Multi-objective optimization for sustainable turning Ti6Al4V alloy using grey relational analysis (GRA) based on analytic hierarchy process (AHP)
Open accessThe DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
Sustainable machining necessitates energy-efficient processes, longer tool lifespan, and greater surface integrity of the products in modern manufacturing. However, when considering Ti6Al4V alloy, these objectives turn out to be difficult to achieve as titanium alloys pose serious machinability challenges, especially at elevated temperatures. In this research, we investigate the optimal machining parameters required for turning of Ti6Al4V alloy. Turning experiments were performed to optimize four response parameters, i.e., specific cutting energy (SCE), wear rate (R), surface roughness (Ra), and material removal rate (MRR) with uncoated H13 carbide inserts in the dry cutting environment. Grey relational analysis (GRA) combined with the analytic hierarchy process (AHP) was performed to develop a multi-objective function. Response surface optimization was used to optimize the developed multi-objective function and determine the optimal cutting condition. As per the ANOVA, the interaction of feed rate and cutting speed (f × V) was found to be the most significant factor influencing the grey relational grade (GRG) of the multi-objective function. The optimized machining conditions increased the MRR and tool life by 34% and 7%, whereas, reducing the specific cutting energy and surface roughness by 6% and 2% respectively. Using Taguchi-based GRA by analytic hierarchy process (AHP) weights method, the benefits of high-speed machining Ti6Al4V through multi-response optimization were achieved.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Measurement and analysis of surface roughness in turning of aerospace titanium alloy (gr5)
Ramesh, S., Karunamoorthy, L., & Palanikumar, K. (2012) · Measurement · doi:10.1016/j.measurement.2012.01.010 · Cited by 151
Assessment of the machinability of Ti-6Al-4V alloy using the wear map approach
Jaffery, S. I., & Mativenga, P. T. (2009) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-008-1393-9 · Cited by 119
Self-citationWear mechanisms analysis for turning Ti-6Al-4V—towards the development of suitable tool coatings
Jaffery, S. H. I., & Mativenga, P. T. (2012) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-011-3427-y · Cited by 111 · cited 1×
“Titanium is well known to exhibit these attributes [5, 37].”
BackgroundSelf-citationTool Wear Progression and its Effect on Energy Consumption in Turning of Titanium Alloy (Ti-6Al-4V)
Younas, M., Jaffery, S. H. I., Khan, M., Ahmad, R., Ali, L., Khan, Z., & Khan, A. (2019) · Mechanical Sciences · doi:10.5194/ms-10-373-2019 · Cited by 37
Self-citation
Cited by
Younas, M., Jaffery, S. H. I., Khan, A., & Khan, M. (2021) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2020.12.060 · Cited by 78
“The importance of cutting speed and feed rate on controlling machining responses like tool wear, energy consumption, surface roughness, and material removal rate has been widely mentioned previously [43-45].”
BackgroundSelf-citationInvestigation of tool wear and energy consumption in machining Ti6Al4V alloy with uncoated tools
Younas, M., Khan, M., Jaffery, S. H. I., Khan, Z., & Khan, N. (2024) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-024-13548-1 · Cited by 17
Self-citationEnergy Consumption Analysis in Turning Ti-6Al-4V alloy
Imran Jaffery, S. H., Younas, M., Khan, M., & Ali, L. (2020) · 2020 IEEE 11th International Conference on Mechanical and Intelligent Manufacturing Technologies (ICMIMT) · doi:10.1109/icmimt49010.2020.9041194 · Cited by 9
Self-citationAssessment of Machinability of Ti6Al4V Alloy Under Dry Conditions
Younas, M., Mohammed Sambo, A., Asim, T., & Saharudin, S. (2024) · MATEC Web of Conferences · doi:10.1051/matecconf/202440106005 · Cited by 2
Self-citation
Metadata
- Authors
- Younas, M., Jaffery, S. H. I., Khan, M., Khan, M. A., Ahmad, R., Mubashar, A., & Ali, L.
- Venue
- The International Journal of Advanced Manufacturing Technology
- Published
- 2019-08-27
- Volume
- 105
- Issue
- 1-4
- Pages
- 1175-1188
- ISSN
- 0268-3768 (ISSN-L)
- 1433-3015
- OpenAlex
- W2970730875
- Cited by
- 117
- References
- 4
- FWCI
- 7.12
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.