CoChat

A New Radiocarbon Chronology for Ancient Iron Production in the Meroe Region of Sudan

Open access
Humphris, Jane, Scheibner, Thomas · 2017 · African Archaeological Review

The DOI matches its Crossref record; 55 of the 59 references it cites were found in a registry or an index; 1 of the 41 sources its claims cite were checked for support.

Abstract

Recent archaeometallurgical investigations in Sudan have provided 97 radiocarbon dates which are used here to present a new chronology for ancient iron production associated with the Kingdom of Kush. Understandings of the formation, stratigraphy and dating of metallurgical waste deposits are used to demonstrate that iron production was practiced in the Meroe area for more than 1000 years, potentially starting as early as the 25th Dynasty period. Likely dates for the emergence and ending of iron smelting are considered in relation to political, economic and socio-cultural developments. The value and potential of this new chronology are explored, for example, in terms of insights into scale of production over time and resulting indications of organisation and management of this ancient technology.

Overview

CoChat Summary

TL;DR

The paper presents 97 radiocarbon dates from slag mounds at Meroe and Hamadab to build a new chronology for ancient iron production in the Meroe region. It argues iron production spanned more than 1000 years, potentially beginning as early as the 25th Dynasty and ending in the early Medieval/transitional period.

Key findings

  • The 97 dates comprise 82 from 15 trenches in 5 slag mounds at Meroe and 15 from 5 trenches in 4 slag mounds at Hamadab. Bayesian modelling indicates two distinct production periods: an earlier eastern Meroe group (MIS4, MIS2, MIS3, MIS1/2) and a later group (MIS6 and Hamadab), with an apparent minimum hiatus of more than 200 years between them.
  • MIS4 contains the earliest slag deposits known at Meroe so far; its formation began at the latest in the fifth century BC and probably earlier. The earliest date from trench MIS4-3-13, context 4075 (R_Combine), has more than 75% of its probability distribution between 765–605 calBC in an open sequence or between 595–411 calBC in closed sequences; deposition continued to the fourth century BC and possibly to the second half of the second century BC.
  • MIS2 began between the second half of the fifth and second half of the third century BC and ended at the latest at the beginning of the second century BC. MIS3 was not created earlier than the beginning of the fourth century BC; MIS1/2 began in the first half of the fourth century BC and ended towards the end of the first century BC. MIS6 spans a maximum of c. 360 years from the end of the second to the first half of the sixth century AD, and Hamadab extends from the middle of the third to the mid-sixth century AD, with all Hamadab deposits ending between 532 and 560 calAD.
  • Overall, iron production potentially spanned well over 1000 years, starting possibly as early as the 25th Dynasty in the mid-eighth century, certainly flourishing from the sixth century BC, and ending during the early Medieval or transitional period at Meroe and Hamadab, where it started much later in the mid-third century AD.

Methods

  • Excavation trenches were placed in slag mounds at Meroe and Hamadab; charcoal samples were selected from lower, middle, and upper contexts, where possible embedded within slag fragments, and dated at the National Science Foundation Accelerator Mass Spectrometry Laboratory, University of Arizona.
  • All 97 radiocarbon dates were calibrated in OxCal v. 4.2.4 using IntCal13; Bayesian chronological models with stratigraphic constraints (sequences, phases, sequential phases, and R_Combine) were used to assess dates against visible stratigraphy and to eliminate inverse dates or potential outliers, especially those possibly affected by old wood.
  • A luminescence dating strategy was also implemented at MIS4 and Hamadab; the results support the dating span at MIS4 and the later end of the Hamadab radiocarbon sequences.

Limitations

  • Paper-stated: the exact stratigraphic positioning of all dates is not provided in this publication; slag mound formation may be haphazard and asynchronous, older material may be deposited over younger, original waste handling cannot be reconstructed, horizontal stratigraphy and inter-trench relationships are often elusive, and the oldest and/or latest metallurgical contexts may not yet have been sampled.
  • Paper-stated: old wood is possible because Acacia nilotica can lie dead for years and heartwood may be used; the calibration curve has wiggles, plateaus, and reverse segments (e.g. c.730–420 calBC, c.140–210 and 260–310 calAD; reverse c.330–260 calBC, 440–530 calAD); potential outliers were removed, so the chronology is conservative and may be refined.
  • Evident from the text: some trenches yielded only two or three dates, some slag mounds or sub-surface deposits have not been excavated, and the models are generally open sequences without defined outer start/end boundaries for each mound; no furnace structures were found below the furnace at MIS6, unlike the situation encountered on the north mound by Shinnie and Tylecote.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.1007/s10437-017-9267-x

Cites

55 of 55 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Figures

Fig. 1 Map of Meroe and Hamadab showing the locations of the sites and the slag mounds mentioned in the text (all images in full colour online)
Fig. 1 Map of Meroe and Hamadab showing the locations of the sites and the slag mounds mentioned in the text (all images in full colour online)CC-BY · From the PDF
Fig. 2 Section drawing of the west and north sections of trench MIS4-2-13 showing the typical location of charcoal samples selected for dating
Fig. 2 Section drawing of the west and north sections of trench MIS4-2-13 showing the typical location of charcoal samples selected for datingCC-BY · From the PDF
Image 3
CC-BY · From the PDF
T 01b - Model 1 Trench MIS4-4-13 (top) and MIS4-5-13 (bottom): Sequence (single samples)
T 01b - Model 1 Trench MIS4-4-13 (top) and MIS4-5-13 (bottom): Sequence (single samples)CC-BY · From the PDF
T 01b - Model 3 Trench MIS4-3-13: Sequence with R_Combine Date (2 dates from 1
T 01b - Model 3 Trench MIS4-3-13: Sequence with R_Combine Date (2 dates from 1CC-BY · From the PDF
sample taken from context 4075)
sample taken from context 4075)CC-BY · From the PDF
Image 7
CC-BY · From the PDF
Image 8
CC-BY · From the PDF
Table 01b - Model 4 Trench MIS4-3-13: Sequential Phases (2 dates from 1 sample taken from context 4075)
Table 01b - Model 4 Trench MIS4-3-13: Sequential Phases (2 dates from 1 sample taken from context 4075)CC-BY · From the PDF
Image 10
CC-BY · From the PDF
Table 01b - Model 5 Trench MIS4-3-13: Sequential Phases with R_Combine Date (2 dates from 1 sample taken from context 4075)
Table 01b - Model 5 Trench MIS4-3-13: Sequential Phases with R_Combine Date (2 dates from 1 sample taken from context 4075)CC-BY · From the PDF
Image 12
CC-BY · From the PDF
Table 01b - Model 6 Trench MIS4-3-13: Sequential Phases in Open Sequence (2 dates from 1 sample taken from context 4075)
Table 01b - Model 6 Trench MIS4-3-13: Sequential Phases in Open Sequence (2 dates from 1 sample taken from context 4075)CC-BY · From the PDF
T 02b Trench MIS2-1-13: Sequential Phases
T 02b Trench MIS2-1-13: Sequential PhasesCC-BY · From the PDF
Image 15
CC-BY · From the PDF
Table 03b - Model 1 Trench MIS3-1-13: Sequence
Table 03b - Model 1 Trench MIS3-1-13: SequenceCC-BY · From the PDF
Table 03b - Model 2 Trench MIS3-2-13: Sequence with Phases
Table 03b - Model 2 Trench MIS3-2-13: Sequence with PhasesCC-BY · From the PDF
Image 18
CC-BY · From the PDF
Table 03b - Model 2 Trench MIS3-3-13: Sequence with Phases
Table 03b - Model 2 Trench MIS3-3-13: Sequence with PhasesCC-BY · From the PDF
Image 20
CC-BY · From the PDF
Image 21
CC-BY · From the PDF
T 04b Trench MIS1/2-13: One Sequence Across Two Trenches
T 04b Trench MIS1/2-13: One Sequence Across Two TrenchesCC-BY · From the PDF
Image 23
CC-BY · From the PDF
Table 05b - Model 1 MIS6 Furnace Workshop: Sequence With R_Combine Date of Final Phase
Table 05b - Model 1 MIS6 Furnace Workshop: Sequence With R_Combine Date of Final PhaseCC-BY · From the PDF
Table 05b - Model 2 MIS6 Furnace Workshop: Sequence With Final Phase
Table 05b - Model 2 MIS6 Furnace Workshop: Sequence With Final PhaseCC-BY · From the PDF
Image 26
CC-BY · From the PDF
Image 27
CC-BY · From the PDF
Image 28
CC-BY · From the PDF
Image 29
CC-BY · From the PDF
Image 30
CC-BY · From the PDF
Image 31
CC-BY · From the PDF
Image 32
CC-BY · From the PDF
Image 33
CC-BY · From the PDF
Image 34
CC-BY · From the PDF
Image 35
CC-BY · From the PDF
Fig. 4 Current radiocarbon chronology for maximum time range of iron production at Meroe and Hamadab. The modelled potential maximum calBC / AD start and end dates of the slag mounds are
Fig. 4 Current radiocarbon chronology for maximum time range of iron production at Meroe and Hamadab. The modelled potential maximum calBC / AD start and end dates of the slag mounds areCC-BY · From the PDF

Verification

Claims the paper makes

1 Valid · 1 Not valid · 32 Not checked · 104 Own results and interpretations

44 more claims

Create a free account to see all 138 claims and to verify the 21 references still open.

See all claims — free account
  • It may state two separate claims as one. 54
  • Probably not a substantial claim. 48
  • The quote only partly states this claim. 5

Create a free account to see these claims.

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

Each contradiction between two passages listed here was confirmed by an independent check.

1 of 1

Citations

Cites

Research works printed but not linked: 15

  1. Abdelrahman, M. F. (2011). A new study concerning Kushite and post-Meroitic iron objects. In V. Rondot, F. Alpi, & F. Villeneuve (Eds.), La pioche et la plume: Autour du Soudan, du Liban et de la Jordanie. Hommages archéologiques à Patrice Lenoble (pp. 391–402). Paris: PUPS.
  2. Baud, M. (2008). The Meroitic royal city of Muweis: First steps into an urban settlement of riverine upper Nubia. Sudan & Nubia, 12, 52–63.
  3. Costin, C. L. (2005). Craft production. In H. D. G. Maschner & C. Chippindale (Eds.), Handbook of archaeological methods, volume II (pp. 1034–1099). New York: Altamira Press.
  4. Craddock, P. T. (1995). Early metal and mining production. Edinburgh: Edinburgh University Press.
  5. Dunham, D. (1963). The west and south cemeteries at Meroe, excavated by the late George Andrew Reisner. Boston: Museum of Fine Arts.
  6. Eze-Uzomaka, P. (2013). Iron and its influence on the prehistoric site of Lejja. In J. Humphris & T. Rehren (Eds.), The world of iron (pp. 3–9). London: Archetype.
  7. Grzymski, K. (2005). Meroe, the capital of Kush: Old problems and new discoveries. Sudan & Nubia, 9, 47–58.
  8. Grzymski, K. (2008). Recent research at the palaces and temples of Meroe: A contribution to the systematic study of the Meroitic civilization. In A. Łajtar & G. Wlodzimierz (Eds.), Between the cataracts. Proceedings of the 11th International Conference for Nubian Studies, Warsaw University 27 August-2 September 2006 (pp. 227–238). Warsaw: Polish Centre of Mediterranean Archaeology.
  9. Hinkel, F. W. (1977). The archaeological map of the Sudan I. A guide to its use and explanation of its principles. Berlin: Akademie Verlag.
  10. Hinkel, F. W. (2000). The pyramids of Meroe. Architecture, construction and reconstruction of a sacred landscape. Sudan & Nubia, 4, 11–26.
  11. Hinkel, M. (2015). Die hafire im Sudan. Eine untersuchung zur geschichte des frühen wasserspeicherbaus. (completed and edited by W. F. Reineke). The archaeological map of the Sudan, Supplement II. Bonn: Habelt-Verlag.
  12. Sayce, A. H. (1912). Second interim report on the excavations at Meroë in Ethiopia, part II—the historical results. Liverpool Annals of Archaeology and Anthropology, 4, 55–65.
  13. Scheibner, T. (2014). Entstehung, Ursprung und Nutzung. Die Hafire in Musawwarat es-Sufra und in der Keraba als Wirtschaftsbauten. In A. Lohwasser & P. Wolf (Eds.), Ein Forscherleben zwischen den Welten. Zum 80. Geburtstag von Steffen Wenig. Mitteilungen der Sudanarchäologischen Gesellschaft zu Berlin e. V., Sonderheft, 299–322.
  14. Shinnie, P. L. (1985). Iron working at Meroe. In P. L. Shinnie & R. Haaland (Eds.), African iron working—ancient and traditional (pp. 28–35). Oxford: Oxford University Press.
  15. Török, L. (2015). The periods of Kushite history, from the tenth century BC to the AD fourth century. Budapest: Ízisz Foundation.

Cited by

See all 44

Metadata

Authors
Humphris, J., & Scheibner, T.
Affiliations
  • University College London Qatar (QA)
  • Deutsches Archäologisches Institut, Zentrale (DE)
Corresponding author
Humphris, Jane
Venue
African Archaeological Review
Published
2017-09
Volume
34
Issue
3
Pages
377-413
ISSN
  • 0263-0338 (ISSN-L)
  • 1572-9842
OpenAlex
W2765374634
Cited by
44
References
59
Citations by year
2026: 1 · 2025: 1 · 2024: 2 · 2023: 3 · 2022: 2 · 2021: 7 · 2020: 20 · 2019: 2 · 2018: 3 · 2017: 2
FWCI
10.78
Type
journal article
Language
en
Open access
Locations
  • African Archaeological Review (publishedVersion, cc-by)
  • Apollo (University of Cambridge) (submittedVersion, cc-by)
  • UCL Discovery (University College London) (submittedVersion)
  • Apollo (cc-by)
Funders
University College London (UCL)
Topics
  • Social Sciences › Archeology › Metallurgy and Cultural Artifacts
  • Social Sciences › Archeology › Archaeology and ancient environmental studies
  • Social Sciences › Arts and Humanities › Archeology (arts and humanities) › Cultural Heritage Materials Analysis
Keywords
iron smelting, radiocarbon chronology, Meroe, Kingdom of Kush, archaeometallurgy, 25th Dynasty, production scale

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

The claim verdicts this report counts are experimental: their accuracy is not yet measured.

A language model drew the claims from the paper on 2026-11-18, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-11-18 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Cited sources are checked with a language model’s help (qwen3.8-omni-flash).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.