Cited by 39Thermochemical Biomass Conversion ProcessesRecycling and utilization of industrial and municipal waste in materials productionMunicipal Solid Waste Management

Valorization of waste tire by pyrolysis and hydrothermal liquefaction: A mini-review

Hu, Yulin, Attia, Mai, Tsabet, Emir, Mohaddespour, Ahmad, Munir, Muhammad Tajammal, Farag, Sherif·2021·Journal of Material Cycles and Waste Management

Integrity signals

Registry

Crossref · 10.1007/s10163-021-01252-1

Cites

65 of 65 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Claims the paper makes

We couldn’t retrieve this paper’s full text, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

  • Hydrothermal liquefaction operates at moderate temperatures (200-400°C) and high pressures (5-25 MPa) in water, accommodating wet feedstocks without drying, whereas pyrolysis generally uses higher temperatures (300-800°C) at near-atmospheric pressure and typically requires dried feedstock.

    “Both hydrothermal liquefaction (HTL) and pyrolysis are thermochemical solid-toliquid conversion pathways, but HTL operates at moderate temperatures (typically 200-400 • C) and high pressures (5-25 MPa) in the presence of water, thus accommodating wet feedstocks without prior drying, whereas pyrolysis generally employs higher temperatures (300-800 • C) at near-atmospheric pressure and typically”
  • Hydrothermal liquefaction is promising for waste tires because it can process them effectively, yielding bio-crude oil with higher heating value, potentially higher alkane concentrations, and typically lower oxygen content compared to tire pyrolysis oils.

    “Hydrothermal liquefaction is considered a promising technology for waste tires because it can process them effectively, yielding a bio-crude oil that typically exhibits a higher heating value and potentially higher alkane concentrations and typically lower oxygen content compared to oils from tire pyrolysis [374].”

Cites

Flagged first, then by citations

Cited by

Authors
Hu, Y., Attia, M., Tsabet, E., Mohaddespour, A., Munir, M. T., & Farag, S.
Affiliations
  • American University of the Middle East (KW)
  • Université Mohammed VI Polytechnique (MA)
Corresponding author
Attia, Mai
Venue
Journal of Material Cycles and Waste Management
Published
2021-05-22
Volume
23
Issue
5
Pages
1737-1750
ISSN
  • 1438-4957 (ISSN-L)
  • 1611-8227
OpenAlex
W3164168559
Cited by
39
References
65
Citations by year
2026: 5 · 2025: 6 · 2024: 8 · 2023: 10 · 2022: 8 · 2021: 2
FWCI
0.59
Type
journal article
Language
en
Open access
closed
Locations
  • Journal of Material Cycles and Waste Management (publishedVersion)
  • IslandScholar (University of Prince Edward Island) (submittedVersion)
Topics
  • Physical Sciences › Engineering › Biomedical Engineering › Thermochemical Biomass Conversion Processes
  • Physical Sciences › Engineering › Building and Construction › Recycling and utilization of industrial and municipal waste in materials production
  • Physical Sciences › Environmental Science › Waste Management and Disposal › Municipal Solid Waste Management
Keywords
waste tire valorization, pyrolysis, hydrothermal liquefaction, liquid fuel production, BTEX, limonene, activated carbon alternative, wastewater treatment, filler reinforcement, thermochemical conversion

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review