zhong, W., & Guo, X. (2015) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2015.03.007 · Cited by 76 · cited 1×
“Therein, geometrical constraints, including but not limited to non-overlap, shape-preserving and minimum distance constraints among the embedded components, are often to be observed to avoid possible interference of different functionalities [222,223].”
BackgroundTopological design of compliant smart structures with embedded movable actuators
Wang, Y., Luo, Z., Zhang, X., & Kang, Z. (2014) · Smart Materials and Structures · doi:10.1088/0964-1726/23/4/045024 · Cited by 76 · cited 3×
“proposed a topology optimization formulation incorporating commercially available regular-shaped PZT actuators into the structure to enable in-plane motion [232].”
BackgroundMethodSelf-citationEvolutionary topology optimization of elastoplastic structures
Xia, L., Fritzen, F., & Breitkopf, P. (2016) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-016-1523-1 · Cited by 76 · cited 2×
“[193] adopted BESO method for elastoplastic structure design.”
MethodCasting and Milling Restrictions in Topology Optimization via Projection-Based Algorithms
Guest, J. K., & Zhu, M. (2012) · ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (IDETC/CIE) · doi:10.1115/detc2012-71507 · Cited by 75 · cited 1×
“Note that, there are also other methods to generate internal void-free topological design (Xia et al. 2010; Wang and Kang 2017; Allaire et al. 2013; Guest and Zhu 2012).”
MethodA nodal variable method of structural topology optimization based on Shepard interpolant
Kang, Z., & Wang, Y. (2011) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.3321 · Cited by 75 · cited 2×
“…through, for example, adding auxiliary density fields in a rotated coordinate system and build the connection through density field projection (Kang and Wang 2012, 2011). ii) Even though 2.5D post-machining has its advantages in cost and efficiency (Liu and Ma 2015; Liu and To 2016), the…”
BackgroundSelf-citationTaheri, A. H., & Suresh, K. (2016) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.5303 · Cited by 75 · cited 2×
“…is that producing part with functionally graded material is enabled by AM and there are different topology optimization approaches available for designing this type of structures (Xia and Wang 2008; Dunning et al. 2015; Paulino et al. 2009; Taheri and Suresh 2017; Conlan-Smith et al. 2017).”
BackgroundMethodSelf-citationIntegrated Optimization of Material Layout and Control Voltage for Piezoelectric Laminated Plates
Kang, Z., & Tong, L. (2007) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x07084527 · Cited by 74
Self-citationTopology optimization of multiscale elastoviscoplastic structures
Fritzen, F., Xia, L., Leuschner, M., & Breitkopf, P. (2015) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.5122 · Cited by 74 · cited 1×
“For the ones dealing with viscoelasticity and viscoplasticity, the readers are referred to the references (Prasad and Diaz 2009; Andreassen and Jensen 2014; El-Sabbagh and Baz 2014; Chen and Liu 2014; James and Waisman 2015b; Fritzen et al. 2016; Ivarsson et al. n.d.).”
BackgroundChen, W., & Liu, S. (2014) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-014-1049-3 · Cited by 73 · cited 1×
“For the ones dealing with viscoelasticity and viscoplasticity, the readers are referred to the references (Prasad and Diaz 2009; Andreassen and Jensen 2014; El-Sabbagh and Baz 2014; Chen and Liu 2014; James and Waisman 2015b; Fritzen et al. 2016; Ivarsson et al. n.d.).”
BackgroundOptimal design of periodic functionally graded composites with prescribed properties
Paulino, G. H., Silva, E. C. N., & Le, C. H. (2008) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-008-0300-1 · Cited by 73 · cited 2×
“…is that producing part with functionally graded material is enabled by AM and there are different topology optimization approaches available for designing this type of structures (Xia and Wang 2008; Dunning et al. 2015; Paulino et al. 2009; Taheri and Suresh 2017; Conlan-Smith et al. 2017).”
BackgroundMethodVogiatzis, P., Ma, M., Chen, S., & Gu, X. D. (2017) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2017.09.012 · Cited by 72 · cited 1×
“15 Extraction of geometric information from the level set model (Vogiatzis et al. 2018) 2474 J.”
BackgroundSelf-citationCheng, L., Liu, J., & To, A. C. (2018) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-018-1905-7 · Cited by 72 · cited 2×
“12 perform AM heat conduction design [81,82].”
MethodSelf-citationThe consistent tangent operator for design sensitivity analysis of history-dependent response
Vidal, C. A., Lee, H.-S., & Haber, R. B. (1991) · Computing Systems in Engineering · doi:10.1016/0956-0521(91)90053-8 · Cited by 71 · cited 2×
“In early works, the general formulation of sensitivity analysis was introduced by, for example, these studies (Ryu et al. 1985; Tsay and Arora 1989, 1990; Vidal and Haber 1993; Vidal et al. 1991; Tortorelli 1992; Kleiber and Kowalczyk 1996; Michaleris et al. 1994).”
Method
Cited by
Metal additive manufacturing in aerospace: A review
Blakey-Milner, B., Gradl, P., Snedden, G., Brooks, M., Pitot, J., Lopez, E., Leary, M., Berto, F., & du Plessis, A. (2021) · Materials & Design · doi:10.1016/j.matdes.2021.110008 · Cited by 2,263
Advances in 4D Printing: Materials and Applications
Kuang, X., Roach, D. J., Wu, J., Hamel, C. M., Ding, Z., Wang, T., Dunn, M. L., & Qi, H. J. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201805290 · Cited by 1,095
du Plessis, A., Yadroitsava, I., & Yadroitsev, I. (2020) · Materials & Design · doi:10.1016/j.matdes.2019.108385 · Cited by 712
Topology optimization of multi-scale structures: a review
Wu, J., Sigmund, O., & Groen, J. P. (2021) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-021-02881-8 · Cited by 688
Paolini, A., Kollmannsberger, S., & Rank, E. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.100894 · Cited by 673
“However, aspects such as support structures, minimum length-scales, material anisotropy, and multiple scales need to be considered [124].”
Background
Metadata
- Authors
- Liu, J., Gaynor, A. T., Chen, S., Kang, Z., Suresh, K., Takezawa, A., Li, L., Kato, J., Tang, J., Wang, C. C. L., Cheng, L., Liang, X., & To, A. C.
- Affiliations
- University of Pittsburgh (US)
- DEVCOM Army Research Laboratory (US)
- Stony Brook University (US)
- Dalian University of Technology (CN)
- University of Wisconsin–Madison (US)
- Hiroshima University (JP)
- University of Notre Dame (US)
- Tohoku University (JP)
- Central South University (CN)
- Delft University of Technology (NL)
- Corresponding author
- To, Albert. C.
- ORCID
- Venue
- Structural and Multidisciplinary Optimization
- Published
- 2018-05-03
- Volume
- 57
- Issue
- 6
- Pages
- 2457-2483
- ISSN
- 1615-147X (ISSN-L)
- 1615-1488
- OpenAlex
- W2800239682
- Cited by
- 870
- References
- 281
- Citations by year
- 2026: 86 · 2025: 95 · 2024: 108 · 2023: 127 · 2022: 128 · 2021: 126 · 2020: 119 · 2019: 69 · 2018: 12
- FWCI
- 73.27
- Type
- journal article
- Language
- en
- Open access
- green
- resolver.tudelft.nl
- Licence
- other-oa
- www.springer.com/tdm (tdm)
- www.springer.com/tdm (vor)
- Locations
- Structural and Multidisciplinary Optimization (publishedVersion)
- Research Explorer (The University of Manchester) (submittedVersion)
- Research Repository (Delft University of Technology) (submittedVersion)
- Data Archiving and Networked Services (DANS) (submittedVersion, other-oa)
- Funders
- National Science Foundation (CMMI-1634261, CMMI 1462270)
- National Natural Science Foundation of China (61628211, 61432003, 51535012, U1604255)
- Hunan Provincial Science and Technology Department (2016JC2001)
- Topics
- Physical Sciences › Engineering › Civil and Structural Engineering › Topology Optimization in Engineering
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Additive Manufacturing and 3D Printing Technologies
- Physical Sciences › Engineering › Mechanical Engineering › Cellular and Composite Structures
- Keywords
- topology optimization, additive manufacturing, layer-by-layer assembly, geometric complexity, design for additive manufacturing
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.