The DOI matches its Crossref record; 318 of the 318 references it cites were found in a registry or an index.
Recent advances in carbon capture storage and utilisation technologies: a review
Open accessAbstract
Human activities have led to a massive increase in $$\hbox {CO}_{2}$$ CO 2 emissions as a primary greenhouse gas that is contributing to climate change with higher than $$1\,^{\circ }\hbox {C}$$ 1 ∘ C global warming than that of the pre-industrial level. We evaluate the three major technologies that are utilised for carbon capture: pre-combustion, post-combustion and oxyfuel combustion. We review the advances in carbon capture, storage and utilisation. We compare carbon uptake technologies with techniques of carbon dioxide separation. Monoethanolamine is the most common carbon sorbent; yet it requires a high regeneration energy of 3.5 GJ per tonne of $$\hbox {CO}_{2}$$ CO 2 . Alternatively, recent advances in sorbent technology reveal novel solvents such as a modulated amine blend with lower regeneration energy of 2.17 GJ per tonne of $$\hbox {CO}_{2}$$ CO 2 . Graphene-type materials show $$\hbox {CO}_{2}$$ CO 2 adsorption capacity of 0.07 mol/g, which is 10 times higher than that of specific types of activated carbon, zeolites and metal–organic frameworks. $$\hbox {CO}_{2}$$ CO 2 geosequestration provides an efficient and long-term strategy for storing the captured $$\hbox {CO}_{2}$$ CO 2 in geological formations with a global storage capacity factor at a Gt-scale within operational timescales. Regarding the utilisation route, currently, the gross global utilisation of $$\hbox {CO}_{2}$$ CO 2 is lower than 200 million tonnes per year, which is roughly negligible compared with the extent of global anthropogenic $$\hbox {CO}_{2}$$ CO 2 emissions, which is higher than 32,000 million tonnes per year. Herein, we review different $$\hbox {CO}_{2}$$ CO 2 utilisation methods such as direct routes, i.e. beverage carbonation, food packaging and oil recovery, chemical industries and fuels. Moreover, we investigated additional $$\hbox {CO}_{2}$$ CO 2 utilisation for base-load power generation, seasonal energy storage, and district cooling and cryogenic direct air $$\hbox {CO}_{2}$$ CO 2 capture using geothermal energy. Through bibliometric mapping, we identified the research gap in the literature within this field which requires future investigations, for instance, designing new and stable ionic liquids, pore size and selectivity of metal–organic frameworks and enhancing the adsorption capacity of novel solvents. Moreover, areas such as techno-economic evaluation of novel solvents, process design and dynamic simulation require further effort as well as research and development before pilot- and commercial-scale trials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“However, post-combustion capture systems are ideal for retrofit projects and have a wide range of applications (Fawzy et al. 2020; Osman et al. 2020).”
From Strategies to achieve a carbon neutral society: a review (2022) · cites this paper as Osman et al. 2020
In the citing paper
“In conclusion, carbon capture, utilization and storage, where carbon captured can be stored or utilized in production of chemicals, algae, and concrete building materials is an emerging technology that can play a pivotal role in achieving carbon emission reductions.”
From Strategies to achieve a carbon neutral society: a review (2022) · cites this paper as Osman et al. 2020
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Items 201–318 of 318
Effect of support material on the performance of K2CO3-based pellets for cyclic CO2 capture
Qin, C., Yin, J., Ran, J., Zhang, L., & Feng, B. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.09.043 · Cited by 78
Molecular Layer Deposition-Modified 5A Zeolite for Highly Efficient CO2 Capture
Song, Z., Dong, Q., Xu, W. L., Zhou, F., Liang, X., & Yu, M. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b16574 · Cited by 78
Chen, S., Zhu, M., Tang, Y., Fu, Y. J., Li, W., & Xiao, B. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta05647a · Cited by 78
Effect of exfoliation temperature on carbon dioxide capture of graphene nanoplates
Meng, L., & Park, S. (2012) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2012.07.025 · Cited by 76
Wang, Y., Wang, H., Zhang, T. C., Yuan, S., & Liang, B. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228610 · Cited by 76
Billig, E., Decker, M., Benzinger, W., Ketelsen, F., Pfeifer, P., Peters, R., Stolten, D., & Thrän, D. (2019) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2019.01.012 · Cited by 75
Ghosh, S., & Ramaprabhu, S. (2018) · Carbon · doi:10.1016/j.carbon.2018.09.083 · Cited by 74
Study on susceptibility of CO2-assisted pyrolysis of various biomass to CO2
Lee, J., Oh, J.-I., Ok, Y. S., & Kwon, E. E. (2017) · Energy · doi:10.1016/j.energy.2017.01.155 · Cited by 73
Levelized Cost of CO2 Captured Using Five Physical Solvents in Pre-combustion Applications
Ashkanani, H. E., Wang, R., Shi, W., et al. (2020) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2020.103135 · Cited by 73
Amines immobilized double-walled silica nanotubes for CO2 capture
Ko, Y. G., Lee, H. J., Oh, H. C., & Choi, U. S. (2013) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2013.01.035 · Cited by 71
Adsorption of Carbon Dioxide on 3-Aminopropyl-Triethoxysilane Modified Graphite Oxide
Hong, S. M., Kim, S. H., & Lee, K. B. (2013) · Energy & Fuels · doi:10.1021/ef400467w · Cited by 71
Portillo, E., Alonso‐Fariñas, B., Vega, F., Cano, M., & Navarrete, B. (2019) · Separation and Purification Technology · doi:10.1016/j.seppur.2019.115708 · Cited by 69
Jiamjirangkul, P., Inprasit, T., Intasanta, V., & Pangon, A. (2020) · Chemical Engineering Science · doi:10.1016/j.ces.2020.115650 · Cited by 69
Li, H., Yan, D., Zhang, Z., & Lichtfouse, E. A. (2019) · Environmental Chemistry Letters · doi:10.1007/s10311-019-00874-0 · Cited by 68
Chen, S., Yu, R., Soomro, A., & Xiang, W. (2019) · Energy · doi:10.1016/j.energy.2019.03.090 · Cited by 67
A robust metal–organic framework for post-combustion carbon dioxide capture
Qazvini, O. T., & Telfer, S. G. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta04121a · Cited by 67
Liu, L., Jin, S., Ko, K., Kim, H., Ahn, I., & Lee, C. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.122834 · Cited by 66
A carbon molecular sieve membrane-based reactive separation process for pre-combustion CO2 capture
Cao, M., Zhao, L., Xu, D., Ciora, R., Liu, P. K. T., Manousiouthakis, V. I., & Tsotsis, T. T. (2020) · Journal of Membrane Science · doi:10.1016/j.memsci.2020.118028 · Cited by 66
CO2 capture by ionic liquid membrane absorption for reduction of emissions of greenhouse gas
Lu, J.-G., Li, X., Zhao, Y., Ma, H.-L., Wang, L., Wang, X., Yu, Y.-F., Shen, T.-Y., Xu, H., & Zhang, Y. (2018) · Environmental Chemistry Letters · doi:10.1007/s10311-018-00822-4 · Cited by 65
Graphene-manganese oxide hybrid porous material and its application in carbon dioxide adsorption
Zhou, D., Liu, Q. L., Cheng, Q., Zhao, Y., Cui, Y., Wang, T., & Han, B. (2012) · Chinese Science Bulletin · doi:10.1007/s11434-012-5158-3 · Cited by 64
A developed solar-powered desalination system for enhancing fresh water productivity
Morad, M. M., El-Maghawry, H. A. M., & Wasfy, K. I. (2017) · Solar Energy · doi:10.1016/j.solener.2017.02.002 · Cited by 64
Gladis, A., Gundersen, M. T., Fosbøl, P. L., Woodley, J. M., & von Solms, N. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.10.056 · Cited by 63
Li, G., Xiao, P., Xu, D. Y., & Webley, P. A. (2011) · Chemical Engineering Science · doi:10.1016/j.ces.2011.01.023 · Cited by 62
Pourebrahimi, S., Kazemeini, M., Babakhani, E. G., & Taheri, A. (2015) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2015.07.013 · Cited by 61
Ayodele, B. V., Khan, M. M. R., & Cheng, C. K. (2015) · Journal of Natural Gas Science and Engineering · doi:10.1016/j.jngse.2015.09.049 · Cited by 61
Effective CH4 production from CO2 photoreduction using TiO2/xmol% Cu–TiO2 double-layered films
Park, M., Kwak, B. S., Jo, S. W., & Kang, M. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2015.06.029 · Cited by 61
Long-Term Effect of Steam Exposure on CO2 Capture Performance of Amine-Grafted Silica
Fayaz, M., & Sayari, A. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b15463 · Cited by 61
Economic and life-cycle greenhouse gas optimization of microalgae-to-biofuels chains
Wu, W., Lin, K.-H., & Chang, J. (2018) · Bioresource Technology · doi:10.1016/j.biortech.2018.07.083 · Cited by 59
Barzagli, F., Mani, F., & Peruzzini, M. (2015) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2015.12.006 · Cited by 58
Stanly, S., Jelmy, E. J., Nair, C. P. R., & John, H. (2019) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2019.103344 · Cited by 58
Two‐phase convective CO2 dissolution in saline aquifers
Martinez, M. J., & Hesse, M. A. (2016) · Water Resources Research · doi:10.1002/2015wr017085 · Cited by 57
Enhanced CO2 capture in Fe3O4-graphene nanocomposite by physicochemical adsorption
Mishra, A. K., & Ramaprabhu, S. (2014) · Journal of Applied Physics · doi:10.1063/1.4892458 · Cited by 56
Dong, F., Lou, H., Kodama, A., Goto, M., & Hirose, T. (1999) · Separation and Purification Technology · doi:10.1016/s1383-5866(98)00122-1 · Cited by 55
The influence of sodium hydrogen carbonate on the hydration of cement
Jang, J. G., Kim, H.-J., Park, S., et al. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.07.121 · Cited by 53
Farmahini, A. H., Friedrich, D., Brandani, S., & Sarkisov, L. (2020) · Energy & Environmental Science · doi:10.1039/c9ee03977e · Cited by 53
Pyrolysis of wastes generated through saccharification of oak tree by using CO2 as reaction medium
Kim, J.-E., Lee, J., Kim, K., Ok, Y. S., Jeon, Y. J., & Kwon, E. E. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.08.200 · Cited by 52
Lin, Y., Wang, W., & Chang, C.-Y. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta00275d · Cited by 52
Pyrolysis of food waste over a Pt catalyst in CO2 atmosphere
Kim, S., & Lee, J. (2020) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2020.122449 · Cited by 52
Kotowicz, J., & Balicki, A. (2014) · Energy Conversion and Management · doi:10.1016/j.enconman.2013.12.069 · Cited by 51
A highly active and synergistic Pt/Mo2C/Al2O3 catalyst for water-gas shift reaction
Osman, A. I., Abu‐Dahrieh, J. K., Cherkasov, N., et al. (2018) · Molecular Catalysis · doi:10.1016/j.mcat.2018.05.025 · Cited by 51
Self-citationYang, Q., Li, H., Wang, D., Zhang, X., Guo, X., Pu, S., Guo, R., & Chen, J. (2020) · Applied Energy · doi:10.1016/j.apenergy.2020.115502 · Cited by 51
Dual sensor streamer technology used in Sleipner CO2injection monitoring
Furre, A., & Eiken, O. (2014) · Geophysical Prospecting · doi:10.1111/1365-2478.12120 · Cited by 49
Highly selective CO 2 adsorption of ZnO based N-doped reduced graphene oxide porous nanomaterial
Li, W., Yang, H., Jiang, X., et al. (2015) · Applied Surface Science · doi:10.1016/j.apsusc.2015.10.212 · Cited by 49
Wannakao, S., Artrith, N., Limtrakul, J. P., & Kolpak, A. M. (2015) · ChemSusChem · doi:10.1002/cssc.201500245 · Cited by 49
Prospects of microalgal biodiesel production in Pakistan – A review
Ali, M., Sultana, R., Tahir, S., Watson, I., & Saleem, M. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.08.062 · Cited by 49
Structurally improved, urea-templated, K2CO3-based sorbent pellets for CO2 capture
Wang, P., Sun, J., Guo, Y., Zhao, C., Li, W., Wang, G., Lei, S., & Lu, P. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.05.091 · Cited by 49
MWCNTs-ZnO-SiO2 mesoporous nano-hybrid materials for CO2 capture
Jena, K. K., Panda, A. P., Verma, S. A., Mani, G. K., Swain, S. K., & Alhassan, S. M. (2019) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2019.06.011 · Cited by 48
Investigation of CO2 adsorption by bagasse-based activated carbon
Boonpoke, A., Chiarakorn, S., Laosiripojana, N., Towprayoon, S., & Chidthaisong, A. (2011) · Korean Journal of Chemical Engineering · doi:10.1007/s11814-011-0143-0 · Cited by 46
Ribeiro, J. D. O. N., Nunes, E. H. M., Vasconcelos, D. C. L., et al. (2019) · Journal of Porous Materials · doi:10.1007/s10934-019-00754-6 · Cited by 45
Mekonnen, T. H., Mussone, P. G., Choi, P. Y. K., & Bressler, D. C. (2014) · Macromolecular Materials and Engineering · doi:10.1002/mame.201300402 · Cited by 44
Kong, X., & Saar, M. O. (2013) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2013.08.020 · Cited by 44
Gao, J., Yin, J., Zhu, F., et al. (2016) · Separation and Purification Technology · doi:10.1016/j.seppur.2016.04.033 · Cited by 44
The effect of boric acid on the vapour liquid equilibrium of aqueous potassium carbonate
Endo, K., Nguyen, Q. S., Kentish, S. E., et al. (2011) · Fluid Phase Equilibria · doi:10.1016/j.fluid.2011.06.031 · Cited by 43
Khan, A. A., Halder, G., & Saha, A. K. (2015) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2015.11.020 · Cited by 43
Cho, D.-W., Kwon, E. E., & Song, H. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.03.027 · Cited by 43
Wang, Y., Guan, C., Wang, K., Guo, C., & Li, C. M. (2011) · Journal of Chemical & Engineering Data · doi:10.1021/je100840n · Cited by 43
CO2 gasification of biomass: The effect of lime concentration in a fluidised bed
Jeremiáš, M., Pohořelý, M., Svoboda, K., Skoblia, S., Beňo, Z., & Šyc, M. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.02.151 · Cited by 43
Tar formation during coal pyrolysis under N2 and CO2 atmospheres at elevated pressures
Luo, K., Zhang, C., Zhu, S., et al. (2016) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2016.01.009 · Cited by 42
Demonstration and Deployment of Carbon Dioxide Capture and Storage in Australia
Cook, P. J. (2009) · Energy Procedia · doi:10.1016/j.egypro.2009.02.188 · Cited by 41
A Sustainability Framework for Bioenergy with Carbon Capture and Storage (BECCS) Technologies
Pour, N., Webley, P. A., & Cook, P. J. (2017) · Energy Procedia · doi:10.1016/j.egypro.2017.03.1741 · Cited by 41
Effects of CO2 atmosphere on slow pyrolysis of high-ash lignite
Wang, Q., Li, K., Guo, Z., et al. (2018) · Carbon Resources Conversion · doi:10.1016/j.crcon.2018.04.002 · Cited by 41
Hefny, M., Qin, C., Saar, M. O., et al. (2020) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2020.103164 · Cited by 41
Self-citationEvaluation of CO2 utilization for methanol production via tri-reforming of methane
Rezaei, E., & Catalan, L. J. J. (2020) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2020.101272 · Cited by 41
Amino-decorated organosilica membranes for highly permeable CO2 capture
Guo, M., Kanezashi, M., Nagasawa, H., et al. (2020) · Journal of Membrane Science · doi:10.1016/j.memsci.2020.118328 · Cited by 40
Influence of channel geometry on Fischer-Tropsch synthesis in microstructured reactors
Piermartini, P., Boeltken, T., Selinsek, M., et al. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.12.076 · Cited by 39
Characterisation of Robust Combustion Catalyst from Aluminium Foil Waste
Osman, A. I., Abu‐Dahrieh, J. K., McLaren, M., Laffir, F. R., & Rooney, D. W. (2018) · ChemistrySelect · doi:10.1002/slct.201702660 · Cited by 39
Self-citationCatalytic pyrolysis of swine manure using CO2 and steel slag
Lee, D., Jeong, K.-H., Lee, D.-H., Lee, S.-H., Jung, M., Jang, Y. N., Jo, G., Kwag, J. H., Yi, H., Park, Y., et al. (2019) · Environment International · doi:10.1016/j.envint.2019.105204 · Cited by 37
Technology Innovation & Advancements for Shell Cansolv CO2 capture solvents
Campbell, M. (2014) · Energy Procedia · doi:10.1016/j.egypro.2014.11.090 · Cited by 36
Guizani, C., Louisnard, O., Sanz, F. J. E., et al. (2015) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2015.09.017 · Cited by 36
Gładysz, P., & Ziębik, A. (2015) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2015.12.008 · Cited by 36
Lima, M. G., Schädle, P., Green, C. P., Vogler, D., Saar, M. O., & Kong, X. (2020) · Water Resources Research · doi:10.1029/2020wr027213 · Cited by 36
Lee, T., Lee, J., Ok, Y. S., Oh, J.-I., Lee, S., Rinklebe, J., & Kwon, E. E. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.06.181 · Cited by 35
Azhand, N., Sadeghizadeh, A., & Rahimi, R. (2020) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2020.104022 · Cited by 35
Bimodal-porous hollow MgO sphere embedded mixed matrix membranes for CO2 capture
Lee, J. H., Im, K., Han, S., et al. (2020) · Separation and Purification Technology · doi:10.1016/j.seppur.2020.117065 · Cited by 34
Kinetics of carbon dioxide removal by ethylenediamine and diethylenetriamine in aqueous solutions
Salvi, A. P., Vaidya, P. D., & Kenig, E. Y. (2014) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.22064 · Cited by 33
Liu, J., & Lin, R.-B. (2013) · Powder Technology · doi:10.1016/j.powtec.2013.03.022 · Cited by 33
High CO2 absorption of O-carboxymethylchitosan synthesised from chitosan
Kumar, P., Faujdar, E., Singh, R. K., Paul, S., Kukrety, A., Chhibber, V. K., & Ray, S. S. (2018) · Environmental Chemistry Letters · doi:10.1007/s10311-018-0713-z · Cited by 33
Lin, L.-Y., & Bai, H. (2010) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2010.07.012 · Cited by 32
Lee, S., Lee, J., Lee, T., Tsang, Y. F., Jeong, K.-H., Oh, J.-I., & Kwon, E. E. (2017) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2017.09.018 · Cited by 32
Energy density enhancement via pyrolysis of paper mill sludge using CO2
Lee, J., Tsang, Y. F., Kim, S., Ok, Y. S., & Kwon, E. E. (2017) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2017.01.001 · Cited by 31
Computational Design of a Photoresponsive Metal–Organic Framework for Post Combustion Carbon Capture
Park, J., Suh, B. L., & Kim, J. (2020) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.0c01878 · Cited by 31
Promoting biofuels use in Spain: A cost-benefit analysis
Santamaría, M., & Oyarzún, D. A. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.04.192 · Cited by 29
Advantages from Combining CCS with Geothermal Energy
Miranda-Barbosa, E., Sigfússon, B., Carlsson, J., et al. (2017) · Energy Procedia · doi:10.1016/j.egypro.2017.03.1794 · Cited by 29
Prospects for the use of carbon dioxide in enhanced geothermal systems in Poland
Tarkowski, R., & Uliasz‐Misiak, B. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.05.036 · Cited by 29
Honda, S., Mori, T., Goto, H., & Sugimoto, H. (2014) · Polymer · doi:10.1016/j.polymer.2014.08.002 · Cited by 27
Ma, S., Chen, G., Zhu, S., et al. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.02.070 · Cited by 27
Pfister, M., Belaissaoui, B., & Favre, É. (2016) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.6b03969 · Cited by 27
Surface engineered silica mesospheres – A promising adsorbent for CO 2 capture
Minju, N., Nair, B. N., Mohamed, A. P., & ANANTHAKUMAR, S. (2017) · Separation and Purification Technology · doi:10.1016/j.seppur.2017.03.038 · Cited by 27
González‐Aparicio, I., Pérez–Fortes, M., Zucker, A., & Tzimas, E. (2017) · Energy Procedia · doi:10.1016/j.egypro.2017.03.1833 · Cited by 27
Long-term CO2 capture tests of Pd-based composite membranes with module configuration
Lee, C.-B., Lee, S.-W., Park, J. S., et al. (2013) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2013.04.053 · Cited by 26
Sanz-Pérez, E. S., Arencibia, A., Sanz, R., & Calleja, G. (2015) · RSC Advances · doi:10.1039/c5ra19105j · Cited by 26
Chen, S., Hu, J., & Xiang, W. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.12.070 · Cited by 26
Karnwiboon, K., Krajangpit, W., Supap, T., et al. (2019) · Separation and Purification Technology · doi:10.1016/j.seppur.2019.115744 · Cited by 26
Bio-regeneration of different rich CO2 absorption solvent via microalgae cultivation
Song, C., Liu, J., Qiu, Y., Xie, M., Sun, J., Qi, Y., Li, S., & Kitamura, Y. (2019) · Bioresource Technology · doi:10.1016/j.biortech.2019.121781 · Cited by 25
Amino acid-imprinted polymers as highly selective CO2 capture materials
Chaterjee, S., & Krupadam, R. J. (2018) · Environmental Chemistry Letters · doi:10.1007/s10311-018-0774-z · Cited by 24
Optimal sequestration of carbon dioxide and phosphorus in soils by gypsum amendment
Zhang, H., Liu, R., & Lal, R. (2016) · Environmental Chemistry Letters · doi:10.1007/s10311-016-0564-4 · Cited by 23
Twenty Years of Monitoring CO2 Injection at Sleipner
Eiken, O. (2019) · Cambridge University Press eBooks · doi:10.1017/9781316480724.014 · Cited by 23
Numerical analysis of an ion transport membrane system for oxy–fuel combustion
Shin, D., & Kang, S. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.09.016 · Cited by 22
Shi, B., Wu, E., Wu, W., et al. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.12.030 · Cited by 20
Carbo, M. C., Jansen, D., Hendriks, C. A., et al. (2009) · Energy Procedia · doi:10.1016/j.egypro.2009.01.065 · Cited by 19
Storage retention time of CO2 in sedimentary basing; Examples from petroleum systems
BRADSHAW, J., Boreham, C. J., & LAPEDALINA, F. (2005) · Elsevier eBooks · doi:10.1016/b978-008044704-9/50055-0 · Cited by 18
Huang, C., Chen, L., Tadikamalla, P. R., et al. (2020) · Journal of the Operational Research Society · doi:10.1080/01605682.2019.1678402 · Cited by 18
RECOVERY AND SEQUESTRATION OF CO2 FROM STATIONARY COMBUSTION SYSTEMS BY PHOTOSYNTHESIS OF MICROALGAE
Nakamura, T. (2003) · doi:10.2172/820930 · Cited by 17
Effect of CO 2 atmosphere on biomass pyrolysis and in‐line catalytic reforming
Ye, J., Xiao, J., Huo, X., et al. (2020) · International Journal of Energy Research · doi:10.1002/er.5602 · Cited by 17
Patterned Superomniphobic–Superomniphilic Surfaces: Templates for Site‐Selective Self‐Assembly
Kobaku, S. P. R., Kota, A. K., Lee, D. H., et al. (2012) · Angewandte Chemie · doi:10.1002/ange.201202823 · Cited by 17
Apak, R. (2007) · Environmental Progress · doi:10.1002/ep.10228 · Cited by 16
Enhanced thermal destruction of toxic microalgal biomass by using CO2
Jung, J., Lee, J., Kim, J.-E., Kim, K., Kim, H., Jeon, Y. J., & Kwon, E. E. (2016) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2016.05.161 · Cited by 16
Masel, R. I., Liu, Z., Di, Z., Chen, Q., Lutz, D. R., & Nereng, L. (2015) · RSC green chemistry series · doi:10.1039/9781782622444-00215 · Cited by 15
Carbon dioxide capture under ambient conditions using 2-chloroethylamine
Wang, J., Zhang, X., & Zhou, Y. L. (2011) · Environmental Chemistry Letters · doi:10.1007/s10311-011-0316-4 · Cited by 10
Vafajoo, L., Afshar, S. H. A., & Firouzbakht, B. (2009) · Computer-aided chemical engineering/Computer aided chemical engineering · doi:10.1016/s1570-7946(09)70115-4 · Cited by 9
Krishnamurthy, K. R. (2017) · doi:10.2172/1342508 · Cited by 6
Recovery and Sequestration of CO2 from Stationary Combustion Systems by Photosynthesis of Microalgae
Nakamura, T., & Senior, C. L. (2005) · doi:10.2172/892742 · Cited by 6
Düren, T. (2007) · Studies in surface science and catalysis · doi:10.1016/s0167-2991(07)81097-4 · Cited by 4
Sedimentary Basins and Petroleum Systems
SELLEY, R. C., & Sonnenberg, S. A. (2014) · Elsevier eBooks · doi:10.1016/b978-0-12-386031-6.00008-4 · Cited by 4
Fu, K., Sema, T., Liang, Z., et al. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie303149h · Cited by 2
Rock Physics and Heterogeneities Characterization Controlling Fluid flow in Reservoir Rocks
Hefny, M. (2020) · Repository for Publications and Research Data (ETH Zurich) · doi:10.3929/ethz-b-000445518 · Cited by 2
Self-citationHefny, M. (2019) · Repository for Publications and Research Data (ETH Zurich) · doi:10.3929/ethz-b-000377881 · Cited by 1
Self-citation
Research works printed but not linked: 5
- Abuilaiwi FA, Laoui T, Al-Harthi M, Atieh MA (2010) Modification and functionalization of multiwalled carbon nanotube (MWCNT) via fischer esterification. Arab J Sci Eng 35(1):37–48
- Brown DW (2000) A hot dry rock geothermal energy concept utilizing supercritical CO2 instead of water. In: Proceedings, twenty-fifth workshop on geothermal reservoir engineering, Stanford University, Stanford, California
- Bui M, Claire SA, Bardow A, Edward JA, Boston A, Brown S, Fennell PS, Fuss S, Galindo A, Hackett LA, Hallett JP, Herzog HJ, Jackson G, Kemper J, Krevor S, Maitland GC, Matuszewski M, Metcalfe IS, Petit C, Puxty G, Reimer J, Reiner DM, Rubin ES, Scott SA, Shah N, Smit B, Martin Trusler JP, Webley P, Wilcox J, Dowell NM (2018b) Carbon capture and storage (CCS): the way forward. Energy Environ Sci 11(5):1062–1176. ISSN 1754-5692. https://doi.org/10.1039/C7EE02342A · DOI · Paper page
- Doughty C, Pruess K, Benson SM, Hovorka SD, Knox PR, Green CT (2001) Capacity investigation of brine-bearing sands of the Frio Formation for geologic sequestration of CO$$_\text{2}$$. In: First national conference on carbon sequestration, May 14–17, Washington, DC, sponsored by National Energy Technology Laboratory, CD-ROM. GCCC Digital Publication Series #01-03
- Fleming MR, Adams BM, Randolph JB, Ogland-Hand JO, Kuehn TH, Buscheck TA, Bielicki JM, Saar MO (2018) High efficiency and large-scale subsurface energy storage with CO2. In: 43rd Workshop on geothermal reservoir engineering, Stanford, CA
Cited by
Sorted by citations
Strategies to achieve a carbon neutral society: a review
Chen, L., Msigwa, G., Yang, M., Osman, A. I., Fawzy, S., Rooney, D. W., & Yap, P.-S. (2022) · Environmental Chemistry Letters · doi:10.1007/s10311-022-01435-8 · Cited by 1,326
Self-citationCircular economy strategies for combating climate change and other environmental issues
Yang, M., Chen, L., Wang, J., Msigwa, G., Osman, A. I., Fawzy, S., Rooney, D. W., & Yap, P.-S. (2023) · Environmental Chemistry Letters · doi:10.1007/s10311-022-01499-6 · Cited by 835
Self-citationConversion of biomass to biofuels and life cycle assessment: a review
Osman, A. I., Mehta, N., Elgarahy, A. M., Al-Hinai, A., Al-Muhtaseb, A. H., & Rooney, D. W. (2021) · Environmental Chemistry Letters · doi:10.1007/s10311-021-01273-0 · Cited by 761
“The depletion of non-renewable fuel sources, accompanied with greenhouse gas emissions, has become a critical issue (Fawzy et al. 2020; Osman et al. 2021).”
BackgroundSelf-citationAdsorption of Carbon Dioxide for post-combustion capture: a review
Raganati, F., Miccio, F., & Ammendola, P. (2021) · Energy & Fuels · doi:10.1021/acs.energyfuels.1c01618 · Cited by 661
Osman, A. I., Fawzy, S., Farghali, M., El-Azazy, M., Elgarahy, A. M., Fahim, R. A., Maksoud, M. I. A. A., Ajlan, A. A., Yousry, M., Saleem, Y., et al. (2022) · Environmental Chemistry Letters · doi:10.1007/s10311-022-01424-x · Cited by 515
Self-citation
Metadata
- Authors
- Osman, A. I., Hefny, M., Abdel Maksoud, M. I. A., Elgarahy, A. M., & Rooney, D. W.
- Affiliations
- Queen's University Belfast (GB)
- South Valley University (EG)
- Port Said University (EG)
- Corresponding author
- Osman, Ahmed I.
- Venue
- Environmental Chemistry Letters
- Published
- 2020-11-22
- Volume
- 19
- Issue
- 2
- Pages
- 797-849
- ISSN
- 1610-3653 (ISSN-L)
- 1610-3661
- OpenAlex
- W3108603965
- Cited by
- 862
- References
- 318
- Citations by year
- 2026: 118 · 2025: 193 · 2024: 181 · 2023: 173 · 2022: 133 · 2021: 64
- FWCI
- 45.49
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Locations
- Environmental Chemistry Letters (publishedVersion, cc-by)
- Research Portal (Queen's University Belfast) (publishedVersion, cc-by)
- Repository for Publications and Research Data (ETH Zurich) (submittedVersion, cc-by)
- ETH Zürich Research Collection (cc-by)
- Funders
- Engineering and Physical Sciences Research Council (EP/S025545/1)
- Queen's University of Belfast
- Topics
- Physical Sciences › Chemical Engineering › Filtration and Separation › Carbon Dioxide Capture Technologies
- Physical Sciences › Environmental Science › Environmental Engineering › CO2 Sequestration and Geologic Interactions
- Physical Sciences › Environmental Science › Environmental Engineering › Industrial Gas Emission Control
- Keywords
- CO2 capture, carbon capture and storage, carbon capture and utilization, CO2 emissions, pre-combustion capture, post-combustion CO2 capture, oxy-fuel combustion, monoethanolamine, amine solvents, CO2 sorbents, graphene-based adsorbents, metal-organic frameworks, CO2 utilization, food packaging, enhanced oil recovery, baseload power, seasonal energy storage, district cooling, direct air capture, geothermal energy, CO2 separation
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
